blob: 51c1af587f27b6b41f58584f83c4541d5f8b1187 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Hannes Petermaier3c5fabd2014-03-06 14:39:06 +01002/*
Hannes Schmelzere880a5e2018-01-09 19:01:32 +01003 * Copyright (C) 2013-2018 Hannes Schmelzer <oe5hpm@oevsv.at>
4 * B&R Industrial Automation GmbH - http://www.br-automation.com
Hannes Petermaier3c5fabd2014-03-06 14:39:06 +01005 *
6 * minimal framebuffer driver for TI's AM335x SoC to be compatible with
7 * Wolfgang Denk's LCD-Framework (CONFIG_LCD, common/lcd.c)
8 *
Martin Pietryka7d045172016-04-27 21:39:15 +02009 * - supporting 16/24/32bit RGB/TFT raster Mode (not using palette)
Hannes Petermaier3c5fabd2014-03-06 14:39:06 +010010 * - sets up LCD controller as in 'am335x_lcdpanel' struct given
11 * - starts output DMA from gd->fb_base buffer
Hannes Petermaier3c5fabd2014-03-06 14:39:06 +010012 */
13#include <common.h>
Hannes Schmelzer8a094f52018-01-09 19:01:34 +010014#include <asm/io.h>
Hannes Petermaier3c5fabd2014-03-06 14:39:06 +010015#include <asm/arch/hardware.h>
Hannes Schmelzer8a094f52018-01-09 19:01:34 +010016#include <asm/arch/omap.h>
17#include <asm/arch/clock.h>
18#include <asm/arch/sys_proto.h>
Hannes Petermaier3c5fabd2014-03-06 14:39:06 +010019#include <lcd.h>
20#include "am335x-fb.h"
21
22#if !defined(LCD_CNTL_BASE)
23#error "hw-base address of LCD-Controller (LCD_CNTL_BASE) not defined!"
24#endif
25
Hannes Schmelzer8a094f52018-01-09 19:01:34 +010026#define LCDC_FMAX 200000000
Hannes Petermaier3c5fabd2014-03-06 14:39:06 +010027
28/* LCD Control Register */
29#define LCD_CLK_DIVISOR(x) ((x) << 8)
30#define LCD_RASTER_MODE 0x01
31/* LCD Clock Enable Register */
32#define LCD_CORECLKEN (0x01 << 0)
33#define LCD_LIDDCLKEN (0x01 << 1)
34#define LCD_DMACLKEN (0x01 << 2)
35/* LCD DMA Control Register */
36#define LCD_DMA_BURST_SIZE(x) ((x) << 4)
37#define LCD_DMA_BURST_1 0x0
38#define LCD_DMA_BURST_2 0x1
39#define LCD_DMA_BURST_4 0x2
40#define LCD_DMA_BURST_8 0x3
41#define LCD_DMA_BURST_16 0x4
42/* LCD Timing_0 Register */
43#define LCD_HBPLSB(x) ((((x)-1) & 0xFF) << 24)
44#define LCD_HFPLSB(x) ((((x)-1) & 0xFF) << 16)
45#define LCD_HSWLSB(x) ((((x)-1) & 0x3F) << 10)
46#define LCD_HORLSB(x) (((((x) >> 4)-1) & 0x3F) << 4)
47#define LCD_HORMSB(x) (((((x) >> 4)-1) & 0x40) >> 4)
48/* LCD Timing_1 Register */
49#define LCD_VBP(x) ((x) << 24)
50#define LCD_VFP(x) ((x) << 16)
51#define LCD_VSW(x) (((x)-1) << 10)
52#define LCD_VERLSB(x) (((x)-1) & 0x3FF)
53/* LCD Timing_2 Register */
54#define LCD_HSWMSB(x) ((((x)-1) & 0x3C0) << 21)
55#define LCD_VERMSB(x) ((((x)-1) & 0x400) << 16)
56#define LCD_HBPMSB(x) ((((x)-1) & 0x300) >> 4)
57#define LCD_HFPMSB(x) ((((x)-1) & 0x300) >> 8)
58#define LCD_INVMASK(x) ((x) & 0x3F00000)
59/* LCD Raster Ctrl Register */
60#define LCD_TFT_24BPP_MODE (1 << 25)
61#define LCD_TFT_24BPP_UNPACK (1 << 26)
Martin Pietrykaac5c61b2016-04-25 21:25:07 +020062#define LCD_PALMODE_RAWDATA (0x02 << 20)
Hannes Petermaier3c5fabd2014-03-06 14:39:06 +010063#define LCD_TFT_MODE (0x01 << 7)
64#define LCD_RASTER_ENABLE (0x01 << 0)
65
66
67/* Macro definitions */
68#define FBSIZE(x) ((x->hactive * x->vactive * x->bpp) >> 3)
69
70struct am335x_lcdhw {
71 unsigned int pid; /* 0x00 */
72 unsigned int ctrl; /* 0x04 */
73 unsigned int gap0; /* 0x08 */
74 unsigned int lidd_ctrl; /* 0x0C */
75 unsigned int lidd_cs0_conf; /* 0x10 */
76 unsigned int lidd_cs0_addr; /* 0x14 */
77 unsigned int lidd_cs0_data; /* 0x18 */
78 unsigned int lidd_cs1_conf; /* 0x1C */
79 unsigned int lidd_cs1_addr; /* 0x20 */
80 unsigned int lidd_cs1_data; /* 0x24 */
81 unsigned int raster_ctrl; /* 0x28 */
82 unsigned int raster_timing0; /* 0x2C */
83 unsigned int raster_timing1; /* 0x30 */
84 unsigned int raster_timing2; /* 0x34 */
85 unsigned int raster_subpanel; /* 0x38 */
86 unsigned int raster_subpanel2; /* 0x3C */
87 unsigned int lcddma_ctrl; /* 0x40 */
88 unsigned int lcddma_fb0_base; /* 0x44 */
89 unsigned int lcddma_fb0_ceiling; /* 0x48 */
90 unsigned int lcddma_fb1_base; /* 0x4C */
91 unsigned int lcddma_fb1_ceiling; /* 0x50 */
92 unsigned int sysconfig; /* 0x54 */
93 unsigned int irqstatus_raw; /* 0x58 */
94 unsigned int irqstatus; /* 0x5C */
95 unsigned int irqenable_set; /* 0x60 */
96 unsigned int irqenable_clear; /* 0x64 */
97 unsigned int gap1; /* 0x68 */
98 unsigned int clkc_enable; /* 0x6C */
99 unsigned int clkc_reset; /* 0x70 */
100};
101
102static struct am335x_lcdhw *lcdhw = (void *)LCD_CNTL_BASE;
Hannes Schmelzer8a094f52018-01-09 19:01:34 +0100103
Hannes Petermaier3c5fabd2014-03-06 14:39:06 +0100104DECLARE_GLOBAL_DATA_PTR;
105
106int lcd_get_size(int *line_length)
107{
108 *line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8;
109 return *line_length * panel_info.vl_row + 0x20;
110}
111
112int am335xfb_init(struct am335x_lcdpanel *panel)
113{
Martin Pietryka7d045172016-04-27 21:39:15 +0200114 u32 raster_ctrl = 0;
115
Hannes Schmelzer8a094f52018-01-09 19:01:34 +0100116 struct cm_dpll *const cmdpll = (struct cm_dpll *)CM_DPLL;
117 struct dpll_params dpll_disp = { 1, 0, 1, -1, -1, -1, -1 };
118 unsigned int m, n, d, best_d = 2;
119 int err = 0, err_r = 0;
120
Hannes Schmelzer0d8a7d62018-01-09 19:01:33 +0100121 if (gd->fb_base == 0) {
Hannes Petermaier3c5fabd2014-03-06 14:39:06 +0100122 printf("ERROR: no valid fb_base stored in GLOBAL_DATA_PTR!\n");
123 return -1;
124 }
Hannes Schmelzer0d8a7d62018-01-09 19:01:33 +0100125 if (panel == NULL) {
Hannes Petermaier3c5fabd2014-03-06 14:39:06 +0100126 printf("ERROR: missing ptr to am335x_lcdpanel!\n");
127 return -1;
128 }
129
Martin Pietryka7d045172016-04-27 21:39:15 +0200130 /* We can already set the bits for the raster_ctrl in this check */
131 switch (panel->bpp) {
132 case 16:
133 break;
134 case 32:
135 raster_ctrl |= LCD_TFT_24BPP_UNPACK;
136 /* fallthrough */
137 case 24:
138 raster_ctrl |= LCD_TFT_24BPP_MODE;
139 break;
140 default:
Masahiro Yamada9b643e32017-09-16 14:10:41 +0900141 pr_err("am335x-fb: invalid bpp value: %d\n", panel->bpp);
Martin Pietryka7d045172016-04-27 21:39:15 +0200142 return -1;
143 }
144
Hannes Schmelzer8a094f52018-01-09 19:01:34 +0100145 /* check given clock-frequency */
146 if (panel->pxl_clk > (LCDC_FMAX / 2)) {
147 pr_err("am335x-fb: requested pxl-clk: %d not supported!\n",
148 panel->pxl_clk);
149 return -1;
150 }
151
Hannes Petermaier3c5fabd2014-03-06 14:39:06 +0100152 debug("setting up LCD-Controller for %dx%dx%d (hfp=%d,hbp=%d,hsw=%d / ",
153 panel->hactive, panel->vactive, panel->bpp,
154 panel->hfp, panel->hbp, panel->hsw);
Hannes Schmelzer8a094f52018-01-09 19:01:34 +0100155 debug("vfp=%d,vbp=%d,vsw=%d / clk=%d)\n",
156 panel->vfp, panel->vfp, panel->vsw, panel->pxl_clk);
Hannes Petermaier3c5fabd2014-03-06 14:39:06 +0100157 debug("using frambuffer at 0x%08x with size %d.\n",
158 (unsigned int)gd->fb_base, FBSIZE(panel));
159
Hannes Schmelzer8a094f52018-01-09 19:01:34 +0100160 /* setup display pll for requested clock frequency */
161 err = panel->pxl_clk;
162 err_r = err;
163
164 for (d = 2; d < 255; d++) {
165 for (m = 2; m < 2047; m++) {
166 if ((V_OSCK * m) < (panel->pxl_clk * d))
167 continue;
168 n = (V_OSCK * m) / (panel->pxl_clk * d);
169 if (n > 127)
170 break;
171 if (((V_OSCK * m) / n) > LCDC_FMAX)
172 break;
173
174 err = abs((V_OSCK * m) / n / d - panel->pxl_clk);
175 if (err < err_r) {
176 err_r = err;
177 dpll_disp.m = m;
178 dpll_disp.n = n;
179 best_d = d;
180 }
181 }
182 }
183 debug("%s: PLL: best error %d Hz (M %d, N %d, DISP %d)\n",
184 __func__, err_r, dpll_disp.m, dpll_disp.n, best_d);
185 do_setup_dpll(&dpll_disp_regs, &dpll_disp);
186
187 /* clock source for LCDC from dispPLL M2 */
188 writel(0x0, &cmdpll->clklcdcpixelclk);
189
Hannes Petermaier3c5fabd2014-03-06 14:39:06 +0100190 /* palette default entry */
191 memset((void *)gd->fb_base, 0, 0x20);
192 *(unsigned int *)gd->fb_base = 0x4000;
Martin Pietryka3d47b2d2016-04-27 21:39:16 +0200193 /* point fb behind palette */
194 gd->fb_base += 0x20;
Hannes Petermaier3c5fabd2014-03-06 14:39:06 +0100195
Hannes Petermaier3b4e16e2015-02-03 13:22:23 +0100196 /* turn ON display through powercontrol function if accessible */
Hannes Schmelzer0d8a7d62018-01-09 19:01:33 +0100197 if (panel->panel_power_ctrl != NULL)
Hannes Petermaier3b4e16e2015-02-03 13:22:23 +0100198 panel->panel_power_ctrl(1);
199
200 debug("am335x-fb: wait for stable power ...\n");
201 mdelay(panel->pup_delay);
Hannes Petermaier3c5fabd2014-03-06 14:39:06 +0100202 lcdhw->clkc_enable = LCD_CORECLKEN | LCD_LIDDCLKEN | LCD_DMACLKEN;
203 lcdhw->raster_ctrl = 0;
Hannes Schmelzer8a094f52018-01-09 19:01:34 +0100204 lcdhw->ctrl = LCD_CLK_DIVISOR(best_d) | LCD_RASTER_MODE;
Hannes Petermaier3c5fabd2014-03-06 14:39:06 +0100205 lcdhw->lcddma_fb0_base = gd->fb_base;
Martin Pietryka3d47b2d2016-04-27 21:39:16 +0200206 lcdhw->lcddma_fb0_ceiling = gd->fb_base + FBSIZE(panel);
Hannes Petermaier3c5fabd2014-03-06 14:39:06 +0100207 lcdhw->lcddma_fb1_base = gd->fb_base;
Martin Pietryka3d47b2d2016-04-27 21:39:16 +0200208 lcdhw->lcddma_fb1_ceiling = gd->fb_base + FBSIZE(panel);
Hannes Petermaier3c5fabd2014-03-06 14:39:06 +0100209 lcdhw->lcddma_ctrl = LCD_DMA_BURST_SIZE(LCD_DMA_BURST_16);
210
211 lcdhw->raster_timing0 = LCD_HORLSB(panel->hactive) |
212 LCD_HORMSB(panel->hactive) |
213 LCD_HFPLSB(panel->hfp) |
214 LCD_HBPLSB(panel->hbp) |
215 LCD_HSWLSB(panel->hsw);
216 lcdhw->raster_timing1 = LCD_VBP(panel->vbp) |
217 LCD_VFP(panel->vfp) |
218 LCD_VSW(panel->vsw) |
219 LCD_VERLSB(panel->vactive);
220 lcdhw->raster_timing2 = LCD_HSWMSB(panel->hsw) |
221 LCD_VERMSB(panel->vactive) |
222 LCD_INVMASK(panel->pol) |
223 LCD_HBPMSB(panel->hbp) |
224 LCD_HFPMSB(panel->hfp) |
225 0x0000FF00; /* clk cycles for ac-bias */
Martin Pietryka7d045172016-04-27 21:39:15 +0200226 lcdhw->raster_ctrl = raster_ctrl |
Hannes Petermaier3c5fabd2014-03-06 14:39:06 +0100227 LCD_PALMODE_RAWDATA |
228 LCD_TFT_MODE |
229 LCD_RASTER_ENABLE;
230
Hannes Petermaier3b4e16e2015-02-03 13:22:23 +0100231 debug("am335x-fb: waiting picture to be stable.\n.");
232 mdelay(panel->pon_delay);
Hannes Petermaier3c5fabd2014-03-06 14:39:06 +0100233
234 return 0;
235}