blob: 69c51bc4c30c49e810f3dc8dde8a6f7b237fbe5d [file] [log] [blame]
Frederik Kriewitzc35d7cf2009-08-23 12:56:42 +02001/*
2 * (C) Copyright 2006-2008
3 * Texas Instruments.
4 * Richard Woodruff <r-woodruff2@ti.com>
5 * Syed Mohammed Khasim <x0khasim@ti.com>
6 *
7 * (C) Copyright 2009
8 * Frederik Kriewitz <frederik@kriewitz.eu>
9 *
10 * Configuration settings for the DevKit8000 board.
11 *
Wolfgang Denk3765b3e2013-10-07 13:07:26 +020012 * SPDX-License-Identifier: GPL-2.0+
Frederik Kriewitzc35d7cf2009-08-23 12:56:42 +020013 */
14
15#ifndef __CONFIG_H
16#define __CONFIG_H
Frederik Kriewitzc35d7cf2009-08-23 12:56:42 +020017
18/* High Level Configuration Options */
Frederik Kriewitzc35d7cf2009-08-23 12:56:42 +020019#define CONFIG_OMAP 1 /* in a TI OMAP core */
20#define CONFIG_OMAP34XX 1 /* which is a 34XX */
Frederik Kriewitzc35d7cf2009-08-23 12:56:42 +020021#define CONFIG_OMAP3_DEVKIT8000 1 /* working with DevKit8000 */
Simon Schwarz2d52a9a2012-03-15 04:01:40 +000022#define CONFIG_MACH_TYPE MACH_TYPE_DEVKIT8000
Marek Vasut308252a2012-07-21 05:02:23 +000023#define CONFIG_OMAP_GPIO
Lokesh Vutla806d2792013-07-30 11:36:30 +053024#define CONFIG_OMAP_COMMON
Marek Vasut308252a2012-07-21 05:02:23 +000025
Simon Schwarz5183b7e2011-12-05 23:16:28 +000026/*
27 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
28 * 64 bytes before this address should be set aside for u-boot.img's
29 * header. That is 0x800FFFC0--0x80100000 should not be used for any
30 * other needs.
31 */
32#define CONFIG_SYS_TEXT_BASE 0x80100000
Thomas Weber66fca012010-10-18 15:38:15 +020033
Vaibhav Hiremathcae377b2010-06-07 15:20:34 -040034#define CONFIG_SDRC /* The chip has SDRC controller */
35
Frederik Kriewitzc35d7cf2009-08-23 12:56:42 +020036#include <asm/arch/cpu.h> /* get chip and board defs */
37#include <asm/arch/omap3.h>
38
39/* Display CPU and Board information */
40#define CONFIG_DISPLAY_CPUINFO 1
41#define CONFIG_DISPLAY_BOARDINFO 1
42
43/* Clock Defines */
44#define V_OSCK 26000000 /* Clock output from T2 */
45#define V_SCLK (V_OSCK >> 1)
46
Frederik Kriewitzc35d7cf2009-08-23 12:56:42 +020047#define CONFIG_MISC_INIT_R
48
49#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
50#define CONFIG_SETUP_MEMORY_TAGS 1
51#define CONFIG_INITRD_TAG 1
52#define CONFIG_REVISION_TAG 1
53
Grant Likely2fa8ca92011-03-28 09:59:07 +000054#define CONFIG_OF_LIBFDT 1
55
Frederik Kriewitzc35d7cf2009-08-23 12:56:42 +020056/* Size of malloc() pool */
Sandeep Paulraj9c44ddc2009-09-09 11:50:40 -040057#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
Frederik Kriewitzc35d7cf2009-08-23 12:56:42 +020058 /* Sector */
Sandeep Paulraj9c44ddc2009-09-09 11:50:40 -040059#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
Frederik Kriewitzc35d7cf2009-08-23 12:56:42 +020060
61/* Hardware drivers */
Frederik Kriewitzc35d7cf2009-08-23 12:56:42 +020062/* DM9000 */
Frederik Kriewitzc35d7cf2009-08-23 12:56:42 +020063#define CONFIG_NET_RETRY_COUNT 20
64#define CONFIG_DRIVER_DM9000 1
65#define CONFIG_DM9000_BASE 0x2c000000
66#define DM9000_IO CONFIG_DM9000_BASE
67#define DM9000_DATA (CONFIG_DM9000_BASE + 0x400)
68#define CONFIG_DM9000_USE_16BIT 1
69#define CONFIG_DM9000_NO_SROM 1
70#undef CONFIG_DM9000_DEBUG
71
72/* NS16550 Configuration */
73#define CONFIG_SYS_NS16550
74#define CONFIG_SYS_NS16550_SERIAL
75#define CONFIG_SYS_NS16550_REG_SIZE (-4)
76#define CONFIG_SYS_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
77
78/* select serial console configuration */
79#define CONFIG_CONS_INDEX 3
80#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
81#define CONFIG_SERIAL3 3
82#define CONFIG_BAUDRATE 115200
83#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
84 115200}
85
86/* MMC */
Tom Rinif4085012011-09-03 21:52:45 -040087#define CONFIG_GENERIC_MMC 1
Frederik Kriewitzc35d7cf2009-08-23 12:56:42 +020088#define CONFIG_MMC 1
Tom Rinif4085012011-09-03 21:52:45 -040089#define CONFIG_OMAP_HSMMC 1
Frederik Kriewitzc35d7cf2009-08-23 12:56:42 +020090#define CONFIG_DOS_PARTITION 1
91
92/* I2C */
Heiko Schocher6789e842013-10-22 11:03:18 +020093#define CONFIG_SYS_I2C
94#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
95#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
96#define CONFIG_SYS_I2C_OMAP34XX
Frederik Kriewitzc35d7cf2009-08-23 12:56:42 +020097
98/* TWL4030 */
99#define CONFIG_TWL4030_POWER 1
100#define CONFIG_TWL4030_LED 1
101
102/* Board NAND Info */
103#define CONFIG_SYS_NO_FLASH /* no NOR flash */
104#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
105#define MTDIDS_DEFAULT "nand0=nand"
106#define MTDPARTS_DEFAULT "mtdparts=nand:" \
107 "512k(x-loader)," \
108 "1920k(u-boot)," \
109 "128k(u-boot-env)," \
110 "4m(kernel)," \
111 "-(fs)"
112
113#define CONFIG_NAND_OMAP_GPMC
114#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
115 /* to access nand */
116#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
117 /* to access nand at */
118 /* CS0 */
Frederik Kriewitzc35d7cf2009-08-23 12:56:42 +0200119#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
120 /* devices */
Frederik Kriewitzc35d7cf2009-08-23 12:56:42 +0200121#define CONFIG_JFFS2_NAND
122/* nand device jffs2 lives on */
123#define CONFIG_JFFS2_DEV "nand0"
124/* start of jffs2 partition */
125#define CONFIG_JFFS2_PART_OFFSET 0x680000
126#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */
127 /* partition */
128
129/* commands to include */
130#include <config_cmd_default.h>
131
132#define CONFIG_CMD_DHCP /* DHCP support */
133#define CONFIG_CMD_EXT2 /* EXT2 Support */
134#define CONFIG_CMD_FAT /* FAT support */
135#define CONFIG_CMD_I2C /* I2C serial bus support */
136#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
137#define CONFIG_CMD_MMC /* MMC support */
138#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */
139#define CONFIG_CMD_NAND /* NAND support */
140#define CONFIG_CMD_NAND_LOCK_UNLOCK /* nand (un)lock commands */
141
142#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
143#undef CONFIG_CMD_IMI /* iminfo */
144
145/* BOOTP/DHCP options */
146#define CONFIG_BOOTP_SUBNETMASK
147#define CONFIG_BOOTP_GATEWAY
148#define CONFIG_BOOTP_HOSTNAME
149#define CONFIG_BOOTP_NISDOMAIN
150#define CONFIG_BOOTP_BOOTPATH
151#define CONFIG_BOOTP_BOOTFILESIZE
152#define CONFIG_BOOTP_DNS
153#define CONFIG_BOOTP_DNS2
154#define CONFIG_BOOTP_SEND_HOSTNAME
155#define CONFIG_BOOTP_NTPSERVER
156#define CONFIG_BOOTP_TIMEOFFSET
157#undef CONFIG_BOOTP_VENDOREX
158
159/* Environment information */
160#define CONFIG_ENV_OVERWRITE /* allow to overwrite serial and ethaddr */
161
162#define CONFIG_BOOTDELAY 3
163
164#define CONFIG_EXTRA_ENV_SETTINGS \
165 "loadaddr=0x82000000\0" \
Thomas Weber2d76da22011-09-18 22:43:58 +0000166 "console=ttyO2,115200n8\0" \
Tom Rinif4085012011-09-03 21:52:45 -0400167 "mmcdev=0\0" \
Frederik Kriewitzc35d7cf2009-08-23 12:56:42 +0200168 "vram=12M\0" \
169 "dvimode=1024x768MR-16@60\0" \
170 "defaultdisplay=dvi\0" \
171 "nfsopts=hard,tcp,rsize=65536,wsize=65536\0" \
172 "kernelopts=rw\0" \
173 "commonargs=" \
174 "setenv bootargs console=${console} " \
175 "vram=${vram} " \
176 "omapfb.mode=dvi:${dvimode} " \
177 "omapdss.def_disp=${defaultdisplay}\0" \
178 "mmcargs=" \
179 "run commonargs; " \
180 "setenv bootargs ${bootargs} " \
181 "root=/dev/mmcblk0p2 " \
Andreas Bießmannb72db202012-08-30 23:53:32 +0000182 "rootwait " \
Frederik Kriewitzc35d7cf2009-08-23 12:56:42 +0200183 "${kernelopts}\0" \
184 "nandargs=" \
185 "run commonargs; " \
186 "setenv bootargs ${bootargs} " \
187 "omapfb.mode=dvi:${dvimode} " \
188 "omapdss.def_disp=${defaultdisplay} " \
189 "root=/dev/mtdblock4 " \
190 "rootfstype=jffs2 " \
191 "${kernelopts}\0" \
192 "netargs=" \
193 "run commonargs; " \
194 "setenv bootargs ${bootargs} " \
195 "root=/dev/nfs " \
196 "nfsroot=${serverip}:${rootpath},${nfsopts} " \
197 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off " \
198 "${kernelopts} " \
199 "dnsip1=${dnsip} " \
200 "dnsip2=${dnsip2}\0" \
Tom Rinif4085012011-09-03 21:52:45 -0400201 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
Frederik Kriewitzc35d7cf2009-08-23 12:56:42 +0200202 "bootscript=echo Running bootscript from mmc ...; " \
203 "source ${loadaddr}\0" \
Tom Rinif4085012011-09-03 21:52:45 -0400204 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
Frederik Kriewitzc35d7cf2009-08-23 12:56:42 +0200205 "eraseenv=nand unlock 0x260000 0x20000; nand erase 0x260000 0x20000\0" \
206 "mmcboot=echo Booting from mmc ...; " \
207 "run mmcargs; " \
208 "bootm ${loadaddr}\0" \
209 "nandboot=echo Booting from nand ...; " \
210 "run nandargs; " \
211 "nand read ${loadaddr} 280000 400000; " \
212 "bootm ${loadaddr}\0" \
213 "netboot=echo Booting from network ...; " \
214 "dhcp ${loadaddr}; " \
215 "run netargs; " \
216 "bootm ${loadaddr}\0" \
Andrew Bradford66968112012-10-01 05:06:52 +0000217 "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
Frederik Kriewitzc35d7cf2009-08-23 12:56:42 +0200218 "if run loadbootscript; then " \
219 "run bootscript; " \
220 "else " \
221 "if run loaduimage; then " \
222 "run mmcboot; " \
223 "else run nandboot; " \
224 "fi; " \
225 "fi; " \
226 "else run nandboot; fi\0"
227
228
229#define CONFIG_BOOTCOMMAND "run autoboot"
230
231/* Miscellaneous configurable options */
232#define CONFIG_SYS_LONGHELP /* undef to save memory */
233#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
234#define CONFIG_AUTO_COMPLETE 1
Frederik Kriewitzc35d7cf2009-08-23 12:56:42 +0200235#define CONFIG_SYS_PROMPT "OMAP3 DevKit8000 # "
236#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
237/* Print Buffer Size */
238#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
239 sizeof(CONFIG_SYS_PROMPT) + 16)
240#define CONFIG_SYS_MAXARGS 128 /* max number of command args */
241
242/* Boot Argument Buffer Size */
243#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
244
245#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0 + 0x07000000)
246#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
247 0x01000000) /* 16MB */
248
249#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0 + 0x02000000)
250
251/*
252 * OMAP3 has 12 GP timers, they can be driven by the system clock
253 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
254 * This rate is divided by a local divisor.
255 */
256#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
257#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
Frederik Kriewitzc35d7cf2009-08-23 12:56:42 +0200258
Frederik Kriewitzc35d7cf2009-08-23 12:56:42 +0200259/* Physical Memory Map */
260#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
261#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
Frederik Kriewitzc35d7cf2009-08-23 12:56:42 +0200262#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
263
Frederik Kriewitzc35d7cf2009-08-23 12:56:42 +0200264/* NAND and environment organization */
Sandeep Paulraj9c44ddc2009-09-09 11:50:40 -0400265#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
Frederik Kriewitzc35d7cf2009-08-23 12:56:42 +0200266
267#define CONFIG_ENV_IS_IN_NAND 1
268#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
269
Luca Ceresoli6cbec7b2011-04-20 11:02:05 -0400270#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
Frederik Kriewitzc35d7cf2009-08-23 12:56:42 +0200271
Thomas Weber66fca012010-10-18 15:38:15 +0200272#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
Thomas Weber30f305c2010-11-18 08:45:25 +0100273#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
274#define CONFIG_SYS_INIT_RAM_SIZE 0x800
275#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
Wolfgang Denk93e14592013-10-04 17:43:24 +0200276 CONFIG_SYS_INIT_RAM_SIZE - \
277 GENERATED_GBL_DATA_SIZE)
Thomas Weber66fca012010-10-18 15:38:15 +0200278
Simon Schwarz3f6a4922011-09-14 15:32:17 -0400279/* SRAM config */
280#define CONFIG_SYS_SRAM_START 0x40200000
281#define CONFIG_SYS_SRAM_SIZE 0x10000
282
283/* Defines for SPL */
Tom Rini47f7bca2012-08-13 12:03:19 -0700284#define CONFIG_SPL_FRAMEWORK
Simon Schwarz3f6a4922011-09-14 15:32:17 -0400285#define CONFIG_SPL_NAND_SIMPLE
286
287#define CONFIG_SPL_LIBCOMMON_SUPPORT
288#define CONFIG_SPL_LIBDISK_SUPPORT
Tom Riniee08a822011-11-23 05:13:06 +0000289#define CONFIG_SPL_BOARD_INIT
Simon Schwarz3f6a4922011-09-14 15:32:17 -0400290#define CONFIG_SPL_I2C_SUPPORT
291#define CONFIG_SPL_LIBGENERIC_SUPPORT
292#define CONFIG_SPL_SERIAL_SUPPORT
Marek Vasut16e41c82012-07-21 05:02:27 +0000293#define CONFIG_SPL_GPIO_SUPPORT
Simon Schwarz3f6a4922011-09-14 15:32:17 -0400294#define CONFIG_SPL_POWER_SUPPORT
295#define CONFIG_SPL_NAND_SUPPORT
Scott Wood6f2f01b2012-09-20 19:09:07 -0500296#define CONFIG_SPL_NAND_BASE
297#define CONFIG_SPL_NAND_DRIVERS
298#define CONFIG_SPL_NAND_ECC
Simon Schwarz99154712011-09-30 00:41:34 +0000299#define CONFIG_SPL_MMC_SUPPORT
300#define CONFIG_SPL_FAT_SUPPORT
Simon Schwarz3f6a4922011-09-14 15:32:17 -0400301#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
Simon Schwarz99154712011-09-30 00:41:34 +0000302#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
303#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
304#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
Simon Schwarz3f6a4922011-09-14 15:32:17 -0400305
306#define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/
Tom Rinie0820cc2012-05-08 07:29:31 +0000307#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */
Simon Schwarz3f6a4922011-09-14 15:32:17 -0400308#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
309
Simon Schwarz2d52a9a2012-03-15 04:01:40 +0000310#define CONFIG_SPL_BSS_START_ADDR 0x80000500 /* leave space for bootargs*/
Simon Schwarz3f6a4922011-09-14 15:32:17 -0400311#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
312
313/* NAND boot config */
pekon guptab80a6602014-05-06 00:46:19 +0530314#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
Tom Rinic471ccb2011-11-09 16:40:04 -0500315#define CONFIG_SYS_NAND_5_ADDR_CYCLE
Simon Schwarz3f6a4922011-09-14 15:32:17 -0400316#define CONFIG_SYS_NAND_PAGE_COUNT 64
317#define CONFIG_SYS_NAND_PAGE_SIZE 2048
318#define CONFIG_SYS_NAND_OOBSIZE 64
319#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
320#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
321#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\
322 10, 11, 12, 13}
323
324#define CONFIG_SYS_NAND_ECCSIZE 512
325#define CONFIG_SYS_NAND_ECCBYTES 3
pekon gupta3f719062013-11-18 19:03:01 +0530326#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
Simon Schwarz3f6a4922011-09-14 15:32:17 -0400327
Simon Schwarz3f6a4922011-09-14 15:32:17 -0400328#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
329
330#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
331#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x200000
332
Simon Schwarz5183b7e2011-12-05 23:16:28 +0000333#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
Tom Riniba75a812011-10-18 10:47:22 -0700334#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */
335
Simon Schwarzd38bc972012-03-15 04:01:35 +0000336/* SPL OS boot options */
Simon Schwarz2d52a9a2012-03-15 04:01:40 +0000337#define CONFIG_SPL_OS_BOOT
Simon Schwarz2d52a9a2012-03-15 04:01:40 +0000338
Simon Schwarzd38bc972012-03-15 04:01:35 +0000339#define CONFIG_CMD_SPL
340#define CONFIG_CMD_SPL_WRITE_SIZE 0x400 /* 1024 byte */
341#define CONFIG_CMD_SPL_NAND_OFS (CONFIG_SYS_NAND_SPL_KERNEL_OFFS+\
342 0x400000)
343#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
Tom Rinib6144df2013-06-07 14:16:43 -0400344
345#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME "uImage"
346#define CONFIG_SPL_FAT_LOAD_ARGS_NAME "args"
347
348#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x500 /* address 0xa0000 */
349#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x8 /* address 0x1000 */
350#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 8 /* 4KB */
351
Simon Schwarzd38bc972012-03-15 04:01:35 +0000352#define CONFIG_SYS_SPL_ARGS_ADDR (PHYS_SDRAM_1 + 0x100)
353
Frederik Kriewitzc35d7cf2009-08-23 12:56:42 +0200354#endif /* __CONFIG_H */