blob: 1738a2b3096baf7a5bd033b6ff29b92ac26146de [file] [log] [blame]
Bo Shenf7fa2f32012-07-05 17:21:46 +00001/*
2 * Copyright (C) 2012 Atmel Corporation
3 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02004 * SPDX-License-Identifier: GPL-2.0+
Bo Shenf7fa2f32012-07-05 17:21:46 +00005 */
6
7#include <common.h>
8#include <asm/io.h>
9#include <asm/arch/at91sam9x5_matrix.h>
10#include <asm/arch/at91sam9_smc.h>
11#include <asm/arch/at91_common.h>
12#include <asm/arch/at91_pmc.h>
13#include <asm/arch/at91_rstc.h>
14#include <asm/arch/gpio.h>
15#include <asm/arch/clk.h>
16#include <lcd.h>
17#include <atmel_hlcdc.h>
Wu, Josh3a49cd72012-09-13 22:22:05 +000018#include <atmel_mci.h>
Bo Shenf7fa2f32012-07-05 17:21:46 +000019#ifdef CONFIG_MACB
20#include <net.h>
21#endif
22#include <netdev.h>
23#ifdef CONFIG_LCD_INFO
24#include <nand.h>
25#include <version.h>
26#endif
27#ifdef CONFIG_ATMEL_SPI
28#include <spi.h>
29#endif
30
31DECLARE_GLOBAL_DATA_PTR;
32
33/* ------------------------------------------------------------------------- */
34/*
35 * Miscelaneous platform dependent initialisations
36 */
37#ifdef CONFIG_CMD_NAND
38static void at91sam9x5ek_nand_hw_init(void)
39{
40 struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
41 struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
42 struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
43 unsigned long csa;
44
45 /* Enable CS3 */
46 csa = readl(&matrix->ebicsa);
47 csa |= AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA;
Bo Shen4ed9c882012-08-15 18:44:27 +000048 /* NAND flash on D16 */
49 csa |= AT91_MATRIX_NFD0_ON_D16;
Wu, Josh1c5794a2012-09-05 22:14:28 +000050
51 /* Configure IO drive */
52 csa &= ~AT91_MATRIX_EBI_EBI_IOSR_NORMAL;
53
Bo Shenf7fa2f32012-07-05 17:21:46 +000054 writel(csa, &matrix->ebicsa);
55
56 /* Configure SMC CS3 for NAND/SmartMedia */
Wu, Josh2ab4c742012-08-23 00:05:37 +000057 writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
58 AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
Bo Shenf7fa2f32012-07-05 17:21:46 +000059 &smc->cs[3].setup);
Wu, Josh2ab4c742012-08-23 00:05:37 +000060 writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(5) |
61 AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(6),
Bo Shenf7fa2f32012-07-05 17:21:46 +000062 &smc->cs[3].pulse);
Wu, Josh2ab4c742012-08-23 00:05:37 +000063 writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(6),
Bo Shenf7fa2f32012-07-05 17:21:46 +000064 &smc->cs[3].cycle);
65 writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
66 AT91_SMC_MODE_EXNW_DISABLE |
67#ifdef CONFIG_SYS_NAND_DBW_16
68 AT91_SMC_MODE_DBW_16 |
69#else /* CONFIG_SYS_NAND_DBW_8 */
70 AT91_SMC_MODE_DBW_8 |
71#endif
Wu, Josh2ab4c742012-08-23 00:05:37 +000072 AT91_SMC_MODE_TDF_CYCLE(1),
Bo Shenf7fa2f32012-07-05 17:21:46 +000073 &smc->cs[3].mode);
74
75 writel(1 << ATMEL_ID_PIOCD, &pmc->pcer);
76
77 /* Configure RDY/BSY */
78 at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
79 /* Enable NandFlash */
80 at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
81
82 at91_set_a_periph(AT91_PIO_PORTD, 0, 1); /* NAND OE */
83 at91_set_a_periph(AT91_PIO_PORTD, 1, 1); /* NAND WE */
84 at91_set_a_periph(AT91_PIO_PORTD, 2, 1); /* NAND ALE */
85 at91_set_a_periph(AT91_PIO_PORTD, 3, 1); /* NAND CLE */
86 at91_set_a_periph(AT91_PIO_PORTD, 6, 1);
87 at91_set_a_periph(AT91_PIO_PORTD, 7, 1);
88 at91_set_a_periph(AT91_PIO_PORTD, 8, 1);
89 at91_set_a_periph(AT91_PIO_PORTD, 9, 1);
90 at91_set_a_periph(AT91_PIO_PORTD, 10, 1);
91 at91_set_a_periph(AT91_PIO_PORTD, 11, 1);
92 at91_set_a_periph(AT91_PIO_PORTD, 12, 1);
93 at91_set_a_periph(AT91_PIO_PORTD, 13, 1);
94}
95#endif
96
97int board_eth_init(bd_t *bis)
98{
99 int rc = 0;
100
101#ifdef CONFIG_MACB
102 if (has_emac0())
103 rc = macb_eth_initialize(0,
104 (void *)ATMEL_BASE_EMAC0, 0x00);
105 if (has_emac1())
106 rc = macb_eth_initialize(1,
107 (void *)ATMEL_BASE_EMAC1, 0x00);
108#endif
109 return rc;
110}
111
112#ifdef CONFIG_LCD
113vidinfo_t panel_info = {
114 .vl_col = 800,
115 .vl_row = 480,
116 .vl_clk = 24000000,
117 .vl_sync = LCDC_LCDCFG5_HSPOL | LCDC_LCDCFG5_VSPOL,
118 .vl_bpix = LCD_BPP,
119 .vl_tft = 1,
120 .vl_clk_pol = 1,
121 .vl_hsync_len = 128,
122 .vl_left_margin = 64,
123 .vl_right_margin = 64,
124 .vl_vsync_len = 2,
125 .vl_upper_margin = 22,
126 .vl_lower_margin = 21,
127 .mmio = ATMEL_BASE_LCDC,
128};
129
130void lcd_enable(void)
131{
132 if (has_lcdc())
133 at91_set_a_periph(AT91_PIO_PORTC, 29, 1); /* power up */
134}
135
136void lcd_disable(void)
137{
138 if (has_lcdc())
139 at91_set_a_periph(AT91_PIO_PORTC, 29, 0); /* power down */
140}
141
142static void at91sam9x5ek_lcd_hw_init(void)
143{
144 struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
145
146 if (has_lcdc()) {
147 at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDPWM */
148 at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDVSYNC */
149 at91_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDHSYNC */
150 at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDISP */
151 at91_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDEN */
152 at91_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDPCK */
153
154 at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDD0 */
155 at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDD1 */
156 at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDD2 */
157 at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDD3 */
158 at91_set_a_periph(AT91_PIO_PORTC, 4, 0); /* LCDD4 */
159 at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* LCDD5 */
160 at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD6 */
161 at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD7 */
162 at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD8 */
163 at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD9 */
164 at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD10 */
165 at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD11 */
166 at91_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDD12 */
167 at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDD13 */
168 at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD14 */
169 at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD15 */
170 at91_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD16 */
171 at91_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDD17 */
172 at91_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD18 */
173 at91_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD19 */
174 at91_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDD20 */
175 at91_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDD21 */
176 at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD22 */
177 at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD23 */
178
179 writel(1 << ATMEL_ID_LCDC, &pmc->pcer);
180 }
181}
182
183#ifdef CONFIG_LCD_INFO
184void lcd_show_board_info(void)
185{
186 ulong dram_size, nand_size;
187 int i;
188 char temp[32];
189
190 if (has_lcdc()) {
191 lcd_printf("%s\n", U_BOOT_VERSION);
192 lcd_printf("(C) 2012 ATMEL Corp\n");
193 lcd_printf("at91support@atmel.com\n");
194 lcd_printf("%s CPU at %s MHz\n",
195 get_cpu_name(),
196 strmhz(temp, get_cpu_clk_rate()));
197
198 dram_size = 0;
199 for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
200 dram_size += gd->bd->bi_dram[i].size;
201 nand_size = 0;
202 for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
203 nand_size += nand_info[i].size;
204 lcd_printf(" %ld MB SDRAM, %ld MB NAND\n",
205 dram_size >> 20,
206 nand_size >> 20);
207 }
208}
209#endif /* CONFIG_LCD_INFO */
210#endif /* CONFIG_LCD */
211
212/* SPI chip select control */
213#ifdef CONFIG_ATMEL_SPI
214int spi_cs_is_valid(unsigned int bus, unsigned int cs)
215{
216 return bus == 0 && cs < 2;
217}
218
219void spi_cs_activate(struct spi_slave *slave)
220{
221 switch (slave->cs) {
222 case 1:
223 at91_set_pio_output(AT91_PIO_PORTA, 7, 0);
224 break;
225 case 0:
226 default:
227 at91_set_pio_output(AT91_PIO_PORTA, 14, 0);
228 break;
229 }
230}
231
232void spi_cs_deactivate(struct spi_slave *slave)
233{
234 switch (slave->cs) {
235 case 1:
236 at91_set_pio_output(AT91_PIO_PORTA, 7, 1);
237 break;
238 case 0:
239 default:
240 at91_set_pio_output(AT91_PIO_PORTA, 14, 1);
241 break;
242 }
243}
244#endif /* CONFIG_ATMEL_SPI */
245
Wu, Josh3a49cd72012-09-13 22:22:05 +0000246#ifdef CONFIG_GENERIC_ATMEL_MCI
247int board_mmc_init(bd_t *bd)
248{
249 at91_mci_hw_init();
250
251 return atmel_mci_init((void *)ATMEL_BASE_HSMCI0);
252}
253#endif
254
Bo Shenf7fa2f32012-07-05 17:21:46 +0000255int board_early_init_f(void)
256{
257 at91_seriald_hw_init();
258 return 0;
259}
260
261int board_init(void)
262{
263 /* arch number of AT91SAM9X5EK-Board */
264 gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9X5EK;
265
266 /* adress of boot parameters */
267 gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
268
269#ifdef CONFIG_CMD_NAND
270 at91sam9x5ek_nand_hw_init();
271#endif
272
273#ifdef CONFIG_ATMEL_SPI
Bo Shenf7fa2f32012-07-05 17:21:46 +0000274 at91_spi0_hw_init(1 << 4);
275#endif
276
277#ifdef CONFIG_MACB
278 at91_macb_hw_init();
279#endif
280
Richard Genoudbcfc8972012-11-29 23:18:32 +0000281#if defined(CONFIG_USB_OHCI_NEW) || defined(CONFIG_USB_EHCI)
282 at91_uhp_hw_init();
283#endif
Bo Shenf7fa2f32012-07-05 17:21:46 +0000284#ifdef CONFIG_LCD
285 at91sam9x5ek_lcd_hw_init();
286#endif
287 return 0;
288}
289
290int dram_init(void)
291{
292 gd->ram_size = get_ram_size((void *) CONFIG_SYS_SDRAM_BASE,
293 CONFIG_SYS_SDRAM_SIZE);
294 return 0;
295}
Bo Shend85e8912015-03-27 14:23:35 +0800296
297#if defined(CONFIG_SPL_BUILD)
298#include <spl.h>
299#include <nand.h>
300
301void at91_spl_board_init(void)
302{
303#ifdef CONFIG_SYS_USE_MMC
304 at91_mci_hw_init();
305#elif CONFIG_SYS_USE_NANDFLASH
306 at91sam9x5ek_nand_hw_init();
307#elif CONFIG_SYS_USE_SPIFLASH
308 at91_spi0_hw_init(1 << 4);
309#endif
310}
311
312#include <asm/arch/atmel_mpddrc.h>
313static void ddr2_conf(struct atmel_mpddr *ddr2)
314{
315 ddr2->md = (ATMEL_MPDDRC_MD_DBW_16_BITS | ATMEL_MPDDRC_MD_DDR2_SDRAM);
316
317 ddr2->cr = (ATMEL_MPDDRC_CR_NC_COL_10 |
318 ATMEL_MPDDRC_CR_NR_ROW_13 |
319 ATMEL_MPDDRC_CR_CAS_DDR_CAS3 |
320 ATMEL_MPDDRC_CR_NB_8BANKS |
321 ATMEL_MPDDRC_CR_DECOD_INTERLEAVED);
322
323 ddr2->rtr = 0x411;
324
325 ddr2->tpr0 = (6 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET |
326 2 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET |
327 2 << ATMEL_MPDDRC_TPR0_TWR_OFFSET |
328 8 << ATMEL_MPDDRC_TPR0_TRC_OFFSET |
329 2 << ATMEL_MPDDRC_TPR0_TRP_OFFSET |
330 2 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET |
331 2 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET |
332 2 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET);
333
334 ddr2->tpr1 = (2 << ATMEL_MPDDRC_TPR1_TXP_OFFSET |
335 200 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET |
336 19 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET |
337 18 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET);
338
339 ddr2->tpr2 = (7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET |
340 2 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET |
341 3 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET |
342 7 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET |
343 2 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET);
344}
345
346void mem_init(void)
347{
348 struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
349 struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
350 struct atmel_mpddr ddr2;
351 unsigned long csa;
352
353 ddr2_conf(&ddr2);
354
355 /* enable DDR2 clock */
Erik van Luijkc982f6b2015-08-13 15:43:20 +0200356 writel(AT91_PMC_DDR, &pmc->scer);
Bo Shend85e8912015-03-27 14:23:35 +0800357
358 /* Chip select 1 is for DDR2/SDRAM */
359 csa = readl(&matrix->ebicsa);
360 csa |= AT91_MATRIX_EBI_CS1A_SDRAMC;
361 csa &= ~AT91_MATRIX_EBI_DBPU_OFF;
362 csa |= AT91_MATRIX_EBI_DBPD_OFF;
363 csa |= AT91_MATRIX_EBI_EBI_IOSR_NORMAL;
364 writel(csa, &matrix->ebicsa);
365
366 /* DDRAM2 Controller initialize */
Erik van Luijk0c01c3e2015-08-13 15:43:18 +0200367 ddr2_init(ATMEL_BASE_DDRSDRC, ATMEL_BASE_CS1, &ddr2);
Bo Shend85e8912015-03-27 14:23:35 +0800368}
369#endif