blob: eb416b832aad53704e0b2597231eb2627cfdf365 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05302/**
3 * gadget.c - DesignWare USB3 DRD Controller Gadget Framework Link
4 *
Kishon Vijay Abraham I30c31d52015-02-23 18:39:52 +05305 * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05306 *
7 * Authors: Felipe Balbi <balbi@ti.com>,
8 * Sebastian Andrzej Siewior <bigeasy@linutronix.de>
9 *
Kishon Vijay Abraham I30c31d52015-02-23 18:39:52 +053010 * Taken from Linux Kernel v3.19-rc1 (drivers/usb/dwc3/gadget.c) and ported
11 * to uboot.
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +053012 *
Kishon Vijay Abraham I30c31d52015-02-23 18:39:52 +053013 * commit 8e74475b0e : usb: dwc3: gadget: use udc-core's reset notifier
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +053014 */
15
Kishon Vijay Abraham I747a0a52015-02-23 18:39:58 +053016#include <common.h>
Simon Glass1eb69ae2019-11-14 12:57:39 -070017#include <cpu_func.h>
Simon Glassf7ae49f2020-05-10 11:40:05 -060018#include <log.h>
Kishon Vijay Abraham I747a0a52015-02-23 18:39:58 +053019#include <malloc.h>
Sean Andersondf5eabc2020-09-15 10:45:16 -040020#include <dm.h>
Simon Glass336d4612020-02-03 07:36:16 -070021#include <dm/device_compat.h>
Simon Glass61b29b82020-02-03 07:36:15 -070022#include <dm/devres.h>
Masahiro Yamada84b8bf62016-01-24 23:27:48 +090023#include <linux/bug.h>
Simon Glassc05ed002020-05-10 11:40:11 -060024#include <linux/delay.h>
Masahiro Yamada9d86b892020-02-14 16:40:19 +090025#include <linux/dma-mapping.h>
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +053026#include <linux/list.h>
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +053027
28#include <linux/usb/ch9.h>
29#include <linux/usb/gadget.h>
30
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +053031#include "core.h"
32#include "gadget.h"
33#include "io.h"
34
Kishon Vijay Abraham I747a0a52015-02-23 18:39:58 +053035#include "linux-compat.h"
36
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +053037/**
38 * dwc3_gadget_set_test_mode - Enables USB2 Test Modes
39 * @dwc: pointer to our context structure
40 * @mode: the mode to set (J, K SE0 NAK, Force Enable)
41 *
42 * Caller should take care of locking. This function will
43 * return 0 on success or -EINVAL if wrong Test Selector
44 * is passed
45 */
46int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode)
47{
48 u32 reg;
49
50 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
51 reg &= ~DWC3_DCTL_TSTCTRL_MASK;
52
53 switch (mode) {
54 case TEST_J:
55 case TEST_K:
56 case TEST_SE0_NAK:
57 case TEST_PACKET:
58 case TEST_FORCE_EN:
59 reg |= mode << 1;
60 break;
61 default:
62 return -EINVAL;
63 }
64
65 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
66
67 return 0;
68}
69
70/**
71 * dwc3_gadget_get_link_state - Gets current state of USB Link
72 * @dwc: pointer to our context structure
73 *
74 * Caller should take care of locking. This function will
75 * return the link state on success (>= 0) or -ETIMEDOUT.
76 */
77int dwc3_gadget_get_link_state(struct dwc3 *dwc)
78{
79 u32 reg;
80
81 reg = dwc3_readl(dwc->regs, DWC3_DSTS);
82
83 return DWC3_DSTS_USBLNKST(reg);
84}
85
86/**
87 * dwc3_gadget_set_link_state - Sets USB Link to a particular State
88 * @dwc: pointer to our context structure
89 * @state: the state to put link into
90 *
91 * Caller should take care of locking. This function will
92 * return 0 on success or -ETIMEDOUT.
93 */
94int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state)
95{
96 int retries = 10000;
97 u32 reg;
98
99 /*
100 * Wait until device controller is ready. Only applies to 1.94a and
101 * later RTL.
102 */
103 if (dwc->revision >= DWC3_REVISION_194A) {
104 while (--retries) {
105 reg = dwc3_readl(dwc->regs, DWC3_DSTS);
106 if (reg & DWC3_DSTS_DCNRD)
107 udelay(5);
108 else
109 break;
110 }
111
112 if (retries <= 0)
113 return -ETIMEDOUT;
114 }
115
116 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
117 reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK;
118
119 /* set requested state */
120 reg |= DWC3_DCTL_ULSTCHNGREQ(state);
121 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
122
123 /*
124 * The following code is racy when called from dwc3_gadget_wakeup,
125 * and is not needed, at least on newer versions
126 */
127 if (dwc->revision >= DWC3_REVISION_194A)
128 return 0;
129
130 /* wait for a change in DSTS */
131 retries = 10000;
132 while (--retries) {
133 reg = dwc3_readl(dwc->regs, DWC3_DSTS);
134
135 if (DWC3_DSTS_USBLNKST(reg) == state)
136 return 0;
137
138 udelay(5);
139 }
140
141 dev_vdbg(dwc->dev, "link state change request timed out\n");
142
143 return -ETIMEDOUT;
144}
145
146/**
147 * dwc3_gadget_resize_tx_fifos - reallocate fifo spaces for current use-case
148 * @dwc: pointer to our context structure
149 *
150 * This function will a best effort FIFO allocation in order
151 * to improve FIFO usage and throughput, while still allowing
152 * us to enable as many endpoints as possible.
153 *
154 * Keep in mind that this operation will be highly dependent
155 * on the configured size for RAM1 - which contains TxFifo -,
156 * the amount of endpoints enabled on coreConsultant tool, and
157 * the width of the Master Bus.
158 *
159 * In the ideal world, we would always be able to satisfy the
160 * following equation:
161 *
162 * ((512 + 2 * MDWIDTH-Bytes) + (Number of IN Endpoints - 1) * \
163 * (3 * (1024 + MDWIDTH-Bytes) + MDWIDTH-Bytes)) / MDWIDTH-Bytes
164 *
165 * Unfortunately, due to many variables that's not always the case.
166 */
167int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc)
168{
169 int last_fifo_depth = 0;
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +0530170 int fifo_size;
171 int mdwidth;
172 int num;
173
174 if (!dwc->needs_fifo_resize)
175 return 0;
176
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +0530177 mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0);
178
179 /* MDWIDTH is represented in bits, we need it in bytes */
180 mdwidth >>= 3;
181
182 /*
183 * FIXME For now we will only allocate 1 wMaxPacketSize space
184 * for each enabled endpoint, later patches will come to
185 * improve this algorithm so that we better use the internal
186 * FIFO space
187 */
188 for (num = 0; num < dwc->num_in_eps; num++) {
189 /* bit0 indicates direction; 1 means IN ep */
190 struct dwc3_ep *dep = dwc->eps[(num << 1) | 1];
191 int mult = 1;
192 int tmp;
193
194 if (!(dep->flags & DWC3_EP_ENABLED))
195 continue;
196
197 if (usb_endpoint_xfer_bulk(dep->endpoint.desc)
198 || usb_endpoint_xfer_isoc(dep->endpoint.desc))
199 mult = 3;
200
201 /*
202 * REVISIT: the following assumes we will always have enough
203 * space available on the FIFO RAM for all possible use cases.
204 * Make sure that's true somehow and change FIFO allocation
205 * accordingly.
206 *
207 * If we have Bulk or Isochronous endpoints, we want
208 * them to be able to be very, very fast. So we're giving
209 * those endpoints a fifo_size which is enough for 3 full
210 * packets
211 */
212 tmp = mult * (dep->endpoint.maxpacket + mdwidth);
213 tmp += mdwidth;
214
215 fifo_size = DIV_ROUND_UP(tmp, mdwidth);
216
217 fifo_size |= (last_fifo_depth << 16);
218
219 dev_vdbg(dwc->dev, "%s: Fifo Addr %04x Size %d\n",
220 dep->name, last_fifo_depth, fifo_size & 0xffff);
221
222 dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(num), fifo_size);
223
224 last_fifo_depth += (fifo_size & 0xffff);
225 }
226
227 return 0;
228}
229
230void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
231 int status)
232{
233 struct dwc3 *dwc = dep->dwc;
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +0530234
235 if (req->queued) {
Kishon Vijay Abraham I747a0a52015-02-23 18:39:58 +0530236 dep->busy_slot++;
237 /*
238 * Skip LINK TRB. We can't use req->trb and check for
239 * DWC3_TRBCTL_LINK_TRB because it points the TRB we
240 * just completed (not the LINK TRB).
241 */
242 if (((dep->busy_slot & DWC3_TRB_MASK) ==
243 DWC3_TRB_NUM- 1) &&
244 usb_endpoint_xfer_isoc(dep->endpoint.desc))
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +0530245 dep->busy_slot++;
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +0530246 req->queued = false;
247 }
Kishon Vijay Abraham I747a0a52015-02-23 18:39:58 +0530248
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +0530249 list_del(&req->list);
250 req->trb = NULL;
Marek Szyprowskifd15b582019-10-02 14:19:14 +0200251 if (req->request.length)
252 dwc3_flush_cache((uintptr_t)req->request.dma, req->request.length);
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +0530253
254 if (req->request.status == -EINPROGRESS)
255 req->request.status = status;
256
257 if (dwc->ep0_bounced && dep->number == 0)
258 dwc->ep0_bounced = false;
259 else
260 usb_gadget_unmap_request(&dwc->gadget, &req->request,
261 req->direction);
262
263 dev_dbg(dwc->dev, "request %p from %s completed %d/%d ===> %d\n",
264 req, dep->name, req->request.actual,
265 req->request.length, status);
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +0530266
267 spin_unlock(&dwc->lock);
268 usb_gadget_giveback_request(&dep->endpoint, &req->request);
269 spin_lock(&dwc->lock);
270}
271
272int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned cmd, u32 param)
273{
274 u32 timeout = 500;
275 u32 reg;
276
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +0530277 dwc3_writel(dwc->regs, DWC3_DGCMDPAR, param);
278 dwc3_writel(dwc->regs, DWC3_DGCMD, cmd | DWC3_DGCMD_CMDACT);
279
280 do {
281 reg = dwc3_readl(dwc->regs, DWC3_DGCMD);
282 if (!(reg & DWC3_DGCMD_CMDACT)) {
283 dev_vdbg(dwc->dev, "Command Complete --> %d\n",
284 DWC3_DGCMD_STATUS(reg));
285 return 0;
286 }
287
288 /*
289 * We can't sleep here, because it's also called from
290 * interrupt context.
291 */
292 timeout--;
293 if (!timeout)
294 return -ETIMEDOUT;
295 udelay(1);
296 } while (1);
297}
298
299int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
300 unsigned cmd, struct dwc3_gadget_ep_cmd_params *params)
301{
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +0530302 u32 timeout = 500;
303 u32 reg;
304
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +0530305 dwc3_writel(dwc->regs, DWC3_DEPCMDPAR0(ep), params->param0);
306 dwc3_writel(dwc->regs, DWC3_DEPCMDPAR1(ep), params->param1);
307 dwc3_writel(dwc->regs, DWC3_DEPCMDPAR2(ep), params->param2);
308
309 dwc3_writel(dwc->regs, DWC3_DEPCMD(ep), cmd | DWC3_DEPCMD_CMDACT);
310 do {
311 reg = dwc3_readl(dwc->regs, DWC3_DEPCMD(ep));
312 if (!(reg & DWC3_DEPCMD_CMDACT)) {
313 dev_vdbg(dwc->dev, "Command Complete --> %d\n",
314 DWC3_DEPCMD_STATUS(reg));
315 return 0;
316 }
317
318 /*
319 * We can't sleep here, because it is also called from
320 * interrupt context.
321 */
322 timeout--;
323 if (!timeout)
324 return -ETIMEDOUT;
325
326 udelay(1);
327 } while (1);
328}
329
330static dma_addr_t dwc3_trb_dma_offset(struct dwc3_ep *dep,
331 struct dwc3_trb *trb)
332{
333 u32 offset = (char *) trb - (char *) dep->trb_pool;
334
335 return dep->trb_pool_dma + offset;
336}
337
338static int dwc3_alloc_trb_pool(struct dwc3_ep *dep)
339{
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +0530340 if (dep->trb_pool)
341 return 0;
342
343 if (dep->number == 0 || dep->number == 1)
344 return 0;
345
Kishon Vijay Abraham I747a0a52015-02-23 18:39:58 +0530346 dep->trb_pool = dma_alloc_coherent(sizeof(struct dwc3_trb) *
347 DWC3_TRB_NUM,
348 (unsigned long *)&dep->trb_pool_dma);
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +0530349 if (!dep->trb_pool) {
350 dev_err(dep->dwc->dev, "failed to allocate trb pool for %s\n",
351 dep->name);
352 return -ENOMEM;
353 }
354
355 return 0;
356}
357
358static void dwc3_free_trb_pool(struct dwc3_ep *dep)
359{
Kishon Vijay Abraham I747a0a52015-02-23 18:39:58 +0530360 dma_free_coherent(dep->trb_pool);
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +0530361
362 dep->trb_pool = NULL;
363 dep->trb_pool_dma = 0;
364}
365
366static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep)
367{
368 struct dwc3_gadget_ep_cmd_params params;
369 u32 cmd;
370
371 memset(&params, 0x00, sizeof(params));
372
373 if (dep->number != 1) {
374 cmd = DWC3_DEPCMD_DEPSTARTCFG;
375 /* XferRscIdx == 0 for ep0 and 2 for the remaining */
376 if (dep->number > 1) {
377 if (dwc->start_config_issued)
378 return 0;
379 dwc->start_config_issued = true;
380 cmd |= DWC3_DEPCMD_PARAM(2);
381 }
382
383 return dwc3_send_gadget_ep_cmd(dwc, 0, cmd, &params);
384 }
385
386 return 0;
387}
388
389static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep,
390 const struct usb_endpoint_descriptor *desc,
391 const struct usb_ss_ep_comp_descriptor *comp_desc,
392 bool ignore, bool restore)
393{
394 struct dwc3_gadget_ep_cmd_params params;
395
396 memset(&params, 0x00, sizeof(params));
397
398 params.param0 = DWC3_DEPCFG_EP_TYPE(usb_endpoint_type(desc))
399 | DWC3_DEPCFG_MAX_PACKET_SIZE(usb_endpoint_maxp(desc));
400
401 /* Burst size is only needed in SuperSpeed mode */
402 if (dwc->gadget.speed == USB_SPEED_SUPER) {
403 u32 burst = dep->endpoint.maxburst - 1;
404
405 params.param0 |= DWC3_DEPCFG_BURST_SIZE(burst);
406 }
407
408 if (ignore)
409 params.param0 |= DWC3_DEPCFG_IGN_SEQ_NUM;
410
411 if (restore) {
412 params.param0 |= DWC3_DEPCFG_ACTION_RESTORE;
413 params.param2 |= dep->saved_state;
414 }
415
416 params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN
417 | DWC3_DEPCFG_XFER_NOT_READY_EN;
418
419 if (usb_ss_max_streams(comp_desc) && usb_endpoint_xfer_bulk(desc)) {
420 params.param1 |= DWC3_DEPCFG_STREAM_CAPABLE
421 | DWC3_DEPCFG_STREAM_EVENT_EN;
422 dep->stream_capable = true;
423 }
424
425 if (!usb_endpoint_xfer_control(desc))
426 params.param1 |= DWC3_DEPCFG_XFER_IN_PROGRESS_EN;
427
428 /*
429 * We are doing 1:1 mapping for endpoints, meaning
430 * Physical Endpoints 2 maps to Logical Endpoint 2 and
431 * so on. We consider the direction bit as part of the physical
432 * endpoint number. So USB endpoint 0x81 is 0x03.
433 */
434 params.param1 |= DWC3_DEPCFG_EP_NUMBER(dep->number);
435
436 /*
437 * We must use the lower 16 TX FIFOs even though
438 * HW might have more
439 */
440 if (dep->direction)
441 params.param0 |= DWC3_DEPCFG_FIFO_NUMBER(dep->number >> 1);
442
443 if (desc->bInterval) {
444 params.param1 |= DWC3_DEPCFG_BINTERVAL_M1(desc->bInterval - 1);
445 dep->interval = 1 << (desc->bInterval - 1);
446 }
447
448 return dwc3_send_gadget_ep_cmd(dwc, dep->number,
449 DWC3_DEPCMD_SETEPCONFIG, &params);
450}
451
452static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep)
453{
454 struct dwc3_gadget_ep_cmd_params params;
455
456 memset(&params, 0x00, sizeof(params));
457
458 params.param0 = DWC3_DEPXFERCFG_NUM_XFER_RES(1);
459
460 return dwc3_send_gadget_ep_cmd(dwc, dep->number,
461 DWC3_DEPCMD_SETTRANSFRESOURCE, &params);
462}
463
464/**
465 * __dwc3_gadget_ep_enable - Initializes a HW endpoint
466 * @dep: endpoint to be initialized
467 * @desc: USB Endpoint Descriptor
468 *
469 * Caller should take care of locking
470 */
471static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
472 const struct usb_endpoint_descriptor *desc,
473 const struct usb_ss_ep_comp_descriptor *comp_desc,
474 bool ignore, bool restore)
475{
476 struct dwc3 *dwc = dep->dwc;
477 u32 reg;
478 int ret;
479
480 dev_vdbg(dwc->dev, "Enabling %s\n", dep->name);
481
482 if (!(dep->flags & DWC3_EP_ENABLED)) {
483 ret = dwc3_gadget_start_config(dwc, dep);
484 if (ret)
485 return ret;
486 }
487
488 ret = dwc3_gadget_set_ep_config(dwc, dep, desc, comp_desc, ignore,
489 restore);
490 if (ret)
491 return ret;
492
493 if (!(dep->flags & DWC3_EP_ENABLED)) {
494 struct dwc3_trb *trb_st_hw;
495 struct dwc3_trb *trb_link;
496
497 ret = dwc3_gadget_set_xfer_resource(dwc, dep);
498 if (ret)
499 return ret;
500
501 dep->endpoint.desc = desc;
502 dep->comp_desc = comp_desc;
503 dep->type = usb_endpoint_type(desc);
504 dep->flags |= DWC3_EP_ENABLED;
505
506 reg = dwc3_readl(dwc->regs, DWC3_DALEPENA);
507 reg |= DWC3_DALEPENA_EP(dep->number);
508 dwc3_writel(dwc->regs, DWC3_DALEPENA, reg);
509
510 if (!usb_endpoint_xfer_isoc(desc))
511 return 0;
512
513 /* Link TRB for ISOC. The HWO bit is never reset */
514 trb_st_hw = &dep->trb_pool[0];
515
516 trb_link = &dep->trb_pool[DWC3_TRB_NUM - 1];
517 memset(trb_link, 0, sizeof(*trb_link));
518
519 trb_link->bpl = lower_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw));
520 trb_link->bph = upper_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw));
521 trb_link->ctrl |= DWC3_TRBCTL_LINK_TRB;
522 trb_link->ctrl |= DWC3_TRB_CTRL_HWO;
523 }
524
525 return 0;
526}
527
528static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum, bool force);
529static void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep)
530{
531 struct dwc3_request *req;
532
533 if (!list_empty(&dep->req_queued)) {
534 dwc3_stop_active_transfer(dwc, dep->number, true);
535
536 /* - giveback all requests to gadget driver */
537 while (!list_empty(&dep->req_queued)) {
538 req = next_request(&dep->req_queued);
539
540 dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
541 }
542 }
543
544 while (!list_empty(&dep->request_list)) {
545 req = next_request(&dep->request_list);
546
547 dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
548 }
549}
550
551/**
552 * __dwc3_gadget_ep_disable - Disables a HW endpoint
553 * @dep: the endpoint to disable
554 *
555 * This function also removes requests which are currently processed ny the
556 * hardware and those which are not yet scheduled.
557 * Caller should take care of locking.
558 */
559static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
560{
561 struct dwc3 *dwc = dep->dwc;
562 u32 reg;
563
564 dwc3_remove_requests(dwc, dep);
565
566 /* make sure HW endpoint isn't stalled */
567 if (dep->flags & DWC3_EP_STALL)
568 __dwc3_gadget_ep_set_halt(dep, 0, false);
569
570 reg = dwc3_readl(dwc->regs, DWC3_DALEPENA);
571 reg &= ~DWC3_DALEPENA_EP(dep->number);
572 dwc3_writel(dwc->regs, DWC3_DALEPENA, reg);
573
574 dep->stream_capable = false;
575 dep->endpoint.desc = NULL;
576 dep->comp_desc = NULL;
577 dep->type = 0;
578 dep->flags = 0;
579
580 return 0;
581}
582
583/* -------------------------------------------------------------------------- */
584
585static int dwc3_gadget_ep0_enable(struct usb_ep *ep,
586 const struct usb_endpoint_descriptor *desc)
587{
588 return -EINVAL;
589}
590
591static int dwc3_gadget_ep0_disable(struct usb_ep *ep)
592{
593 return -EINVAL;
594}
595
596/* -------------------------------------------------------------------------- */
597
598static int dwc3_gadget_ep_enable(struct usb_ep *ep,
599 const struct usb_endpoint_descriptor *desc)
600{
601 struct dwc3_ep *dep;
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +0530602 unsigned long flags;
603 int ret;
604
605 if (!ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) {
606 pr_debug("dwc3: invalid parameters\n");
607 return -EINVAL;
608 }
609
610 if (!desc->wMaxPacketSize) {
611 pr_debug("dwc3: missing wMaxPacketSize\n");
612 return -EINVAL;
613 }
614
615 dep = to_dwc3_ep(ep);
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +0530616
617 if (dep->flags & DWC3_EP_ENABLED) {
Kishon Vijay Abraham I747a0a52015-02-23 18:39:58 +0530618 WARN(true, "%s is already enabled\n",
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +0530619 dep->name);
620 return 0;
621 }
622
623 switch (usb_endpoint_type(desc)) {
624 case USB_ENDPOINT_XFER_CONTROL:
625 strlcat(dep->name, "-control", sizeof(dep->name));
626 break;
627 case USB_ENDPOINT_XFER_ISOC:
628 strlcat(dep->name, "-isoc", sizeof(dep->name));
629 break;
630 case USB_ENDPOINT_XFER_BULK:
631 strlcat(dep->name, "-bulk", sizeof(dep->name));
632 break;
633 case USB_ENDPOINT_XFER_INT:
634 strlcat(dep->name, "-int", sizeof(dep->name));
635 break;
636 default:
Sean Andersondf5eabc2020-09-15 10:45:16 -0400637 dev_err(dep->dwc->dev, "invalid endpoint transfer type\n");
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +0530638 }
639
640 spin_lock_irqsave(&dwc->lock, flags);
641 ret = __dwc3_gadget_ep_enable(dep, desc, ep->comp_desc, false, false);
642 spin_unlock_irqrestore(&dwc->lock, flags);
643
644 return ret;
645}
646
647static int dwc3_gadget_ep_disable(struct usb_ep *ep)
648{
649 struct dwc3_ep *dep;
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +0530650 unsigned long flags;
651 int ret;
652
653 if (!ep) {
654 pr_debug("dwc3: invalid parameters\n");
655 return -EINVAL;
656 }
657
658 dep = to_dwc3_ep(ep);
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +0530659
660 if (!(dep->flags & DWC3_EP_ENABLED)) {
Kishon Vijay Abraham I747a0a52015-02-23 18:39:58 +0530661 WARN(true, "%s is already disabled\n",
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +0530662 dep->name);
663 return 0;
664 }
665
666 snprintf(dep->name, sizeof(dep->name), "ep%d%s",
667 dep->number >> 1,
668 (dep->number & 1) ? "in" : "out");
669
670 spin_lock_irqsave(&dwc->lock, flags);
671 ret = __dwc3_gadget_ep_disable(dep);
672 spin_unlock_irqrestore(&dwc->lock, flags);
673
674 return ret;
675}
676
677static struct usb_request *dwc3_gadget_ep_alloc_request(struct usb_ep *ep,
678 gfp_t gfp_flags)
679{
680 struct dwc3_request *req;
681 struct dwc3_ep *dep = to_dwc3_ep(ep);
682
683 req = kzalloc(sizeof(*req), gfp_flags);
684 if (!req)
685 return NULL;
686
687 req->epnum = dep->number;
688 req->dep = dep;
689
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +0530690 return &req->request;
691}
692
693static void dwc3_gadget_ep_free_request(struct usb_ep *ep,
694 struct usb_request *request)
695{
696 struct dwc3_request *req = to_dwc3_request(request);
697
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +0530698 kfree(req);
699}
700
701/**
702 * dwc3_prepare_one_trb - setup one TRB from one request
703 * @dep: endpoint for which this request is prepared
704 * @req: dwc3_request pointer
705 */
706static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
707 struct dwc3_request *req, dma_addr_t dma,
708 unsigned length, unsigned last, unsigned chain, unsigned node)
709{
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +0530710 struct dwc3_trb *trb;
711
Sean Andersondf5eabc2020-09-15 10:45:16 -0400712 dev_vdbg(dep->dwc->dev, "%s: req %p dma %08llx length %d%s%s\n",
713 dep->name, req, (unsigned long long)dma,
714 length, last ? " last" : "", chain ? " chain" : "");
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +0530715
716
717 trb = &dep->trb_pool[dep->free_slot & DWC3_TRB_MASK];
718
719 if (!req->trb) {
720 dwc3_gadget_move_request_queued(req);
721 req->trb = trb;
722 req->trb_dma = dwc3_trb_dma_offset(dep, trb);
723 req->start_slot = dep->free_slot & DWC3_TRB_MASK;
724 }
725
726 dep->free_slot++;
727 /* Skip the LINK-TRB on ISOC */
728 if (((dep->free_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM - 1) &&
729 usb_endpoint_xfer_isoc(dep->endpoint.desc))
730 dep->free_slot++;
731
732 trb->size = DWC3_TRB_SIZE_LENGTH(length);
733 trb->bpl = lower_32_bits(dma);
734 trb->bph = upper_32_bits(dma);
735
736 switch (usb_endpoint_type(dep->endpoint.desc)) {
737 case USB_ENDPOINT_XFER_CONTROL:
738 trb->ctrl = DWC3_TRBCTL_CONTROL_SETUP;
739 break;
740
741 case USB_ENDPOINT_XFER_ISOC:
742 if (!node)
743 trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS_FIRST;
744 else
745 trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS;
746 break;
747
748 case USB_ENDPOINT_XFER_BULK:
749 case USB_ENDPOINT_XFER_INT:
750 trb->ctrl = DWC3_TRBCTL_NORMAL;
751 break;
752 default:
753 /*
754 * This is only possible with faulty memory because we
755 * checked it already :)
756 */
757 BUG();
758 }
759
760 if (!req->request.no_interrupt && !chain)
761 trb->ctrl |= DWC3_TRB_CTRL_IOC;
762
763 if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
764 trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI;
765 trb->ctrl |= DWC3_TRB_CTRL_CSP;
766 } else if (last) {
767 trb->ctrl |= DWC3_TRB_CTRL_LST;
768 }
769
770 if (chain)
771 trb->ctrl |= DWC3_TRB_CTRL_CHN;
772
773 if (usb_endpoint_xfer_bulk(dep->endpoint.desc) && dep->stream_capable)
774 trb->ctrl |= DWC3_TRB_CTRL_SID_SOFN(req->request.stream_id);
775
776 trb->ctrl |= DWC3_TRB_CTRL_HWO;
Kishon Vijay Abraham I526a50f2015-02-23 18:40:13 +0530777
Philipp Tomsichb7bf4a92017-04-06 16:58:52 +0200778 dwc3_flush_cache((uintptr_t)dma, length);
779 dwc3_flush_cache((uintptr_t)trb, sizeof(*trb));
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +0530780}
781
782/*
783 * dwc3_prepare_trbs - setup TRBs from requests
784 * @dep: endpoint for which requests are being prepared
785 * @starting: true if the endpoint is idle and no requests are queued.
786 *
787 * The function goes through the requests list and sets up TRBs for the
788 * transfers. The function returns once there are no more TRBs available or
789 * it runs out of requests.
790 */
791static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting)
792{
793 struct dwc3_request *req, *n;
794 u32 trbs_left;
795 u32 max;
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +0530796
797 BUILD_BUG_ON_NOT_POWER_OF_2(DWC3_TRB_NUM);
798
799 /* the first request must not be queued */
800 trbs_left = (dep->busy_slot - dep->free_slot) & DWC3_TRB_MASK;
801
802 /* Can't wrap around on a non-isoc EP since there's no link TRB */
803 if (!usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
804 max = DWC3_TRB_NUM - (dep->free_slot & DWC3_TRB_MASK);
805 if (trbs_left > max)
806 trbs_left = max;
807 }
808
809 /*
810 * If busy & slot are equal than it is either full or empty. If we are
811 * starting to process requests then we are empty. Otherwise we are
812 * full and don't do anything
813 */
814 if (!trbs_left) {
815 if (!starting)
816 return;
817 trbs_left = DWC3_TRB_NUM;
818 /*
819 * In case we start from scratch, we queue the ISOC requests
820 * starting from slot 1. This is done because we use ring
821 * buffer and have no LST bit to stop us. Instead, we place
822 * IOC bit every TRB_NUM/4. We try to avoid having an interrupt
823 * after the first request so we start at slot 1 and have
824 * 7 requests proceed before we hit the first IOC.
825 * Other transfer types don't use the ring buffer and are
826 * processed from the first TRB until the last one. Since we
827 * don't wrap around we have to start at the beginning.
828 */
829 if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
830 dep->busy_slot = 1;
831 dep->free_slot = 1;
832 } else {
833 dep->busy_slot = 0;
834 dep->free_slot = 0;
835 }
836 }
837
838 /* The last TRB is a link TRB, not used for xfer */
839 if ((trbs_left <= 1) && usb_endpoint_xfer_isoc(dep->endpoint.desc))
840 return;
841
842 list_for_each_entry_safe(req, n, &dep->request_list, list) {
843 unsigned length;
844 dma_addr_t dma;
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +0530845
Kishon Vijay Abraham I747a0a52015-02-23 18:39:58 +0530846 dma = req->request.dma;
847 length = req->request.length;
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +0530848
Kishon Vijay Abraham I747a0a52015-02-23 18:39:58 +0530849 dwc3_prepare_one_trb(dep, req, dma, length,
Lukasz Majewski29e7fc12015-03-03 17:32:13 +0100850 true, false, 0);
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +0530851
Lukasz Majewski29e7fc12015-03-03 17:32:13 +0100852 break;
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +0530853 }
854}
855
856static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param,
857 int start_new)
858{
859 struct dwc3_gadget_ep_cmd_params params;
860 struct dwc3_request *req;
861 struct dwc3 *dwc = dep->dwc;
862 int ret;
863 u32 cmd;
864
865 if (start_new && (dep->flags & DWC3_EP_BUSY)) {
866 dev_vdbg(dwc->dev, "%s: endpoint busy\n", dep->name);
867 return -EBUSY;
868 }
869 dep->flags &= ~DWC3_EP_PENDING_REQUEST;
870
871 /*
872 * If we are getting here after a short-out-packet we don't enqueue any
873 * new requests as we try to set the IOC bit only on the last request.
874 */
875 if (start_new) {
876 if (list_empty(&dep->req_queued))
877 dwc3_prepare_trbs(dep, start_new);
878
879 /* req points to the first request which will be sent */
880 req = next_request(&dep->req_queued);
881 } else {
882 dwc3_prepare_trbs(dep, start_new);
883
884 /*
885 * req points to the first request where HWO changed from 0 to 1
886 */
887 req = next_request(&dep->req_queued);
888 }
889 if (!req) {
890 dep->flags |= DWC3_EP_PENDING_REQUEST;
891 return 0;
892 }
893
894 memset(&params, 0, sizeof(params));
895
896 if (start_new) {
897 params.param0 = upper_32_bits(req->trb_dma);
898 params.param1 = lower_32_bits(req->trb_dma);
899 cmd = DWC3_DEPCMD_STARTTRANSFER;
900 } else {
901 cmd = DWC3_DEPCMD_UPDATETRANSFER;
902 }
903
904 cmd |= DWC3_DEPCMD_PARAM(cmd_param);
905 ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, &params);
906 if (ret < 0) {
907 dev_dbg(dwc->dev, "failed to send STARTTRANSFER command\n");
908
909 /*
910 * FIXME we need to iterate over the list of requests
911 * here and stop, unmap, free and del each of the linked
912 * requests instead of what we do now.
913 */
914 usb_gadget_unmap_request(&dwc->gadget, &req->request,
915 req->direction);
916 list_del(&req->list);
917 return ret;
918 }
919
920 dep->flags |= DWC3_EP_BUSY;
921
922 if (start_new) {
923 dep->resource_index = dwc3_gadget_ep_get_transfer_index(dwc,
924 dep->number);
925 WARN_ON_ONCE(!dep->resource_index);
926 }
927
928 return 0;
929}
930
931static void __dwc3_gadget_start_isoc(struct dwc3 *dwc,
932 struct dwc3_ep *dep, u32 cur_uf)
933{
934 u32 uf;
935
936 if (list_empty(&dep->request_list)) {
937 dev_vdbg(dwc->dev, "ISOC ep %s run out for requests.\n",
938 dep->name);
939 dep->flags |= DWC3_EP_PENDING_REQUEST;
940 return;
941 }
942
943 /* 4 micro frames in the future */
944 uf = cur_uf + dep->interval * 4;
945
946 __dwc3_gadget_kick_transfer(dep, uf, 1);
947}
948
949static void dwc3_gadget_start_isoc(struct dwc3 *dwc,
950 struct dwc3_ep *dep, const struct dwc3_event_depevt *event)
951{
952 u32 cur_uf, mask;
953
954 mask = ~(dep->interval - 1);
955 cur_uf = event->parameters & mask;
956
957 __dwc3_gadget_start_isoc(dwc, dep, cur_uf);
958}
959
960static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
961{
962 struct dwc3 *dwc = dep->dwc;
963 int ret;
964
965 req->request.actual = 0;
966 req->request.status = -EINPROGRESS;
967 req->direction = dep->direction;
968 req->epnum = dep->number;
969
970 /*
Marek Szyprowski5dc45382015-03-03 17:32:10 +0100971 * DWC3 hangs on OUT requests smaller than maxpacket size,
972 * so HACK the request length
973 */
974 if (dep->direction == 0 &&
975 req->request.length < dep->endpoint.maxpacket)
976 req->request.length = dep->endpoint.maxpacket;
977
978 /*
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +0530979 * We only add to our list of requests now and
980 * start consuming the list once we get XferNotReady
981 * IRQ.
982 *
983 * That way, we avoid doing anything that we don't need
984 * to do now and defer it until the point we receive a
985 * particular token from the Host side.
986 *
987 * This will also avoid Host cancelling URBs due to too
988 * many NAKs.
989 */
990 ret = usb_gadget_map_request(&dwc->gadget, &req->request,
991 dep->direction);
992 if (ret)
993 return ret;
994
995 list_add_tail(&req->list, &dep->request_list);
996
997 /*
998 * There are a few special cases:
999 *
1000 * 1. XferNotReady with empty list of requests. We need to kick the
1001 * transfer here in that situation, otherwise we will be NAKing
1002 * forever. If we get XferNotReady before gadget driver has a
1003 * chance to queue a request, we will ACK the IRQ but won't be
1004 * able to receive the data until the next request is queued.
1005 * The following code is handling exactly that.
1006 *
1007 */
1008 if (dep->flags & DWC3_EP_PENDING_REQUEST) {
1009 /*
1010 * If xfernotready is already elapsed and it is a case
1011 * of isoc transfer, then issue END TRANSFER, so that
1012 * you can receive xfernotready again and can have
1013 * notion of current microframe.
1014 */
1015 if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
1016 if (list_empty(&dep->req_queued)) {
1017 dwc3_stop_active_transfer(dwc, dep->number, true);
1018 dep->flags = DWC3_EP_ENABLED;
1019 }
1020 return 0;
1021 }
1022
1023 ret = __dwc3_gadget_kick_transfer(dep, 0, true);
1024 if (ret && ret != -EBUSY)
1025 dev_dbg(dwc->dev, "%s: failed to kick transfers\n",
1026 dep->name);
1027 return ret;
1028 }
1029
1030 /*
1031 * 2. XferInProgress on Isoc EP with an active transfer. We need to
1032 * kick the transfer here after queuing a request, otherwise the
1033 * core may not see the modified TRB(s).
1034 */
1035 if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
1036 (dep->flags & DWC3_EP_BUSY) &&
1037 !(dep->flags & DWC3_EP_MISSED_ISOC)) {
1038 WARN_ON_ONCE(!dep->resource_index);
1039 ret = __dwc3_gadget_kick_transfer(dep, dep->resource_index,
1040 false);
1041 if (ret && ret != -EBUSY)
1042 dev_dbg(dwc->dev, "%s: failed to kick transfers\n",
1043 dep->name);
1044 return ret;
1045 }
1046
1047 /*
1048 * 4. Stream Capable Bulk Endpoints. We need to start the transfer
1049 * right away, otherwise host will not know we have streams to be
1050 * handled.
1051 */
1052 if (dep->stream_capable) {
1053 int ret;
1054
1055 ret = __dwc3_gadget_kick_transfer(dep, 0, true);
1056 if (ret && ret != -EBUSY) {
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05301057 dev_dbg(dwc->dev, "%s: failed to kick transfers\n",
1058 dep->name);
1059 }
1060 }
1061
1062 return 0;
1063}
1064
1065static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request,
1066 gfp_t gfp_flags)
1067{
1068 struct dwc3_request *req = to_dwc3_request(request);
1069 struct dwc3_ep *dep = to_dwc3_ep(ep);
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05301070
1071 unsigned long flags;
1072
1073 int ret;
1074
1075 spin_lock_irqsave(&dwc->lock, flags);
1076 if (!dep->endpoint.desc) {
Sean Andersondf5eabc2020-09-15 10:45:16 -04001077 dev_dbg(dep->dwc->dev,
1078 "trying to queue request %p to disabled %s\n", request,
1079 ep->name);
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05301080 ret = -ESHUTDOWN;
1081 goto out;
1082 }
1083
Kishon Vijay Abraham I747a0a52015-02-23 18:39:58 +05301084 if (req->dep != dep) {
Sean Andersondf5eabc2020-09-15 10:45:16 -04001085 WARN(true, "request %p belongs to '%s'\n", request,
1086 req->dep->name);
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05301087 ret = -EINVAL;
1088 goto out;
1089 }
1090
Sean Andersondf5eabc2020-09-15 10:45:16 -04001091 dev_vdbg(dep->dwc->dev, "queing request %p to %s length %d\n",
1092 request, ep->name, request->length);
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05301093
1094 ret = __dwc3_gadget_ep_queue(dep, req);
1095
1096out:
1097 spin_unlock_irqrestore(&dwc->lock, flags);
1098
1099 return ret;
1100}
1101
1102static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
1103 struct usb_request *request)
1104{
1105 struct dwc3_request *req = to_dwc3_request(request);
1106 struct dwc3_request *r = NULL;
1107
1108 struct dwc3_ep *dep = to_dwc3_ep(ep);
1109 struct dwc3 *dwc = dep->dwc;
1110
1111 unsigned long flags;
1112 int ret = 0;
1113
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05301114 spin_lock_irqsave(&dwc->lock, flags);
1115
1116 list_for_each_entry(r, &dep->request_list, list) {
1117 if (r == req)
1118 break;
1119 }
1120
1121 if (r != req) {
1122 list_for_each_entry(r, &dep->req_queued, list) {
1123 if (r == req)
1124 break;
1125 }
1126 if (r == req) {
1127 /* wait until it is processed */
1128 dwc3_stop_active_transfer(dwc, dep->number, true);
1129 goto out1;
1130 }
1131 dev_err(dwc->dev, "request %p was not queued to %s\n",
1132 request, ep->name);
1133 ret = -EINVAL;
1134 goto out0;
1135 }
1136
1137out1:
1138 /* giveback the request */
1139 dwc3_gadget_giveback(dep, req, -ECONNRESET);
1140
1141out0:
1142 spin_unlock_irqrestore(&dwc->lock, flags);
1143
1144 return ret;
1145}
1146
1147int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol)
1148{
1149 struct dwc3_gadget_ep_cmd_params params;
1150 struct dwc3 *dwc = dep->dwc;
1151 int ret;
1152
1153 if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
1154 dev_err(dwc->dev, "%s is of Isochronous type\n", dep->name);
1155 return -EINVAL;
1156 }
1157
1158 memset(&params, 0x00, sizeof(params));
1159
1160 if (value) {
1161 if (!protocol && ((dep->direction && dep->flags & DWC3_EP_BUSY) ||
1162 (!list_empty(&dep->req_queued) ||
1163 !list_empty(&dep->request_list)))) {
1164 dev_dbg(dwc->dev, "%s: pending request, cannot halt\n",
1165 dep->name);
1166 return -EAGAIN;
1167 }
1168
1169 ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
1170 DWC3_DEPCMD_SETSTALL, &params);
1171 if (ret)
1172 dev_err(dwc->dev, "failed to set STALL on %s\n",
1173 dep->name);
1174 else
1175 dep->flags |= DWC3_EP_STALL;
1176 } else {
1177 ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
1178 DWC3_DEPCMD_CLEARSTALL, &params);
1179 if (ret)
1180 dev_err(dwc->dev, "failed to clear STALL on %s\n",
1181 dep->name);
1182 else
1183 dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE);
1184 }
1185
1186 return ret;
1187}
1188
1189static int dwc3_gadget_ep_set_halt(struct usb_ep *ep, int value)
1190{
1191 struct dwc3_ep *dep = to_dwc3_ep(ep);
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05301192
1193 unsigned long flags;
1194
1195 int ret;
1196
1197 spin_lock_irqsave(&dwc->lock, flags);
1198 ret = __dwc3_gadget_ep_set_halt(dep, value, false);
1199 spin_unlock_irqrestore(&dwc->lock, flags);
1200
1201 return ret;
1202}
1203
1204static int dwc3_gadget_ep_set_wedge(struct usb_ep *ep)
1205{
1206 struct dwc3_ep *dep = to_dwc3_ep(ep);
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05301207 unsigned long flags;
1208 int ret;
1209
1210 spin_lock_irqsave(&dwc->lock, flags);
1211 dep->flags |= DWC3_EP_WEDGE;
1212
1213 if (dep->number == 0 || dep->number == 1)
1214 ret = __dwc3_gadget_ep0_set_halt(ep, 1);
1215 else
1216 ret = __dwc3_gadget_ep_set_halt(dep, 1, false);
1217 spin_unlock_irqrestore(&dwc->lock, flags);
1218
1219 return ret;
1220}
1221
1222/* -------------------------------------------------------------------------- */
1223
1224static struct usb_endpoint_descriptor dwc3_gadget_ep0_desc = {
1225 .bLength = USB_DT_ENDPOINT_SIZE,
1226 .bDescriptorType = USB_DT_ENDPOINT,
1227 .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
1228};
1229
1230static const struct usb_ep_ops dwc3_gadget_ep0_ops = {
1231 .enable = dwc3_gadget_ep0_enable,
1232 .disable = dwc3_gadget_ep0_disable,
1233 .alloc_request = dwc3_gadget_ep_alloc_request,
1234 .free_request = dwc3_gadget_ep_free_request,
1235 .queue = dwc3_gadget_ep0_queue,
1236 .dequeue = dwc3_gadget_ep_dequeue,
1237 .set_halt = dwc3_gadget_ep0_set_halt,
1238 .set_wedge = dwc3_gadget_ep_set_wedge,
1239};
1240
1241static const struct usb_ep_ops dwc3_gadget_ep_ops = {
1242 .enable = dwc3_gadget_ep_enable,
1243 .disable = dwc3_gadget_ep_disable,
1244 .alloc_request = dwc3_gadget_ep_alloc_request,
1245 .free_request = dwc3_gadget_ep_free_request,
1246 .queue = dwc3_gadget_ep_queue,
1247 .dequeue = dwc3_gadget_ep_dequeue,
1248 .set_halt = dwc3_gadget_ep_set_halt,
1249 .set_wedge = dwc3_gadget_ep_set_wedge,
1250};
1251
1252/* -------------------------------------------------------------------------- */
1253
1254static int dwc3_gadget_get_frame(struct usb_gadget *g)
1255{
1256 struct dwc3 *dwc = gadget_to_dwc(g);
1257 u32 reg;
1258
1259 reg = dwc3_readl(dwc->regs, DWC3_DSTS);
1260 return DWC3_DSTS_SOFFN(reg);
1261}
1262
1263static int dwc3_gadget_wakeup(struct usb_gadget *g)
1264{
1265 struct dwc3 *dwc = gadget_to_dwc(g);
1266
1267 unsigned long timeout;
1268 unsigned long flags;
1269
1270 u32 reg;
1271
1272 int ret = 0;
1273
1274 u8 link_state;
1275 u8 speed;
1276
1277 spin_lock_irqsave(&dwc->lock, flags);
1278
1279 /*
1280 * According to the Databook Remote wakeup request should
1281 * be issued only when the device is in early suspend state.
1282 *
1283 * We can check that via USB Link State bits in DSTS register.
1284 */
1285 reg = dwc3_readl(dwc->regs, DWC3_DSTS);
1286
1287 speed = reg & DWC3_DSTS_CONNECTSPD;
1288 if (speed == DWC3_DSTS_SUPERSPEED) {
1289 dev_dbg(dwc->dev, "no wakeup on SuperSpeed\n");
1290 ret = -EINVAL;
1291 goto out;
1292 }
1293
1294 link_state = DWC3_DSTS_USBLNKST(reg);
1295
1296 switch (link_state) {
1297 case DWC3_LINK_STATE_RX_DET: /* in HS, means Early Suspend */
1298 case DWC3_LINK_STATE_U3: /* in HS, means SUSPEND */
1299 break;
1300 default:
1301 dev_dbg(dwc->dev, "can't wakeup from link state %d\n",
1302 link_state);
1303 ret = -EINVAL;
1304 goto out;
1305 }
1306
1307 ret = dwc3_gadget_set_link_state(dwc, DWC3_LINK_STATE_RECOV);
1308 if (ret < 0) {
1309 dev_err(dwc->dev, "failed to put link in Recovery\n");
1310 goto out;
1311 }
1312
1313 /* Recent versions do this automatically */
1314 if (dwc->revision < DWC3_REVISION_194A) {
1315 /* write zeroes to Link Change Request */
1316 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
1317 reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK;
1318 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
1319 }
1320
1321 /* poll until Link State changes to ON */
Kishon Vijay Abraham I747a0a52015-02-23 18:39:58 +05301322 timeout = 1000;
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05301323
Kishon Vijay Abraham I747a0a52015-02-23 18:39:58 +05301324 while (timeout--) {
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05301325 reg = dwc3_readl(dwc->regs, DWC3_DSTS);
1326
1327 /* in HS, means ON */
1328 if (DWC3_DSTS_USBLNKST(reg) == DWC3_LINK_STATE_U0)
1329 break;
1330 }
1331
1332 if (DWC3_DSTS_USBLNKST(reg) != DWC3_LINK_STATE_U0) {
1333 dev_err(dwc->dev, "failed to send remote wakeup\n");
1334 ret = -EINVAL;
1335 }
1336
1337out:
1338 spin_unlock_irqrestore(&dwc->lock, flags);
1339
1340 return ret;
1341}
1342
1343static int dwc3_gadget_set_selfpowered(struct usb_gadget *g,
1344 int is_selfpowered)
1345{
1346 struct dwc3 *dwc = gadget_to_dwc(g);
1347 unsigned long flags;
1348
1349 spin_lock_irqsave(&dwc->lock, flags);
1350 dwc->is_selfpowered = !!is_selfpowered;
1351 spin_unlock_irqrestore(&dwc->lock, flags);
1352
1353 return 0;
1354}
1355
1356static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend)
1357{
1358 u32 reg;
1359 u32 timeout = 500;
1360
1361 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
1362 if (is_on) {
1363 if (dwc->revision <= DWC3_REVISION_187A) {
1364 reg &= ~DWC3_DCTL_TRGTULST_MASK;
1365 reg |= DWC3_DCTL_TRGTULST_RX_DET;
1366 }
1367
1368 if (dwc->revision >= DWC3_REVISION_194A)
1369 reg &= ~DWC3_DCTL_KEEP_CONNECT;
1370 reg |= DWC3_DCTL_RUN_STOP;
1371
1372 if (dwc->has_hibernation)
1373 reg |= DWC3_DCTL_KEEP_CONNECT;
1374
1375 dwc->pullups_connected = true;
1376 } else {
1377 reg &= ~DWC3_DCTL_RUN_STOP;
1378
1379 if (dwc->has_hibernation && !suspend)
1380 reg &= ~DWC3_DCTL_KEEP_CONNECT;
1381
1382 dwc->pullups_connected = false;
1383 }
1384
1385 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
1386
1387 do {
1388 reg = dwc3_readl(dwc->regs, DWC3_DSTS);
1389 if (is_on) {
1390 if (!(reg & DWC3_DSTS_DEVCTRLHLT))
1391 break;
1392 } else {
1393 if (reg & DWC3_DSTS_DEVCTRLHLT)
1394 break;
1395 }
1396 timeout--;
1397 if (!timeout)
1398 return -ETIMEDOUT;
1399 udelay(1);
1400 } while (1);
1401
1402 dev_vdbg(dwc->dev, "gadget %s data soft-%s\n",
1403 dwc->gadget_driver
1404 ? dwc->gadget_driver->function : "no-function",
1405 is_on ? "connect" : "disconnect");
1406
1407 return 0;
1408}
1409
1410static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
1411{
1412 struct dwc3 *dwc = gadget_to_dwc(g);
1413 unsigned long flags;
1414 int ret;
1415
1416 is_on = !!is_on;
1417
1418 spin_lock_irqsave(&dwc->lock, flags);
1419 ret = dwc3_gadget_run_stop(dwc, is_on, false);
1420 spin_unlock_irqrestore(&dwc->lock, flags);
1421
1422 return ret;
1423}
1424
1425static void dwc3_gadget_enable_irq(struct dwc3 *dwc)
1426{
1427 u32 reg;
1428
1429 /* Enable all but Start and End of Frame IRQs */
1430 reg = (DWC3_DEVTEN_VNDRDEVTSTRCVEDEN |
1431 DWC3_DEVTEN_EVNTOVERFLOWEN |
1432 DWC3_DEVTEN_CMDCMPLTEN |
1433 DWC3_DEVTEN_ERRTICERREN |
1434 DWC3_DEVTEN_WKUPEVTEN |
1435 DWC3_DEVTEN_ULSTCNGEN |
1436 DWC3_DEVTEN_CONNECTDONEEN |
1437 DWC3_DEVTEN_USBRSTEN |
1438 DWC3_DEVTEN_DISCONNEVTEN);
1439
1440 dwc3_writel(dwc->regs, DWC3_DEVTEN, reg);
1441}
1442
1443static void dwc3_gadget_disable_irq(struct dwc3 *dwc)
1444{
1445 /* mask all interrupts */
1446 dwc3_writel(dwc->regs, DWC3_DEVTEN, 0x00);
1447}
1448
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05301449static int dwc3_gadget_start(struct usb_gadget *g,
1450 struct usb_gadget_driver *driver)
1451{
1452 struct dwc3 *dwc = gadget_to_dwc(g);
1453 struct dwc3_ep *dep;
1454 unsigned long flags;
1455 int ret = 0;
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05301456 u32 reg;
1457
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05301458 spin_lock_irqsave(&dwc->lock, flags);
1459
1460 if (dwc->gadget_driver) {
1461 dev_err(dwc->dev, "%s is already bound to %s\n",
1462 dwc->gadget.name,
Kishon Vijay Abraham I747a0a52015-02-23 18:39:58 +05301463 dwc->gadget_driver->function);
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05301464 ret = -EBUSY;
1465 goto err1;
1466 }
1467
1468 dwc->gadget_driver = driver;
1469
1470 reg = dwc3_readl(dwc->regs, DWC3_DCFG);
1471 reg &= ~(DWC3_DCFG_SPEED_MASK);
1472
1473 /**
1474 * WORKAROUND: DWC3 revision < 2.20a have an issue
1475 * which would cause metastability state on Run/Stop
1476 * bit if we try to force the IP to USB2-only mode.
1477 *
1478 * Because of that, we cannot configure the IP to any
1479 * speed other than the SuperSpeed
1480 *
1481 * Refers to:
1482 *
1483 * STAR#9000525659: Clock Domain Crossing on DCTL in
1484 * USB 2.0 Mode
1485 */
1486 if (dwc->revision < DWC3_REVISION_220A) {
1487 reg |= DWC3_DCFG_SUPERSPEED;
1488 } else {
1489 switch (dwc->maximum_speed) {
1490 case USB_SPEED_LOW:
1491 reg |= DWC3_DSTS_LOWSPEED;
1492 break;
1493 case USB_SPEED_FULL:
1494 reg |= DWC3_DSTS_FULLSPEED1;
1495 break;
1496 case USB_SPEED_HIGH:
1497 reg |= DWC3_DSTS_HIGHSPEED;
1498 break;
1499 case USB_SPEED_SUPER: /* FALLTHROUGH */
1500 case USB_SPEED_UNKNOWN: /* FALTHROUGH */
1501 default:
1502 reg |= DWC3_DSTS_SUPERSPEED;
1503 }
1504 }
1505 dwc3_writel(dwc->regs, DWC3_DCFG, reg);
1506
1507 dwc->start_config_issued = false;
1508
1509 /* Start with SuperSpeed Default */
1510 dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
1511
1512 dep = dwc->eps[0];
1513 ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false,
1514 false);
1515 if (ret) {
1516 dev_err(dwc->dev, "failed to enable %s\n", dep->name);
1517 goto err2;
1518 }
1519
1520 dep = dwc->eps[1];
1521 ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false,
1522 false);
1523 if (ret) {
1524 dev_err(dwc->dev, "failed to enable %s\n", dep->name);
1525 goto err3;
1526 }
1527
1528 /* begin to receive SETUP packets */
1529 dwc->ep0state = EP0_SETUP_PHASE;
1530 dwc3_ep0_out_start(dwc);
1531
1532 dwc3_gadget_enable_irq(dwc);
1533
1534 spin_unlock_irqrestore(&dwc->lock, flags);
1535
1536 return 0;
1537
1538err3:
1539 __dwc3_gadget_ep_disable(dwc->eps[0]);
1540
1541err2:
1542 dwc->gadget_driver = NULL;
1543
1544err1:
1545 spin_unlock_irqrestore(&dwc->lock, flags);
1546
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05301547 return ret;
1548}
1549
1550static int dwc3_gadget_stop(struct usb_gadget *g)
1551{
1552 struct dwc3 *dwc = gadget_to_dwc(g);
1553 unsigned long flags;
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05301554
1555 spin_lock_irqsave(&dwc->lock, flags);
1556
1557 dwc3_gadget_disable_irq(dwc);
1558 __dwc3_gadget_ep_disable(dwc->eps[0]);
1559 __dwc3_gadget_ep_disable(dwc->eps[1]);
1560
1561 dwc->gadget_driver = NULL;
1562
1563 spin_unlock_irqrestore(&dwc->lock, flags);
1564
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05301565 return 0;
1566}
1567
1568static const struct usb_gadget_ops dwc3_gadget_ops = {
1569 .get_frame = dwc3_gadget_get_frame,
1570 .wakeup = dwc3_gadget_wakeup,
1571 .set_selfpowered = dwc3_gadget_set_selfpowered,
1572 .pullup = dwc3_gadget_pullup,
1573 .udc_start = dwc3_gadget_start,
1574 .udc_stop = dwc3_gadget_stop,
1575};
1576
1577/* -------------------------------------------------------------------------- */
1578
1579static int dwc3_gadget_init_hw_endpoints(struct dwc3 *dwc,
1580 u8 num, u32 direction)
1581{
1582 struct dwc3_ep *dep;
1583 u8 i;
1584
1585 for (i = 0; i < num; i++) {
1586 u8 epnum = (i << 1) | (!!direction);
1587
1588 dep = kzalloc(sizeof(*dep), GFP_KERNEL);
1589 if (!dep)
1590 return -ENOMEM;
1591
1592 dep->dwc = dwc;
1593 dep->number = epnum;
1594 dep->direction = !!direction;
1595 dwc->eps[epnum] = dep;
1596
1597 snprintf(dep->name, sizeof(dep->name), "ep%d%s", epnum >> 1,
1598 (epnum & 1) ? "in" : "out");
1599
1600 dep->endpoint.name = dep->name;
1601
1602 dev_vdbg(dwc->dev, "initializing %s\n", dep->name);
1603
1604 if (epnum == 0 || epnum == 1) {
1605 usb_ep_set_maxpacket_limit(&dep->endpoint, 512);
1606 dep->endpoint.maxburst = 1;
1607 dep->endpoint.ops = &dwc3_gadget_ep0_ops;
1608 if (!epnum)
1609 dwc->gadget.ep0 = &dep->endpoint;
1610 } else {
1611 int ret;
1612
Lukasz Majewskiafa093b2015-03-03 17:32:14 +01001613 usb_ep_set_maxpacket_limit(&dep->endpoint, 512);
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05301614 dep->endpoint.max_streams = 15;
1615 dep->endpoint.ops = &dwc3_gadget_ep_ops;
1616 list_add_tail(&dep->endpoint.ep_list,
1617 &dwc->gadget.ep_list);
1618
1619 ret = dwc3_alloc_trb_pool(dep);
1620 if (ret)
1621 return ret;
1622 }
1623
1624 INIT_LIST_HEAD(&dep->request_list);
1625 INIT_LIST_HEAD(&dep->req_queued);
1626 }
1627
1628 return 0;
1629}
1630
1631static int dwc3_gadget_init_endpoints(struct dwc3 *dwc)
1632{
1633 int ret;
1634
1635 INIT_LIST_HEAD(&dwc->gadget.ep_list);
1636
1637 ret = dwc3_gadget_init_hw_endpoints(dwc, dwc->num_out_eps, 0);
1638 if (ret < 0) {
1639 dev_vdbg(dwc->dev, "failed to allocate OUT endpoints\n");
1640 return ret;
1641 }
1642
1643 ret = dwc3_gadget_init_hw_endpoints(dwc, dwc->num_in_eps, 1);
1644 if (ret < 0) {
1645 dev_vdbg(dwc->dev, "failed to allocate IN endpoints\n");
1646 return ret;
1647 }
1648
1649 return 0;
1650}
1651
1652static void dwc3_gadget_free_endpoints(struct dwc3 *dwc)
1653{
1654 struct dwc3_ep *dep;
1655 u8 epnum;
1656
1657 for (epnum = 0; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
1658 dep = dwc->eps[epnum];
1659 if (!dep)
1660 continue;
1661 /*
1662 * Physical endpoints 0 and 1 are special; they form the
1663 * bi-directional USB endpoint 0.
1664 *
1665 * For those two physical endpoints, we don't allocate a TRB
1666 * pool nor do we add them the endpoints list. Due to that, we
1667 * shouldn't do these two operations otherwise we would end up
1668 * with all sorts of bugs when removing dwc3.ko.
1669 */
1670 if (epnum != 0 && epnum != 1) {
1671 dwc3_free_trb_pool(dep);
1672 list_del(&dep->endpoint.ep_list);
1673 }
1674
1675 kfree(dep);
1676 }
1677}
1678
1679/* -------------------------------------------------------------------------- */
1680
1681static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep,
1682 struct dwc3_request *req, struct dwc3_trb *trb,
1683 const struct dwc3_event_depevt *event, int status)
1684{
1685 unsigned int count;
1686 unsigned int s_pkt = 0;
1687 unsigned int trb_status;
1688
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05301689 if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN)
1690 /*
1691 * We continue despite the error. There is not much we
1692 * can do. If we don't clean it up we loop forever. If
1693 * we skip the TRB then it gets overwritten after a
1694 * while since we use them in a ring buffer. A BUG()
1695 * would help. Lets hope that if this occurs, someone
1696 * fixes the root cause instead of looking away :)
1697 */
1698 dev_err(dwc->dev, "%s's TRB (%p) still owned by HW\n",
1699 dep->name, trb);
1700 count = trb->size & DWC3_TRB_SIZE_MASK;
1701
1702 if (dep->direction) {
1703 if (count) {
1704 trb_status = DWC3_TRB_SIZE_TRBSTS(trb->size);
1705 if (trb_status == DWC3_TRBSTS_MISSED_ISOC) {
1706 dev_dbg(dwc->dev, "incomplete IN transfer %s\n",
1707 dep->name);
1708 /*
1709 * If missed isoc occurred and there is
1710 * no request queued then issue END
1711 * TRANSFER, so that core generates
1712 * next xfernotready and we will issue
1713 * a fresh START TRANSFER.
1714 * If there are still queued request
1715 * then wait, do not issue either END
1716 * or UPDATE TRANSFER, just attach next
1717 * request in request_list during
1718 * giveback.If any future queued request
1719 * is successfully transferred then we
1720 * will issue UPDATE TRANSFER for all
1721 * request in the request_list.
1722 */
1723 dep->flags |= DWC3_EP_MISSED_ISOC;
1724 } else {
1725 dev_err(dwc->dev, "incomplete IN transfer %s\n",
1726 dep->name);
1727 status = -ECONNRESET;
1728 }
1729 } else {
1730 dep->flags &= ~DWC3_EP_MISSED_ISOC;
1731 }
1732 } else {
1733 if (count && (event->status & DEPEVT_STATUS_SHORT))
1734 s_pkt = 1;
1735 }
1736
1737 /*
1738 * We assume here we will always receive the entire data block
1739 * which we should receive. Meaning, if we program RX to
1740 * receive 4K but we receive only 2K, we assume that's all we
1741 * should receive and we simply bounce the request back to the
1742 * gadget driver for further processing.
1743 */
1744 req->request.actual += req->request.length - count;
1745 if (s_pkt)
1746 return 1;
1747 if ((event->status & DEPEVT_STATUS_LST) &&
1748 (trb->ctrl & (DWC3_TRB_CTRL_LST |
1749 DWC3_TRB_CTRL_HWO)))
1750 return 1;
1751 if ((event->status & DEPEVT_STATUS_IOC) &&
1752 (trb->ctrl & DWC3_TRB_CTRL_IOC))
1753 return 1;
1754 return 0;
1755}
1756
1757static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
1758 const struct dwc3_event_depevt *event, int status)
1759{
1760 struct dwc3_request *req;
1761 struct dwc3_trb *trb;
1762 unsigned int slot;
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05301763
Lukasz Majewski3621b3b2015-03-03 17:32:15 +01001764 req = next_request(&dep->req_queued);
1765 if (!req) {
1766 WARN_ON_ONCE(1);
1767 return 1;
1768 }
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05301769
Lukasz Majewski3621b3b2015-03-03 17:32:15 +01001770 slot = req->start_slot;
1771 if ((slot == DWC3_TRB_NUM - 1) &&
1772 usb_endpoint_xfer_isoc(dep->endpoint.desc))
1773 slot++;
1774 slot %= DWC3_TRB_NUM;
1775 trb = &dep->trb_pool[slot];
Kishon Vijay Abraham I747a0a52015-02-23 18:39:58 +05301776
Philipp Tomsichb7bf4a92017-04-06 16:58:52 +02001777 dwc3_flush_cache((uintptr_t)trb, sizeof(*trb));
Lukasz Majewski3621b3b2015-03-03 17:32:15 +01001778 __dwc3_cleanup_done_trbs(dwc, dep, req, trb, event, status);
1779 dwc3_gadget_giveback(dep, req, status);
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05301780
1781 if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
1782 list_empty(&dep->req_queued)) {
1783 if (list_empty(&dep->request_list)) {
1784 /*
1785 * If there is no entry in request list then do
1786 * not issue END TRANSFER now. Just set PENDING
1787 * flag, so that END TRANSFER is issued when an
1788 * entry is added into request list.
1789 */
1790 dep->flags = DWC3_EP_PENDING_REQUEST;
1791 } else {
1792 dwc3_stop_active_transfer(dwc, dep->number, true);
1793 dep->flags = DWC3_EP_ENABLED;
1794 }
1795 return 1;
1796 }
1797
1798 return 1;
1799}
1800
1801static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc,
1802 struct dwc3_ep *dep, const struct dwc3_event_depevt *event)
1803{
1804 unsigned status = 0;
1805 int clean_busy;
1806
1807 if (event->status & DEPEVT_STATUS_BUSERR)
1808 status = -ECONNRESET;
1809
1810 clean_busy = dwc3_cleanup_done_reqs(dwc, dep, event, status);
1811 if (clean_busy)
1812 dep->flags &= ~DWC3_EP_BUSY;
1813
1814 /*
1815 * WORKAROUND: This is the 2nd half of U1/U2 -> U0 workaround.
1816 * See dwc3_gadget_linksts_change_interrupt() for 1st half.
1817 */
1818 if (dwc->revision < DWC3_REVISION_183A) {
1819 u32 reg;
1820 int i;
1821
1822 for (i = 0; i < DWC3_ENDPOINTS_NUM; i++) {
1823 dep = dwc->eps[i];
1824
1825 if (!(dep->flags & DWC3_EP_ENABLED))
1826 continue;
1827
1828 if (!list_empty(&dep->req_queued))
1829 return;
1830 }
1831
1832 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
1833 reg |= dwc->u1u2;
1834 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
1835
1836 dwc->u1u2 = 0;
1837 }
1838}
1839
1840static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
1841 const struct dwc3_event_depevt *event)
1842{
1843 struct dwc3_ep *dep;
1844 u8 epnum = event->endpoint_number;
1845
1846 dep = dwc->eps[epnum];
1847
1848 if (!(dep->flags & DWC3_EP_ENABLED))
1849 return;
1850
1851 if (epnum == 0 || epnum == 1) {
1852 dwc3_ep0_interrupt(dwc, event);
1853 return;
1854 }
1855
1856 switch (event->endpoint_event) {
1857 case DWC3_DEPEVT_XFERCOMPLETE:
1858 dep->resource_index = 0;
1859
1860 if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
1861 dev_dbg(dwc->dev, "%s is an Isochronous endpoint\n",
1862 dep->name);
1863 return;
1864 }
1865
1866 dwc3_endpoint_transfer_complete(dwc, dep, event);
1867 break;
1868 case DWC3_DEPEVT_XFERINPROGRESS:
1869 dwc3_endpoint_transfer_complete(dwc, dep, event);
1870 break;
1871 case DWC3_DEPEVT_XFERNOTREADY:
1872 if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
1873 dwc3_gadget_start_isoc(dwc, dep, event);
1874 } else {
1875 int ret;
1876
1877 dev_vdbg(dwc->dev, "%s: reason %s\n",
1878 dep->name, event->status &
1879 DEPEVT_STATUS_TRANSFER_ACTIVE
1880 ? "Transfer Active"
1881 : "Transfer Not Active");
1882
1883 ret = __dwc3_gadget_kick_transfer(dep, 0, 1);
1884 if (!ret || ret == -EBUSY)
1885 return;
1886
1887 dev_dbg(dwc->dev, "%s: failed to kick transfers\n",
1888 dep->name);
1889 }
1890
1891 break;
1892 case DWC3_DEPEVT_STREAMEVT:
1893 if (!usb_endpoint_xfer_bulk(dep->endpoint.desc)) {
1894 dev_err(dwc->dev, "Stream event for non-Bulk %s\n",
1895 dep->name);
1896 return;
1897 }
1898
1899 switch (event->status) {
1900 case DEPEVT_STREAMEVT_FOUND:
1901 dev_vdbg(dwc->dev, "Stream %d found and started\n",
1902 event->parameters);
1903
1904 break;
1905 case DEPEVT_STREAMEVT_NOTFOUND:
1906 /* FALLTHROUGH */
1907 default:
1908 dev_dbg(dwc->dev, "Couldn't find suitable stream\n");
1909 }
1910 break;
1911 case DWC3_DEPEVT_RXTXFIFOEVT:
1912 dev_dbg(dwc->dev, "%s FIFO Overrun\n", dep->name);
1913 break;
1914 case DWC3_DEPEVT_EPCMDCMPLT:
1915 dev_vdbg(dwc->dev, "Endpoint Command Complete\n");
1916 break;
1917 }
1918}
1919
1920static void dwc3_disconnect_gadget(struct dwc3 *dwc)
1921{
1922 if (dwc->gadget_driver && dwc->gadget_driver->disconnect) {
1923 spin_unlock(&dwc->lock);
1924 dwc->gadget_driver->disconnect(&dwc->gadget);
1925 spin_lock(&dwc->lock);
1926 }
1927}
1928
1929static void dwc3_suspend_gadget(struct dwc3 *dwc)
1930{
1931 if (dwc->gadget_driver && dwc->gadget_driver->suspend) {
1932 spin_unlock(&dwc->lock);
1933 dwc->gadget_driver->suspend(&dwc->gadget);
1934 spin_lock(&dwc->lock);
1935 }
1936}
1937
1938static void dwc3_resume_gadget(struct dwc3 *dwc)
1939{
1940 if (dwc->gadget_driver && dwc->gadget_driver->resume) {
1941 spin_unlock(&dwc->lock);
1942 dwc->gadget_driver->resume(&dwc->gadget);
1943 }
1944}
1945
1946static void dwc3_reset_gadget(struct dwc3 *dwc)
1947{
1948 if (!dwc->gadget_driver)
1949 return;
1950
1951 if (dwc->gadget.speed != USB_SPEED_UNKNOWN) {
1952 spin_unlock(&dwc->lock);
1953 usb_gadget_udc_reset(&dwc->gadget, dwc->gadget_driver);
1954 spin_lock(&dwc->lock);
1955 }
1956}
1957
1958static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum, bool force)
1959{
1960 struct dwc3_ep *dep;
1961 struct dwc3_gadget_ep_cmd_params params;
1962 u32 cmd;
1963 int ret;
1964
1965 dep = dwc->eps[epnum];
1966
1967 if (!dep->resource_index)
1968 return;
1969
1970 /*
1971 * NOTICE: We are violating what the Databook says about the
1972 * EndTransfer command. Ideally we would _always_ wait for the
1973 * EndTransfer Command Completion IRQ, but that's causing too
1974 * much trouble synchronizing between us and gadget driver.
1975 *
1976 * We have discussed this with the IP Provider and it was
1977 * suggested to giveback all requests here, but give HW some
1978 * extra time to synchronize with the interconnect. We're using
1979 * an arbitraty 100us delay for that.
1980 *
1981 * Note also that a similar handling was tested by Synopsys
1982 * (thanks a lot Paul) and nothing bad has come out of it.
1983 * In short, what we're doing is:
1984 *
1985 * - Issue EndTransfer WITH CMDIOC bit set
1986 * - Wait 100us
1987 */
1988
1989 cmd = DWC3_DEPCMD_ENDTRANSFER;
1990 cmd |= force ? DWC3_DEPCMD_HIPRI_FORCERM : 0;
1991 cmd |= DWC3_DEPCMD_CMDIOC;
1992 cmd |= DWC3_DEPCMD_PARAM(dep->resource_index);
1993 memset(&params, 0, sizeof(params));
1994 ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, &params);
1995 WARN_ON_ONCE(ret);
1996 dep->resource_index = 0;
1997 dep->flags &= ~DWC3_EP_BUSY;
1998 udelay(100);
1999}
2000
2001static void dwc3_stop_active_transfers(struct dwc3 *dwc)
2002{
2003 u32 epnum;
2004
2005 for (epnum = 2; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
2006 struct dwc3_ep *dep;
2007
2008 dep = dwc->eps[epnum];
2009 if (!dep)
2010 continue;
2011
2012 if (!(dep->flags & DWC3_EP_ENABLED))
2013 continue;
2014
2015 dwc3_remove_requests(dwc, dep);
2016 }
2017}
2018
2019static void dwc3_clear_stall_all_ep(struct dwc3 *dwc)
2020{
2021 u32 epnum;
2022
2023 for (epnum = 1; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
2024 struct dwc3_ep *dep;
2025 struct dwc3_gadget_ep_cmd_params params;
2026 int ret;
2027
2028 dep = dwc->eps[epnum];
2029 if (!dep)
2030 continue;
2031
2032 if (!(dep->flags & DWC3_EP_STALL))
2033 continue;
2034
2035 dep->flags &= ~DWC3_EP_STALL;
2036
2037 memset(&params, 0, sizeof(params));
2038 ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
2039 DWC3_DEPCMD_CLEARSTALL, &params);
2040 WARN_ON_ONCE(ret);
2041 }
2042}
2043
2044static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
2045{
2046 int reg;
2047
2048 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
2049 reg &= ~DWC3_DCTL_INITU1ENA;
2050 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
2051
2052 reg &= ~DWC3_DCTL_INITU2ENA;
2053 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
2054
2055 dwc3_disconnect_gadget(dwc);
2056 dwc->start_config_issued = false;
2057
2058 dwc->gadget.speed = USB_SPEED_UNKNOWN;
2059 dwc->setup_packet_pending = false;
2060 usb_gadget_set_state(&dwc->gadget, USB_STATE_NOTATTACHED);
2061}
2062
2063static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
2064{
2065 u32 reg;
2066
2067 /*
2068 * WORKAROUND: DWC3 revisions <1.88a have an issue which
2069 * would cause a missing Disconnect Event if there's a
2070 * pending Setup Packet in the FIFO.
2071 *
2072 * There's no suggested workaround on the official Bug
2073 * report, which states that "unless the driver/application
2074 * is doing any special handling of a disconnect event,
2075 * there is no functional issue".
2076 *
2077 * Unfortunately, it turns out that we _do_ some special
2078 * handling of a disconnect event, namely complete all
2079 * pending transfers, notify gadget driver of the
2080 * disconnection, and so on.
2081 *
2082 * Our suggested workaround is to follow the Disconnect
2083 * Event steps here, instead, based on a setup_packet_pending
2084 * flag. Such flag gets set whenever we have a XferNotReady
2085 * event on EP0 and gets cleared on XferComplete for the
2086 * same endpoint.
2087 *
2088 * Refers to:
2089 *
2090 * STAR#9000466709: RTL: Device : Disconnect event not
2091 * generated if setup packet pending in FIFO
2092 */
2093 if (dwc->revision < DWC3_REVISION_188A) {
2094 if (dwc->setup_packet_pending)
2095 dwc3_gadget_disconnect_interrupt(dwc);
2096 }
2097
2098 dwc3_reset_gadget(dwc);
2099
2100 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
2101 reg &= ~DWC3_DCTL_TSTCTRL_MASK;
2102 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
2103 dwc->test_mode = false;
2104
2105 dwc3_stop_active_transfers(dwc);
2106 dwc3_clear_stall_all_ep(dwc);
2107 dwc->start_config_issued = false;
2108
2109 /* Reset device address to zero */
2110 reg = dwc3_readl(dwc->regs, DWC3_DCFG);
2111 reg &= ~(DWC3_DCFG_DEVADDR_MASK);
2112 dwc3_writel(dwc->regs, DWC3_DCFG, reg);
2113}
2114
2115static void dwc3_update_ram_clk_sel(struct dwc3 *dwc, u32 speed)
2116{
2117 u32 reg;
2118 u32 usb30_clock = DWC3_GCTL_CLK_BUS;
2119
2120 /*
2121 * We change the clock only at SS but I dunno why I would want to do
2122 * this. Maybe it becomes part of the power saving plan.
2123 */
2124
2125 if (speed != DWC3_DSTS_SUPERSPEED)
2126 return;
2127
2128 /*
2129 * RAMClkSel is reset to 0 after USB reset, so it must be reprogrammed
2130 * each time on Connect Done.
2131 */
2132 if (!usb30_clock)
2133 return;
2134
2135 reg = dwc3_readl(dwc->regs, DWC3_GCTL);
2136 reg |= DWC3_GCTL_RAMCLKSEL(usb30_clock);
2137 dwc3_writel(dwc->regs, DWC3_GCTL, reg);
2138}
2139
2140static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
2141{
2142 struct dwc3_ep *dep;
2143 int ret;
2144 u32 reg;
2145 u8 speed;
2146
2147 reg = dwc3_readl(dwc->regs, DWC3_DSTS);
2148 speed = reg & DWC3_DSTS_CONNECTSPD;
2149 dwc->speed = speed;
2150
2151 dwc3_update_ram_clk_sel(dwc, speed);
2152
2153 switch (speed) {
2154 case DWC3_DCFG_SUPERSPEED:
2155 /*
2156 * WORKAROUND: DWC3 revisions <1.90a have an issue which
2157 * would cause a missing USB3 Reset event.
2158 *
2159 * In such situations, we should force a USB3 Reset
2160 * event by calling our dwc3_gadget_reset_interrupt()
2161 * routine.
2162 *
2163 * Refers to:
2164 *
2165 * STAR#9000483510: RTL: SS : USB3 reset event may
2166 * not be generated always when the link enters poll
2167 */
2168 if (dwc->revision < DWC3_REVISION_190A)
2169 dwc3_gadget_reset_interrupt(dwc);
2170
2171 dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
2172 dwc->gadget.ep0->maxpacket = 512;
2173 dwc->gadget.speed = USB_SPEED_SUPER;
2174 break;
2175 case DWC3_DCFG_HIGHSPEED:
2176 dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
2177 dwc->gadget.ep0->maxpacket = 64;
2178 dwc->gadget.speed = USB_SPEED_HIGH;
2179 break;
2180 case DWC3_DCFG_FULLSPEED2:
2181 case DWC3_DCFG_FULLSPEED1:
2182 dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
2183 dwc->gadget.ep0->maxpacket = 64;
2184 dwc->gadget.speed = USB_SPEED_FULL;
2185 break;
2186 case DWC3_DCFG_LOWSPEED:
2187 dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(8);
2188 dwc->gadget.ep0->maxpacket = 8;
2189 dwc->gadget.speed = USB_SPEED_LOW;
2190 break;
2191 }
2192
2193 /* Enable USB2 LPM Capability */
2194
2195 if ((dwc->revision > DWC3_REVISION_194A)
2196 && (speed != DWC3_DCFG_SUPERSPEED)) {
2197 reg = dwc3_readl(dwc->regs, DWC3_DCFG);
2198 reg |= DWC3_DCFG_LPM_CAP;
2199 dwc3_writel(dwc->regs, DWC3_DCFG, reg);
2200
2201 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
2202 reg &= ~(DWC3_DCTL_HIRD_THRES_MASK | DWC3_DCTL_L1_HIBER_EN);
2203
2204 reg |= DWC3_DCTL_HIRD_THRES(dwc->hird_threshold);
2205
2206 /*
2207 * When dwc3 revisions >= 2.40a, LPM Erratum is enabled and
2208 * DCFG.LPMCap is set, core responses with an ACK and the
2209 * BESL value in the LPM token is less than or equal to LPM
2210 * NYET threshold.
2211 */
Wolfgang Denk0cf207e2021-09-27 17:42:39 +02002212 if (dwc->revision < DWC3_REVISION_240A && dwc->has_lpm_erratum)
Kishon Vijay Abraham I747a0a52015-02-23 18:39:58 +05302213 WARN(true, "LPM Erratum not available on dwc3 revisisions < 2.40a\n");
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05302214
2215 if (dwc->has_lpm_erratum && dwc->revision >= DWC3_REVISION_240A)
2216 reg |= DWC3_DCTL_LPM_ERRATA(dwc->lpm_nyet_threshold);
2217
2218 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
2219 } else {
2220 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
2221 reg &= ~DWC3_DCTL_HIRD_THRES_MASK;
2222 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
2223 }
2224
2225 dep = dwc->eps[0];
2226 ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, true,
2227 false);
2228 if (ret) {
2229 dev_err(dwc->dev, "failed to enable %s\n", dep->name);
2230 return;
2231 }
2232
2233 dep = dwc->eps[1];
2234 ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, true,
2235 false);
2236 if (ret) {
2237 dev_err(dwc->dev, "failed to enable %s\n", dep->name);
2238 return;
2239 }
2240
2241 /*
2242 * Configure PHY via GUSB3PIPECTLn if required.
2243 *
2244 * Update GTXFIFOSIZn
2245 *
2246 * In both cases reset values should be sufficient.
2247 */
2248}
2249
2250static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc)
2251{
2252 /*
2253 * TODO take core out of low power mode when that's
2254 * implemented.
2255 */
2256
2257 dwc->gadget_driver->resume(&dwc->gadget);
2258}
2259
2260static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
2261 unsigned int evtinfo)
2262{
2263 enum dwc3_link_state next = evtinfo & DWC3_LINK_STATE_MASK;
2264 unsigned int pwropt;
2265
2266 /*
2267 * WORKAROUND: DWC3 < 2.50a have an issue when configured without
2268 * Hibernation mode enabled which would show up when device detects
2269 * host-initiated U3 exit.
2270 *
2271 * In that case, device will generate a Link State Change Interrupt
2272 * from U3 to RESUME which is only necessary if Hibernation is
2273 * configured in.
2274 *
2275 * There are no functional changes due to such spurious event and we
2276 * just need to ignore it.
2277 *
2278 * Refers to:
2279 *
2280 * STAR#9000570034 RTL: SS Resume event generated in non-Hibernation
2281 * operational mode
2282 */
2283 pwropt = DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1);
2284 if ((dwc->revision < DWC3_REVISION_250A) &&
2285 (pwropt != DWC3_GHWPARAMS1_EN_PWROPT_HIB)) {
2286 if ((dwc->link_state == DWC3_LINK_STATE_U3) &&
2287 (next == DWC3_LINK_STATE_RESUME)) {
2288 dev_vdbg(dwc->dev, "ignoring transition U3 -> Resume\n");
2289 return;
2290 }
2291 }
2292
2293 /*
2294 * WORKAROUND: DWC3 Revisions <1.83a have an issue which, depending
2295 * on the link partner, the USB session might do multiple entry/exit
2296 * of low power states before a transfer takes place.
2297 *
2298 * Due to this problem, we might experience lower throughput. The
2299 * suggested workaround is to disable DCTL[12:9] bits if we're
2300 * transitioning from U1/U2 to U0 and enable those bits again
2301 * after a transfer completes and there are no pending transfers
2302 * on any of the enabled endpoints.
2303 *
2304 * This is the first half of that workaround.
2305 *
2306 * Refers to:
2307 *
2308 * STAR#9000446952: RTL: Device SS : if U1/U2 ->U0 takes >128us
2309 * core send LGO_Ux entering U0
2310 */
2311 if (dwc->revision < DWC3_REVISION_183A) {
2312 if (next == DWC3_LINK_STATE_U0) {
2313 u32 u1u2;
2314 u32 reg;
2315
2316 switch (dwc->link_state) {
2317 case DWC3_LINK_STATE_U1:
2318 case DWC3_LINK_STATE_U2:
2319 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
2320 u1u2 = reg & (DWC3_DCTL_INITU2ENA
2321 | DWC3_DCTL_ACCEPTU2ENA
2322 | DWC3_DCTL_INITU1ENA
2323 | DWC3_DCTL_ACCEPTU1ENA);
2324
2325 if (!dwc->u1u2)
2326 dwc->u1u2 = reg & u1u2;
2327
2328 reg &= ~u1u2;
2329
2330 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
2331 break;
2332 default:
2333 /* do nothing */
2334 break;
2335 }
2336 }
2337 }
2338
2339 switch (next) {
2340 case DWC3_LINK_STATE_U1:
2341 if (dwc->speed == USB_SPEED_SUPER)
2342 dwc3_suspend_gadget(dwc);
2343 break;
2344 case DWC3_LINK_STATE_U2:
2345 case DWC3_LINK_STATE_U3:
2346 dwc3_suspend_gadget(dwc);
2347 break;
2348 case DWC3_LINK_STATE_RESUME:
2349 dwc3_resume_gadget(dwc);
2350 break;
2351 default:
2352 /* do nothing */
2353 break;
2354 }
2355
2356 dwc->link_state = next;
2357}
2358
2359static void dwc3_gadget_hibernation_interrupt(struct dwc3 *dwc,
2360 unsigned int evtinfo)
2361{
Lukasz Majewski2252d152015-03-03 17:32:08 +01002362 unsigned int is_ss = evtinfo & (1UL << 4);
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05302363
2364 /**
2365 * WORKAROUND: DWC3 revison 2.20a with hibernation support
2366 * have a known issue which can cause USB CV TD.9.23 to fail
2367 * randomly.
2368 *
2369 * Because of this issue, core could generate bogus hibernation
2370 * events which SW needs to ignore.
2371 *
2372 * Refers to:
2373 *
2374 * STAR#9000546576: Device Mode Hibernation: Issue in USB 2.0
2375 * Device Fallback from SuperSpeed
2376 */
2377 if (is_ss ^ (dwc->speed == USB_SPEED_SUPER))
2378 return;
2379
2380 /* enter hibernation here */
2381}
2382
2383static void dwc3_gadget_interrupt(struct dwc3 *dwc,
2384 const struct dwc3_event_devt *event)
2385{
2386 switch (event->type) {
2387 case DWC3_DEVICE_EVENT_DISCONNECT:
2388 dwc3_gadget_disconnect_interrupt(dwc);
2389 break;
2390 case DWC3_DEVICE_EVENT_RESET:
2391 dwc3_gadget_reset_interrupt(dwc);
2392 break;
2393 case DWC3_DEVICE_EVENT_CONNECT_DONE:
2394 dwc3_gadget_conndone_interrupt(dwc);
2395 break;
2396 case DWC3_DEVICE_EVENT_WAKEUP:
2397 dwc3_gadget_wakeup_interrupt(dwc);
2398 break;
2399 case DWC3_DEVICE_EVENT_HIBER_REQ:
Kishon Vijay Abraham I747a0a52015-02-23 18:39:58 +05302400 if (!dwc->has_hibernation) {
2401 WARN(1 ,"unexpected hibernation event\n");
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05302402 break;
Kishon Vijay Abraham I747a0a52015-02-23 18:39:58 +05302403 }
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05302404 dwc3_gadget_hibernation_interrupt(dwc, event->event_info);
2405 break;
2406 case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE:
2407 dwc3_gadget_linksts_change_interrupt(dwc, event->event_info);
2408 break;
2409 case DWC3_DEVICE_EVENT_EOPF:
2410 dev_vdbg(dwc->dev, "End of Periodic Frame\n");
2411 break;
2412 case DWC3_DEVICE_EVENT_SOF:
2413 dev_vdbg(dwc->dev, "Start of Periodic Frame\n");
2414 break;
2415 case DWC3_DEVICE_EVENT_ERRATIC_ERROR:
2416 dev_vdbg(dwc->dev, "Erratic Error\n");
2417 break;
2418 case DWC3_DEVICE_EVENT_CMD_CMPL:
2419 dev_vdbg(dwc->dev, "Command Complete\n");
2420 break;
2421 case DWC3_DEVICE_EVENT_OVERFLOW:
2422 dev_vdbg(dwc->dev, "Overflow\n");
2423 break;
2424 default:
2425 dev_dbg(dwc->dev, "UNKNOWN IRQ %d\n", event->type);
2426 }
2427}
2428
2429static void dwc3_process_event_entry(struct dwc3 *dwc,
2430 const union dwc3_event *event)
2431{
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05302432 /* Endpoint IRQ, handle it and return early */
2433 if (event->type.is_devspec == 0) {
2434 /* depevt */
2435 return dwc3_endpoint_interrupt(dwc, &event->depevt);
2436 }
2437
2438 switch (event->type.type) {
2439 case DWC3_EVENT_TYPE_DEV:
2440 dwc3_gadget_interrupt(dwc, &event->devt);
2441 break;
2442 /* REVISIT what to do with Carkit and I2C events ? */
2443 default:
2444 dev_err(dwc->dev, "UNKNOWN IRQ type %d\n", event->raw);
2445 }
2446}
2447
2448static irqreturn_t dwc3_process_event_buf(struct dwc3 *dwc, u32 buf)
2449{
2450 struct dwc3_event_buffer *evt;
2451 irqreturn_t ret = IRQ_NONE;
2452 int left;
2453 u32 reg;
2454
2455 evt = dwc->ev_buffs[buf];
2456 left = evt->count;
2457
2458 if (!(evt->flags & DWC3_EVENT_PENDING))
2459 return IRQ_NONE;
2460
2461 while (left > 0) {
2462 union dwc3_event event;
2463
2464 event.raw = *(u32 *) (evt->buf + evt->lpos);
2465
2466 dwc3_process_event_entry(dwc, &event);
2467
2468 /*
2469 * FIXME we wrap around correctly to the next entry as
2470 * almost all entries are 4 bytes in size. There is one
2471 * entry which has 12 bytes which is a regular entry
2472 * followed by 8 bytes data. ATM I don't know how
2473 * things are organized if we get next to the a
2474 * boundary so I worry about that once we try to handle
2475 * that.
2476 */
2477 evt->lpos = (evt->lpos + 4) % DWC3_EVENT_BUFFERS_SIZE;
2478 left -= 4;
2479
2480 dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(buf), 4);
2481 }
2482
2483 evt->count = 0;
2484 evt->flags &= ~DWC3_EVENT_PENDING;
2485 ret = IRQ_HANDLED;
2486
2487 /* Unmask interrupt */
2488 reg = dwc3_readl(dwc->regs, DWC3_GEVNTSIZ(buf));
2489 reg &= ~DWC3_GEVNTSIZ_INTMASK;
2490 dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(buf), reg);
2491
2492 return ret;
2493}
2494
2495static irqreturn_t dwc3_thread_interrupt(int irq, void *_dwc)
2496{
2497 struct dwc3 *dwc = _dwc;
2498 unsigned long flags;
2499 irqreturn_t ret = IRQ_NONE;
2500 int i;
2501
2502 spin_lock_irqsave(&dwc->lock, flags);
2503
2504 for (i = 0; i < dwc->num_event_buffers; i++)
2505 ret |= dwc3_process_event_buf(dwc, i);
2506
2507 spin_unlock_irqrestore(&dwc->lock, flags);
2508
2509 return ret;
2510}
2511
2512static irqreturn_t dwc3_check_event_buf(struct dwc3 *dwc, u32 buf)
2513{
2514 struct dwc3_event_buffer *evt;
2515 u32 count;
2516 u32 reg;
2517
2518 evt = dwc->ev_buffs[buf];
2519
2520 count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(buf));
2521 count &= DWC3_GEVNTCOUNT_MASK;
2522 if (!count)
2523 return IRQ_NONE;
2524
2525 evt->count = count;
2526 evt->flags |= DWC3_EVENT_PENDING;
2527
2528 /* Mask interrupt */
2529 reg = dwc3_readl(dwc->regs, DWC3_GEVNTSIZ(buf));
2530 reg |= DWC3_GEVNTSIZ_INTMASK;
2531 dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(buf), reg);
2532
2533 return IRQ_WAKE_THREAD;
2534}
2535
2536static irqreturn_t dwc3_interrupt(int irq, void *_dwc)
2537{
2538 struct dwc3 *dwc = _dwc;
2539 int i;
2540 irqreturn_t ret = IRQ_NONE;
2541
2542 spin_lock(&dwc->lock);
2543
2544 for (i = 0; i < dwc->num_event_buffers; i++) {
2545 irqreturn_t status;
2546
2547 status = dwc3_check_event_buf(dwc, i);
2548 if (status == IRQ_WAKE_THREAD)
2549 ret = status;
2550 }
2551
2552 spin_unlock(&dwc->lock);
2553
2554 return ret;
2555}
2556
2557/**
2558 * dwc3_gadget_init - Initializes gadget related registers
2559 * @dwc: pointer to our controller context structure
2560 *
2561 * Returns 0 on success otherwise negative errno.
2562 */
2563int dwc3_gadget_init(struct dwc3 *dwc)
2564{
2565 int ret;
2566
Kishon Vijay Abraham I747a0a52015-02-23 18:39:58 +05302567 dwc->ctrl_req = dma_alloc_coherent(sizeof(*dwc->ctrl_req),
2568 (unsigned long *)&dwc->ctrl_req_addr);
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05302569 if (!dwc->ctrl_req) {
2570 dev_err(dwc->dev, "failed to allocate ctrl request\n");
2571 ret = -ENOMEM;
2572 goto err0;
2573 }
2574
Kishon Vijay Abraham I8d488f32015-02-23 18:40:15 +05302575 dwc->ep0_trb = dma_alloc_coherent(sizeof(*dwc->ep0_trb) * 2,
Kishon Vijay Abraham I747a0a52015-02-23 18:39:58 +05302576 (unsigned long *)&dwc->ep0_trb_addr);
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05302577 if (!dwc->ep0_trb) {
2578 dev_err(dwc->dev, "failed to allocate ep0 trb\n");
2579 ret = -ENOMEM;
2580 goto err1;
2581 }
2582
Kishon Vijay Abraham I526a50f2015-02-23 18:40:13 +05302583 dwc->setup_buf = memalign(CONFIG_SYS_CACHELINE_SIZE,
2584 DWC3_EP0_BOUNCE_SIZE);
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05302585 if (!dwc->setup_buf) {
2586 ret = -ENOMEM;
2587 goto err2;
2588 }
2589
Kishon Vijay Abraham I747a0a52015-02-23 18:39:58 +05302590 dwc->ep0_bounce = dma_alloc_coherent(DWC3_EP0_BOUNCE_SIZE,
2591 (unsigned long *)&dwc->ep0_bounce_addr);
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05302592 if (!dwc->ep0_bounce) {
2593 dev_err(dwc->dev, "failed to allocate ep0 bounce buffer\n");
2594 ret = -ENOMEM;
2595 goto err3;
2596 }
2597
2598 dwc->gadget.ops = &dwc3_gadget_ops;
2599 dwc->gadget.max_speed = USB_SPEED_SUPER;
2600 dwc->gadget.speed = USB_SPEED_UNKNOWN;
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05302601 dwc->gadget.name = "dwc3-gadget";
2602
2603 /*
2604 * Per databook, DWC3 needs buffer size to be aligned to MaxPacketSize
2605 * on ep out.
2606 */
2607 dwc->gadget.quirk_ep_out_aligned_size = true;
2608
2609 /*
2610 * REVISIT: Here we should clear all pending IRQs to be
2611 * sure we're starting from a well known location.
2612 */
2613
2614 ret = dwc3_gadget_init_endpoints(dwc);
2615 if (ret)
2616 goto err4;
2617
Mugunthan V N23ba2d62018-05-18 13:15:04 +02002618 ret = usb_add_gadget_udc((struct device *)dwc->dev, &dwc->gadget);
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05302619 if (ret) {
2620 dev_err(dwc->dev, "failed to register udc\n");
2621 goto err4;
2622 }
2623
2624 return 0;
2625
2626err4:
2627 dwc3_gadget_free_endpoints(dwc);
Kishon Vijay Abraham I747a0a52015-02-23 18:39:58 +05302628 dma_free_coherent(dwc->ep0_bounce);
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05302629
2630err3:
2631 kfree(dwc->setup_buf);
2632
2633err2:
Kishon Vijay Abraham I747a0a52015-02-23 18:39:58 +05302634 dma_free_coherent(dwc->ep0_trb);
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05302635
2636err1:
Kishon Vijay Abraham I747a0a52015-02-23 18:39:58 +05302637 dma_free_coherent(dwc->ctrl_req);
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05302638
2639err0:
2640 return ret;
2641}
2642
2643/* -------------------------------------------------------------------------- */
2644
2645void dwc3_gadget_exit(struct dwc3 *dwc)
2646{
2647 usb_del_gadget_udc(&dwc->gadget);
2648
2649 dwc3_gadget_free_endpoints(dwc);
2650
Kishon Vijay Abraham I747a0a52015-02-23 18:39:58 +05302651 dma_free_coherent(dwc->ep0_bounce);
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05302652
2653 kfree(dwc->setup_buf);
2654
Kishon Vijay Abraham I747a0a52015-02-23 18:39:58 +05302655 dma_free_coherent(dwc->ep0_trb);
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05302656
Kishon Vijay Abraham I747a0a52015-02-23 18:39:58 +05302657 dma_free_coherent(dwc->ctrl_req);
2658}
2659
2660/**
2661 * dwc3_gadget_uboot_handle_interrupt - handle dwc3 gadget interrupt
2662 * @dwc: struct dwce *
2663 *
2664 * Handles ep0 and gadget interrupt
2665 *
2666 * Should be called from dwc3 core.
2667 */
2668void dwc3_gadget_uboot_handle_interrupt(struct dwc3 *dwc)
2669{
Marek Szyprowski137f7c52015-03-03 17:32:12 +01002670 int ret = dwc3_interrupt(0, dwc);
2671
2672 if (ret == IRQ_WAKE_THREAD) {
2673 int i;
2674 struct dwc3_event_buffer *evt;
2675
Philipp Tomsich889239d2017-04-06 16:58:53 +02002676 dwc3_thread_interrupt(0, dwc);
2677
2678 /* Clean + Invalidate the buffers after touching them */
Marek Szyprowski137f7c52015-03-03 17:32:12 +01002679 for (i = 0; i < dwc->num_event_buffers; i++) {
2680 evt = dwc->ev_buffs[i];
Philipp Tomsichb7bf4a92017-04-06 16:58:52 +02002681 dwc3_flush_cache((uintptr_t)evt->buf, evt->length);
Marek Szyprowski137f7c52015-03-03 17:32:12 +01002682 }
Marek Szyprowski137f7c52015-03-03 17:32:12 +01002683 }
Kishon Vijay Abraham I85d5e702015-02-23 18:39:50 +05302684}