blob: 593bf38d7e93d66e4a5d8ff3a41d820f23c3f761 [file] [log] [blame]
Adrian Alonso1a8150d2015-09-03 11:49:28 -05001/*
2 * Copyright (C) 2015 Freescale Semiconductor, Inc.
3 *
4 * Configuration settings for the Freescale i.MX7D SABRESD board.
5 *
6 * SPDX-License-Identifier: GPL-2.0+
7 */
8
9#ifndef __MX7D_SABRESD_CONFIG_H
10#define __MX7D_SABRESD_CONFIG_H
11
12#include "mx7_common.h"
13
14#define CONFIG_DBG_MONITOR
15#define PHYS_SDRAM_SIZE SZ_1G
16
Fabio Estevam5d692692016-02-22 18:41:48 -030017#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR
18
Fabio Estevam6baa2612016-03-26 13:30:49 -030019/* Size of malloc() pool */
20#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M)
21
Adrian Alonso1a8150d2015-09-03 11:49:28 -050022/* Network */
Adrian Alonso1a8150d2015-09-03 11:49:28 -050023#define CONFIG_FEC_MXC
24#define CONFIG_MII
25#define CONFIG_FEC_XCV_TYPE RGMII
26#define CONFIG_ETHPRIME "FEC"
27#define CONFIG_FEC_MXC_PHYADDR 0
28
Adrian Alonso1a8150d2015-09-03 11:49:28 -050029#define CONFIG_PHY_BROADCOM
Adrian Alonso1a8150d2015-09-03 11:49:28 -050030/* ENET1 */
31#define IMX_FEC_BASE ENET_IPS_BASE_ADDR
32
33/* MMC Config*/
34#define CONFIG_SYS_FSL_ESDHC_ADDR 0
35
Adrian Alonso1a8150d2015-09-03 11:49:28 -050036#undef CONFIG_BOOTM_NETBSD
37#undef CONFIG_BOOTM_PLAN9
38#undef CONFIG_BOOTM_RTEMS
39
Adrian Alonso1a8150d2015-09-03 11:49:28 -050040/* I2C configs */
Adrian Alonso1a8150d2015-09-03 11:49:28 -050041#define CONFIG_SYS_I2C_MXC
Adrian Alonso1a8150d2015-09-03 11:49:28 -050042#define CONFIG_SYS_I2C_SPEED 100000
43
44#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
45#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
46
Peng Fan79e355f2016-01-28 16:55:08 +080047#ifdef CONFIG_IMX_BOOTAUX
48/* Set to QSPI1 A flash at default */
49#define CONFIG_SYS_AUXCORE_BOOTDATA 0x60000000
Peng Fan79e355f2016-01-28 16:55:08 +080050
51#define UPDATE_M4_ENV \
52 "m4image=m4_qspi.bin\0" \
53 "loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \
54 "update_m4_from_sd=" \
55 "if sf probe 0:0; then " \
56 "if run loadm4image; then " \
57 "setexpr fw_sz ${filesize} + 0xffff; " \
58 "setexpr fw_sz ${fw_sz} / 0x10000; " \
59 "setexpr fw_sz ${fw_sz} * 0x10000; " \
60 "sf erase 0x0 ${fw_sz}; " \
61 "sf write ${loadaddr} 0x0 ${filesize}; " \
62 "fi; " \
63 "fi\0" \
64 "m4boot=sf probe 0:0; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0"
65#else
66#define UPDATE_M4_ENV ""
67#endif
68
Adrian Alonso1a8150d2015-09-03 11:49:28 -050069#define CONFIG_MFG_ENV_SETTINGS \
70 "mfgtool_args=setenv bootargs console=${console},${baudrate} " \
71 "rdinit=/linuxrc " \
72 "g_mass_storage.stall=0 g_mass_storage.removable=1 " \
73 "g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
74 "g_mass_storage.iSerialNumber=\"\" "\
75 "clk_ignore_unused "\
76 "\0" \
77 "initrd_addr=0x83800000\0" \
78 "initrd_high=0xffffffff\0" \
79 "bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
80
Tzu-Jung Lee73f1b802015-10-27 23:00:50 +000081#define CONFIG_DFU_ENV_SETTINGS \
82 "dfu_alt_info=image raw 0 0x800000;"\
83 "u-boot raw 0 0x4000;"\
84 "bootimg part 0 1;"\
85 "rootfs part 0 2\0" \
86
Adrian Alonso1a8150d2015-09-03 11:49:28 -050087#define CONFIG_EXTRA_ENV_SETTINGS \
Peng Fan79e355f2016-01-28 16:55:08 +080088 UPDATE_M4_ENV \
Adrian Alonso1a8150d2015-09-03 11:49:28 -050089 CONFIG_MFG_ENV_SETTINGS \
Tzu-Jung Lee73f1b802015-10-27 23:00:50 +000090 CONFIG_DFU_ENV_SETTINGS \
Adrian Alonso1a8150d2015-09-03 11:49:28 -050091 "script=boot.scr\0" \
92 "image=zImage\0" \
93 "console=ttymxc0\0" \
94 "fdt_high=0xffffffff\0" \
95 "initrd_high=0xffffffff\0" \
96 "fdt_file=imx7d-sdb.dtb\0" \
97 "fdt_addr=0x83000000\0" \
98 "boot_fdt=try\0" \
99 "ip_dyn=yes\0" \
Peng Fanebe517b2015-10-29 15:54:53 +0800100 "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
Adrian Alonso1a8150d2015-09-03 11:49:28 -0500101 "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
102 "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
103 "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
104 "mmcautodetect=yes\0" \
105 "mmcargs=setenv bootargs console=${console},${baudrate} " \
106 "root=${mmcroot}\0" \
107 "loadbootscript=" \
108 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
109 "bootscript=echo Running bootscript from mmc ...; " \
110 "source\0" \
111 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
112 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
113 "mmcboot=echo Booting from mmc ...; " \
114 "run mmcargs; " \
115 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
116 "if run loadfdt; then " \
117 "bootz ${loadaddr} - ${fdt_addr}; " \
118 "else " \
119 "if test ${boot_fdt} = try; then " \
120 "bootz; " \
121 "else " \
122 "echo WARN: Cannot load the DT; " \
123 "fi; " \
124 "fi; " \
125 "else " \
126 "bootz; " \
127 "fi;\0" \
128 "netargs=setenv bootargs console=${console},${baudrate} " \
129 "root=/dev/nfs " \
130 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
131 "netboot=echo Booting from net ...; " \
132 "run netargs; " \
133 "if test ${ip_dyn} = yes; then " \
134 "setenv get_cmd dhcp; " \
135 "else " \
136 "setenv get_cmd tftp; " \
137 "fi; " \
138 "${get_cmd} ${image}; " \
139 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
140 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
141 "bootz ${loadaddr} - ${fdt_addr}; " \
142 "else " \
143 "if test ${boot_fdt} = try; then " \
144 "bootz; " \
145 "else " \
146 "echo WARN: Cannot load the DT; " \
147 "fi; " \
148 "fi; " \
149 "else " \
150 "bootz; " \
151 "fi;\0"
152
153#define CONFIG_BOOTCOMMAND \
154 "mmc dev ${mmcdev};" \
155 "mmc dev ${mmcdev}; if mmc rescan; then " \
156 "if run loadbootscript; then " \
157 "run bootscript; " \
158 "else " \
159 "if run loadimage; then " \
160 "run mmcboot; " \
161 "else run netboot; " \
162 "fi; " \
163 "fi; " \
164 "else run netboot; fi"
165
Adrian Alonso1a8150d2015-09-03 11:49:28 -0500166#define CONFIG_SYS_MEMTEST_START 0x80000000
167#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x20000000)
168
169#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
170#define CONFIG_SYS_HZ 1000
171
Adrian Alonso1a8150d2015-09-03 11:49:28 -0500172/* Physical Memory Map */
173#define CONFIG_NR_DRAM_BANKS 1
174#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
175
176#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
177#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
178#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
179
180#define CONFIG_SYS_INIT_SP_OFFSET \
181 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
182#define CONFIG_SYS_INIT_SP_ADDR \
183 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
184
Masahiro Yamadae856bdc2017-02-11 22:43:54 +0900185/* environment organization */
Adrian Alonso1a8150d2015-09-03 11:49:28 -0500186#define CONFIG_ENV_SIZE SZ_8K
Peng Fan6e1a41c2015-12-22 17:04:24 +0800187
188/*
189 * If want to use nand, define CONFIG_NAND_MXS and rework board
190 * to support nand, since emmc has pin conflicts with nand
191 */
192#ifdef CONFIG_NAND_MXS
Peng Fan6e1a41c2015-12-22 17:04:24 +0800193/* NAND stuff */
194#define CONFIG_SYS_MAX_NAND_DEVICE 1
195#define CONFIG_SYS_NAND_BASE 0x40000000
196#define CONFIG_SYS_NAND_5_ADDR_CYCLE
197#define CONFIG_SYS_NAND_ONFI_DETECTION
198
199/* DMA stuff, needed for GPMI/MXS NAND support */
200#define CONFIG_APBH_DMA
201#define CONFIG_APBH_DMA_BURST
202#define CONFIG_APBH_DMA_BURST8
203#endif
204
Fabio Estevamda384fc2017-05-28 14:07:24 -0300205#define CONFIG_ENV_OFFSET (12 * SZ_64K)
Peng Fan6e1a41c2015-12-22 17:04:24 +0800206#ifdef CONFIG_NAND_MXS
207#define CONFIG_SYS_FSL_USDHC_NUM 1
208#else
Adrian Alonso1a8150d2015-09-03 11:49:28 -0500209#define CONFIG_SYS_FSL_USDHC_NUM 2
Peng Fan6e1a41c2015-12-22 17:04:24 +0800210#endif
Adrian Alonso1a8150d2015-09-03 11:49:28 -0500211
212#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 */
213#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */
214#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */
215
Adrian Alonso1a8150d2015-09-03 11:49:28 -0500216/* USB Configs */
Adrian Alonso1a8150d2015-09-03 11:49:28 -0500217#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
Adrian Alonso1a8150d2015-09-03 11:49:28 -0500218
219#define CONFIG_IMX_THERMAL
220
Tzu-Jung Lee73f1b802015-10-27 23:00:50 +0000221#define CONFIG_USBD_HS
Tzu-Jung Lee73f1b802015-10-27 23:00:50 +0000222
Tzu-Jung Lee73f1b802015-10-27 23:00:50 +0000223#define CONFIG_USB_FUNCTION_MASS_STORAGE
Tzu-Jung Lee73f1b802015-10-27 23:00:50 +0000224
Peng Fanebe517b2015-10-29 15:54:53 +0800225#ifdef CONFIG_VIDEO
Peng Fanebe517b2015-10-29 15:54:53 +0800226#define CONFIG_VIDEO_MXS
227#define CONFIG_VIDEO_LOGO
Peng Fanebe517b2015-10-29 15:54:53 +0800228#define CONFIG_SPLASH_SCREEN
229#define CONFIG_SPLASH_SCREEN_ALIGN
Peng Fanebe517b2015-10-29 15:54:53 +0800230#define CONFIG_BMP_16BPP
231#define CONFIG_VIDEO_BMP_RLE8
232#define CONFIG_VIDEO_BMP_LOGO
233#endif
234
Peng Fan53cc6472015-11-30 17:45:02 +0800235#ifdef CONFIG_FSL_QSPI
Peng Fan53cc6472015-11-30 17:45:02 +0800236#define CONFIG_SPI_FLASH
237#define CONFIG_SPI_FLASH_MACRONIX
238#define CONFIG_SPI_FLASH_BAR
239#define CONFIG_SF_DEFAULT_BUS 0
240#define CONFIG_SF_DEFAULT_CS 0
241#define CONFIG_SF_DEFAULT_SPEED 40000000
242#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
243#define FSL_QSPI_FLASH_NUM 1
244#define FSL_QSPI_FLASH_SIZE SZ_64M
245#define QSPI0_BASE_ADDR QSPI1_IPS_BASE_ADDR
246#define QSPI0_AMBA_BASE QSPI0_ARB_BASE_ADDR
247#endif
248
Adrian Alonso1a8150d2015-09-03 11:49:28 -0500249#endif /* __CONFIG_H */