Suneel Garapati | f7331c6 | 2020-07-30 13:56:13 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * Copyright (C) 2018 Marvell International Ltd. |
| 4 | * |
| 5 | * (C) Copyright 2011 |
| 6 | * eInfochips Ltd. <www.einfochips.com> |
| 7 | * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com> |
| 8 | * |
| 9 | * (C) Copyright 2010 |
| 10 | * Marvell Semiconductor <www.marvell.com> |
| 11 | */ |
| 12 | |
| 13 | #include <dm.h> |
| 14 | #include <pci.h> |
| 15 | #include <pci_ids.h> |
| 16 | #include <asm/gpio.h> |
| 17 | #include <asm/io.h> |
| 18 | #include <linux/bitfield.h> |
| 19 | #include <linux/compat.h> |
| 20 | #include <dt-bindings/gpio/gpio.h> |
| 21 | |
| 22 | /* Returns the bit value to write or read based on the offset */ |
| 23 | #define GPIO_BIT(x) BIT_ULL((x) & 0x3f) |
| 24 | |
| 25 | #define GPIO_RX_DAT 0x00 |
| 26 | #define GPIO_TX_SET 0x08 |
| 27 | #define GPIO_TX_CLR 0x10 |
| 28 | #define GPIO_CONST 0x90 /* OcteonTX only */ |
| 29 | |
| 30 | /* Offset to register-set for 2nd GPIOs (> 63), OcteonTX only */ |
| 31 | #define GPIO1_OFFSET 0x1400 |
| 32 | |
| 33 | /* GPIO_CONST register bits */ |
| 34 | #define GPIO_CONST_GPIOS_MASK GENMASK_ULL(7, 0) |
| 35 | |
| 36 | /* GPIO_BIT_CFG register bits */ |
| 37 | #define GPIO_BIT_CFG_TX_OE BIT_ULL(0) |
| 38 | #define GPIO_BIT_CFG_PIN_XOR BIT_ULL(1) |
| 39 | #define GPIO_BIT_CFG_INT_EN BIT_ULL(2) |
| 40 | #define GPIO_BIT_CFG_PIN_SEL_MASK GENMASK_ULL(26, 16) |
| 41 | |
| 42 | enum { |
| 43 | PROBE_PCI = 0, /* PCI based probing */ |
| 44 | PROBE_DT, /* DT based probing */ |
| 45 | }; |
| 46 | |
| 47 | struct octeon_gpio_data { |
| 48 | int probe; |
| 49 | u32 reg_offs; |
| 50 | u32 gpio_bit_cfg_offs; |
| 51 | }; |
| 52 | |
| 53 | struct octeon_gpio { |
| 54 | void __iomem *base; |
| 55 | const struct octeon_gpio_data *data; |
| 56 | }; |
| 57 | |
| 58 | /* Returns the offset to the output register based on the offset and value */ |
| 59 | static u32 gpio_tx_reg(int offset, int value) |
| 60 | { |
| 61 | u32 ret; |
| 62 | |
| 63 | ret = value ? GPIO_TX_SET : GPIO_TX_CLR; |
| 64 | if (offset > 63) |
| 65 | ret += GPIO1_OFFSET; |
| 66 | |
| 67 | return ret; |
| 68 | } |
| 69 | |
| 70 | /* Returns the offset to the input data register based on the offset */ |
| 71 | static u32 gpio_rx_dat_reg(int offset) |
| 72 | { |
| 73 | u32 ret; |
| 74 | |
| 75 | ret = GPIO_RX_DAT; |
| 76 | if (offset > 63) |
| 77 | ret += GPIO1_OFFSET; |
| 78 | |
| 79 | return ret; |
| 80 | } |
| 81 | |
| 82 | static int octeon_gpio_dir_input(struct udevice *dev, unsigned int offset) |
| 83 | { |
| 84 | struct octeon_gpio *gpio = dev_get_priv(dev); |
| 85 | |
| 86 | debug("%s(%s, %u)\n", __func__, dev->name, offset); |
| 87 | clrbits_64(gpio->base + gpio->data->gpio_bit_cfg_offs + 8 * offset, |
| 88 | GPIO_BIT_CFG_TX_OE | GPIO_BIT_CFG_PIN_XOR | |
| 89 | GPIO_BIT_CFG_INT_EN | GPIO_BIT_CFG_PIN_SEL_MASK); |
| 90 | |
| 91 | return 0; |
| 92 | } |
| 93 | |
| 94 | static int octeon_gpio_dir_output(struct udevice *dev, unsigned int offset, |
| 95 | int value) |
| 96 | { |
| 97 | struct octeon_gpio *gpio = dev_get_priv(dev); |
| 98 | |
| 99 | debug("%s(%s, %u, %d)\n", __func__, dev->name, offset, value); |
| 100 | writeq(GPIO_BIT(offset), gpio->base + gpio->data->reg_offs + |
| 101 | gpio_tx_reg(offset, value)); |
| 102 | |
| 103 | clrsetbits_64(gpio->base + gpio->data->gpio_bit_cfg_offs + 8 * offset, |
| 104 | GPIO_BIT_CFG_PIN_SEL_MASK | GPIO_BIT_CFG_INT_EN, |
| 105 | GPIO_BIT_CFG_TX_OE); |
| 106 | |
| 107 | return 0; |
| 108 | } |
| 109 | |
| 110 | static int octeon_gpio_get_value(struct udevice *dev, unsigned int offset) |
| 111 | { |
| 112 | struct octeon_gpio *gpio = dev_get_priv(dev); |
| 113 | u64 reg = readq(gpio->base + gpio->data->reg_offs + |
| 114 | gpio_rx_dat_reg(offset)); |
| 115 | |
| 116 | debug("%s(%s, %u): value: %d\n", __func__, dev->name, offset, |
| 117 | !!(reg & GPIO_BIT(offset))); |
| 118 | |
| 119 | return !!(reg & GPIO_BIT(offset)); |
| 120 | } |
| 121 | |
| 122 | static int octeon_gpio_set_value(struct udevice *dev, |
| 123 | unsigned int offset, int value) |
| 124 | { |
| 125 | struct octeon_gpio *gpio = dev_get_priv(dev); |
| 126 | |
| 127 | debug("%s(%s, %u, %d)\n", __func__, dev->name, offset, value); |
| 128 | writeq(GPIO_BIT(offset), gpio->base + gpio->data->reg_offs + |
| 129 | gpio_tx_reg(offset, value)); |
| 130 | |
| 131 | return 0; |
| 132 | } |
| 133 | |
| 134 | static int octeon_gpio_get_function(struct udevice *dev, unsigned int offset) |
| 135 | { |
| 136 | struct octeon_gpio *gpio = dev_get_priv(dev); |
| 137 | u64 val = readq(gpio->base + gpio->data->gpio_bit_cfg_offs + |
| 138 | 8 * offset); |
| 139 | int pin_sel; |
| 140 | |
| 141 | debug("%s(%s, %u): GPIO_BIT_CFG: 0x%llx\n", __func__, dev->name, |
| 142 | offset, val); |
| 143 | pin_sel = FIELD_GET(GPIO_BIT_CFG_PIN_SEL_MASK, val); |
| 144 | if (pin_sel) |
| 145 | return GPIOF_FUNC; |
| 146 | else if (val & GPIO_BIT_CFG_TX_OE) |
| 147 | return GPIOF_OUTPUT; |
| 148 | else |
| 149 | return GPIOF_INPUT; |
| 150 | } |
| 151 | |
| 152 | static int octeon_gpio_xlate(struct udevice *dev, struct gpio_desc *desc, |
| 153 | struct ofnode_phandle_args *args) |
| 154 | { |
| 155 | if (args->args_count < 1) |
| 156 | return -EINVAL; |
| 157 | |
| 158 | desc->offset = args->args[0]; |
| 159 | desc->flags = 0; |
| 160 | if (args->args_count > 1) { |
| 161 | if (args->args[1] & GPIO_ACTIVE_LOW) |
| 162 | desc->flags |= GPIOD_ACTIVE_LOW; |
| 163 | /* In the future add tri-state flag support */ |
| 164 | } |
| 165 | return 0; |
| 166 | } |
| 167 | |
| 168 | static const struct dm_gpio_ops octeon_gpio_ops = { |
| 169 | .direction_input = octeon_gpio_dir_input, |
| 170 | .direction_output = octeon_gpio_dir_output, |
| 171 | .get_value = octeon_gpio_get_value, |
| 172 | .set_value = octeon_gpio_set_value, |
| 173 | .get_function = octeon_gpio_get_function, |
| 174 | .xlate = octeon_gpio_xlate, |
| 175 | }; |
| 176 | |
| 177 | static int octeon_gpio_probe(struct udevice *dev) |
| 178 | { |
| 179 | struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); |
| 180 | struct octeon_gpio *priv = dev_get_priv(dev); |
| 181 | char *end; |
| 182 | |
| 183 | priv->data = (const struct octeon_gpio_data *)dev_get_driver_data(dev); |
| 184 | |
| 185 | if (priv->data->probe == PROBE_PCI) { |
| 186 | priv->base = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_0, |
| 187 | PCI_REGION_MEM); |
| 188 | uc_priv->gpio_count = readq(priv->base + |
| 189 | priv->data->reg_offs + GPIO_CONST) & |
| 190 | GPIO_CONST_GPIOS_MASK; |
| 191 | } else { |
| 192 | priv->base = dev_remap_addr(dev); |
Simon Glass | f10643c | 2020-12-19 10:40:14 -0700 | [diff] [blame^] | 193 | uc_priv->gpio_count = ofnode_read_u32_default(dev_ofnode(dev), |
Suneel Garapati | f7331c6 | 2020-07-30 13:56:13 +0200 | [diff] [blame] | 194 | "nr-gpios", 32); |
| 195 | } |
| 196 | |
| 197 | if (!priv->base) { |
| 198 | debug("%s(%s): Could not get base address\n", |
| 199 | __func__, dev->name); |
| 200 | return -ENODEV; |
| 201 | } |
| 202 | |
| 203 | uc_priv->bank_name = strdup(dev->name); |
| 204 | end = strchr(uc_priv->bank_name, '@'); |
Simon Glass | 8b85dfc | 2020-12-16 21:20:07 -0700 | [diff] [blame] | 205 | end[0] = 'A' + dev_seq(dev); |
Suneel Garapati | f7331c6 | 2020-07-30 13:56:13 +0200 | [diff] [blame] | 206 | end[1] = '\0'; |
| 207 | |
| 208 | debug("%s(%s): base address: %p, pin count: %d\n", |
| 209 | __func__, dev->name, priv->base, uc_priv->gpio_count); |
| 210 | |
| 211 | return 0; |
| 212 | } |
| 213 | |
| 214 | static const struct octeon_gpio_data gpio_octeon_data = { |
| 215 | .probe = PROBE_DT, |
| 216 | .reg_offs = 0x80, |
| 217 | .gpio_bit_cfg_offs = 0x100, |
| 218 | }; |
| 219 | |
| 220 | static const struct octeon_gpio_data gpio_octeontx_data = { |
| 221 | .probe = PROBE_PCI, |
| 222 | .reg_offs = 0x00, |
| 223 | .gpio_bit_cfg_offs = 0x400, |
| 224 | }; |
| 225 | |
| 226 | static const struct udevice_id octeon_gpio_ids[] = { |
| 227 | { .compatible = "cavium,thunder-8890-gpio", |
| 228 | .data = (ulong)&gpio_octeontx_data }, |
| 229 | { .compatible = "cavium,octeon-7890-gpio", |
| 230 | .data = (ulong)&gpio_octeon_data }, |
| 231 | { } |
| 232 | }; |
| 233 | |
| 234 | U_BOOT_DRIVER(octeon_gpio) = { |
| 235 | .name = "octeon_gpio", |
| 236 | .id = UCLASS_GPIO, |
| 237 | .of_match = of_match_ptr(octeon_gpio_ids), |
| 238 | .probe = octeon_gpio_probe, |
Simon Glass | 41575d8 | 2020-12-03 16:55:17 -0700 | [diff] [blame] | 239 | .priv_auto = sizeof(struct octeon_gpio), |
Suneel Garapati | f7331c6 | 2020-07-30 13:56:13 +0200 | [diff] [blame] | 240 | .ops = &octeon_gpio_ops, |
| 241 | .flags = DM_FLAG_PRE_RELOC, |
| 242 | }; |