| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2018 Marvell International Ltd. |
| * |
| * (C) Copyright 2011 |
| * eInfochips Ltd. <www.einfochips.com> |
| * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com> |
| * |
| * (C) Copyright 2010 |
| * Marvell Semiconductor <www.marvell.com> |
| */ |
| |
| #include <dm.h> |
| #include <pci.h> |
| #include <pci_ids.h> |
| #include <asm/gpio.h> |
| #include <asm/io.h> |
| #include <linux/bitfield.h> |
| #include <linux/compat.h> |
| #include <dt-bindings/gpio/gpio.h> |
| |
| /* Returns the bit value to write or read based on the offset */ |
| #define GPIO_BIT(x) BIT_ULL((x) & 0x3f) |
| |
| #define GPIO_RX_DAT 0x00 |
| #define GPIO_TX_SET 0x08 |
| #define GPIO_TX_CLR 0x10 |
| #define GPIO_CONST 0x90 /* OcteonTX only */ |
| |
| /* Offset to register-set for 2nd GPIOs (> 63), OcteonTX only */ |
| #define GPIO1_OFFSET 0x1400 |
| |
| /* GPIO_CONST register bits */ |
| #define GPIO_CONST_GPIOS_MASK GENMASK_ULL(7, 0) |
| |
| /* GPIO_BIT_CFG register bits */ |
| #define GPIO_BIT_CFG_TX_OE BIT_ULL(0) |
| #define GPIO_BIT_CFG_PIN_XOR BIT_ULL(1) |
| #define GPIO_BIT_CFG_INT_EN BIT_ULL(2) |
| #define GPIO_BIT_CFG_PIN_SEL_MASK GENMASK_ULL(26, 16) |
| |
| enum { |
| PROBE_PCI = 0, /* PCI based probing */ |
| PROBE_DT, /* DT based probing */ |
| }; |
| |
| struct octeon_gpio_data { |
| int probe; |
| u32 reg_offs; |
| u32 gpio_bit_cfg_offs; |
| }; |
| |
| struct octeon_gpio { |
| void __iomem *base; |
| const struct octeon_gpio_data *data; |
| }; |
| |
| /* Returns the offset to the output register based on the offset and value */ |
| static u32 gpio_tx_reg(int offset, int value) |
| { |
| u32 ret; |
| |
| ret = value ? GPIO_TX_SET : GPIO_TX_CLR; |
| if (offset > 63) |
| ret += GPIO1_OFFSET; |
| |
| return ret; |
| } |
| |
| /* Returns the offset to the input data register based on the offset */ |
| static u32 gpio_rx_dat_reg(int offset) |
| { |
| u32 ret; |
| |
| ret = GPIO_RX_DAT; |
| if (offset > 63) |
| ret += GPIO1_OFFSET; |
| |
| return ret; |
| } |
| |
| static int octeon_gpio_dir_input(struct udevice *dev, unsigned int offset) |
| { |
| struct octeon_gpio *gpio = dev_get_priv(dev); |
| |
| debug("%s(%s, %u)\n", __func__, dev->name, offset); |
| clrbits_64(gpio->base + gpio->data->gpio_bit_cfg_offs + 8 * offset, |
| GPIO_BIT_CFG_TX_OE | GPIO_BIT_CFG_PIN_XOR | |
| GPIO_BIT_CFG_INT_EN | GPIO_BIT_CFG_PIN_SEL_MASK); |
| |
| return 0; |
| } |
| |
| static int octeon_gpio_dir_output(struct udevice *dev, unsigned int offset, |
| int value) |
| { |
| struct octeon_gpio *gpio = dev_get_priv(dev); |
| |
| debug("%s(%s, %u, %d)\n", __func__, dev->name, offset, value); |
| writeq(GPIO_BIT(offset), gpio->base + gpio->data->reg_offs + |
| gpio_tx_reg(offset, value)); |
| |
| clrsetbits_64(gpio->base + gpio->data->gpio_bit_cfg_offs + 8 * offset, |
| GPIO_BIT_CFG_PIN_SEL_MASK | GPIO_BIT_CFG_INT_EN, |
| GPIO_BIT_CFG_TX_OE); |
| |
| return 0; |
| } |
| |
| static int octeon_gpio_get_value(struct udevice *dev, unsigned int offset) |
| { |
| struct octeon_gpio *gpio = dev_get_priv(dev); |
| u64 reg = readq(gpio->base + gpio->data->reg_offs + |
| gpio_rx_dat_reg(offset)); |
| |
| debug("%s(%s, %u): value: %d\n", __func__, dev->name, offset, |
| !!(reg & GPIO_BIT(offset))); |
| |
| return !!(reg & GPIO_BIT(offset)); |
| } |
| |
| static int octeon_gpio_set_value(struct udevice *dev, |
| unsigned int offset, int value) |
| { |
| struct octeon_gpio *gpio = dev_get_priv(dev); |
| |
| debug("%s(%s, %u, %d)\n", __func__, dev->name, offset, value); |
| writeq(GPIO_BIT(offset), gpio->base + gpio->data->reg_offs + |
| gpio_tx_reg(offset, value)); |
| |
| return 0; |
| } |
| |
| static int octeon_gpio_get_function(struct udevice *dev, unsigned int offset) |
| { |
| struct octeon_gpio *gpio = dev_get_priv(dev); |
| u64 val = readq(gpio->base + gpio->data->gpio_bit_cfg_offs + |
| 8 * offset); |
| int pin_sel; |
| |
| debug("%s(%s, %u): GPIO_BIT_CFG: 0x%llx\n", __func__, dev->name, |
| offset, val); |
| pin_sel = FIELD_GET(GPIO_BIT_CFG_PIN_SEL_MASK, val); |
| if (pin_sel) |
| return GPIOF_FUNC; |
| else if (val & GPIO_BIT_CFG_TX_OE) |
| return GPIOF_OUTPUT; |
| else |
| return GPIOF_INPUT; |
| } |
| |
| static int octeon_gpio_xlate(struct udevice *dev, struct gpio_desc *desc, |
| struct ofnode_phandle_args *args) |
| { |
| if (args->args_count < 1) |
| return -EINVAL; |
| |
| desc->offset = args->args[0]; |
| desc->flags = 0; |
| if (args->args_count > 1) { |
| if (args->args[1] & GPIO_ACTIVE_LOW) |
| desc->flags |= GPIOD_ACTIVE_LOW; |
| /* In the future add tri-state flag support */ |
| } |
| return 0; |
| } |
| |
| static const struct dm_gpio_ops octeon_gpio_ops = { |
| .direction_input = octeon_gpio_dir_input, |
| .direction_output = octeon_gpio_dir_output, |
| .get_value = octeon_gpio_get_value, |
| .set_value = octeon_gpio_set_value, |
| .get_function = octeon_gpio_get_function, |
| .xlate = octeon_gpio_xlate, |
| }; |
| |
| static int octeon_gpio_probe(struct udevice *dev) |
| { |
| struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); |
| struct octeon_gpio *priv = dev_get_priv(dev); |
| char *end; |
| |
| priv->data = (const struct octeon_gpio_data *)dev_get_driver_data(dev); |
| |
| if (priv->data->probe == PROBE_PCI) { |
| priv->base = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_0, |
| PCI_REGION_MEM); |
| uc_priv->gpio_count = readq(priv->base + |
| priv->data->reg_offs + GPIO_CONST) & |
| GPIO_CONST_GPIOS_MASK; |
| } else { |
| priv->base = dev_remap_addr(dev); |
| uc_priv->gpio_count = ofnode_read_u32_default(dev_ofnode(dev), |
| "nr-gpios", 32); |
| } |
| |
| if (!priv->base) { |
| debug("%s(%s): Could not get base address\n", |
| __func__, dev->name); |
| return -ENODEV; |
| } |
| |
| uc_priv->bank_name = strdup(dev->name); |
| end = strchr(uc_priv->bank_name, '@'); |
| end[0] = 'A' + dev_seq(dev); |
| end[1] = '\0'; |
| |
| debug("%s(%s): base address: %p, pin count: %d\n", |
| __func__, dev->name, priv->base, uc_priv->gpio_count); |
| |
| return 0; |
| } |
| |
| static const struct octeon_gpio_data gpio_octeon_data = { |
| .probe = PROBE_DT, |
| .reg_offs = 0x80, |
| .gpio_bit_cfg_offs = 0x100, |
| }; |
| |
| static const struct octeon_gpio_data gpio_octeontx_data = { |
| .probe = PROBE_PCI, |
| .reg_offs = 0x00, |
| .gpio_bit_cfg_offs = 0x400, |
| }; |
| |
| static const struct udevice_id octeon_gpio_ids[] = { |
| { .compatible = "cavium,thunder-8890-gpio", |
| .data = (ulong)&gpio_octeontx_data }, |
| { .compatible = "cavium,octeon-7890-gpio", |
| .data = (ulong)&gpio_octeon_data }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(octeon_gpio) = { |
| .name = "octeon_gpio", |
| .id = UCLASS_GPIO, |
| .of_match = of_match_ptr(octeon_gpio_ids), |
| .probe = octeon_gpio_probe, |
| .priv_auto = sizeof(struct octeon_gpio), |
| .ops = &octeon_gpio_ops, |
| .flags = DM_FLAG_PRE_RELOC, |
| }; |