Amit Pundir | e6732bb | 2020-09-28 12:43:59 +0530 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2019 The Android Open Source Project |
| 3 | * |
| 4 | * Licensed under the Apache License, Version 2.0 (the "License"); |
| 5 | * you may not use this file except in compliance with the License. |
| 6 | * You may obtain a copy of the License at |
| 7 | * |
| 8 | * http://www.apache.org/licenses/LICENSE-2.0 |
| 9 | * |
| 10 | * Unless required by applicable law or agreed to in writing, software |
| 11 | * distributed under the License is distributed on an "AS IS" BASIS, |
| 12 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| 13 | * See the License for the specific language governing permissions and |
| 14 | * limitations under the License. |
| 15 | */ |
| 16 | |
| 17 | #ifndef _YUKAWA_AUDIO_HW_H_ |
| 18 | #define _YUKAWA_AUDIO_HW_H_ |
| 19 | |
| 20 | #include <hardware/audio.h> |
| 21 | #include <tinyalsa/asoundlib.h> |
| 22 | |
| 23 | #include "fir_filter.h" |
| 24 | |
| 25 | #define CARD_OUT 0 |
| 26 | #define PORT_HDMI 0 |
| 27 | #define PORT_INTERNAL_SPEAKER 1 |
| 28 | #define CARD_IN 0 |
| 29 | #define PORT_BUILTIN_MIC 3 |
| 30 | |
| 31 | #define MIXER_XML_PATH "/vendor/etc/mixer_paths.xml" |
| 32 | /* Minimum granularity - Arbitrary but small value */ |
| 33 | #define CODEC_BASE_FRAME_COUNT 32 |
| 34 | |
| 35 | #define CHANNEL_STEREO 2 |
| 36 | |
| 37 | #ifdef AEC_HAL |
| 38 | #define NUM_AEC_REFERENCE_CHANNELS 1 |
| 39 | #else |
| 40 | /* App AEC uses 2-channel reference */ |
| 41 | #define NUM_AEC_REFERENCE_CHANNELS 2 |
| 42 | #endif /* #ifdef AEC_HAL */ |
| 43 | |
| 44 | #define DEBUG_AEC 0 |
| 45 | |
| 46 | #define PCM_OPEN_RETRIES 100 |
| 47 | #define PCM_OPEN_WAIT_TIME_MS 20 |
| 48 | |
| 49 | /* Capture codec parameters */ |
| 50 | /* Set up a capture period of 32 ms: |
| 51 | * CAPTURE_PERIOD = PERIOD_SIZE / SAMPLE_RATE, so (32e-3) = PERIOD_SIZE / (16e3) |
| 52 | * => PERIOD_SIZE = 512 frames, where each "frame" consists of 1 sample of every channel (here, 2ch) */ |
| 53 | #define CAPTURE_PERIOD_MULTIPLIER 16 |
| 54 | #define CAPTURE_PERIOD_SIZE (CODEC_BASE_FRAME_COUNT * CAPTURE_PERIOD_MULTIPLIER) |
| 55 | #define CAPTURE_PERIOD_COUNT 4 |
| 56 | #define CAPTURE_PERIOD_START_THRESHOLD 0 |
| 57 | #define CAPTURE_CODEC_SAMPLING_RATE 16000 |
| 58 | |
| 59 | /* Playback codec parameters */ |
| 60 | /* number of base blocks in a short period (low latency) */ |
| 61 | #define PLAYBACK_PERIOD_MULTIPLIER 32 /* 21 ms */ |
| 62 | /* number of frames per short period (low latency) */ |
| 63 | #define PLAYBACK_PERIOD_SIZE (CODEC_BASE_FRAME_COUNT * PLAYBACK_PERIOD_MULTIPLIER) |
| 64 | /* number of pseudo periods for low latency playback */ |
| 65 | #define PLAYBACK_PERIOD_COUNT 4 |
| 66 | #define PLAYBACK_PERIOD_START_THRESHOLD 2 |
| 67 | #define PLAYBACK_CODEC_SAMPLING_RATE 48000 |
| 68 | #define MIN_WRITE_SLEEP_US 5000 |
| 69 | |
| 70 | #define SPEAKER_EQ_FILE "/vendor/etc/speaker_eq.fir" |
| 71 | #define SPEAKER_MAX_EQ_LENGTH 512 |
| 72 | |
| 73 | struct alsa_audio_device { |
| 74 | struct audio_hw_device hw_device; |
| 75 | |
| 76 | pthread_mutex_t lock; /* see notes in in_read/out_write on mutex acquisition order */ |
| 77 | struct alsa_stream_in *active_input; |
| 78 | struct alsa_stream_out *active_output; |
| 79 | struct audio_route *audio_route; |
| 80 | struct mixer *mixer; |
| 81 | bool mic_mute; |
| 82 | struct aec_t *aec; |
| 83 | }; |
| 84 | |
| 85 | struct alsa_stream_in { |
| 86 | struct audio_stream_in stream; |
| 87 | |
| 88 | pthread_mutex_t lock; /* see note in in_read() on mutex acquisition order */ |
| 89 | audio_devices_t devices; |
| 90 | struct pcm_config config; |
| 91 | struct pcm *pcm; |
| 92 | bool unavailable; |
| 93 | bool standby; |
| 94 | struct alsa_audio_device *dev; |
| 95 | int read_threshold; |
| 96 | unsigned int frames_read; |
| 97 | uint64_t timestamp_nsec; |
| 98 | audio_source_t source; |
| 99 | }; |
| 100 | |
| 101 | struct alsa_stream_out { |
| 102 | struct audio_stream_out stream; |
| 103 | |
| 104 | pthread_mutex_t lock; /* see note in out_write() on mutex acquisition order */ |
| 105 | audio_devices_t devices; |
| 106 | struct pcm_config config; |
| 107 | struct pcm *pcm; |
| 108 | bool unavailable; |
| 109 | int standby; |
| 110 | struct alsa_audio_device *dev; |
| 111 | int write_threshold; |
| 112 | unsigned int frames_written; |
| 113 | struct timespec timestamp; |
| 114 | fir_filter_t* speaker_eq; |
| 115 | }; |
| 116 | |
| 117 | /* 'bytes' are the number of bytes written to audio FIFO, for which 'timestamp' is valid. |
| 118 | * 'available' is the number of frames available to read (for input) or yet to be played |
| 119 | * (for output) frames in the PCM buffer. |
| 120 | * timestamp and available are updated by pcm_get_htimestamp(), so they use the same |
| 121 | * datatypes as the corresponding arguments to that function. */ |
| 122 | struct aec_info { |
| 123 | struct timespec timestamp; |
| 124 | uint64_t timestamp_usec; |
| 125 | unsigned int available; |
| 126 | size_t bytes; |
| 127 | }; |
| 128 | |
| 129 | #endif /* #ifndef _YUKAWA_AUDIO_HW_H_ */ |