| Running Android on hikey board: |
| |
| # TODO |
| * Download HDMI binaries: |
| |
| * Compiling userspace: |
| $ repo init -u https://android.googlesource.com/platform/manifest -b master & repo sync -j24 |
| $ . ./build/envsetup.sh |
| $ lunch hikey-userdebug |
| $ make -j32 |
| |
| Note: For 4 GB eMMC part use: |
| $ make -j32 TARGET_USERDATAIMAGE_4GB=true |
| |
| * Installing initial fastboot and ptable: |
| Select special bootloader mode by linking J15 1-2 and 3-4 pins |
| Connect USB to PC to get ttyUSB device (ex: ttyUSB1) |
| Power the board |
| $ cd device/linaro/hikey/installer |
| $ ./flash-all.sh /dev/ttyUSB1 [4g] |
| Remove link 3-4 and power the board |
| |
| * Flashing images: |
| Enter fastboot mode by linking J15 1-2 and 5-6 pins |
| $ fastboot flash boot out/target/product/hikey/boot_fat.uefi.img |
| $ fastboot flash system out/target/product/hikey/system.img |
| $ fastboot flash cache out/target/product/hikey/cache.img |
| $ fastboot flash userdata out/target/product/hikey/userdata.img |
| Remove jumper 5-6 and power the board |
| |
| * Building kernel |
| $ git clone https://android.googlesource.com/kernel/hikey-linaro |
| $ cd hikey-linaro |
| $ git checkout -b android-hikey-linaro-4.1 origin/android-hikey-linaro-4.1 |
| $ make ARCH=arm64 hikey_defconfig |
| $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-android- -j24 |
| Output: arch/arm64/boot/Image & arch/arm64/boot/dts/hisilicon/hi6220-hikey.dtb |
| copy Image and hi6220-hikey.dtb to hikey-kernel directory |
| |
| * Setting monitor resolution |
| Edit device/linaro/hikey/bootloader/EFI/BOOT/grub.cfg |
| Set video= (for example for 24” monitor): video=HDMI-A-1:1280x800@60 |
| |
| * Kernel serial output (uart3): |
| J2 (LS Expansion): 1 - Gnd, 11 - Rx, 13 - Tx |
| |
| External links: |
| Board: https://www.96boards.org/products/ce/hikey/ |
| Howto: https://github.com/96boards/documentation/wiki/LatestSnapshots |
| Schematics: https://www.96boards.org/wp-content/uploads/2015/02/96Boards-Hikey-Rev-A1.pdf |