| # |
| # Copyright (C) 2011 The Android Open-Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| # Enable updating of APEXes |
| $(call inherit-product, $(SRC_TARGET_DIR)/product/updatable_apex.mk) |
| |
| # Check vendor package version |
| # If you need to make changes to the vendor partition, |
| # please modify the source git project here: |
| # https://staging-git.codelinaro.org/linaro/linaro-aosp/aosp-linaro-vendor-package |
| include $(LOCAL_PATH)/vendor-package-ver.mk |
| ifneq (,$(wildcard $(LINARO_VENDOR_PATH)/hikey960/$(EXPECTED_LINARO_VENDOR_VERSION)/version.mk)) |
| # Unfortunately inherit-product doesn't export build variables from the |
| # called make file to the caller, so we have to include it directly here. |
| include $(LINARO_VENDOR_PATH)/hikey960/$(EXPECTED_LINARO_VENDOR_VERSION)/version.mk |
| ifneq ($(TARGET_LINARO_VENDOR_VERSION), $(EXPECTED_LINARO_VENDOR_VERSION)) |
| $(warning TARGET_LINARO_VENDOR_VERSION ($(TARGET_LINARO_VENDOR_VERSION)) does not match exiting the build ($(EXPECTED_LINARO_VENDOR_VERSION)).) |
| $(warning Please download and extract the new binaries by running the following script:) |
| $(warning ./device/linaro/hikey/fetch-vendor-package.sh ) |
| endif |
| else |
| $(warning Missing Linaro Vendor Package!) |
| $(warning Please download and extract the vendor binaries by running the following script:) |
| $(warning ./device/linaro/hikey/fetch-vendor-package.sh ) |
| endif |
| |
| ifneq (,$(filter $(TARGET_PRODUCT),hikey960_tv hikey_tv)) |
| # Setup TV Build |
| USE_OEM_TV_APP := true |
| $(call inherit-product, device/google/atv/products/atv_base.mk) |
| PRODUCT_CHARACTERISTICS := tv |
| PRODUCT_AAPT_PREF_CONFIG := tvdpi |
| PRODUCT_IS_ATV := true |
| else |
| # Adjust the dalvik heap to be appropriate for a tablet. |
| $(call inherit-product, frameworks/native/build/tablet-10in-xhdpi-2048-dalvik-heap.mk) |
| $(call inherit-product, $(SRC_TARGET_DIR)/product/full_base.mk) |
| endif |
| |
| # Set vendor kernel path |
| PRODUCT_VENDOR_KERNEL_HEADERS := device/linaro/hikey/kernel-headers |
| |
| PRODUCT_SHIPPING_API_LEVEL := 31 |
| PRODUCT_OTA_ENFORCE_VINTF_KERNEL_REQUIREMENTS := false |
| |
| |
| # Enable Scoped Storage related |
| $(call inherit-product, $(SRC_TARGET_DIR)/product/emulated_storage.mk) |
| |
| # Set custom settings |
| DEVICE_PACKAGE_OVERLAYS := device/linaro/hikey/overlay |
| ifneq (,$(filter $(TARGET_PRODUCT),hikey960_tv hikey_tv)) |
| # Set TV Custom Settings |
| DEVICE_PACKAGE_OVERLAYS += device/google/atv/overlay |
| endif |
| |
| #avoid usb crash |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| persist.adb.nonblocking_ffs=0 \ |
| ro.adb.nonblocking_ffs=0 \ |
| |
| |
| #Force navkeys on |
| PRODUCT_PROPERTY_OVERRIDES += qemu.hw.mainkeys=0 |
| |
| # Add openssh support for remote debugging and job submission |
| PRODUCT_PACKAGES += ssh sftp scp sshd ssh-keygen sshd_config start-ssh |
| |
| # Add wifi-related packages |
| PRODUCT_PACKAGES += libwpa_client wpa_supplicant hostapd wificond |
| PRODUCT_PROPERTY_OVERRIDES += wifi.interface=wlan0 \ |
| wifi.supplicant_scan_interval=15 |
| |
| # Build and run only ART |
| PRODUCT_RUNTIMES := runtime_libart_default |
| |
| # Build default bluetooth a2dp and usb audio HALs |
| PRODUCT_PACKAGES += audio.bluetooth.default \ |
| audio.usb.default \ |
| audio.r_submix.default \ |
| tinyplay |
| |
| PRODUCT_PACKAGES += \ |
| android.hardware.audio.service \ |
| android.hardware.audio@7.0-impl \ |
| android.hardware.audio.effect@7.0-impl \ |
| android.hardware.soundtrigger@2.3-impl \ |
| android.hardware.bluetooth.audio@2.0-impl |
| |
| |
| PRODUCT_PACKAGES += vndk_package |
| |
| PRODUCT_PACKAGES += \ |
| android.hardware.drm@1.3-service.clearkey \ |
| android.hardware.drm@1.3-service.widevine \ |
| |
| # Graphics HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.graphics.allocator@2.0-impl \ |
| android.hardware.graphics.allocator@2.0-service \ |
| android.hardware.graphics.composer@2.1-impl \ |
| android.hardware.graphics.composer@2.1-service \ |
| android.hardware.graphics.mapper@2.0-impl-2.1 \ |
| |
| PRODUCT_PACKAGES += android.hardware.bluetooth@1.1-service.btlinux |
| |
| # |
| # Power HAL |
| # |
| PRODUCT_PACKAGES += \ |
| android.hardware.power-service.example |
| |
| # |
| # PowerStats HAL |
| # |
| PRODUCT_PACKAGES += \ |
| android.hardware.power.stats-service.example |
| |
| |
| # Software Gatekeeper HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.gatekeeper@1.0-service.software |
| |
| # Keymaster HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.keymaster@3.0-impl \ |
| android.hardware.keymaster@3.0-service |
| |
| |
| # Sensor HAL |
| ifneq ($(TARGET_SENSOR_MEZZANINE),) |
| TARGET_USES_NANOHUB_SENSORHAL := true |
| NANOHUB_SENSORHAL_LID_STATE_ENABLED := true |
| NANOHUB_SENSORHAL_SENSORLIST := $(LOCAL_PATH)/sensorhal/sensorlist_$(TARGET_SENSOR_MEZZANINE).cpp |
| NANOHUB_SENSORHAL_DIRECT_REPORT_ENABLED := true |
| NANOHUB_SENSORHAL_DYNAMIC_SENSOR_EXT_ENABLED := true |
| |
| PRODUCT_PACKAGES += \ |
| context_hub.default \ |
| android.hardware.sensors@1.0-service \ |
| android.hardware.sensors@1.0-impl \ |
| android.hardware.contexthub@1.0-service \ |
| android.hardware.contexthub@1.0-impl |
| |
| # Nanohub tools |
| PRODUCT_PACKAGES += stm32_flash nanoapp_cmd nanotool |
| |
| PRODUCT_COPY_FILES += \ |
| device/linaro/hikey/init.common.nanohub.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.nanohub.rc |
| |
| # Copy sensors config file(s) |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/data/etc/android.hardware.sensor.accelerometer.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.accelerometer.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.ambient_temperature.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.ambient_temperature.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.barometer.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.barometer.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.compass.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.compass.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.gyroscope.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.gyroscope.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.hifi_sensors.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.hifi_sensors.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.light.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.light.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.relative_humidity.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.relative_humidity.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.stepcounter.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.stepcounter.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.stepdetector.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.stepdetector.xml |
| |
| # Argonkey VL53L0X proximity driver is not available yet. So we are going to copy conf file for neonkey only |
| ifeq ($(TARGET_SENSOR_MEZZANINE),neonkey) |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/data/etc/android.hardware.sensor.proximity.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.proximity.xml |
| endif |
| |
| # VR HAL |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/services/vr/virtual_touchpad/idc/vr-virtual-touchpad-1.idc:$(TARGET_COPY_OUT_VENDOR)/usr/idc/vr-virtual-touchpad-1.idc \ |
| frameworks/native/data/etc/android.hardware.vr.high_performance.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vr.high_performance.xml \ |
| frameworks/native/data/etc/android.hardware.vr.headtracking-0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vr.headtracking.xml |
| |
| PRODUCT_PACKAGES += \ |
| vr.default \ |
| android.hardware.vr@1.0-service \ |
| android.hardware.vr@1.0-impl |
| |
| endif |
| |
| |
| ifneq (,$(filter $(TARGET_PRODUCT),hikey960_tv hikey_tv)) |
| # TV Specific Packages |
| PRODUCT_PACKAGES += \ |
| TvSettings \ |
| LiveTv \ |
| google-tv-pairing-protocol \ |
| TvProvision \ |
| LeanbackSampleApp \ |
| TvSampleLeanbackLauncher \ |
| TvProvider \ |
| SettingsIntelligence \ |
| tv_input.default \ |
| com.android.media.tv.remoteprovider \ |
| InputDevices |
| PRODUCT_PROPERTY_OVERRIDES += ro.sf.lcd_density=260 |
| else |
| |
| # Use Launcher3QuickStep |
| PRODUCT_PACKAGES += Launcher3QuickStep |
| PRODUCT_PROPERTY_OVERRIDES += ro.sf.lcd_density=160 |
| endif |
| |
| # Copy hardware config file(s) |
| PRODUCT_COPY_FILES += \ |
| device/linaro/hikey/etc/permissions/android.hardware.screen.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.screen.xml \ |
| device/linaro/hikey/etc/permissions/android.software.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.xml \ |
| frameworks/native/data/etc/android.software.cts.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.cts.xml \ |
| frameworks/native/data/etc/android.software.app_widgets.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.app_widgets.xml \ |
| frameworks/native/data/etc/android.software.backup.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.backup.xml \ |
| frameworks/native/data/etc/android.software.voice_recognizers.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.voice_recognizers.xml \ |
| frameworks/native/data/etc/android.hardware.ethernet.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.ethernet.xml \ |
| frameworks/native/data/etc/android.hardware.usb.accessory.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.accessory.xml \ |
| frameworks/native/data/etc/android.hardware.usb.host.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.host.xml \ |
| frameworks/native/data/etc/android.software.device_admin.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.device_admin.xml |
| |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/data/etc/android.hardware.wifi.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.xml \ |
| frameworks/native/data/etc/android.hardware.wifi.direct.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.direct.xml \ |
| frameworks/native/data/etc/android.hardware.bluetooth.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.bluetooth.xml \ |
| frameworks/native/data/etc/android.hardware.bluetooth_le.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.bluetooth_le.xml \ |
| device/linaro/hikey/wpa_supplicant.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/wpa_supplicant.conf \ |
| $(LOCAL_PATH)/wpa_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/wpa_supplicant_overlay.conf \ |
| $(LOCAL_PATH)/p2p_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/p2p_supplicant_overlay.conf |
| |
| # audio policy configuration |
| USE_XML_AUDIO_POLICY_CONF := 1 |
| PRODUCT_COPY_FILES += \ |
| device/linaro/hikey/audio/audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_configuration.xml \ |
| device/linaro/hikey/audio/audio_policy_configuration_bluetooth_legacy_hal.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_configuration_bluetooth_legacy_hal.xml \ |
| frameworks/av/services/audiopolicy/config/a2dp_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/a2dp_audio_policy_configuration.xml \ |
| frameworks/av/services/audiopolicy/config/a2dp_in_audio_policy_configuration_7_0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/a2dp_in_audio_policy_configuration_7_0.xml \ |
| frameworks/av/services/audiopolicy/config/bluetooth_audio_policy_configuration_7_0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_audio_policy_configuration_7_0.xml \ |
| frameworks/av/services/audiopolicy/config/r_submix_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/r_submix_audio_policy_configuration.xml \ |
| frameworks/av/services/audiopolicy/config/usb_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/usb_audio_policy_configuration.xml \ |
| frameworks/av/services/audiopolicy/config/default_volume_tables.xml:$(TARGET_COPY_OUT_VENDOR)/etc/default_volume_tables.xml \ |
| frameworks/av/services/audiopolicy/config/audio_policy_volumes.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_volumes.xml |
| |
| # Copy media codecs config file |
| PRODUCT_COPY_FILES += \ |
| device/linaro/hikey/etc/media_codecs.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs.xml \ |
| frameworks/av/media/libstagefright/data/media_codecs_google_audio.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_audio.xml |
| |
| PRODUCT_COPY_FILES += \ |
| device/linaro/hikey/init.common.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.common.rc \ |
| |
| |
| # Health |
| PRODUCT_PACKAGES += \ |
| android.hardware.health@2.1-impl-cuttlefish \ |
| android.hardware.health@2.1-service |
| |
| # TODO: disable this service once we implement system suspend |
| PRODUCT_PACKAGES += \ |
| suspend_blocker |
| |
| TARGET_PRODUCT_PROP := $(LOCAL_PATH)/product.prop |
| BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := device/linaro/hikey/bluetooth |