| /* |
| * Copyright (C) 2010 ARM Limited. All rights reserved. |
| * |
| * Copyright (C) 2008 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <string.h> |
| #include <errno.h> |
| #include <pthread.h> |
| |
| #include <cutils/log.h> |
| #include <cutils/atomic.h> |
| #include <hardware/hardware.h> |
| #include <hardware/gralloc.h> |
| |
| #include <sys/ioctl.h> |
| |
| #include "alloc_device.h" |
| #include "gralloc_priv.h" |
| #include "gralloc_helper.h" |
| #include "framebuffer_device.h" |
| |
| #include "alloc_device_allocator_specific.h" |
| #include "gralloc_buffer_priv.h" |
| |
| #include "mali_gralloc_formats.h" |
| |
| #define AFBC_PIXELS_PER_BLOCK 16 |
| #define AFBC_HEADER_BUFFER_BYTES_PER_BLOCKENTRY 16 |
| |
| #define AFBC_BODY_BUFFER_BYTE_ALIGNMENT 1024 |
| #define AFBC_NORMAL_WIDTH_ALIGN 16 |
| #define AFBC_NORMAL_HEIGHT_ALIGN 16 |
| #define AFBC_WIDEBLK_WIDTH_ALIGN 32 |
| #define AFBC_WIDEBLK_HEIGHT_ALIGN 16 |
| // Regarding Tiled Headers AFBC mode, both header and body buffer should aligned to 4KB |
| // and in non-wide mode (16x16), the width and height should be both rounded up to 128 |
| // in wide mode (32x8) the width should be rounded up to 256, the height should be rounded up to 64 |
| #define AFBC_TILED_HEADERS_BASIC_WIDTH_ALIGN 128 |
| #define AFBC_TILED_HEADERS_BASIC_HEIGHT_ALIGN 128 |
| #define AFBC_TILED_HEADERS_WIDEBLK_WIDTH_ALIGN 256 |
| #define AFBC_TILED_HEADERS_WIDEBLK_HEIGHT_ALIGN 64 |
| |
| // This value is platform specific and should be set according to hardware YUV planes restrictions. |
| // Please note that EGL winsys platform config file needs to use the same value when importing buffers. |
| #define YUV_MALI_PLANE_ALIGN 128 |
| |
| // Default YUV stride aligment in Android |
| #define YUV_ANDROID_PLANE_ALIGN 16 |
| |
| static int gralloc_alloc_framebuffer_locked(alloc_device_t* dev, size_t size, int usage, buffer_handle_t* pHandle, int* stride, int* byte_stride) |
| { |
| private_module_t* m = reinterpret_cast<private_module_t*>(dev->common.module); |
| |
| // allocate the framebuffer |
| if (m->framebuffer == NULL) |
| { |
| // initialize the framebuffer, the framebuffer is mapped once and forever. |
| int err = init_frame_buffer_locked(m); |
| if (err < 0) |
| { |
| return err; |
| } |
| } |
| |
| const uint32_t bufferMask = m->bufferMask; |
| const uint32_t numBuffers = m->numBuffers; |
| /* framebufferSize is used for allocating the handle to the framebuffer and refers |
| * to the size of the actual framebuffer. |
| * alignedFramebufferSize is used for allocating a possible internal buffer and |
| * thus need to consider internal alignment requirements. */ |
| const size_t framebufferSize = m->finfo.line_length * m->info.yres; |
| const size_t alignedFramebufferSize = GRALLOC_ALIGN(m->finfo.line_length, 64) * m->info.yres; |
| |
| *stride = m->info.xres; |
| |
| if (numBuffers == 1) |
| { |
| // If we have only one buffer, we never use page-flipping. Instead, |
| // we return a regular buffer which will be memcpy'ed to the main |
| // screen when post is called. |
| int newUsage = (usage & ~GRALLOC_USAGE_HW_FB) | GRALLOC_USAGE_HW_2D; |
| AWAR( "fallback to single buffering. Virtual Y-res too small %d", m->info.yres ); |
| *byte_stride = GRALLOC_ALIGN(m->finfo.line_length, 64); |
| return alloc_backend_alloc(dev, alignedFramebufferSize, newUsage, pHandle, 0, 0, 0); |
| } |
| |
| if (bufferMask >= ((1LU<<numBuffers)-1)) |
| { |
| // We ran out of buffers. |
| return -ENOMEM; |
| } |
| |
| uintptr_t framebufferVaddr = (uintptr_t)m->framebuffer->base; |
| // find a free slot |
| for (uint32_t i=0 ; i<numBuffers ; i++) |
| { |
| if ((bufferMask & (1LU<<i)) == 0) |
| { |
| m->bufferMask |= (1LU<<i); |
| break; |
| } |
| framebufferVaddr += framebufferSize; |
| } |
| |
| // The entire framebuffer memory is already mapped, now create a buffer object for parts of this memory |
| private_handle_t* hnd = new private_handle_t(private_handle_t::PRIV_FLAGS_FRAMEBUFFER, usage, size, |
| (void*)framebufferVaddr, 0, m->framebuffer->shallow_fbdev_fd, |
| (framebufferVaddr - (uintptr_t)m->framebuffer->base)); |
| |
| /* |
| * Perform allocator specific actions. If these fail we fall back to a regular buffer |
| * which will be memcpy'ed to the main screen when fb_post is called. |
| */ |
| if (alloc_backend_alloc_framebuffer(m, hnd) == -1) |
| { |
| delete hnd; |
| int newUsage = (usage & ~GRALLOC_USAGE_HW_FB) | GRALLOC_USAGE_HW_2D; |
| AERR( "Fallback to single buffering. Unable to map framebuffer memory to handle:%p", hnd ); |
| *byte_stride = GRALLOC_ALIGN(m->finfo.line_length, 64); |
| return alloc_backend_alloc(dev, alignedFramebufferSize, newUsage, pHandle, 0, 0, 0); |
| } |
| |
| *pHandle = hnd; |
| *byte_stride = m->finfo.line_length; |
| |
| return 0; |
| } |
| |
| static int gralloc_alloc_framebuffer(alloc_device_t* dev, size_t size, int usage, buffer_handle_t* pHandle, int* stride, int* byte_stride) |
| { |
| private_module_t* m = reinterpret_cast<private_module_t*>(dev->common.module); |
| pthread_mutex_lock(&m->lock); |
| int err = gralloc_alloc_framebuffer_locked(dev, size, usage, pHandle, stride, byte_stride); |
| pthread_mutex_unlock(&m->lock); |
| return err; |
| } |
| |
| /* |
| * Type of allocation |
| */ |
| enum AllocType |
| { |
| UNCOMPRESSED = 0, |
| AFBC, |
| /* AFBC_WIDEBLK mode requires buffer to have 32 * 16 pixels alignment */ |
| AFBC_WIDEBLK, |
| /* AN AFBC buffer with additional padding to ensure a 64-bte alignment |
| * for each row of blocks in the header */ |
| AFBC_PADDED, |
| /* AFBC_TILED_HEADERS_AFBC_BASIC mode requires buffer to have 128*128 pixels alignment(16x16 superblocks) */ |
| AFBC_TILED_HEADERS_BASIC, |
| /* AFBC_TILED_HEADERS_AFBC_WIDEBLK mode requires buffer to have 256*64 pixels alignment(32x8 superblocks) */ |
| AFBC_TILED_HEADERS_WIDEBLK, |
| }; |
| |
| /* |
| * Computes the strides and size for an RGB buffer |
| * |
| * width width of the buffer in pixels |
| * height height of the buffer in pixels |
| * pixel_size size of one pixel in bytes |
| * |
| * pixel_stride (out) stride of the buffer in pixels |
| * byte_stride (out) stride of the buffer in bytes |
| * size (out) size of the buffer in bytes |
| * type (in) if buffer should be allocated for afbc |
| */ |
| static void get_rgb_stride_and_size(int width, int height, int pixel_size, |
| int* pixel_stride, int* byte_stride, size_t* size, AllocType type) |
| { |
| int stride; |
| |
| stride = width * pixel_size; |
| |
| /* Align the lines to 64 bytes. |
| * It's more efficient to write to 64-byte aligned addresses because it's the burst size on the bus */ |
| stride = GRALLOC_ALIGN(stride, 64); |
| |
| if (size != NULL) |
| { |
| *size = stride * height; |
| } |
| |
| if (byte_stride != NULL) |
| { |
| *byte_stride = stride; |
| } |
| |
| if (pixel_stride != NULL) |
| { |
| *pixel_stride = stride / pixel_size; |
| } |
| |
| if (type != UNCOMPRESSED) |
| { |
| int w_aligned; |
| int h_aligned = GRALLOC_ALIGN( height, AFBC_NORMAL_HEIGHT_ALIGN ); |
| int nblocks; |
| int buffer_byte_alignment = AFBC_BODY_BUFFER_BYTE_ALIGNMENT; |
| |
| if (type == AFBC_TILED_HEADERS_BASIC) |
| { |
| w_aligned = GRALLOC_ALIGN( width, AFBC_TILED_HEADERS_BASIC_WIDTH_ALIGN ); |
| h_aligned = GRALLOC_ALIGN( height, AFBC_TILED_HEADERS_BASIC_HEIGHT_ALIGN ); |
| buffer_byte_alignment = 4 * AFBC_BODY_BUFFER_BYTE_ALIGNMENT; |
| } |
| else if (type == AFBC_TILED_HEADERS_WIDEBLK) |
| { |
| w_aligned = GRALLOC_ALIGN( width, AFBC_TILED_HEADERS_WIDEBLK_WIDTH_ALIGN ); |
| h_aligned = GRALLOC_ALIGN( height, AFBC_TILED_HEADERS_WIDEBLK_HEIGHT_ALIGN ); |
| buffer_byte_alignment = 4 * AFBC_BODY_BUFFER_BYTE_ALIGNMENT; |
| } |
| else if (type == AFBC_PADDED) |
| { |
| w_aligned = GRALLOC_ALIGN( width, 64 ); |
| } |
| else if (type == AFBC_WIDEBLK) |
| { |
| w_aligned = GRALLOC_ALIGN( width, AFBC_WIDEBLK_WIDTH_ALIGN ); |
| h_aligned = GRALLOC_ALIGN( height, AFBC_WIDEBLK_HEIGHT_ALIGN ); |
| } |
| else |
| { |
| w_aligned = GRALLOC_ALIGN( width, AFBC_NORMAL_WIDTH_ALIGN ); |
| } |
| |
| nblocks = w_aligned / AFBC_PIXELS_PER_BLOCK * h_aligned / AFBC_PIXELS_PER_BLOCK; |
| |
| if ( size != NULL ) |
| { |
| *size = w_aligned * h_aligned * pixel_size + |
| GRALLOC_ALIGN( nblocks * AFBC_HEADER_BUFFER_BYTES_PER_BLOCKENTRY, buffer_byte_alignment ); |
| } |
| } |
| } |
| |
| /* |
| * Computes the strides and size for an AFBC 8BIT YUV 4:2:0 buffer |
| * |
| * width Public known width of the buffer in pixels |
| * height Public known height of the buffer in pixels |
| * |
| * pixel_stride (out) stride of the buffer in pixels |
| * byte_stride (out) stride of the buffer in bytes |
| * size (out) size of the buffer in bytes |
| * type if buffer should be allocated for a certain afbc type |
| * internalHeight (out) The internal height, which may be greater than the public known height. |
| */ |
| static bool get_afbc_yuv420_8bit_stride_and_size(int width, int height, int* pixel_stride, int* byte_stride, |
| size_t* size, AllocType type, int *internalHeight) |
| { |
| int yuv420_afbc_luma_stride, yuv420_afbc_chroma_stride; |
| int buffer_byte_alignment = AFBC_BODY_BUFFER_BYTE_ALIGNMENT; |
| |
| *internalHeight = height; |
| |
| #if MALI_VIDEO_VERSION != 0 |
| |
| /* If we have a greater internal height than public we set the internalHeight. This |
| * implies that cropping will be applied of internal dimensions to fit the public one. |
| * |
| * NOTE: This should really only be done when the producer is determined to be VPU decoder. |
| */ |
| *internalHeight += AFBC_PIXELS_PER_BLOCK; |
| #endif |
| |
| /* The actual height used in size calculation must include the possible extra row. But |
| * it must also be AFBC-aligned. Only the extra row-padding should be reported back in |
| * internalHeight. This as only this row needs to be considered when cropping. */ |
| |
| if (type == UNCOMPRESSED) |
| { |
| AERR(" Buffer must be allocated with AFBC mode for internal pixel format YUV420_8BIT_AFBC!"); |
| return false; |
| } |
| else if (type == AFBC_TILED_HEADERS_BASIC) |
| { |
| width = GRALLOC_ALIGN( width, AFBC_TILED_HEADERS_BASIC_WIDTH_ALIGN ); |
| height = GRALLOC_ALIGN( *internalHeight, AFBC_TILED_HEADERS_BASIC_HEIGHT_ALIGN ); |
| buffer_byte_alignment = 4 * AFBC_BODY_BUFFER_BYTE_ALIGNMENT; |
| } |
| else if (type == AFBC_TILED_HEADERS_WIDEBLK) |
| { |
| width = GRALLOC_ALIGN( width, AFBC_TILED_HEADERS_WIDEBLK_WIDTH_ALIGN ); |
| height = GRALLOC_ALIGN( *internalHeight, AFBC_TILED_HEADERS_WIDEBLK_HEIGHT_ALIGN ); |
| buffer_byte_alignment = 4 * AFBC_BODY_BUFFER_BYTE_ALIGNMENT; |
| } |
| else if (type == AFBC_PADDED) |
| { |
| AERR("GRALLOC_USAGE_PRIVATE_2 (64byte header row alignment for AFBC) is not supported for YUV"); |
| return false; |
| } |
| else if (type == AFBC_WIDEBLK) |
| { |
| width = GRALLOC_ALIGN(width, AFBC_WIDEBLK_WIDTH_ALIGN); |
| height = GRALLOC_ALIGN( *internalHeight, AFBC_WIDEBLK_HEIGHT_ALIGN ); |
| } |
| else |
| { |
| width = GRALLOC_ALIGN(width, AFBC_NORMAL_WIDTH_ALIGN); |
| height = GRALLOC_ALIGN( *internalHeight, AFBC_NORMAL_HEIGHT_ALIGN ); |
| } |
| |
| yuv420_afbc_luma_stride = width; |
| yuv420_afbc_chroma_stride = GRALLOC_ALIGN(yuv420_afbc_luma_stride / 2, 16); /* Horizontal downsampling*/ |
| |
| if (size != NULL) |
| { |
| int nblocks = width / AFBC_PIXELS_PER_BLOCK * height / AFBC_PIXELS_PER_BLOCK; |
| /* Simplification of (height * luma-stride + 2 * (height /2 * chroma_stride) */ |
| *size = |
| ( yuv420_afbc_luma_stride + yuv420_afbc_chroma_stride ) * height + |
| GRALLOC_ALIGN( nblocks * AFBC_HEADER_BUFFER_BYTES_PER_BLOCKENTRY, buffer_byte_alignment ); |
| } |
| |
| if (byte_stride != NULL) |
| { |
| *byte_stride = yuv420_afbc_luma_stride; |
| } |
| |
| if (pixel_stride != NULL) |
| { |
| *pixel_stride = yuv420_afbc_luma_stride; |
| } |
| |
| return true; |
| } |
| |
| /* |
| * Computes the strides and size for an YV12 buffer |
| * |
| * width Public known width of the buffer in pixels |
| * height Public known height of the buffer in pixels |
| * |
| * pixel_stride (out) stride of the buffer in pixels |
| * byte_stride (out) stride of the buffer in bytes |
| * size (out) size of the buffer in bytes |
| * type (in) if buffer should be allocated for a certain afbc type |
| * internalHeight (out) The internal height, which may be greater than the public known height. |
| * stride_alignment (in) stride aligment value in bytes. |
| */ |
| static bool get_yv12_stride_and_size(int width, int height, int* pixel_stride, int* byte_stride, size_t* size, |
| AllocType type, int* internalHeight, int stride_alignment) |
| { |
| int luma_stride; |
| |
| if (type != UNCOMPRESSED) |
| { |
| return get_afbc_yuv420_8bit_stride_and_size(width, height, pixel_stride, byte_stride, size, type, internalHeight); |
| } |
| |
| /* 4:2:0 formats must have buffers with even height and width as the clump size is 2x2 pixels. |
| * Width will be even stride aligned anyway so just adjust height here for size calculation. */ |
| height = GRALLOC_ALIGN(height, 2); |
| |
| luma_stride = GRALLOC_ALIGN(width, stride_alignment); |
| |
| if (size != NULL) |
| { |
| int chroma_stride = GRALLOC_ALIGN(luma_stride / 2, stride_alignment); |
| /* Simplification of ((height * luma_stride ) + 2 * ((height / 2) * chroma_stride)). */ |
| *size = height * (luma_stride + chroma_stride); |
| } |
| |
| if (byte_stride != NULL) |
| { |
| *byte_stride = luma_stride; |
| } |
| |
| if (pixel_stride != NULL) |
| { |
| *pixel_stride = luma_stride; |
| } |
| |
| return true; |
| } |
| /* |
| * Computes the strides and size for an 8 bit YUYV 422 buffer |
| * |
| * width Public known width of the buffer in pixels |
| * height Public known height of the buffer in pixels |
| * |
| * pixel_stride (out) stride of the buffer in pixels |
| * byte_stride (out) stride of the buffer in bytes |
| * size (out) size of the buffer in bytes |
| */ |
| static bool get_yuv422_8bit_stride_and_size(int width, int height, int* pixel_stride, int* byte_stride, size_t* size) |
| { |
| int local_byte_stride, local_pixel_stride; |
| |
| /* 4:2:2 formats must have buffers with even width as the clump size is 2x1 pixels. |
| * This is taken care of by the even stride alignment. */ |
| |
| local_pixel_stride = GRALLOC_ALIGN(width, YUV_MALI_PLANE_ALIGN); |
| local_byte_stride = GRALLOC_ALIGN(width * 2, YUV_MALI_PLANE_ALIGN); /* 4 bytes per 2 pixels */ |
| |
| if (size != NULL) |
| { |
| *size = local_byte_stride * height; |
| } |
| |
| if (byte_stride != NULL) |
| { |
| *byte_stride = local_byte_stride; |
| } |
| |
| if (pixel_stride != NULL) |
| { |
| *pixel_stride = local_pixel_stride; |
| } |
| |
| return true; |
| } |
| |
| /* |
| * Computes the strides and size for an AFBC 8BIT YUV 4:2:2 buffer |
| * |
| * width width of the buffer in pixels |
| * height height of the buffer in pixels |
| * |
| * pixel_stride (out) stride of the buffer in pixels |
| * byte_stride (out) stride of the buffer in bytes |
| * size (out) size of the buffer in bytes |
| * type if buffer should be allocated for a certain afbc type |
| */ |
| static bool get_afbc_yuv422_8bit_stride_and_size(int width, int height, int* pixel_stride, int* byte_stride, size_t* size, AllocType type) |
| { |
| int yuv422_afbc_luma_stride; |
| int buffer_byte_alignment = AFBC_BODY_BUFFER_BYTE_ALIGNMENT; |
| |
| if (type == UNCOMPRESSED) |
| { |
| AERR(" Buffer must be allocated with AFBC mode for internal pixel format YUV422_8BIT_AFBC!"); |
| return false; |
| } |
| else if (type == AFBC_TILED_HEADERS_BASIC) |
| { |
| width = GRALLOC_ALIGN(width, AFBC_TILED_HEADERS_BASIC_WIDTH_ALIGN); |
| height = GRALLOC_ALIGN(height, AFBC_TILED_HEADERS_BASIC_HEIGHT_ALIGN); |
| buffer_byte_alignment = 4 * AFBC_BODY_BUFFER_BYTE_ALIGNMENT; |
| } |
| else if (type == AFBC_TILED_HEADERS_WIDEBLK) |
| { |
| width = GRALLOC_ALIGN(width, AFBC_TILED_HEADERS_WIDEBLK_WIDTH_ALIGN); |
| height = GRALLOC_ALIGN(height, AFBC_TILED_HEADERS_WIDEBLK_HEIGHT_ALIGN); |
| buffer_byte_alignment = 4 * AFBC_BODY_BUFFER_BYTE_ALIGNMENT; |
| } |
| else if (type == AFBC_PADDED) |
| { |
| AERR("GRALLOC_USAGE_PRIVATE_2 (64byte header row alignment for AFBC) is not supported for YUV"); |
| return false; |
| } |
| else if (type == AFBC_WIDEBLK) |
| { |
| width = GRALLOC_ALIGN(width, AFBC_WIDEBLK_WIDTH_ALIGN); |
| height = GRALLOC_ALIGN(height, AFBC_WIDEBLK_HEIGHT_ALIGN); |
| } |
| else |
| { |
| width = GRALLOC_ALIGN(width, AFBC_NORMAL_WIDTH_ALIGN); |
| height = GRALLOC_ALIGN(height, AFBC_NORMAL_HEIGHT_ALIGN); |
| } |
| |
| yuv422_afbc_luma_stride = width; |
| |
| if (size != NULL) |
| { |
| int nblocks = width / AFBC_PIXELS_PER_BLOCK * height / AFBC_PIXELS_PER_BLOCK; |
| /* YUV 4:2:2 luma size equals chroma size */ |
| *size = yuv422_afbc_luma_stride * height * 2 |
| + GRALLOC_ALIGN(nblocks * AFBC_HEADER_BUFFER_BYTES_PER_BLOCKENTRY, buffer_byte_alignment); |
| } |
| |
| if (byte_stride != NULL) |
| { |
| *byte_stride = yuv422_afbc_luma_stride; |
| } |
| |
| if (pixel_stride != NULL) |
| { |
| *pixel_stride = yuv422_afbc_luma_stride; |
| } |
| |
| return true; |
| } |
| |
| /* |
| * Calculate strides and sizes for a P010 (Y-UV 4:2:0) or P210 (Y-UV 4:2:2) buffer. |
| * |
| * @param width [in] Buffer width. |
| * @param height [in] Buffer height. |
| * @param vss [in] Vertical sub-sampling factor (2 for P010, 1 for |
| * P210. Anything else is invalid). |
| * @param pixel_stride [out] Pixel stride; number of pixels between |
| * consecutive rows. |
| * @param byte_stride [out] Byte stride; number of bytes between |
| * consecutive rows. |
| * @param size [out] Size of the buffer in bytes. Cumulative sum of |
| * sizes of all planes. |
| * |
| * @return true if the calculation was successful; false otherwise (invalid |
| * parameter) |
| */ |
| static bool get_yuv_pX10_stride_and_size(int width, int height, int vss, int* pixel_stride, int* byte_stride, size_t* size) |
| { |
| int luma_pixel_stride, luma_byte_stride; |
| |
| if (vss < 1 || vss > 2) |
| { |
| AERR("Invalid vertical sub-sampling factor: %d, should be 1 or 2", vss); |
| return false; |
| } |
| |
| /* 4:2:2 must have even width as the clump size is 2x1 pixels. This will be taken care of by the |
| * even stride alignment */ |
| if (vss == 2) |
| { |
| /* 4:2:0 must also have even height as the clump size is 2x2 */ |
| height = GRALLOC_ALIGN(height, 2); |
| } |
| |
| luma_pixel_stride = GRALLOC_ALIGN(width, YUV_MALI_PLANE_ALIGN); |
| luma_byte_stride = GRALLOC_ALIGN(width * 2, YUV_MALI_PLANE_ALIGN); |
| |
| if (size != NULL) |
| { |
| int chroma_size = GRALLOC_ALIGN(width * 2, YUV_MALI_PLANE_ALIGN) * (height / vss); |
| *size = luma_byte_stride * height + chroma_size; |
| } |
| |
| if (byte_stride != NULL) |
| { |
| *byte_stride = luma_byte_stride; |
| } |
| |
| if (pixel_stride != NULL) |
| { |
| *pixel_stride = luma_pixel_stride; |
| } |
| |
| return true; |
| } |
| |
| /* |
| * Calculate strides and strides for Y210 (10 bit YUYV packed, 4:2:2) format buffer. |
| * |
| * @param width [in] Buffer width. |
| * @param height [in] Buffer height. |
| * @param pixel_stride [out] Pixel stride; number of pixels between |
| * consecutive rows. |
| * @param byte_stride [out] Byte stride; number of bytes between |
| * consecutive rows. |
| * @param size [out] Size of the buffer in bytes. Cumulative sum of |
| * sizes of all planes. |
| * |
| * @return true if the calculation was successful; false otherwise (invalid |
| * parameter) |
| */ |
| static bool get_yuv_y210_stride_and_size(int width, int height, int* pixel_stride, int* byte_stride, size_t* size) |
| { |
| int y210_byte_stride, y210_pixel_stride; |
| |
| /* 4:2:2 formats must have buffers with even width as the clump size is 2x1 pixels. |
| * This is taken care of by the even stride alignment */ |
| |
| y210_pixel_stride = GRALLOC_ALIGN(width, YUV_MALI_PLANE_ALIGN); |
| /* 4x16 bits per 2 pixels */ |
| y210_byte_stride = GRALLOC_ALIGN(width * 4, YUV_MALI_PLANE_ALIGN); |
| |
| if (size != NULL) |
| { |
| *size = y210_byte_stride * height; |
| } |
| |
| if (byte_stride != NULL) |
| { |
| *byte_stride = y210_byte_stride; |
| } |
| |
| if (pixel_stride != NULL) |
| { |
| *pixel_stride = y210_pixel_stride; |
| } |
| |
| return true; |
| } |
| |
| /* |
| * Calculate strides and strides for Y0L2 (YUYAAYVYAA, 4:2:0) format buffer. |
| * |
| * @param width [in] Buffer width. |
| * @param height [in] Buffer height. |
| * @param pixel_stride [out] Pixel stride; number of pixels between |
| * consecutive rows. |
| * @param byte_stride [out] Byte stride; number of bytes between |
| * consecutive rows. |
| * @param size [out] Size of the buffer in bytes. Cumulative sum of |
| * sizes of all planes. |
| * |
| * @return true if the calculation was successful; false otherwise (invalid |
| * parameter) |
| * |
| * @note Each YUYAAYVYAA clump encodes a 2x2 area of pixels. YU&V are 10 bits. A is 1 bit. total 8 bytes |
| * |
| */ |
| static bool get_yuv_y0l2_stride_and_size(int width, int height, int* pixel_stride, int* byte_stride, size_t* size) |
| { |
| int y0l2_byte_stride, y0l2_pixel_stride; |
| |
| /* 4:2:0 formats must have buffers with even height and width as the clump size is 2x2 pixels. |
| * Width is take care of by the even stride alignment so just adjust height here for size calculation. */ |
| height = GRALLOC_ALIGN(height, 2); |
| |
| y0l2_pixel_stride = GRALLOC_ALIGN(width, YUV_MALI_PLANE_ALIGN); |
| y0l2_byte_stride = GRALLOC_ALIGN(width * 4, YUV_MALI_PLANE_ALIGN); /* 2 horiz pixels per 8 byte clump */ |
| |
| if (size != NULL) |
| { |
| *size = y0l2_byte_stride * height / 2; /* byte stride covers 2 vert pixels */ |
| } |
| |
| if (byte_stride != NULL) |
| { |
| *byte_stride = y0l2_byte_stride; |
| } |
| |
| if (pixel_stride != NULL) |
| { |
| *pixel_stride = y0l2_pixel_stride; |
| } |
| return true; |
| } |
| /* |
| * Calculate strides and strides for Y410 (AVYU packed, 4:4:4) format buffer. |
| * |
| * @param width [in] Buffer width. |
| * @param height [in] Buffer height. |
| * @param pixel_stride [out] Pixel stride; number of pixels between |
| * consecutive rows. |
| * @param byte_stride [out] Byte stride; number of bytes between |
| * consecutive rows. |
| * @param size [out] Size of the buffer in bytes. Cumulative sum of |
| * sizes of all planes. |
| * |
| * @return true if the calculation was successful; false otherwise (invalid |
| * parameter) |
| */ |
| static bool get_yuv_y410_stride_and_size(int width, int height, int* pixel_stride, int* byte_stride, size_t* size) |
| { |
| int y410_byte_stride, y410_pixel_stride; |
| |
| y410_pixel_stride = GRALLOC_ALIGN(width, YUV_MALI_PLANE_ALIGN); |
| y410_byte_stride = GRALLOC_ALIGN(width * 4, YUV_MALI_PLANE_ALIGN); |
| |
| if (size != NULL) |
| { |
| /* 4x8bits per pixel */ |
| *size = y410_byte_stride * height; |
| } |
| |
| if (byte_stride != NULL) |
| { |
| *byte_stride = y410_byte_stride; |
| } |
| |
| if (pixel_stride != NULL) |
| { |
| *pixel_stride = y410_pixel_stride; |
| } |
| return true; |
| } |
| |
| /* |
| * Calculate strides and strides for YUV420_10BIT_AFBC (Compressed, 4:2:0) format buffer. |
| * |
| * @param width [in] Buffer width. |
| * @param height [in] Buffer height. |
| * @param pixel_stride [out] Pixel stride; number of pixels between |
| * consecutive rows. |
| * @param byte_stride [out] Byte stride; number of bytes between |
| * consecutive rows. |
| * @param size [out] Size of the buffer in bytes. Cumulative sum of |
| * sizes of all planes. |
| * @param type [in] afbc mode that buffer should be allocated with. |
| * |
| * @param internalHeight [out] Internal buffer height that used by consumer or producer |
| * |
| * @return true if the calculation was successful; false otherwise (invalid |
| * parameter) |
| */ |
| static bool get_yuv420_10bit_afbc_stride_and_size(int width, int height, int* pixel_stride, int* byte_stride, size_t* size, AllocType type, int* internalHeight) |
| { |
| int yuv420_afbc_byte_stride, yuv420_afbc_pixel_stride; |
| int buffer_byte_alignment = AFBC_BODY_BUFFER_BYTE_ALIGNMENT; |
| |
| if (width & 3) |
| { |
| return false; |
| } |
| |
| *internalHeight = height; |
| #if MALI_VIDEO_VERSION |
| /* If we have a greater internal height than public we set the internalHeight. This |
| * implies that cropping will be applied of internal dimensions to fit the public one. */ |
| *internalHeight += AFBC_PIXELS_PER_BLOCK; |
| #endif |
| /* The actual height used in size calculation must include the possible extra row. But |
| * it must also be AFBC-aligned. Only the extra row-padding should be reported back in |
| * internalHeight. This as only this row needs to be considered when cropping. */ |
| if (type == UNCOMPRESSED) |
| { |
| AERR(" Buffer must be allocated with AFBC mode for internal pixel format YUV420_10BIT_AFBC!"); |
| return false; |
| } |
| else if (type == AFBC_TILED_HEADERS_BASIC) |
| { |
| width = GRALLOC_ALIGN(width, AFBC_TILED_HEADERS_BASIC_WIDTH_ALIGN); |
| height = GRALLOC_ALIGN(*internalHeight/2, AFBC_TILED_HEADERS_BASIC_HEIGHT_ALIGN); |
| buffer_byte_alignment = 4 * AFBC_BODY_BUFFER_BYTE_ALIGNMENT; |
| } |
| else if (type == AFBC_TILED_HEADERS_WIDEBLK) |
| { |
| width = GRALLOC_ALIGN(width, AFBC_TILED_HEADERS_WIDEBLK_WIDTH_ALIGN); |
| height = GRALLOC_ALIGN(*internalHeight/2, AFBC_TILED_HEADERS_WIDEBLK_HEIGHT_ALIGN); |
| buffer_byte_alignment = 4 * AFBC_BODY_BUFFER_BYTE_ALIGNMENT; |
| } |
| else if (type == AFBC_PADDED) |
| { |
| AERR("GRALLOC_USAGE_PRIVATE_2 (64byte header row alignment for AFBC) is not supported for YUV"); |
| return false; |
| } |
| else if (type == AFBC_WIDEBLK) |
| { |
| width = GRALLOC_ALIGN(width, AFBC_WIDEBLK_WIDTH_ALIGN); |
| height = GRALLOC_ALIGN(*internalHeight/2, AFBC_WIDEBLK_HEIGHT_ALIGN); |
| } |
| else |
| { |
| width = GRALLOC_ALIGN(width, AFBC_NORMAL_WIDTH_ALIGN); |
| height = GRALLOC_ALIGN(*internalHeight/2, AFBC_NORMAL_HEIGHT_ALIGN); |
| } |
| |
| yuv420_afbc_pixel_stride = GRALLOC_ALIGN(width, 16); |
| yuv420_afbc_byte_stride = GRALLOC_ALIGN(width * 4, 16); /* 64-bit packed and horizontally downsampled */ |
| |
| if (size != NULL) |
| { |
| int nblocks = width / AFBC_PIXELS_PER_BLOCK * (*internalHeight) / AFBC_PIXELS_PER_BLOCK; |
| *size = yuv420_afbc_byte_stride * height |
| + GRALLOC_ALIGN(nblocks * AFBC_HEADER_BUFFER_BYTES_PER_BLOCKENTRY, buffer_byte_alignment); |
| } |
| |
| if (byte_stride != NULL) |
| { |
| *byte_stride = yuv420_afbc_pixel_stride; |
| } |
| |
| if (pixel_stride != NULL) |
| { |
| *pixel_stride = yuv420_afbc_pixel_stride; |
| } |
| |
| return true; |
| } |
| |
| /* |
| * Calculate strides and strides for YUV422_10BIT_AFBC (Compressed, 4:2:2) format buffer. |
| * |
| * @param width [in] Buffer width. |
| * @param height [in] Buffer height. |
| * @param pixel_stride [out] Pixel stride; number of pixels between |
| * consecutive rows. |
| * @param byte_stride [out] Byte stride; number of bytes between |
| * consecutive rows. |
| * @param size [out] Size of the buffer in bytes. Cumulative sum of |
| * sizes of all planes. |
| * @param type [in] afbc mode that buffer should be allocated with. |
| * |
| * @return true if the calculation was successful; false otherwise (invalid |
| * parameter) |
| */ |
| static bool get_yuv422_10bit_afbc_stride_and_size(int width, int height, int* pixel_stride, int* byte_stride, size_t* size, AllocType type) |
| { |
| int yuv422_afbc_byte_stride, yuv422_afbc_pixel_stride; |
| int buffer_byte_alignment = AFBC_BODY_BUFFER_BYTE_ALIGNMENT; |
| |
| if (width & 3) |
| { |
| return false; |
| } |
| |
| if (type == UNCOMPRESSED) |
| { |
| AERR(" Buffer must be allocated with AFBC mode for internal pixel format YUV422_10BIT_AFBC!"); |
| return false; |
| } |
| else if (type == AFBC_TILED_HEADERS_BASIC) |
| { |
| width = GRALLOC_ALIGN(width, AFBC_TILED_HEADERS_BASIC_WIDTH_ALIGN); |
| height = GRALLOC_ALIGN(height, AFBC_TILED_HEADERS_BASIC_HEIGHT_ALIGN); |
| buffer_byte_alignment = 4 * AFBC_BODY_BUFFER_BYTE_ALIGNMENT; |
| } |
| else if (type == AFBC_TILED_HEADERS_WIDEBLK) |
| { |
| width = GRALLOC_ALIGN(width, AFBC_TILED_HEADERS_WIDEBLK_WIDTH_ALIGN); |
| height = GRALLOC_ALIGN(height, AFBC_TILED_HEADERS_WIDEBLK_HEIGHT_ALIGN); |
| buffer_byte_alignment = 4 * AFBC_BODY_BUFFER_BYTE_ALIGNMENT; |
| } |
| else if (type == AFBC_PADDED) |
| { |
| AERR("GRALLOC_USAGE_PRIVATE_2 (64byte header row alignment for AFBC) is not supported for YUV"); |
| return false; |
| } |
| else if (type == AFBC_WIDEBLK) |
| { |
| width = GRALLOC_ALIGN(width, AFBC_WIDEBLK_WIDTH_ALIGN); |
| height = GRALLOC_ALIGN(height, AFBC_WIDEBLK_HEIGHT_ALIGN); |
| } |
| else |
| { |
| width = GRALLOC_ALIGN(width, AFBC_NORMAL_WIDTH_ALIGN); |
| height = GRALLOC_ALIGN(height, AFBC_NORMAL_HEIGHT_ALIGN); |
| } |
| |
| yuv422_afbc_pixel_stride = GRALLOC_ALIGN(width, 16); |
| yuv422_afbc_byte_stride = GRALLOC_ALIGN(width * 2, 16); |
| |
| if (size != NULL) |
| { |
| int nblocks = width / AFBC_PIXELS_PER_BLOCK * height / AFBC_PIXELS_PER_BLOCK; |
| /* YUV 4:2:2 chroma size equals to luma size */ |
| *size = yuv422_afbc_byte_stride * height * 2 |
| + GRALLOC_ALIGN(nblocks * AFBC_HEADER_BUFFER_BYTES_PER_BLOCKENTRY, buffer_byte_alignment); |
| } |
| |
| if (byte_stride != NULL) |
| { |
| *byte_stride = yuv422_afbc_byte_stride; |
| } |
| |
| if (pixel_stride != NULL) |
| { |
| *pixel_stride = yuv422_afbc_pixel_stride; |
| } |
| |
| return true; |
| } |
| |
| /* |
| * Calculate strides and strides for Camera RAW and Blob formats |
| * |
| * @param w [in] Buffer width. |
| * @param h [in] Buffer height. |
| * @param format [in] Requested HAL format |
| * @param out_stride [out] Pixel stride; number of pixels/bytes between |
| * consecutive rows. Format description calls for |
| * either bytes or pixels. |
| * @param size [out] Size of the buffer in bytes. Cumulative sum of |
| * sizes of all planes. |
| * |
| * @return true if the calculation was successful; false otherwise (invalid |
| * parameter) |
| */ |
| static bool get_camera_formats_stride_and_size(int w, int h, uint64_t format, int *out_stride, size_t *out_size) |
| { |
| int stride, size; |
| |
| switch (format) |
| { |
| case HAL_PIXEL_FORMAT_RAW16: |
| stride = w; /* Format assumes stride in pixels */ |
| stride = GRALLOC_ALIGN(stride, 16); /* Alignment mandated by Android */ |
| size = stride * h * 2; /* 2 bytes per pixel */ |
| break; |
| |
| case HAL_PIXEL_FORMAT_RAW12: |
| if (w % 4 != 0) |
| { |
| ALOGE("ERROR: Width for HAL_PIXEL_FORMAT_RAW12 buffers has to be multiple of 4."); |
| return false; |
| } |
| stride = (w / 2) * 3; /* Stride in bytes; 2 pixels in 3 bytes */ |
| size = stride * h; |
| break; |
| |
| case HAL_PIXEL_FORMAT_RAW10: |
| if (w % 4 != 0) |
| { |
| ALOGE("ERROR: Width for HAL_PIXEL_FORMAT_RAW10 buffers has to be multiple of 4."); |
| return false; |
| } |
| stride = (w / 4) * 5; /* Stride in bytes; 4 pixels in 5 bytes */ |
| size = stride * h; |
| break; |
| |
| case HAL_PIXEL_FORMAT_BLOB: |
| if (h != 1) |
| { |
| ALOGE("ERROR: Height for HAL_PIXEL_FORMAT_BLOB must be 1."); |
| return false; |
| } |
| stride = 0; /* No 'rows', it's effectively a long one dimensional array */ |
| size = w; |
| break; |
| |
| default: |
| return false; |
| |
| } |
| |
| if (out_size != NULL) |
| { |
| *out_size = size; |
| } |
| |
| if (out_stride != NULL) |
| { |
| *out_stride = stride; |
| } |
| |
| return true; |
| } |
| |
| static int alloc_device_alloc(alloc_device_t* dev, int w, int h, int format, int usage, buffer_handle_t* pHandle, int* pStride) |
| { |
| |
| if (!pHandle || !pStride) |
| { |
| return -EINVAL; |
| } |
| |
| size_t size; // Size to be allocated for the buffer |
| int byte_stride; // Stride of the buffer in bytes |
| int pixel_stride; // Stride of the buffer in pixels - as returned in pStride |
| uint64_t internal_format; |
| AllocType type = UNCOMPRESSED; |
| int internalWidth,internalHeight; |
| |
| #if GRALLOC_FB_SWAP_RED_BLUE == 1 |
| /* match the framebuffer format */ |
| if (usage & GRALLOC_USAGE_HW_FB) |
| { |
| #ifdef GRALLOC_16_BITS |
| format = HAL_PIXEL_FORMAT_RGB_565; |
| #else |
| format = HAL_PIXEL_FORMAT_BGRA_8888; |
| #endif |
| } |
| #endif |
| |
| /* Some formats require an internal width and height that may be used by |
| * consumers/producers. |
| */ |
| internalWidth = w; |
| internalHeight = h; |
| |
| internal_format = mali_gralloc_select_format(format, usage, w*h); |
| if(internal_format == 0) |
| { |
| ALOGE("Unrecognized and/or unsupported format(0x%08X) and usage(0x%08X).",format,usage); |
| return -EINVAL; |
| } |
| |
| if (internal_format & MALI_GRALLOC_INTFMT_AFBCENABLE_MASK) |
| { |
| if (internal_format & MALI_GRALLOC_INTFMT_AFBC_TILED_HEADERS) |
| { |
| if (internal_format & MALI_GRALLOC_INTFMT_AFBC_WIDEBLK) |
| { |
| type = AFBC_TILED_HEADERS_WIDEBLK; |
| } |
| else if (internal_format & MALI_GRALLOC_INTFMT_AFBC_BASIC) |
| { |
| type = AFBC_TILED_HEADERS_BASIC; |
| } |
| else if (internal_format & MALI_GRALLOC_INTFMT_AFBC_SPLITBLK) |
| { |
| ALOGE("Unsupported format. Splitblk in tiled header configuration."); |
| return -EINVAL; |
| } |
| } |
| else if (usage & MALI_GRALLOC_USAGE_AFBC_PADDING) |
| { |
| type = AFBC_PADDED; |
| } |
| else if (internal_format & MALI_GRALLOC_INTFMT_AFBC_WIDEBLK) |
| { |
| type = AFBC_WIDEBLK; |
| } |
| else |
| { |
| type = AFBC; |
| } |
| } |
| |
| uint64_t base_format = internal_format & MALI_GRALLOC_INTFMT_FMT_MASK; |
| switch (base_format) |
| { |
| case HAL_PIXEL_FORMAT_RGBA_8888: |
| case HAL_PIXEL_FORMAT_RGBX_8888: |
| case HAL_PIXEL_FORMAT_BGRA_8888: |
| get_rgb_stride_and_size(w, h, 4, &pixel_stride, &byte_stride, &size, type ); |
| break; |
| case HAL_PIXEL_FORMAT_RGB_888: |
| get_rgb_stride_and_size(w, h, 3, &pixel_stride, &byte_stride, &size, type ); |
| break; |
| case HAL_PIXEL_FORMAT_RGB_565: |
| get_rgb_stride_and_size(w, h, 2, &pixel_stride, &byte_stride, &size, type ); |
| break; |
| |
| case HAL_PIXEL_FORMAT_YCrCb_420_SP: |
| case MALI_GRALLOC_FORMAT_INTERNAL_YV12: |
| case MALI_GRALLOC_FORMAT_INTERNAL_NV12: |
| case MALI_GRALLOC_FORMAT_INTERNAL_NV21: |
| { |
| /* Mali subsystem prefers higher stride alignment values (128 bytes) for YUV, but software components assume |
| * default of 16. We only need to care about YV12 as it's the only, implicit, HAL YUV format in Android. |
| */ |
| int yv12_align = YUV_MALI_PLANE_ALIGN; |
| if(usage & (GRALLOC_USAGE_SW_READ_MASK | GRALLOC_USAGE_SW_WRITE_MASK)) |
| { |
| yv12_align = YUV_ANDROID_PLANE_ALIGN; |
| } |
| |
| if (!get_yv12_stride_and_size(w, h, &pixel_stride, &byte_stride, &size, type, |
| &internalHeight, yv12_align)) |
| { |
| return -EINVAL; |
| } |
| break; |
| } |
| case HAL_PIXEL_FORMAT_YCbCr_422_I: |
| { |
| /* YUYV 4:2:2 */ |
| if (type != UNCOMPRESSED || !get_yuv422_8bit_stride_and_size(w, h, &pixel_stride, &byte_stride, &size)) |
| { |
| return -EINVAL; |
| } |
| break; |
| } |
| case HAL_PIXEL_FORMAT_RAW16: |
| case HAL_PIXEL_FORMAT_RAW12: |
| case HAL_PIXEL_FORMAT_RAW10: |
| case HAL_PIXEL_FORMAT_BLOB: |
| if (type != UNCOMPRESSED) |
| { |
| return -EINVAL; |
| } |
| get_camera_formats_stride_and_size(w, h, base_format, &pixel_stride, &size); |
| byte_stride = pixel_stride; /* For Raw/Blob formats stride is defined to be either in bytes or pixels per format */ |
| break; |
| |
| case MALI_GRALLOC_FORMAT_INTERNAL_Y0L2: |
| /* YUYAAYUVAA 4:2:0 with and without AFBC */ |
| if (type != UNCOMPRESSED) |
| { |
| if (!get_yuv420_10bit_afbc_stride_and_size(w, h, &pixel_stride, &byte_stride, &size, type, &internalHeight)) |
| { |
| return -EINVAL; |
| } |
| } |
| else |
| { |
| if(!get_yuv_y0l2_stride_and_size(w, h, &pixel_stride, &byte_stride, &size)) |
| { |
| return -EINVAL; |
| } |
| } |
| break; |
| |
| case MALI_GRALLOC_FORMAT_INTERNAL_P010: |
| /* Y-UV 4:2:0 */ |
| if (type != UNCOMPRESSED || !get_yuv_pX10_stride_and_size(w, h, 2, &pixel_stride, &byte_stride, &size)) |
| { |
| return -EINVAL; |
| } |
| break; |
| |
| case MALI_GRALLOC_FORMAT_INTERNAL_P210: |
| /* Y-UV 4:2:2 */ |
| if (type != UNCOMPRESSED || !get_yuv_pX10_stride_and_size(w, h, 1, &pixel_stride, &byte_stride, &size)) |
| { |
| return -EINVAL; |
| } |
| break; |
| |
| case MALI_GRALLOC_FORMAT_INTERNAL_Y210: |
| /* YUYV 4:2:2 with and without AFBC */ |
| if (type != UNCOMPRESSED) |
| { |
| if (!get_yuv422_10bit_afbc_stride_and_size(w, h, &pixel_stride, &byte_stride, &size, type)) |
| { |
| return -EINVAL; |
| } |
| } |
| else |
| { |
| if(!get_yuv_y210_stride_and_size(w, h, &pixel_stride, &byte_stride, &size)) |
| { |
| return -EINVAL; |
| } |
| } |
| break; |
| |
| case MALI_GRALLOC_FORMAT_INTERNAL_Y410: |
| /* AVYU 2-10-10-10 */ |
| if (type != UNCOMPRESSED || !get_yuv_y410_stride_and_size(w, h, &pixel_stride, &byte_stride, &size)) |
| { |
| return -EINVAL; |
| } |
| break; |
| |
| case MALI_GRALLOC_FORMAT_INTERNAL_YUV422_8BIT: |
| /* 8BIT AFBC YUV4:2:2 testing usage */ |
| |
| /* We only support compressed for this format right now. |
| * Below will fail in case format is uncompressed. |
| */ |
| if (!get_afbc_yuv422_8bit_stride_and_size(w, h, &pixel_stride, &byte_stride, &size, type)) |
| { |
| return -EINVAL; |
| } |
| break; |
| /* |
| * Additional custom formats can be added here |
| * and must fill the variables pixel_stride, byte_stride and size. |
| */ |
| default: |
| return -EINVAL; |
| } |
| |
| int err; |
| #if DISABLE_FRAMEBUFFER_HAL != 1 |
| if (usage & GRALLOC_USAGE_HW_FB) |
| { |
| err = gralloc_alloc_framebuffer(dev, size, usage, pHandle, &pixel_stride, &byte_stride); |
| } |
| else |
| #endif |
| { |
| err = alloc_backend_alloc(dev, size, usage, pHandle, internal_format, w, h); |
| } |
| |
| if (err < 0) |
| { |
| return err; |
| } |
| |
| private_handle_t *hnd = (private_handle_t *)*pHandle; |
| |
| err = gralloc_buffer_attr_allocate( hnd ); |
| if( err < 0 ) |
| { |
| private_module_t* m = reinterpret_cast<private_module_t*>(dev->common.module); |
| |
| if ( (usage & GRALLOC_USAGE_HW_FB) ) |
| { |
| /* |
| * Having the attribute region is not critical for the framebuffer so let it pass. |
| */ |
| err = 0; |
| } |
| else |
| { |
| alloc_backend_alloc_free( hnd, m ); |
| return err; |
| } |
| } |
| |
| hnd->req_format = format; |
| hnd->byte_stride = byte_stride; |
| hnd->internal_format = internal_format; |
| |
| int private_usage = usage & MALI_GRALLOC_USAGE_YUV_CONF_MASK; |
| |
| switch (private_usage) |
| { |
| case MALI_GRALLOC_USAGE_YUV_CONF_0: |
| hnd->yuv_info = MALI_YUV_BT601_NARROW; |
| break; |
| case MALI_GRALLOC_USAGE_YUV_CONF_1: |
| hnd->yuv_info = MALI_YUV_BT601_WIDE; |
| break; |
| case MALI_GRALLOC_USAGE_YUV_CONF_2: |
| hnd->yuv_info = MALI_YUV_BT709_NARROW; |
| break; |
| case MALI_GRALLOC_USAGE_YUV_CONF_3: |
| hnd->yuv_info = MALI_YUV_BT709_WIDE; |
| break; |
| } |
| |
| /* Workaround 10bit YUV only support BT709_WIDE in GPU DDK */ |
| if ((hnd->internal_format & MALI_GRALLOC_INTFMT_FMT_MASK) == MALI_GRALLOC_FORMAT_INTERNAL_Y0L2) |
| { |
| hnd->yuv_info = MALI_YUV_BT709_WIDE; |
| } |
| hnd->width = w; |
| hnd->height = h; |
| hnd->stride = pixel_stride; |
| hnd->internalWidth = internalWidth; |
| hnd->internalHeight = internalHeight; |
| |
| *pStride = pixel_stride; |
| return 0; |
| } |
| |
| static int alloc_device_free(alloc_device_t* dev, buffer_handle_t handle) |
| { |
| if (private_handle_t::validate(handle) < 0) |
| { |
| return -EINVAL; |
| } |
| |
| private_handle_t const* hnd = reinterpret_cast<private_handle_t const*>(handle); |
| private_module_t* m = reinterpret_cast<private_module_t*>(dev->common.module); |
| |
| if (hnd->flags & private_handle_t::PRIV_FLAGS_FRAMEBUFFER) |
| { |
| // free this buffer |
| private_module_t* m = reinterpret_cast<private_module_t*>(dev->common.module); |
| const size_t bufferSize = m->finfo.line_length * m->info.yres; |
| int index = ((uintptr_t)hnd->base - (uintptr_t)m->framebuffer->base) / bufferSize; |
| m->bufferMask &= ~(1 << index); |
| } |
| |
| gralloc_buffer_attr_free( (private_handle_t *) hnd ); |
| alloc_backend_alloc_free(hnd, m); |
| |
| delete hnd; |
| |
| return 0; |
| } |
| |
| int alloc_device_open(hw_module_t const* module, const char* name, hw_device_t** device) |
| { |
| alloc_device_t *dev; |
| |
| GRALLOC_UNUSED(name); |
| |
| dev = new alloc_device_t; |
| if (NULL == dev) |
| { |
| return -1; |
| } |
| |
| /* initialize our state here */ |
| memset(dev, 0, sizeof(*dev)); |
| |
| /* initialize the procs */ |
| dev->common.tag = HARDWARE_DEVICE_TAG; |
| dev->common.version = 0; |
| dev->common.module = const_cast<hw_module_t*>(module); |
| dev->common.close = alloc_backend_close; |
| dev->alloc = alloc_device_alloc; |
| dev->free = alloc_device_free; |
| |
| if (0 != alloc_backend_open(dev)) { |
| delete dev; |
| return -1; |
| } |
| |
| *device = &dev->common; |
| |
| return 0; |
| } |