| ============================================== | |
| = ARM RealView Emulation Board Documentation = | |
| ============================================== | |
| Howto build UEFI RealView EB for RealTime System Model | |
| ------------------------------------------------------ | |
| For Linux | |
| --------- | |
| 1. Get EDK2 from Tianocore Subversion repository | |
| svn co https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2 edk2 --username guest | |
| 2. Get FatPkg from EDK2 SVN repository: | |
| cd edk2 | |
| svn co https://edk2-fatdriver2.svn.sourceforge.net/svnroot/edk2-fatdriver2/trunk/FatPkg FatPkg --username guest | |
| 3. Set up the environment. And build the EDK2s tools | |
| export EDK_TOOLS_PATH=`pwd`/BaseTools | |
| . edksetup.sh `pwd`/BaseTools/ | |
| make -C $EDK_TOOLS_PATH | |
| 4. Build the ARM RealView EB UEFI Firmware | |
| build -a ARM -p ArmPlatformPkg/ArmRealViewEBPkg/ArmRealViewEb-RTSM-A8.dsc -t RVCTLINUX | |
| Howto test UEFI RealView EB on RealTime System Model - Example Cortex A8 | |
| ------------------------------------------------------------------------ | |
| 1. Build 'ArmRealViewEb-RTSM-A8.dsc' | |
| 2. To Run ArmRealViewEbPkg on the RTSM | |
| 1. Start RealView Debugger | |
| 2. Target > "Connect to Target" | |
| 3. Add RTSM | |
| 4. Configure this new RTSM. | |
| 5. Choose CortexA8 | |
| 6. Setup the 'fname' of baseboard.flashldr_0 with your FD file (eg: c:\dev\edk2\Build\ArmRealViewEb-RTSM-A8\DEBUG_RVCT\FV\ARMREALVIEWEB_EFI.fd) | |
| 7. Turn use_s8 to TRUE in baseboard.sp810_sysctrl | |
| 8. Turn uart_enable to TRUE in baseboard.uart_0 | |
| 4. Connect a telnet client to the port 5000 of your localhost | |
| 5. Launch the program |