| @REM @file | |
| @REM This stand-alone program is typically called by the edksetup.bat file, | |
| @REM however it may be executed directly from the BaseTools project folder | |
| @REM if the file is not executed within a WORKSPACE\BaseTools folder. | |
| @REM | |
| @REM Copyright (c) 2006 - 2013, Intel Corporation. All rights reserved.<BR> | |
| @REM | |
| @REM This program and the accompanying materials are licensed and made available | |
| @REM under the terms and conditions of the BSD License which accompanies this | |
| @REM distribution. The full text of the license may be found at: | |
| @REM http://opensource.org/licenses/bsd-license.php | |
| @REM | |
| @REM THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
| @REM WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR | |
| @REM IMPLIED. | |
| @REM | |
| @echo off | |
| pushd . | |
| @REM ############################################################## | |
| @REM # You should not have to modify anything below this line | |
| @REM # | |
| if /I "%1"=="-h" goto Usage | |
| if /I "%1"=="-help" goto Usage | |
| if /I "%1"=="--help" goto Usage | |
| if /I "%1"=="/h" goto Usage | |
| if /I "%1"=="/help" goto Usage | |
| if /I "%1"=="/?" goto Usage | |
| :loop | |
| if "%1"=="" goto setup_workspace | |
| if /I "%1"=="--nt32" ( | |
| @REM Ignore --nt32 flag | |
| shift | |
| goto loop | |
| ) | |
| if /I "%1"=="Reconfig" ( | |
| shift | |
| set RECONFIG=TRUE | |
| goto loop | |
| ) | |
| if /I "%1"=="Rebuild" ( | |
| shift | |
| set REBUILD=TRUE | |
| goto loop | |
| ) | |
| if /I "%1"=="ForceRebuild" ( | |
| shift | |
| set FORCE_REBUILD=TRUE | |
| goto loop | |
| ) | |
| if "%1"=="" goto setup_workspace | |
| if exist %1 ( | |
| if not defined BASE_TOOLS_PATH ( | |
| if exist %1\Source set BASE_TOOLS_PATH=%1 | |
| shift | |
| goto loop | |
| ) | |
| if not defined EDK_TOOLS_PATH ( | |
| if exist %1\Bin\Win32 set EDK_TOOLS_PATH=%1 | |
| shift | |
| goto loop | |
| ) | |
| echo. | |
| echo !!! ERROR !!! Unknown argument, %1 !!! | |
| echo. | |
| goto end | |
| ) else ( | |
| echo. | |
| echo !!! ERROR !!! Unknown argument, %1 !!! | |
| echo. | |
| goto end | |
| ) | |
| goto loop | |
| @REM | |
| @REM Check the required system environment variables | |
| @REM | |
| :setup_workspace | |
| REM | |
| REM check the EDK_TOOLS_PATH | |
| REM | |
| if not defined EDK_TOOLS_PATH goto no_EDK_TOOLS_PATH | |
| if exist %EDK_TOOLS_PATH% goto set_PATH | |
| :no_EDK_TOOLS_PATH | |
| if not defined WORKSPACE ( | |
| if defined BASE_TOOLS_PATH ( | |
| set EDK_TOOLS_PATH=%BASE_TOOLS_PATH% | |
| goto set_PATH | |
| ) else ( | |
| echo. | |
| echo !!! ERROR !!! Neither BASE_TOOLS_PATH nor EDK_TOOLS_PATH are set. !!! | |
| echo. | |
| goto end | |
| ) | |
| ) else ( | |
| if exist %WORKSPACE%\BaseTools\Bin ( | |
| set EDK_TOOLS_PATH=%WORKSPACE%\BaseTools | |
| goto set_PATH | |
| ) else ( | |
| echo. | |
| echo !!! ERROR !!! No tools path available. Please set EDK_TOOLS_PATH !!! | |
| echo. | |
| goto end | |
| ) | |
| ) | |
| :set_PATH | |
| if defined WORKSPACE_TOOLS_PATH goto check_PATH | |
| set PATH=%EDK_TOOLS_PATH%\Bin;%EDK_TOOLS_PATH%\Bin\Win32;%PATH% | |
| set WORKSPACE_TOOLS_PATH=%EDK_TOOLS_PATH% | |
| goto PATH_ok | |
| :check_PATH | |
| if "%EDK_TOOLS_PATH%"=="%WORKSPACE_TOOLS_PATH%" goto PATH_ok | |
| set PATH=%EDK_TOOLS_PATH%\Bin;%EDK_TOOLS_PATH%\Bin\Win32;%PATH% | |
| set WORKSPACE_TOOLS_PATH=%EDK_TOOLS_PATH% | |
| echo Resetting the PATH variable to include the EDK_TOOLS_PATH for this session. | |
| :PATH_ok | |
| echo PATH = %PATH% | |
| echo. | |
| if defined WORKSPACE ( | |
| echo WORKSPACE = %WORKSPACE% | |
| ) | |
| echo EDK_TOOLS_PATH = %EDK_TOOLS_PATH% | |
| if defined BASE_TOOLS_PATH ( | |
| echo BASE_TOOLS_PATH = %BASE_TOOLS_PATH% | |
| ) | |
| echo. | |
| REM | |
| REM copy *.template to %WORKSPACE%\Conf | |
| REM | |
| if not defined WORKSPACE ( | |
| if defined RECONFIG ( | |
| echo. | |
| echo !!! WARNING !!! WORKSPACE environment variable was not set, cannot Reconfig !!! | |
| echo. | |
| ) | |
| goto skip_reconfig | |
| ) | |
| if NOT exist %WORKSPACE%\Conf ( | |
| mkdir %WORKSPACE%\Conf | |
| ) else ( | |
| if defined RECONFIG ( | |
| echo. | |
| echo Over-writing the files in the WORKSPACE\Conf directory | |
| echo using the default template files | |
| echo. | |
| ) | |
| ) | |
| if NOT exist %WORKSPACE%\Conf\target.txt ( | |
| echo copying ... target.template to %WORKSPACE%\Conf\target.txt | |
| if NOT exist %EDK_TOOLS_PATH%\Conf\target.template ( | |
| echo Error: target.template is missing at folder %EDK_TOOLS_PATH%\Conf\ | |
| ) | |
| copy %EDK_TOOLS_PATH%\Conf\target.template %WORKSPACE%\Conf\target.txt > nul | |
| ) else ( | |
| if defined RECONFIG echo over-write ... target.template to %WORKSPACE%\Conf\target.txt | |
| if defined RECONFIG copy /Y %EDK_TOOLS_PATH%\Conf\target.template %WORKSPACE%\Conf\target.txt > nul | |
| ) | |
| if NOT exist %WORKSPACE%\Conf\tools_def.txt ( | |
| echo copying ... tools_def.template to %WORKSPACE%\Conf\tools_def.txt | |
| if NOT exist %EDK_TOOLS_PATH%\Conf\tools_def.template ( | |
| echo Error: tools_def.template is missing at folder %EDK_TOOLS_PATH%\Conf\ | |
| ) | |
| copy %EDK_TOOLS_PATH%\Conf\tools_def.template %WORKSPACE%\Conf\tools_def.txt > nul | |
| ) else ( | |
| if defined RECONFIG echo over-write ... tools_def.template to %WORKSPACE%\Conf\tools_def.txt | |
| if defined RECONFIG copy /Y %EDK_TOOLS_PATH%\Conf\tools_def.template %WORKSPACE%\Conf\tools_def.txt > nul | |
| ) | |
| if NOT exist %WORKSPACE%\Conf\build_rule.txt ( | |
| echo copying ... build_rule.template to %WORKSPACE%\Conf\build_rule.txt | |
| if NOT exist %EDK_TOOLS_PATH%\Conf\build_rule.template ( | |
| echo Error: build_rule.template is missing at folder %EDK_TOOLS_PATH%\Conf\ | |
| ) | |
| copy %EDK_TOOLS_PATH%\Conf\build_rule.template %WORKSPACE%\Conf\build_rule.txt > nul | |
| ) else ( | |
| if defined RECONFIG echo over-write ... build_rule.template to %WORKSPACE%\Conf\build_rule.txt | |
| if defined RECONFIG copy /Y %EDK_TOOLS_PATH%\Conf\build_rule.template %WORKSPACE%\Conf\build_rule.txt > nul | |
| ) | |
| :skip_reconfig | |
| @REM | |
| @REM Test if we are going to have to do a build | |
| @REM | |
| if defined FORCE_REBUILD goto check_build_environment | |
| if defined REBUILD goto check_build_environment | |
| if not exist "%EDK_TOOLS_PATH%\Bin" goto check_build_environment | |
| IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\BootSectImage.exe" goto check_build_environment | |
| IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\build.exe" goto check_build_environment | |
| IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\EfiLdrImage.exe" goto check_build_environment | |
| IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\EfiRom.exe" goto check_build_environment | |
| IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\GenBootSector.exe" goto check_build_environment | |
| IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\GenFds.exe" goto check_build_environment | |
| IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\GenFfs.exe" goto check_build_environment | |
| IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\GenFv.exe" goto check_build_environment | |
| IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\GenFw.exe" goto check_build_environment | |
| IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\GenPage.exe" goto check_build_environment | |
| IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\GenSec.exe" goto check_build_environment | |
| IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\GenVtf.exe" goto check_build_environment | |
| IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\MigrationMsa2Inf.exe" goto check_build_environment | |
| IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\Split.exe" goto check_build_environment | |
| IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\TargetTool.exe" goto check_build_environment | |
| IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\TianoCompress.exe" goto check_build_environment | |
| IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\Trim.exe" goto check_build_environment | |
| IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\VfrCompile.exe" goto check_build_environment | |
| IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\Fpd2Dsc.exe" goto check_build_environment | |
| IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\VolInfo.exe" goto check_build_environment | |
| goto end | |
| :check_build_environment | |
| if not defined FORCE_REBUILD ( | |
| echo. | |
| echo Rebuilding of tools is not required. Binaries of the latest, | |
| echo tested versions of the tools have been tested and included in the | |
| echo EDK II repository. | |
| echo. | |
| echo If you really want to build the tools, use the ForceRebuild option. | |
| echo. | |
| goto end | |
| ) | |
| if not defined BASE_TOOLS_PATH ( | |
| if not exist "Source\C\Makefile" ( | |
| if not exist "%EDK_TOOLS_PATH%\Source\C\Makefile" goto no_source_files | |
| set BASE_TOOLS_PATH=%EDK_TOOLS_PATH% | |
| ) else ( | |
| set BASE_TOOLS_PATH=%CD% | |
| ) | |
| ) | |
| set PATH=%BASE_TOOLS_PATH%\Bin\Win32;%PATH% | |
| set BASETOOLS_PYTHON_SOURCE=%BASE_TOOLS_PATH%\Source\Python | |
| set PYTHONPATH=%BASETOOLS_PYTHON_SOURCE%;%PYTHONPATH% | |
| if not defined PYTHON_HOME ( | |
| if defined PYTHONHOME ( | |
| set PYTHON_HOME=%PYTHONHOME% | |
| ) else ( | |
| echo. | |
| echo !!! ERROR !!! PYTHON_HOME is required to build or execute the tools, please set it. !!! | |
| echo. | |
| goto end | |
| ) | |
| ) | |
| @REM We have Python, now test for FreezePython application | |
| if not defined PYTHON_FREEZER_PATH ( | |
| @REM see if we can find FreezePython.ex | |
| if exist "%PYTHON_HOME%\Tools\cx_Freeze-3.0.3\FreezePython.exe" ( | |
| set PYTHON_FREEZER_PATH=%PYTHON_HOME%\Tools\cx_Freeze-3.0.3 | |
| ) | |
| if exist "%PYTHON_HOME%\Tools\cx_Freeze\FreezePython.exe" ( | |
| set PYTHON_FREEZER_PATH=%PYTHON_HOME%\Tools\cx_Freeze | |
| ) | |
| if exist "C:\cx_Freeze\FreezePython.exe" ( | |
| set PYTHON_FREEZER_PATH=C:\cx_Freeze | |
| ) | |
| if exist "C:\cx_Freeze-3.0.3" ( | |
| set PYTHON_FREEZER_PATH=C:\cx_Freeze-3.0.3 | |
| ) | |
| if not defined PYTHON_FREEZER_PATH ( | |
| echo. | |
| echo !!! WARNING !!! Will not be able to compile Python programs to .exe | |
| echo Will setup environment to run Python scripts directly. | |
| echo. | |
| set PATH=%BASETOOLS_PYTHON_SOURCE%\Trim;%PATH% | |
| set PATH=%BASETOOLS_PYTHON_SOURCE%\GenFds;%PATH% | |
| set PATH=%BASETOOLS_PYTHON_SOURCE%\build;%PATH% | |
| set PATHEXT=%PATHEXT%;.py | |
| ) | |
| ) | |
| echo BASE_TOOLS_PATH = %BASE_TOOLS_PATH% | |
| echo PYTHON_PATH = %PYTHON_PATH% | |
| echo PYTHON_FREEZER_PATH = %PYTHON_FREEZER_PATH% | |
| echo. | |
| call "%EDK_TOOLS_PATH%\get_vsvars.bat" | |
| if not defined VCINSTALLDIR ( | |
| @echo. | |
| @echo !!! ERROR !!!! Cannot find Visual Studio, required to build C tools !!! | |
| @echo. | |
| goto end | |
| ) | |
| :VisualStudioAvailable | |
| if not defined FORCE_REBUILD goto IncrementalBuild | |
| :CleanAndBuild | |
| pushd . | |
| cd %BASE_TOOLS_PATH% | |
| call nmake cleanall | |
| del /f /q %BASE_TOOLS_PATH%\Bin\Win32\*.* | |
| popd | |
| @REM Let CleanAndBuild fall through to IncrementalBuild | |
| :IncrementalBuild | |
| pushd . | |
| cd %BASE_TOOLS_PATH% | |
| call nmake c | |
| popd | |
| if defined PYTHON_FREEZER_PATH ( | |
| echo BUILDING PYTHON TOOLS | |
| pushd . | |
| cd %BASE_TOOLS_PATH% | |
| call nmake python | |
| popd | |
| ) else ( | |
| echo. | |
| echo !!! WARNING !!! Cannot make executable from Python code, executing python scripts instead !!! | |
| echo. | |
| ) | |
| goto end | |
| :no_source_files | |
| echo. | |
| echo !!! ERROR !!! Cannot build BaseTools applications - no source directory located !!! | |
| echo. | |
| goto end | |
| :Usage | |
| @echo. | |
| echo Usage: "%0 [-h | -help | --help | /h | /help | /?] [ Rebuild | ForceRebuild ] [Reconfig] [base_tools_path [edk_tools_path]]" | |
| @echo. | |
| @echo base_tools_path BaseTools project path, BASE_TOOLS_PATH will be set to this path. | |
| @echo edk_tools_path EDK_TOOLS_PATH will be set to this path. | |
| @echo Rebuild If sources are available perform an Incremental build, only | |
| @echo build those updated tools. | |
| @echo ForceRebuild If sources are available, rebuild all tools regardless of | |
| @echo whether they have been updated or not. | |
| @echo Reconfig Reinstall target.txt, tools_def.txt and build_rule.txt. | |
| @echo. | |
| :end | |
| set REBUILD= | |
| set FORCE_REBUILD= | |
| set RECONFIG= | |
| popd | |