| ;------------------------------------------------------------------------------ | |
| ;* | |
| ;* Copyright (c) 2006 - 2011, Intel Corporation. All rights reserved.<BR> | |
| ;* This program and the accompanying materials | |
| ;* are licensed and made available under the terms and conditions of the BSD License | |
| ;* which accompanies this distribution. The full text of the license may be found at | |
| ;* http://opensource.org/licenses/bsd-license.php | |
| ;* | |
| ;* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
| ;* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
| ;* | |
| ;* start32.asm | |
| ;* | |
| ;* Abstract: | |
| ;* | |
| ;------------------------------------------------------------------------------ | |
| .model small | |
| .stack | |
| .486p | |
| .code | |
| FAT_DIRECTORY_ENTRY_SIZE EQU 020h | |
| FAT_DIRECTORY_ENTRY_SHIFT EQU 5 | |
| BLOCK_SIZE EQU 0200h | |
| BLOCK_MASK EQU 01ffh | |
| BLOCK_SHIFT EQU 9 | |
| org 0h | |
| Ia32Jump: | |
| jmp BootSectorEntryPoint ; JMP inst - 3 bytes | |
| nop | |
| OemId db "INTEL " ; OemId - 8 bytes | |
| SectorSize dw 0 ; Sector Size - 2 bytes | |
| SectorsPerCluster db 0 ; Sector Per Cluster - 1 byte | |
| ReservedSectors dw 0 ; Reserved Sectors - 2 bytes | |
| NoFats db 0 ; Number of FATs - 1 byte | |
| RootEntries dw 0 ; Root Entries - 2 bytes | |
| Sectors dw 0 ; Number of Sectors - 2 bytes | |
| Media db 0 ; Media - 1 byte | |
| SectorsPerFat16 dw 0 ; Sectors Per FAT for FAT12/FAT16 - 2 byte | |
| SectorsPerTrack dw 0 ; Sectors Per Track - 2 bytes | |
| Heads dw 0 ; Heads - 2 bytes | |
| HiddenSectors dd 0 ; Hidden Sectors - 4 bytes | |
| LargeSectors dd 0 ; Large Sectors - 4 bytes | |
| ;****************************************************************************** | |
| ; | |
| ;The structure for FAT32 starting at offset 36 of the boot sector. (At this point, | |
| ;the BPB/boot sector for FAT12 and FAT16 differs from the BPB/boot sector for FAT32.) | |
| ; | |
| ;****************************************************************************** | |
| SectorsPerFat32 dd 0 ; Sectors Per FAT for FAT32 - 4 bytes | |
| ExtFlags dw 0 ; Mirror Flag - 2 bytes | |
| FSVersion dw 0 ; File System Version - 2 bytes | |
| RootCluster dd 0 ; 1st Cluster Number of Root Dir - 4 bytes | |
| FSInfo dw 0 ; Sector Number of FSINFO - 2 bytes | |
| BkBootSector dw 0 ; Sector Number of Bk BootSector - 2 bytes | |
| Reserved db 12 dup(0) ; Reserved Field - 12 bytes | |
| PhysicalDrive db 0 ; Physical Drive Number - 1 byte | |
| Reserved1 db 0 ; Reserved Field - 1 byte | |
| Signature db 0 ; Extended Boot Signature - 1 byte | |
| VolId db " " ; Volume Serial Number - 4 bytes | |
| FatLabel db " " ; Volume Label - 11 bytes | |
| FileSystemType db "FAT32 " ; File System Type - 8 bytes | |
| BootSectorEntryPoint: | |
| ASSUME ds:@code | |
| ASSUME ss:@code | |
| ; ds = 1000, es = 2000 + x (size of first cluster >> 4) | |
| ; cx = Start Cluster of EfiLdr | |
| ; dx = Start Cluster of Efivar.bin | |
| ; Re use the BPB data stored in Boot Sector | |
| mov bp,07c00h | |
| push cx | |
| ; Read Efivar.bin | |
| ; 1000:dx = DirectoryEntry of Efivar.bin -> BS.com has filled already | |
| mov ax,01900h | |
| mov es,ax | |
| test dx,dx | |
| jnz CheckVarStoreSize | |
| mov al,1 | |
| NoVarStore: | |
| push es | |
| ; Set the 5th byte start @ 0:19000 to non-zero indicating we should init var store header in DxeIpl | |
| mov byte ptr es:[4],al | |
| jmp SaveVolumeId | |
| CheckVarStoreSize: | |
| mov di,dx | |
| cmp dword ptr ds:[di+2], 04000h | |
| mov al,2 | |
| jne NoVarStore | |
| LoadVarStore: | |
| mov al,0 | |
| mov byte ptr es:[4],al | |
| mov cx,word ptr[di] | |
| ; ES:DI = 1500:0 | |
| xor di,di | |
| push es | |
| mov ax,01500h | |
| mov es,ax | |
| call ReadFile | |
| SaveVolumeId: | |
| pop es | |
| mov ax,word ptr [bp+VolId] | |
| mov word ptr es:[0],ax ; Save Volume Id to 0:19000. we will find the correct volume according to this VolumeId | |
| mov ax,word ptr [bp+VolId+2] | |
| mov word ptr es:[2],ax | |
| ; Read Efildr | |
| pop cx | |
| ; cx = Start Cluster of Efildr -> BS.com has filled already | |
| ; ES:DI = 2000:0, first cluster will be read again | |
| xor di,di ; di = 0 | |
| mov ax,02000h | |
| mov es,ax | |
| call ReadFile | |
| mov ax,cs | |
| mov word ptr cs:[JumpSegment],ax | |
| JumpFarInstruction: | |
| db 0eah | |
| JumpOffset: | |
| dw 0200h | |
| JumpSegment: | |
| dw 2000h | |
| ; **************************************************************************** | |
| ; ReadFile | |
| ; | |
| ; Arguments: | |
| ; CX = Start Cluster of File | |
| ; ES:DI = Buffer to store file content read from disk | |
| ; | |
| ; Return: | |
| ; (ES << 4 + DI) = end of file content Buffer | |
| ; | |
| ; **************************************************************************** | |
| ReadFile: | |
| ; si = NumberOfClusters | |
| ; cx = ClusterNumber | |
| ; dx = CachedFatSectorNumber | |
| ; ds:0000 = CacheFatSectorBuffer | |
| ; es:di = Buffer to load file | |
| ; bx = NextClusterNumber | |
| pusha | |
| mov si,1 ; NumberOfClusters = 1 | |
| push cx ; Push Start Cluster onto stack | |
| mov dx,0fffh ; CachedFatSectorNumber = 0xfff | |
| FatChainLoop: | |
| mov ax,cx ; ax = ClusterNumber | |
| and ax,0fff8h ; ax = ax & 0xfff8 | |
| cmp ax,0fff8h ; See if this is the last cluster | |
| je FoundLastCluster ; Jump if last cluster found | |
| mov ax,cx ; ax = ClusterNumber | |
| shl ax,2 ; FatOffset = ClusterNumber * 4 | |
| push si ; Save si | |
| mov si,ax ; si = FatOffset | |
| shr ax,BLOCK_SHIFT ; ax = FatOffset >> BLOCK_SHIFT | |
| add ax,word ptr [bp+ReservedSectors] ; ax = FatSectorNumber = ReservedSectors + (FatOffset >> BLOCK_OFFSET) | |
| and si,BLOCK_MASK ; si = FatOffset & BLOCK_MASK | |
| cmp ax,dx ; Compare FatSectorNumber to CachedFatSectorNumber | |
| je SkipFatRead | |
| mov bx,2 | |
| push es | |
| push ds | |
| pop es | |
| call ReadBlocks ; Read 2 blocks starting at AX storing at ES:DI | |
| pop es | |
| mov dx,ax ; CachedFatSectorNumber = FatSectorNumber | |
| SkipFatRead: | |
| mov bx,word ptr [si] ; bx = NextClusterNumber | |
| mov ax,cx ; ax = ClusterNumber | |
| pop si ; Restore si | |
| dec bx ; bx = NextClusterNumber - 1 | |
| cmp bx,cx ; See if (NextClusterNumber-1)==ClusterNumber | |
| jne ReadClusters | |
| inc bx ; bx = NextClusterNumber | |
| inc si ; NumberOfClusters++ | |
| mov cx,bx ; ClusterNumber = NextClusterNumber | |
| jmp FatChainLoop | |
| ReadClusters: | |
| inc bx | |
| pop ax ; ax = StartCluster | |
| push bx ; StartCluster = NextClusterNumber | |
| mov cx,bx ; ClusterNumber = NextClusterNumber | |
| sub ax,2 ; ax = StartCluster - 2 | |
| xor bh,bh | |
| mov bl,byte ptr [bp+SectorsPerCluster] ; bx = SectorsPerCluster | |
| mul bx ; ax = (StartCluster - 2) * SectorsPerCluster | |
| add ax, word ptr [bp] ; ax = FirstClusterLBA + (StartCluster-2)*SectorsPerCluster | |
| push ax ; save start sector | |
| mov ax,si ; ax = NumberOfClusters | |
| mul bx ; ax = NumberOfClusters * SectorsPerCluster | |
| mov bx,ax ; bx = Number of Sectors | |
| pop ax ; ax = Start Sector | |
| call ReadBlocks | |
| mov si,1 ; NumberOfClusters = 1 | |
| jmp FatChainLoop | |
| FoundLastCluster: | |
| pop cx | |
| popa | |
| ret | |
| ; **************************************************************************** | |
| ; ReadBlocks - Reads a set of blocks from a block device | |
| ; | |
| ; AX = Start LBA | |
| ; BX = Number of Blocks to Read | |
| ; ES:DI = Buffer to store sectors read from disk | |
| ; **************************************************************************** | |
| ; cx = Blocks | |
| ; bx = NumberOfBlocks | |
| ; si = StartLBA | |
| ReadBlocks: | |
| pusha | |
| add eax,dword ptr [bp+LBAOffsetForBootSector] ; Add LBAOffsetForBootSector to Start LBA | |
| add eax,dword ptr [bp+HiddenSectors] ; Add HiddenSectors to Start LBA | |
| mov esi,eax ; esi = Start LBA | |
| mov cx,bx ; cx = Number of blocks to read | |
| ReadCylinderLoop: | |
| mov bp,07bfch ; bp = 0x7bfc | |
| mov eax,esi ; eax = Start LBA | |
| xor edx,edx ; edx = 0 | |
| movzx ebx,word ptr [bp] ; bx = MaxSector | |
| div ebx ; ax = StartLBA / MaxSector | |
| inc dx ; dx = (StartLBA % MaxSector) + 1 | |
| mov bx,word ptr [bp] ; bx = MaxSector | |
| sub bx,dx ; bx = MaxSector - Sector | |
| inc bx ; bx = MaxSector - Sector + 1 | |
| cmp cx,bx ; Compare (Blocks) to (MaxSector - Sector + 1) | |
| jg LimitTransfer | |
| mov bx,cx ; bx = Blocks | |
| LimitTransfer: | |
| push ax ; save ax | |
| mov ax,es ; ax = es | |
| shr ax,(BLOCK_SHIFT-4) ; ax = Number of blocks into mem system | |
| and ax,07fh ; ax = Number of blocks into current seg | |
| add ax,bx ; ax = End Block number of transfer | |
| cmp ax,080h ; See if it crosses a 64K boundry | |
| jle NotCrossing64KBoundry ; Branch if not crossing 64K boundry | |
| sub ax,080h ; ax = Number of blocks past 64K boundry | |
| sub bx,ax ; Decrease transfer size by block overage | |
| NotCrossing64KBoundry: | |
| pop ax ; restore ax | |
| push cx | |
| mov cl,dl ; cl = (StartLBA % MaxSector) + 1 = Sector | |
| xor dx,dx ; dx = 0 | |
| div word ptr [bp+2] ; ax = ax / (MaxHead + 1) = Cylinder | |
| ; dx = ax % (MaxHead + 1) = Head | |
| push bx ; Save number of blocks to transfer | |
| mov dh,dl ; dh = Head | |
| mov bp,07c00h ; bp = 0x7c00 | |
| mov dl,byte ptr [bp+PhysicalDrive] ; dl = Drive Number | |
| mov ch,al ; ch = Cylinder | |
| mov al,bl ; al = Blocks | |
| mov ah,2 ; ah = Function 2 | |
| mov bx,di ; es:bx = Buffer address | |
| int 013h | |
| jc DiskError | |
| pop bx | |
| pop cx | |
| movzx ebx,bx | |
| add esi,ebx ; StartLBA = StartLBA + NumberOfBlocks | |
| sub cx,bx ; Blocks = Blocks - NumberOfBlocks | |
| mov ax,es | |
| shl bx,(BLOCK_SHIFT-4) | |
| add ax,bx | |
| mov es,ax ; es:di = es:di + NumberOfBlocks*BLOCK_SIZE | |
| cmp cx,0 | |
| jne ReadCylinderLoop | |
| popa | |
| ret | |
| DiskError: | |
| push cs | |
| pop ds | |
| lea si, [ErrorString] | |
| mov cx, 7 | |
| jmp PrintStringAndHalt | |
| PrintStringAndHalt: | |
| mov ax,0b800h | |
| mov es,ax | |
| mov di,160 | |
| rep movsw | |
| Halt: | |
| jmp Halt | |
| ErrorString: | |
| db 'S', 0ch, 'E', 0ch, 'r', 0ch, 'r', 0ch, 'o', 0ch, 'r', 0ch, '!', 0ch | |
| org 01fah | |
| LBAOffsetForBootSector: | |
| dd 0h | |
| org 01feh | |
| dw 0aa55h | |
| ;****************************************************************************** | |
| ;****************************************************************************** | |
| ;****************************************************************************** | |
| DELAY_PORT equ 0edh ; Port to use for 1uS delay | |
| KBD_CONTROL_PORT equ 060h ; 8042 control port | |
| KBD_STATUS_PORT equ 064h ; 8042 status port | |
| WRITE_DATA_PORT_CMD equ 0d1h ; 8042 command to write the data port | |
| ENABLE_A20_CMD equ 0dfh ; 8042 command to enable A20 | |
| org 200h | |
| jmp start | |
| Em64String: | |
| db 'E', 0ch, 'm', 0ch, '6', 0ch, '4', 0ch, 'T', 0ch, ' ', 0ch, 'U', 0ch, 'n', 0ch, 's', 0ch, 'u', 0ch, 'p', 0ch, 'p', 0ch, 'o', 0ch, 'r', 0ch, 't', 0ch, 'e', 0ch, 'd', 0ch, '!', 0ch | |
| start: | |
| mov ax,cs | |
| mov ds,ax | |
| mov es,ax | |
| mov ss,ax | |
| mov sp,MyStack | |
| ; mov ax,0b800h | |
| ; mov es,ax | |
| ; mov byte ptr es:[160],'a' | |
| ; mov ax,cs | |
| ; mov es,ax | |
| mov ebx,0 | |
| lea edi,MemoryMap | |
| MemMapLoop: | |
| mov eax,0e820h | |
| mov ecx,20 | |
| mov edx,'SMAP' | |
| int 15h | |
| jc MemMapDone | |
| add edi,20 | |
| cmp ebx,0 | |
| je MemMapDone | |
| jmp MemMapLoop | |
| MemMapDone: | |
| lea eax,MemoryMap | |
| sub edi,eax ; Get the address of the memory map | |
| mov dword ptr [MemoryMapSize],edi ; Save the size of the memory map | |
| xor ebx,ebx | |
| mov bx,cs ; BX=segment | |
| shl ebx,4 ; BX="linear" address of segment base | |
| lea eax,[GDT_BASE + ebx] ; EAX=PHYSICAL address of gdt | |
| mov dword ptr [gdtr + 2],eax ; Put address of gdt into the gdtr | |
| lea eax,[IDT_BASE + ebx] ; EAX=PHYSICAL address of idt | |
| mov dword ptr [idtr + 2],eax ; Put address of idt into the idtr | |
| lea edx,[MemoryMapSize + ebx] ; Physical base address of the memory map | |
| add ebx,01000h ; Source of EFI32 | |
| mov dword ptr [JUMP+2],ebx | |
| add ebx,01000h | |
| mov esi,ebx ; Source of EFILDR32 | |
| ; mov ax,0b800h | |
| ; mov es,ax | |
| ; mov byte ptr es:[162],'b' | |
| ; mov ax,cs | |
| ; mov es,ax | |
| ; | |
| ; Enable A20 Gate | |
| ; | |
| mov ax,2401h ; Enable A20 Gate | |
| int 15h | |
| jnc A20GateEnabled ; Jump if it suceeded | |
| ; | |
| ; If INT 15 Function 2401 is not supported, then attempt to Enable A20 manually. | |
| ; | |
| call Empty8042InputBuffer ; Empty the Input Buffer on the 8042 controller | |
| jnz Timeout8042 ; Jump if the 8042 timed out | |
| out DELAY_PORT,ax ; Delay 1 uS | |
| mov al,WRITE_DATA_PORT_CMD ; 8042 cmd to write output port | |
| out KBD_STATUS_PORT,al ; Send command to the 8042 | |
| call Empty8042InputBuffer ; Empty the Input Buffer on the 8042 controller | |
| jnz Timeout8042 ; Jump if the 8042 timed out | |
| mov al,ENABLE_A20_CMD ; gate address bit 20 on | |
| out KBD_CONTROL_PORT,al ; Send command to thre 8042 | |
| call Empty8042InputBuffer ; Empty the Input Buffer on the 8042 controller | |
| mov cx,25 ; Delay 25 uS for the command to complete on the 8042 | |
| Delay25uS: | |
| out DELAY_PORT,ax ; Delay 1 uS | |
| loop Delay25uS | |
| Timeout8042: | |
| A20GateEnabled: | |
| mov bx,0008h ; Flat data descriptor | |
| ; | |
| ; DISABLE INTERRUPTS - Entering Protected Mode | |
| ; | |
| cli | |
| ; mov ax,0b800h | |
| ; mov es,ax | |
| ; mov byte ptr es:[164],'c' | |
| ; mov ax,cs | |
| ; mov es,ax | |
| db 66h | |
| lgdt fword ptr [gdtr] | |
| db 66h | |
| lidt fword ptr [idtr] | |
| mov eax,cr0 | |
| or al,1 | |
| mov cr0,eax | |
| JUMP: | |
| ; jmp far 0010:00020000 | |
| db 066h | |
| db 0eah | |
| dd 000020000h | |
| dw 00010h | |
| Empty8042InputBuffer: | |
| mov cx,0 | |
| Empty8042Loop: | |
| out DELAY_PORT,ax ; Delay 1us | |
| in al,KBD_STATUS_PORT ; Read the 8042 Status Port | |
| and al,02h ; Check the Input Buffer Full Flag | |
| loopnz Empty8042Loop ; Loop until the input buffer is empty or a timout of 65536 uS | |
| ret | |
| ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; | |
| ; data | |
| ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; | |
| align 02h | |
| gdtr dw GDT_END - GDT_BASE - 1 ; GDT limit | |
| dd 0 ; (GDT base gets set above) | |
| ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; | |
| ; global descriptor table (GDT) | |
| ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; | |
| align 02h | |
| public GDT_BASE | |
| GDT_BASE: | |
| ; null descriptor | |
| NULL_SEL equ $-GDT_BASE | |
| dw 0 ; limit 15:0 | |
| dw 0 ; base 15:0 | |
| db 0 ; base 23:16 | |
| db 0 ; type | |
| db 0 ; limit 19:16, flags | |
| db 0 ; base 31:24 | |
| ; linear data segment descriptor | |
| LINEAR_SEL equ $-GDT_BASE | |
| dw 0FFFFh ; limit 0xFFFFF | |
| dw 0 ; base 0 | |
| db 0 | |
| db 092h ; present, ring 0, data, expand-up, writable | |
| db 0CFh ; page-granular, 32-bit | |
| db 0 | |
| ; linear code segment descriptor | |
| LINEAR_CODE_SEL equ $-GDT_BASE | |
| dw 0FFFFh ; limit 0xFFFFF | |
| dw 0 ; base 0 | |
| db 0 | |
| db 09Ah ; present, ring 0, data, expand-up, writable | |
| db 0CFh ; page-granular, 32-bit | |
| db 0 | |
| ; system data segment descriptor | |
| SYS_DATA_SEL equ $-GDT_BASE | |
| dw 0FFFFh ; limit 0xFFFFF | |
| dw 0 ; base 0 | |
| db 0 | |
| db 092h ; present, ring 0, data, expand-up, writable | |
| db 0CFh ; page-granular, 32-bit | |
| db 0 | |
| ; system code segment descriptor | |
| SYS_CODE_SEL equ $-GDT_BASE | |
| dw 0FFFFh ; limit 0xFFFFF | |
| dw 0 ; base 0 | |
| db 0 | |
| db 09Ah ; present, ring 0, data, expand-up, writable | |
| db 0CFh ; page-granular, 32-bit | |
| db 0 | |
| ; spare segment descriptor | |
| SPARE3_SEL equ $-GDT_BASE | |
| dw 0 ; limit 0xFFFFF | |
| dw 0 ; base 0 | |
| db 0 | |
| db 0 ; present, ring 0, data, expand-up, writable | |
| db 0 ; page-granular, 32-bit | |
| db 0 | |
| ; spare segment descriptor | |
| SPARE4_SEL equ $-GDT_BASE | |
| dw 0 ; limit 0xFFFFF | |
| dw 0 ; base 0 | |
| db 0 | |
| db 0 ; present, ring 0, data, expand-up, writable | |
| db 0 ; page-granular, 32-bit | |
| db 0 | |
| ; spare segment descriptor | |
| SPARE5_SEL equ $-GDT_BASE | |
| dw 0 ; limit 0xFFFFF | |
| dw 0 ; base 0 | |
| db 0 | |
| db 0 ; present, ring 0, data, expand-up, writable | |
| db 0 ; page-granular, 32-bit | |
| db 0 | |
| GDT_END: | |
| align 02h | |
| idtr dw IDT_END - IDT_BASE - 1 ; IDT limit | |
| dd 0 ; (IDT base gets set above) | |
| ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; | |
| ; interrupt descriptor table (IDT) | |
| ; | |
| ; Note: The hardware IRQ's specified in this table are the normal PC/AT IRQ | |
| ; mappings. This implementation only uses the system timer and all other | |
| ; IRQs will remain masked. The descriptors for vectors 33+ are provided | |
| ; for convenience. | |
| ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; | |
| ;idt_tag db "IDT",0 | |
| align 02h | |
| public IDT_BASE | |
| IDT_BASE: | |
| ; divide by zero (INT 0) | |
| DIV_ZERO_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; debug exception (INT 1) | |
| DEBUG_EXCEPT_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; NMI (INT 2) | |
| NMI_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; soft breakpoint (INT 3) | |
| BREAKPOINT_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; overflow (INT 4) | |
| OVERFLOW_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; bounds check (INT 5) | |
| BOUNDS_CHECK_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; invalid opcode (INT 6) | |
| INVALID_OPCODE_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; device not available (INT 7) | |
| DEV_NOT_AVAIL_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; double fault (INT 8) | |
| DOUBLE_FAULT_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; Coprocessor segment overrun - reserved (INT 9) | |
| RSVD_INTR_SEL1 equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; invalid TSS (INT 0ah) | |
| INVALID_TSS_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; segment not present (INT 0bh) | |
| SEG_NOT_PRESENT_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; stack fault (INT 0ch) | |
| STACK_FAULT_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; general protection (INT 0dh) | |
| GP_FAULT_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; page fault (INT 0eh) | |
| PAGE_FAULT_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; Intel reserved - do not use (INT 0fh) | |
| RSVD_INTR_SEL2 equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; floating point error (INT 10h) | |
| FLT_POINT_ERR_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; alignment check (INT 11h) | |
| ALIGNMENT_CHECK_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; (10001110)type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; machine check (INT 12h) | |
| MACHINE_CHECK_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; (10001110)type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; SIMD floating-point exception (INT 13h) | |
| SIMD_EXCEPTION_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; (10001110)type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; 85 unspecified descriptors, First 12 of them are reserved, the rest are avail | |
| db (85 * 8) dup(0) | |
| ; IRQ 0 (System timer) - (INT 68h) | |
| IRQ0_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; (10001110)type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; IRQ 1 (8042 Keyboard controller) - (INT 69h) | |
| IRQ1_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; (10001110)type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; Reserved - IRQ 2 redirect (IRQ 2) - DO NOT USE!!! - (INT 6ah) | |
| IRQ2_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; (10001110)type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; IRQ 3 (COM 2) - (INT 6bh) | |
| IRQ3_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; (10001110)type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; IRQ 4 (COM 1) - (INT 6ch) | |
| IRQ4_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; (10001110)type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; IRQ 5 (LPT 2) - (INT 6dh) | |
| IRQ5_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; (10001110)type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; IRQ 6 (Floppy controller) - (INT 6eh) | |
| IRQ6_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; (10001110)type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; IRQ 7 (LPT 1) - (INT 6fh) | |
| IRQ7_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; (10001110)type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; IRQ 8 (RTC Alarm) - (INT 70h) | |
| IRQ8_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; (10001110)type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; IRQ 9 - (INT 71h) | |
| IRQ9_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; (10001110)type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; IRQ 10 - (INT 72h) | |
| IRQ10_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; (10001110)type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; IRQ 11 - (INT 73h) | |
| IRQ11_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; (10001110)type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; IRQ 12 (PS/2 mouse) - (INT 74h) | |
| IRQ12_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; (10001110)type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; IRQ 13 (Floating point error) - (INT 75h) | |
| IRQ13_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; (10001110)type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; IRQ 14 (Secondary IDE) - (INT 76h) | |
| IRQ14_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; (10001110)type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| ; IRQ 15 (Primary IDE) - (INT 77h) | |
| IRQ15_SEL equ $-IDT_BASE | |
| dw 0 ; offset 15:0 | |
| dw SYS_CODE_SEL ; selector 15:0 | |
| db 0 ; 0 for interrupt gate | |
| db 0eh OR 80h ; (10001110)type = 386 interrupt gate, present | |
| dw 0 ; offset 31:16 | |
| IDT_END: | |
| align 02h | |
| MemoryMapSize dd 0 | |
| MemoryMap dd 0,0,0,0,0,0,0,0 | |
| dd 0,0,0,0,0,0,0,0 | |
| dd 0,0,0,0,0,0,0,0 | |
| dd 0,0,0,0,0,0,0,0 | |
| dd 0,0,0,0,0,0,0,0 | |
| dd 0,0,0,0,0,0,0,0 | |
| dd 0,0,0,0,0,0,0,0 | |
| dd 0,0,0,0,0,0,0,0 | |
| dd 0,0,0,0,0,0,0,0 | |
| dd 0,0,0,0,0,0,0,0 | |
| dd 0,0,0,0,0,0,0,0 | |
| dd 0,0,0,0,0,0,0,0 | |
| dd 0,0,0,0,0,0,0,0 | |
| dd 0,0,0,0,0,0,0,0 | |
| dd 0,0,0,0,0,0,0,0 | |
| dd 0,0,0,0,0,0,0,0 | |
| dd 0,0,0,0,0,0,0,0 | |
| dd 0,0,0,0,0,0,0,0 | |
| dd 0,0,0,0,0,0,0,0 | |
| dd 0,0,0,0,0,0,0,0 | |
| dd 0,0,0,0,0,0,0,0 | |
| dd 0,0,0,0,0,0,0,0 | |
| dd 0,0,0,0,0,0,0,0 | |
| dd 0,0,0,0,0,0,0,0 | |
| dd 0,0,0,0,0,0,0,0 | |
| dd 0,0,0,0,0,0,0,0 | |
| dd 0,0,0,0,0,0,0,0 | |
| dd 0,0,0,0,0,0,0,0 | |
| dd 0,0,0,0,0,0,0,0 | |
| dd 0,0,0,0,0,0,0,0 | |
| dd 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 | |
| dd 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 | |
| org 0fe0h | |
| MyStack: | |
| ; below is the pieces of the IVT that is used to redirect INT 68h - 6fh | |
| ; back to INT 08h - 0fh when in real mode... It is 'org'ed to a | |
| ; known low address (20f00) so it can be set up by PlMapIrqToVect in | |
| ; 8259.c | |
| int 8 | |
| iret | |
| int 9 | |
| iret | |
| int 10 | |
| iret | |
| int 11 | |
| iret | |
| int 12 | |
| iret | |
| int 13 | |
| iret | |
| int 14 | |
| iret | |
| int 15 | |
| iret | |
| org 0ffeh | |
| BlockSignature: | |
| dw 0aa55h | |
| end |