/** @file | |
Fault Tolerant Write protocol provides boot-time service for fault tolerant | |
write capability for block devices. The protocol provides for non-volatile | |
storage of the intermediate data and private information a caller would need to | |
recover from a critical fault, such as a power failure. | |
Copyright (c) 2009 - 2010, Intel Corporation. All rights reserved.<BR> | |
This program and the accompanying materials are licensed and made available under | |
the terms and conditions of the BSD License that accompanies this distribution. | |
The full text of the license may be found at | |
http://opensource.org/licenses/bsd-license.php. | |
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
**/ | |
#ifndef _FW_FAULT_TOLERANT_WRITE_PROTOCOL_H_ | |
#define _FW_FAULT_TOLERANT_WRITE_PROTOCOL_H_ | |
#define EFI_FAULT_TOLERANT_WRITE_PROTOCOL_GUID \ | |
{ \ | |
0x3ebd9e82, 0x2c78, 0x4de6, {0x97, 0x86, 0x8d, 0x4b, 0xfc, 0xb7, 0xc8, 0x81 } \ | |
} | |
// | |
// Forward reference for pure ANSI compatability | |
// | |
typedef struct _EFI_FAULT_TOLERANT_WRITE_PROTOCOL EFI_FAULT_TOLERANT_WRITE_PROTOCOL; | |
/** | |
Get the size of the largest block that can be updated in a fault-tolerant manner. | |
@param This Indicates a pointer to the calling context. | |
@param BlockSize A pointer to a caller-allocated UINTN that is | |
updated to indicate the size of the largest block | |
that can be updated. | |
@retval EFI_SUCCESS The function completed successfully. | |
@retval EFI_ABORTED The function could not complete successfully. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_FAULT_TOLERANT_WRITE_GET_MAX_BLOCK_SIZE)( | |
IN EFI_FAULT_TOLERANT_WRITE_PROTOCOL * This, | |
OUT UINTN *BlockSize | |
); | |
/** | |
Allocates space for the protocol to maintain information about writes. | |
Since writes must be completed in a fault-tolerant manner and multiple | |
writes require more resources to be successful, this function | |
enables the protocol to ensure that enough space exists to track | |
information about upcoming writes. | |
@param This A pointer to the calling context. | |
@param CallerId The GUID identifying the write. | |
@param PrivateDataSize The size of the caller's private data that must be | |
recorded for each write. | |
@param NumberOfWrites The number of fault tolerant block writes that will | |
need to occur. | |
@retval EFI_SUCCESS The function completed successfully | |
@retval EFI_ABORTED The function could not complete successfully. | |
@retval EFI_ACCESS_DENIED Not all allocated writes have been completed. All | |
writes must be completed or aborted before another | |
fault tolerant write can occur. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_FAULT_TOLERANT_WRITE_ALLOCATE)( | |
IN EFI_FAULT_TOLERANT_WRITE_PROTOCOL * This, | |
IN EFI_GUID * CallerId, | |
IN UINTN PrivateDataSize, | |
IN UINTN NumberOfWrites | |
); | |
/** | |
Starts a target block update. This records information about the write | |
in fault tolerant storage, and will complete the write in a recoverable | |
manner, ensuring at all times that either the original contents or | |
the modified contents are available. | |
@param This The calling context. | |
@param Lba The logical block address of the target block. | |
@param Offset The offset within the target block to place the | |
data. | |
@param Length The number of bytes to write to the target block. | |
@param PrivateData A pointer to private data that the caller requires | |
to complete any pending writes in the event of a | |
fault. | |
@param FvBlockHandle The handle of FVB protocol that provides services | |
for reading, writing, and erasing the target block. | |
@param Buffer The data to write. | |
@retval EFI_SUCCESS The function completed successfully. | |
@retval EFI_ABORTED The function could not complete successfully. | |
@retval EFI_BAD_BUFFER_SIZE The write would span a block boundary, which is not | |
a valid action. | |
@retval EFI_ACCESS_DENIED No writes have been allocated. | |
@retval EFI_NOT_READY The last write has not been completed. Restart() | |
must be called to complete it. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_FAULT_TOLERANT_WRITE_WRITE)( | |
IN EFI_FAULT_TOLERANT_WRITE_PROTOCOL * This, | |
IN EFI_LBA Lba, | |
IN UINTN Offset, | |
IN UINTN Length, | |
IN VOID *PrivateData, | |
IN EFI_HANDLE FvbHandle, | |
IN VOID *Buffer | |
); | |
/** | |
Restarts a previously interrupted write. The caller must provide the | |
block protocol needed to complete the interrupted write. | |
@param This The calling context. | |
@param FvBlockProtocol The handle of FVB protocol that provides services. | |
for reading, writing, and erasing the target block. | |
@retval EFI_SUCCESS The function completed successfully. | |
@retval EFI_ABORTED The function could not complete successfully. | |
@retval EFI_ACCESS_DENIED No pending writes exist. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_FAULT_TOLERANT_WRITE_RESTART)( | |
IN EFI_FAULT_TOLERANT_WRITE_PROTOCOL * This, | |
IN EFI_HANDLE FvbHandle | |
); | |
/** | |
Aborts all previously allocated writes. | |
@param This The calling context. | |
@retval EFI_SUCCESS The function completed successfully. | |
@retval EFI_ABORTED The function could not complete successfully. | |
@retval EFI_NOT_FOUND No allocated writes exist. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_FAULT_TOLERANT_WRITE_ABORT)( | |
IN EFI_FAULT_TOLERANT_WRITE_PROTOCOL * This | |
); | |
/** | |
Starts a target block update. This function records information about the write | |
in fault-tolerant storage and completes the write in a recoverable | |
manner, ensuring at all times that either the original contents or | |
the modified contents are available. | |
@param This Indicates a pointer to the calling context. | |
@param CallerId The GUID identifying the last write. | |
@param Lba The logical block address of the last write. | |
@param Offset The offset within the block of the last write. | |
@param Length The length of the last write. | |
@param PrivateDataSize On input, the size of the PrivateData buffer. On | |
output, the size of the private data stored for | |
this write. | |
@param PrivateData A pointer to a buffer. The function will copy | |
PrivateDataSize bytes from the private data stored | |
for this write. | |
@param Complete A Boolean value with TRUE indicating that the write | |
was completed. | |
@retval EFI_SUCCESS The function completed successfully. | |
@retval EFI_ABORTED The function could not complete successfully. | |
@retval EFI_NOT_FOUND No allocated writes exist. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_FAULT_TOLERANT_WRITE_GET_LAST_WRITE)( | |
IN EFI_FAULT_TOLERANT_WRITE_PROTOCOL * This, | |
OUT EFI_GUID * CallerId, | |
OUT EFI_LBA *Lba, | |
OUT UINTN *Offset, | |
OUT UINTN *Length, | |
IN OUT UINTN *PrivateDataSize, | |
OUT VOID *PrivateData, | |
OUT BOOLEAN *Complete | |
); | |
// | |
// Protocol declaration | |
// | |
struct _EFI_FAULT_TOLERANT_WRITE_PROTOCOL { | |
EFI_FAULT_TOLERANT_WRITE_GET_MAX_BLOCK_SIZE GetMaxBlockSize; | |
EFI_FAULT_TOLERANT_WRITE_ALLOCATE Allocate; | |
EFI_FAULT_TOLERANT_WRITE_WRITE Write; | |
EFI_FAULT_TOLERANT_WRITE_RESTART Restart; | |
EFI_FAULT_TOLERANT_WRITE_ABORT Abort; | |
EFI_FAULT_TOLERANT_WRITE_GET_LAST_WRITE GetLastWrite; | |
}; | |
extern EFI_GUID gEfiFaultTolerantWriteProtocolGuid; | |
#endif |