| /** @file | |
| When installed, the MP Services Protocol produces a collection of services | |
| that are needed for MP management. | |
| The MP Services Protocol provides a generalized way of performing following tasks: | |
| - Retrieving information of multi-processor environment and MP-related status of | |
| specific processors. | |
| - Dispatching user-provided function to APs. | |
| - Maintain MP-related processor status. | |
| The MP Services Protocol must be produced on any system with more than one logical | |
| processor. | |
| The Protocol is available only during boot time. | |
| MP Services Protocol is hardware-independent. Most of the logic of this protocol | |
| is architecturally neutral. It abstracts the multi-processor environment and | |
| status of processors, and provides interfaces to retrieve information, maintain, | |
| and dispatch. | |
| MP Services Protocol may be consumed by ACPI module. The ACPI module may use this | |
| protocol to retrieve data that are needed for an MP platform and report them to OS. | |
| MP Services Protocol may also be used to program and configure processors, such | |
| as MTRR synchronization for memory space attributes setting in DXE Services. | |
| MP Services Protocol may be used by non-CPU DXE drivers to speed up platform boot | |
| by taking advantage of the processing capabilities of the APs, for example, using | |
| APs to help test system memory in parallel with other device initialization. | |
| Diagnostics applications may also use this protocol for multi-processor. | |
| Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR> | |
| This program and the accompanying materials are licensed and made available under | |
| the terms and conditions of the BSD License that accompanies this distribution. | |
| The full text of the license may be found at | |
| http://opensource.org/licenses/bsd-license.php. | |
| THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
| WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
| @par Revision Reference: | |
| This Protocol is defined in the UEFI Platform Initialization Specification 1.2, | |
| Volume 2:Driver Execution Environment Core Interface. | |
| **/ | |
| #ifndef _MP_SERVICE_PROTOCOL_H_ | |
| #define _MP_SERVICE_PROTOCOL_H_ | |
| /// | |
| /// Global ID for the EFI_MP_SERVICES_PROTOCOL. | |
| /// | |
| #define EFI_MP_SERVICES_PROTOCOL_GUID \ | |
| { \ | |
| 0x3fdda605, 0xa76e, 0x4f46, {0xad, 0x29, 0x12, 0xf4, 0x53, 0x1b, 0x3d, 0x08} \ | |
| } | |
| /// | |
| /// Forward declaration for the EFI_MP_SERVICES_PROTOCOL. | |
| /// | |
| typedef struct _EFI_MP_SERVICES_PROTOCOL EFI_MP_SERVICES_PROTOCOL; | |
| /// | |
| /// Terminator for a list of failed CPUs returned by StartAllAPs(). | |
| /// | |
| #define END_OF_CPU_LIST 0xffffffff | |
| /// | |
| /// This bit is used in the StatusFlag field of EFI_PROCESSOR_INFORMATION and | |
| /// indicates whether the processor is playing the role of BSP. If the bit is 1, | |
| /// then the processor is BSP. Otherwise, it is AP. | |
| /// | |
| #define PROCESSOR_AS_BSP_BIT 0x00000001 | |
| /// | |
| /// This bit is used in the StatusFlag field of EFI_PROCESSOR_INFORMATION and | |
| /// indicates whether the processor is enabled. If the bit is 1, then the | |
| /// processor is enabled. Otherwise, it is disabled. | |
| /// | |
| #define PROCESSOR_ENABLED_BIT 0x00000002 | |
| /// | |
| /// This bit is used in the StatusFlag field of EFI_PROCESSOR_INFORMATION and | |
| /// indicates whether the processor is healthy. If the bit is 1, then the | |
| /// processor is healthy. Otherwise, some fault has been detected for the processor. | |
| /// | |
| #define PROCESSOR_HEALTH_STATUS_BIT 0x00000004 | |
| /// | |
| /// Structure that describes the pyhiscal location of a logical CPU. | |
| /// | |
| typedef struct { | |
| /// | |
| /// Zero-based physical package number that identifies the cartridge of the processor. | |
| /// | |
| UINT32 Package; | |
| /// | |
| /// Zero-based physical core number within package of the processor. | |
| /// | |
| UINT32 Core; | |
| /// | |
| /// Zero-based logical thread number within core of the processor. | |
| /// | |
| UINT32 Thread; | |
| } EFI_CPU_PHYSICAL_LOCATION; | |
| /// | |
| /// Structure that describes information about a logical CPU. | |
| /// | |
| typedef struct { | |
| /// | |
| /// The unique processor ID determined by system hardware. For IA32 and X64, | |
| /// the processor ID is the same as the Local APIC ID. Only the lower 8 bits | |
| /// are used, and higher bits are reserved. For IPF, the lower 16 bits contains | |
| /// id/eid, and higher bits are reserved. | |
| /// | |
| UINT64 ProcessorId; | |
| /// | |
| /// Flags indicating if the processor is BSP or AP, if the processor is enabled | |
| /// or disabled, and if the processor is healthy. Bits 3..31 are reserved and | |
| /// must be 0. | |
| /// | |
| /// <pre> | |
| /// BSP ENABLED HEALTH Description | |
| /// === ======= ====== =================================================== | |
| /// 0 0 0 Unhealthy Disabled AP. | |
| /// 0 0 1 Healthy Disabled AP. | |
| /// 0 1 0 Unhealthy Enabled AP. | |
| /// 0 1 1 Healthy Enabled AP. | |
| /// 1 0 0 Invalid. The BSP can never be in the disabled state. | |
| /// 1 0 1 Invalid. The BSP can never be in the disabled state. | |
| /// 1 1 0 Unhealthy Enabled BSP. | |
| /// 1 1 1 Healthy Enabled BSP. | |
| /// </pre> | |
| /// | |
| UINT32 StatusFlag; | |
| /// | |
| /// The physical location of the processor, including the physical package number | |
| /// that identifies the cartridge, the physical core number within package, and | |
| /// logical thread number within core. | |
| /// | |
| EFI_CPU_PHYSICAL_LOCATION Location; | |
| } EFI_PROCESSOR_INFORMATION; | |
| /** | |
| This service retrieves the number of logical processor in the platform | |
| and the number of those logical processors that are enabled on this boot. | |
| This service may only be called from the BSP. | |
| This function is used to retrieve the following information: | |
| - The number of logical processors that are present in the system. | |
| - The number of enabled logical processors in the system at the instant | |
| this call is made. | |
| Because MP Service Protocol provides services to enable and disable processors | |
| dynamically, the number of enabled logical processors may vary during the | |
| course of a boot session. | |
| If this service is called from an AP, then EFI_DEVICE_ERROR is returned. | |
| If NumberOfProcessors or NumberOfEnabledProcessors is NULL, then | |
| EFI_INVALID_PARAMETER is returned. Otherwise, the total number of processors | |
| is returned in NumberOfProcessors, the number of currently enabled processor | |
| is returned in NumberOfEnabledProcessors, and EFI_SUCCESS is returned. | |
| @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL | |
| instance. | |
| @param[out] NumberOfProcessors Pointer to the total number of logical | |
| processors in the system, including the BSP | |
| and disabled APs. | |
| @param[out] NumberOfEnabledProcessors Pointer to the number of enabled logical | |
| processors that exist in system, including | |
| the BSP. | |
| @retval EFI_SUCCESS The number of logical processors and enabled | |
| logical processors was retrieved. | |
| @retval EFI_DEVICE_ERROR The calling processor is an AP. | |
| @retval EFI_INVALID_PARAMETER NumberOfProcessors is NULL. | |
| @retval EFI_INVALID_PARAMETER NumberOfEnabledProcessors is NULL. | |
| **/ | |
| typedef | |
| EFI_STATUS | |
| (EFIAPI *EFI_MP_SERVICES_GET_NUMBER_OF_PROCESSORS)( | |
| IN EFI_MP_SERVICES_PROTOCOL *This, | |
| OUT UINTN *NumberOfProcessors, | |
| OUT UINTN *NumberOfEnabledProcessors | |
| ); | |
| /** | |
| Gets detailed MP-related information on the requested processor at the | |
| instant this call is made. This service may only be called from the BSP. | |
| This service retrieves detailed MP-related information about any processor | |
| on the platform. Note the following: | |
| - The processor information may change during the course of a boot session. | |
| - The information presented here is entirely MP related. | |
| Information regarding the number of caches and their sizes, frequency of operation, | |
| slot numbers is all considered platform-related information and is not provided | |
| by this service. | |
| @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL | |
| instance. | |
| @param[in] ProcessorNumber The handle number of processor. | |
| @param[out] ProcessorInfoBuffer A pointer to the buffer where information for | |
| the requested processor is deposited. | |
| @retval EFI_SUCCESS Processor information was returned. | |
| @retval EFI_DEVICE_ERROR The calling processor is an AP. | |
| @retval EFI_INVALID_PARAMETER ProcessorInfoBuffer is NULL. | |
| @retval EFI_NOT_FOUND The processor with the handle specified by | |
| ProcessorNumber does not exist in the platform. | |
| **/ | |
| typedef | |
| EFI_STATUS | |
| (EFIAPI *EFI_MP_SERVICES_GET_PROCESSOR_INFO)( | |
| IN EFI_MP_SERVICES_PROTOCOL *This, | |
| IN UINTN ProcessorNumber, | |
| OUT EFI_PROCESSOR_INFORMATION *ProcessorInfoBuffer | |
| ); | |
| /** | |
| This service executes a caller provided function on all enabled APs. APs can | |
| run either simultaneously or one at a time in sequence. This service supports | |
| both blocking and non-blocking requests. The non-blocking requests use EFI | |
| events so the BSP can detect when the APs have finished. This service may only | |
| be called from the BSP. | |
| This function is used to dispatch all the enabled APs to the function specified | |
| by Procedure. If any enabled AP is busy, then EFI_NOT_READY is returned | |
| immediately and Procedure is not started on any AP. | |
| If SingleThread is TRUE, all the enabled APs execute the function specified by | |
| Procedure one by one, in ascending order of processor handle number. Otherwise, | |
| all the enabled APs execute the function specified by Procedure simultaneously. | |
| If WaitEvent is NULL, execution is in blocking mode. The BSP waits until all | |
| APs finish or TimeoutInMicroSecs expires. Otherwise, execution is in non-blocking | |
| mode, and the BSP returns from this service without waiting for APs. If a | |
| non-blocking mode is requested after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT | |
| is signaled, then EFI_UNSUPPORTED must be returned. | |
| If the timeout specified by TimeoutInMicroseconds expires before all APs return | |
| from Procedure, then Procedure on the failed APs is terminated. All enabled APs | |
| are always available for further calls to EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() | |
| and EFI_MP_SERVICES_PROTOCOL.StartupThisAP(). If FailedCpuList is not NULL, its | |
| content points to the list of processor handle numbers in which Procedure was | |
| terminated. | |
| Note: It is the responsibility of the consumer of the EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() | |
| to make sure that the nature of the code that is executed on the BSP and the | |
| dispatched APs is well controlled. The MP Services Protocol does not guarantee | |
| that the Procedure function is MP-safe. Hence, the tasks that can be run in | |
| parallel are limited to certain independent tasks and well-controlled exclusive | |
| code. EFI services and protocols may not be called by APs unless otherwise | |
| specified. | |
| In blocking execution mode, BSP waits until all APs finish or | |
| TimeoutInMicroSeconds expires. | |
| In non-blocking execution mode, BSP is freed to return to the caller and then | |
| proceed to the next task without having to wait for APs. The following | |
| sequence needs to occur in a non-blocking execution mode: | |
| -# The caller that intends to use this MP Services Protocol in non-blocking | |
| mode creates WaitEvent by calling the EFI CreateEvent() service. The caller | |
| invokes EFI_MP_SERVICES_PROTOCOL.StartupAllAPs(). If the parameter WaitEvent | |
| is not NULL, then StartupAllAPs() executes in non-blocking mode. It requests | |
| the function specified by Procedure to be started on all the enabled APs, | |
| and releases the BSP to continue with other tasks. | |
| -# The caller can use the CheckEvent() and WaitForEvent() services to check | |
| the state of the WaitEvent created in step 1. | |
| -# When the APs complete their task or TimeoutInMicroSecondss expires, the MP | |
| Service signals WaitEvent by calling the EFI SignalEvent() function. If | |
| FailedCpuList is not NULL, its content is available when WaitEvent is | |
| signaled. If all APs returned from Procedure prior to the timeout, then | |
| FailedCpuList is set to NULL. If not all APs return from Procedure before | |
| the timeout, then FailedCpuList is filled in with the list of the failed | |
| APs. The buffer is allocated by MP Service Protocol using AllocatePool(). | |
| It is the caller's responsibility to free the buffer with FreePool() service. | |
| -# This invocation of SignalEvent() function informs the caller that invoked | |
| EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() that either all the APs completed | |
| the specified task or a timeout occurred. The contents of FailedCpuList | |
| can be examined to determine which APs did not complete the specified task | |
| prior to the timeout. | |
| @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL | |
| instance. | |
| @param[in] Procedure A pointer to the function to be run on | |
| enabled APs of the system. See type | |
| EFI_AP_PROCEDURE. | |
| @param[in] SingleThread If TRUE, then all the enabled APs execute | |
| the function specified by Procedure one by | |
| one, in ascending order of processor handle | |
| number. If FALSE, then all the enabled APs | |
| execute the function specified by Procedure | |
| simultaneously. | |
| @param[in] WaitEvent The event created by the caller with CreateEvent() | |
| service. If it is NULL, then execute in | |
| blocking mode. BSP waits until all APs finish | |
| or TimeoutInMicroSeconds expires. If it's | |
| not NULL, then execute in non-blocking mode. | |
| BSP requests the function specified by | |
| Procedure to be started on all the enabled | |
| APs, and go on executing immediately. If | |
| all return from Procedure, or TimeoutInMicroSeconds | |
| expires, this event is signaled. The BSP | |
| can use the CheckEvent() or WaitForEvent() | |
| services to check the state of event. Type | |
| EFI_EVENT is defined in CreateEvent() in | |
| the Unified Extensible Firmware Interface | |
| Specification. | |
| @param[in] TimeoutInMicrosecsond Indicates the time limit in microseconds for | |
| APs to return from Procedure, either for | |
| blocking or non-blocking mode. Zero means | |
| infinity. If the timeout expires before | |
| all APs return from Procedure, then Procedure | |
| on the failed APs is terminated. All enabled | |
| APs are available for next function assigned | |
| by EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() | |
| or EFI_MP_SERVICES_PROTOCOL.StartupThisAP(). | |
| If the timeout expires in blocking mode, | |
| BSP returns EFI_TIMEOUT. If the timeout | |
| expires in non-blocking mode, WaitEvent | |
| is signaled with SignalEvent(). | |
| @param[in] ProcedureArgument The parameter passed into Procedure for | |
| all APs. | |
| @param[out] FailedCpuList If NULL, this parameter is ignored. Otherwise, | |
| if all APs finish successfully, then its | |
| content is set to NULL. If not all APs | |
| finish before timeout expires, then its | |
| content is set to address of the buffer | |
| holding handle numbers of the failed APs. | |
| The buffer is allocated by MP Service Protocol, | |
| and it's the caller's responsibility to | |
| free the buffer with FreePool() service. | |
| In blocking mode, it is ready for consumption | |
| when the call returns. In non-blocking mode, | |
| it is ready when WaitEvent is signaled. The | |
| list of failed CPU is terminated by | |
| END_OF_CPU_LIST. | |
| @retval EFI_SUCCESS In blocking mode, all APs have finished before | |
| the timeout expired. | |
| @retval EFI_SUCCESS In non-blocking mode, function has been dispatched | |
| to all enabled APs. | |
| @retval EFI_UNSUPPORTED A non-blocking mode request was made after the | |
| UEFI event EFI_EVENT_GROUP_READY_TO_BOOT was | |
| signaled. | |
| @retval EFI_DEVICE_ERROR Caller processor is AP. | |
| @retval EFI_NOT_STARTED No enabled APs exist in the system. | |
| @retval EFI_NOT_READY Any enabled APs are busy. | |
| @retval EFI_TIMEOUT In blocking mode, the timeout expired before | |
| all enabled APs have finished. | |
| @retval EFI_INVALID_PARAMETER Procedure is NULL. | |
| **/ | |
| typedef | |
| EFI_STATUS | |
| (EFIAPI *EFI_MP_SERVICES_STARTUP_ALL_APS)( | |
| IN EFI_MP_SERVICES_PROTOCOL *This, | |
| IN EFI_AP_PROCEDURE Procedure, | |
| IN BOOLEAN SingleThread, | |
| IN EFI_EVENT WaitEvent OPTIONAL, | |
| IN UINTN TimeoutInMicroSeconds, | |
| IN VOID *ProcedureArgument OPTIONAL, | |
| OUT UINTN **FailedCpuList OPTIONAL | |
| ); | |
| /** | |
| This service lets the caller get one enabled AP to execute a caller-provided | |
| function. The caller can request the BSP to either wait for the completion | |
| of the AP or just proceed with the next task by using the EFI event mechanism. | |
| See EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() for more details on non-blocking | |
| execution support. This service may only be called from the BSP. | |
| This function is used to dispatch one enabled AP to the function specified by | |
| Procedure passing in the argument specified by ProcedureArgument. If WaitEvent | |
| is NULL, execution is in blocking mode. The BSP waits until the AP finishes or | |
| TimeoutInMicroSecondss expires. Otherwise, execution is in non-blocking mode. | |
| BSP proceeds to the next task without waiting for the AP. If a non-blocking mode | |
| is requested after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT is signaled, | |
| then EFI_UNSUPPORTED must be returned. | |
| If the timeout specified by TimeoutInMicroseconds expires before the AP returns | |
| from Procedure, then execution of Procedure by the AP is terminated. The AP is | |
| available for subsequent calls to EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() and | |
| EFI_MP_SERVICES_PROTOCOL.StartupThisAP(). | |
| @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL | |
| instance. | |
| @param[in] Procedure A pointer to the function to be run on | |
| enabled APs of the system. See type | |
| EFI_AP_PROCEDURE. | |
| @param[in] ProcessorNumber The handle number of the AP. The range is | |
| from 0 to the total number of logical | |
| processors minus 1. The total number of | |
| logical processors can be retrieved by | |
| EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors(). | |
| @param[in] WaitEvent The event created by the caller with CreateEvent() | |
| service. If it is NULL, then execute in | |
| blocking mode. BSP waits until all APs finish | |
| or TimeoutInMicroSeconds expires. If it's | |
| not NULL, then execute in non-blocking mode. | |
| BSP requests the function specified by | |
| Procedure to be started on all the enabled | |
| APs, and go on executing immediately. If | |
| all return from Procedure or TimeoutInMicroSeconds | |
| expires, this event is signaled. The BSP | |
| can use the CheckEvent() or WaitForEvent() | |
| services to check the state of event. Type | |
| EFI_EVENT is defined in CreateEvent() in | |
| the Unified Extensible Firmware Interface | |
| Specification. | |
| @param[in] TimeoutInMicrosecsond Indicates the time limit in microseconds for | |
| APs to return from Procedure, either for | |
| blocking or non-blocking mode. Zero means | |
| infinity. If the timeout expires before | |
| all APs return from Procedure, then Procedure | |
| on the failed APs is terminated. All enabled | |
| APs are available for next function assigned | |
| by EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() | |
| or EFI_MP_SERVICES_PROTOCOL.StartupThisAP(). | |
| If the timeout expires in blocking mode, | |
| BSP returns EFI_TIMEOUT. If the timeout | |
| expires in non-blocking mode, WaitEvent | |
| is signaled with SignalEvent(). | |
| @param[in] ProcedureArgument The parameter passed into Procedure for | |
| all APs. | |
| @param[out] Finished If NULL, this parameter is ignored. In | |
| blocking mode, this parameter is ignored. | |
| In non-blocking mode, if AP returns from | |
| Procedure before the timeout expires, its | |
| content is set to TRUE. Otherwise, the | |
| value is set to FALSE. The caller can | |
| determine if the AP returned from Procedure | |
| by evaluating this value. | |
| @retval EFI_SUCCESS In blocking mode, specified AP finished before | |
| the timeout expires. | |
| @retval EFI_SUCCESS In non-blocking mode, the function has been | |
| dispatched to specified AP. | |
| @retval EFI_UNSUPPORTED A non-blocking mode request was made after the | |
| UEFI event EFI_EVENT_GROUP_READY_TO_BOOT was | |
| signaled. | |
| @retval EFI_DEVICE_ERROR The calling processor is an AP. | |
| @retval EFI_TIMEOUT In blocking mode, the timeout expired before | |
| the specified AP has finished. | |
| @retval EFI_NOT_READY The specified AP is busy. | |
| @retval EFI_NOT_FOUND The processor with the handle specified by | |
| ProcessorNumber does not exist. | |
| @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP or disabled AP. | |
| @retval EFI_INVALID_PARAMETER Procedure is NULL. | |
| **/ | |
| typedef | |
| EFI_STATUS | |
| (EFIAPI *EFI_MP_SERVICES_STARTUP_THIS_AP)( | |
| IN EFI_MP_SERVICES_PROTOCOL *This, | |
| IN EFI_AP_PROCEDURE Procedure, | |
| IN UINTN ProcessorNumber, | |
| IN EFI_EVENT WaitEvent OPTIONAL, | |
| IN UINTN TimeoutInMicroseconds, | |
| IN VOID *ProcedureArgument OPTIONAL, | |
| OUT BOOLEAN *Finished OPTIONAL | |
| ); | |
| /** | |
| This service switches the requested AP to be the BSP from that point onward. | |
| This service changes the BSP for all purposes. This call can only be performed | |
| by the current BSP. | |
| This service switches the requested AP to be the BSP from that point onward. | |
| This service changes the BSP for all purposes. The new BSP can take over the | |
| execution of the old BSP and continue seamlessly from where the old one left | |
| off. This service may not be supported after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT | |
| is signaled. | |
| If the BSP cannot be switched prior to the return from this service, then | |
| EFI_UNSUPPORTED must be returned. | |
| @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL instance. | |
| @param[in] ProcessorNumber The handle number of AP that is to become the new | |
| BSP. The range is from 0 to the total number of | |
| logical processors minus 1. The total number of | |
| logical processors can be retrieved by | |
| EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors(). | |
| @param[in] EnableOldBSP If TRUE, then the old BSP will be listed as an | |
| enabled AP. Otherwise, it will be disabled. | |
| @retval EFI_SUCCESS BSP successfully switched. | |
| @retval EFI_UNSUPPORTED Switching the BSP cannot be completed prior to | |
| this service returning. | |
| @retval EFI_UNSUPPORTED Switching the BSP is not supported. | |
| @retval EFI_SUCCESS The calling processor is an AP. | |
| @retval EFI_NOT_FOUND The processor with the handle specified by | |
| ProcessorNumber does not exist. | |
| @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the current BSP or | |
| a disabled AP. | |
| @retval EFI_NOT_READY The specified AP is busy. | |
| **/ | |
| typedef | |
| EFI_STATUS | |
| (EFIAPI *EFI_MP_SERVICES_SWITCH_BSP)( | |
| IN EFI_MP_SERVICES_PROTOCOL *This, | |
| IN UINTN ProcessorNumber, | |
| IN BOOLEAN EnableOldBSP | |
| ); | |
| /** | |
| This service lets the caller enable or disable an AP from this point onward. | |
| This service may only be called from the BSP. | |
| This service allows the caller enable or disable an AP from this point onward. | |
| The caller can optionally specify the health status of the AP by Health. If | |
| an AP is being disabled, then the state of the disabled AP is implementation | |
| dependent. If an AP is enabled, then the implementation must guarantee that a | |
| complete initialization sequence is performed on the AP, so the AP is in a state | |
| that is compatible with an MP operating system. This service may not be supported | |
| after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT is signaled. | |
| If the enable or disable AP operation cannot be completed prior to the return | |
| from this service, then EFI_UNSUPPORTED must be returned. | |
| @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL instance. | |
| @param[in] ProcessorNumber The handle number of AP that is to become the new | |
| BSP. The range is from 0 to the total number of | |
| logical processors minus 1. The total number of | |
| logical processors can be retrieved by | |
| EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors(). | |
| @param[in] EnableAP Specifies the new state for the processor for | |
| enabled, FALSE for disabled. | |
| @param[in] HealthFlag If not NULL, a pointer to a value that specifies | |
| the new health status of the AP. This flag | |
| corresponds to StatusFlag defined in | |
| EFI_MP_SERVICES_PROTOCOL.GetProcessorInfo(). Only | |
| the PROCESSOR_HEALTH_STATUS_BIT is used. All other | |
| bits are ignored. If it is NULL, this parameter | |
| is ignored. | |
| @retval EFI_SUCCESS The specified AP was enabled or disabled successfully. | |
| @retval EFI_UNSUPPORTED Enabling or disabling an AP cannot be completed | |
| prior to this service returning. | |
| @retval EFI_UNSUPPORTED Enabling or disabling an AP is not supported. | |
| @retval EFI_DEVICE_ERROR The calling processor is an AP. | |
| @retval EFI_NOT_FOUND Processor with the handle specified by ProcessorNumber | |
| does not exist. | |
| @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP. | |
| **/ | |
| typedef | |
| EFI_STATUS | |
| (EFIAPI *EFI_MP_SERVICES_ENABLEDISABLEAP)( | |
| IN EFI_MP_SERVICES_PROTOCOL *This, | |
| IN UINTN ProcessorNumber, | |
| IN BOOLEAN EnableAP, | |
| IN UINT32 *HealthFlag OPTIONAL | |
| ); | |
| /** | |
| This return the handle number for the calling processor. This service may be | |
| called from the BSP and APs. | |
| This service returns the processor handle number for the calling processor. | |
| The returned value is in the range from 0 to the total number of logical | |
| processors minus 1. The total number of logical processors can be retrieved | |
| with EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors(). This service may be | |
| called from the BSP and APs. If ProcessorNumber is NULL, then EFI_INVALID_PARAMETER | |
| is returned. Otherwise, the current processors handle number is returned in | |
| ProcessorNumber, and EFI_SUCCESS is returned. | |
| @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL instance. | |
| @param[in] ProcessorNumber The handle number of AP that is to become the new | |
| BSP. The range is from 0 to the total number of | |
| logical processors minus 1. The total number of | |
| logical processors can be retrieved by | |
| EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors(). | |
| @retval EFI_SUCCESS The current processor handle number was returned | |
| in ProcessorNumber. | |
| @retval EFI_INVALID_PARAMETER ProcessorNumber is NULL. | |
| **/ | |
| typedef | |
| EFI_STATUS | |
| (EFIAPI *EFI_MP_SERVICES_WHOAMI)( | |
| IN EFI_MP_SERVICES_PROTOCOL *This, | |
| OUT UINTN *ProcessorNumber | |
| ); | |
| /// | |
| /// When installed, the MP Services Protocol produces a collection of services | |
| /// that are needed for MP management. | |
| /// | |
| /// Before the UEFI event EFI_EVENT_GROUP_READY_TO_BOOT is signaled, the module | |
| /// that produces this protocol is required to place all APs into an idle state | |
| /// whenever the APs are disabled or the APs are not executing code as requested | |
| /// through the StartupAllAPs() or StartupThisAP() services. The idle state of | |
| /// an AP before the UEFI event EFI_EVENT_GROUP_READY_TO_BOOT is signaled is | |
| /// implementation dependent. | |
| /// | |
| /// After the UEFI event EFI_EVENT_GROUP_READY_TO_BOOT is signaled, all the APs | |
| /// must be placed in the OS compatible CPU state as defined by the UEFI | |
| /// Specification. Implementations of this protocol may use the UEFI event | |
| /// EFI_EVENT_GROUP_READY_TO_BOOT to force APs into the OS compatible state as | |
| /// defined by the UEFI Specification. Modules that use this protocol must | |
| /// guarantee that all non-blocking mode requests on all APs have been completed | |
| /// before the UEFI event EFI_EVENT_GROUP_READY_TO_BOOT is signaled. Since the | |
| /// order that event notification functions in the same event group are executed | |
| /// is not deterministic, an event of type EFI_EVENT_GROUP_READY_TO_BOOT cannot | |
| /// be used to guarantee that APs have completed their non-blocking mode requests. | |
| /// | |
| /// When the UEFI event EFI_EVENT_GROUP_READY_TO_BOOT is signaled, the StartAllAPs() | |
| /// and StartupThisAp() services must no longer support non-blocking mode requests. | |
| /// The support for SwitchBSP() and EnableDisableAP() may no longer be supported | |
| /// after this event is signaled. Since UEFI Applications and UEFI OS Loaders | |
| /// execute after the UEFI event EFI_EVENT_GROUP_READY_TO_BOOT is signaled, these | |
| /// UEFI images must be aware that the functionality of this protocol may be reduced. | |
| /// | |
| struct _EFI_MP_SERVICES_PROTOCOL { | |
| EFI_MP_SERVICES_GET_NUMBER_OF_PROCESSORS GetNumberOfProcessors; | |
| EFI_MP_SERVICES_GET_PROCESSOR_INFO GetProcessorInfo; | |
| EFI_MP_SERVICES_STARTUP_ALL_APS StartupAllAPs; | |
| EFI_MP_SERVICES_STARTUP_THIS_AP StartupThisAP; | |
| EFI_MP_SERVICES_SWITCH_BSP SwitchBSP; | |
| EFI_MP_SERVICES_ENABLEDISABLEAP EnableDisableAP; | |
| EFI_MP_SERVICES_WHOAMI WhoAmI; | |
| }; | |
| extern EFI_GUID gEfiMpServiceProtocolGuid; | |
| #endif |