/** @file | |
Include file that supports UEFI. | |
This include file must contain things defined in the UEFI 2.4 specification. | |
If a code construct is defined in the UEFI 2.4 specification it must be included | |
by this include file. | |
Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.<BR> | |
This program and the accompanying materials are licensed and made available under | |
the terms and conditions of the BSD License that accompanies this distribution. | |
The full text of the license may be found at | |
http://opensource.org/licenses/bsd-license.php. | |
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
**/ | |
#ifndef __UEFI_SPEC_H__ | |
#define __UEFI_SPEC_H__ | |
#include <Uefi/UefiMultiPhase.h> | |
#include <Protocol/DevicePath.h> | |
#include <Protocol/SimpleTextIn.h> | |
#include <Protocol/SimpleTextInEx.h> | |
#include <Protocol/SimpleTextOut.h> | |
/// | |
/// Enumeration of EFI memory allocation types. | |
/// | |
typedef enum { | |
/// | |
/// Allocate any available range of pages that satisfies the request. | |
/// | |
AllocateAnyPages, | |
/// | |
/// Allocate any available range of pages whose uppermost address is less than | |
/// or equal to a specified maximum address. | |
/// | |
AllocateMaxAddress, | |
/// | |
/// Allocate pages at a specified address. | |
/// | |
AllocateAddress, | |
/// | |
/// Maximum enumeration value that may be used for bounds checking. | |
/// | |
MaxAllocateType | |
} EFI_ALLOCATE_TYPE; | |
// | |
// Bit definitions for EFI_TIME.Daylight | |
// | |
#define EFI_TIME_ADJUST_DAYLIGHT 0x01 | |
#define EFI_TIME_IN_DAYLIGHT 0x02 | |
/// | |
/// Value definition for EFI_TIME.TimeZone. | |
/// | |
#define EFI_UNSPECIFIED_TIMEZONE 0x07FF | |
// | |
// Memory cacheability attributes | |
// | |
#define EFI_MEMORY_UC 0x0000000000000001ULL | |
#define EFI_MEMORY_WC 0x0000000000000002ULL | |
#define EFI_MEMORY_WT 0x0000000000000004ULL | |
#define EFI_MEMORY_WB 0x0000000000000008ULL | |
#define EFI_MEMORY_UCE 0x0000000000000010ULL | |
// | |
// Physical memory protection attributes | |
// | |
#define EFI_MEMORY_WP 0x0000000000001000ULL | |
#define EFI_MEMORY_RP 0x0000000000002000ULL | |
#define EFI_MEMORY_XP 0x0000000000004000ULL | |
// | |
// Runtime memory attribute | |
// | |
#define EFI_MEMORY_RUNTIME 0x8000000000000000ULL | |
/// | |
/// Memory descriptor version number. | |
/// | |
#define EFI_MEMORY_DESCRIPTOR_VERSION 1 | |
/// | |
/// Definition of an EFI memory descriptor. | |
/// | |
typedef struct { | |
/// | |
/// Type of the memory region. See EFI_MEMORY_TYPE. | |
/// | |
UINT32 Type; | |
/// | |
/// Physical address of the first byte of the memory region. Must aligned | |
/// on a 4 KB boundary. | |
/// | |
EFI_PHYSICAL_ADDRESS PhysicalStart; | |
/// | |
/// Virtual address of the first byte of the memory region. Must aligned | |
/// on a 4 KB boundary. | |
/// | |
EFI_VIRTUAL_ADDRESS VirtualStart; | |
/// | |
/// Number of 4KB pages in the memory region. | |
/// | |
UINT64 NumberOfPages; | |
/// | |
/// Attributes of the memory region that describe the bit mask of capabilities | |
/// for that memory region, and not necessarily the current settings for that | |
/// memory region. | |
/// | |
UINT64 Attribute; | |
} EFI_MEMORY_DESCRIPTOR; | |
/** | |
Allocates memory pages from the system. | |
@param[in] Type The type of allocation to perform. | |
@param[in] MemoryType The type of memory to allocate. | |
@param[in] Pages The number of contiguous 4 KB pages to allocate. | |
@param[in, out] Memory The pointer to a physical address. On input, the way in which the address is | |
used depends on the value of Type. | |
@retval EFI_SUCCESS The requested pages were allocated. | |
@retval EFI_INVALID_PARAMETER 1) Type is not AllocateAnyPages or | |
AllocateMaxAddress or AllocateAddress. | |
2) MemoryType is in the range | |
3) Memory is NULL. | |
EfiMaxMemoryType..0x7FFFFFFF. | |
@retval EFI_OUT_OF_RESOURCES The pages could not be allocated. | |
@retval EFI_NOT_FOUND The requested pages could not be found. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_ALLOCATE_PAGES)( | |
IN EFI_ALLOCATE_TYPE Type, | |
IN EFI_MEMORY_TYPE MemoryType, | |
IN UINTN Pages, | |
IN OUT EFI_PHYSICAL_ADDRESS *Memory | |
); | |
/** | |
Frees memory pages. | |
@param[in] Memory The base physical address of the pages to be freed. | |
@param[in] Pages The number of contiguous 4 KB pages to free. | |
@retval EFI_SUCCESS The requested pages were freed. | |
@retval EFI_INVALID_PARAMETER Memory is not a page-aligned address or Pages is invalid. | |
@retval EFI_NOT_FOUND The requested memory pages were not allocated with | |
AllocatePages(). | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_FREE_PAGES)( | |
IN EFI_PHYSICAL_ADDRESS Memory, | |
IN UINTN Pages | |
); | |
/** | |
Returns the current memory map. | |
@param[in, out] MemoryMapSize A pointer to the size, in bytes, of the MemoryMap buffer. | |
On input, this is the size of the buffer allocated by the caller. | |
On output, it is the size of the buffer returned by the firmware if | |
the buffer was large enough, or the size of the buffer needed to contain | |
the map if the buffer was too small. | |
@param[in, out] MemoryMap A pointer to the buffer in which firmware places the current memory | |
map. | |
@param[out] MapKey A pointer to the location in which firmware returns the key for the | |
current memory map. | |
@param[out] DescriptorSize A pointer to the location in which firmware returns the size, in bytes, of | |
an individual EFI_MEMORY_DESCRIPTOR. | |
@param[out] DescriptorVersion A pointer to the location in which firmware returns the version number | |
associated with the EFI_MEMORY_DESCRIPTOR. | |
@retval EFI_SUCCESS The memory map was returned in the MemoryMap buffer. | |
@retval EFI_BUFFER_TOO_SMALL The MemoryMap buffer was too small. The current buffer size | |
needed to hold the memory map is returned in MemoryMapSize. | |
@retval EFI_INVALID_PARAMETER 1) MemoryMapSize is NULL. | |
2) The MemoryMap buffer is not too small and MemoryMap is | |
NULL. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_GET_MEMORY_MAP)( | |
IN OUT UINTN *MemoryMapSize, | |
IN OUT EFI_MEMORY_DESCRIPTOR *MemoryMap, | |
OUT UINTN *MapKey, | |
OUT UINTN *DescriptorSize, | |
OUT UINT32 *DescriptorVersion | |
); | |
/** | |
Allocates pool memory. | |
@param[in] PoolType The type of pool to allocate. | |
@param[in] Size The number of bytes to allocate from the pool. | |
@param[out] Buffer A pointer to a pointer to the allocated buffer if the call succeeds; | |
undefined otherwise. | |
@retval EFI_SUCCESS The requested number of bytes was allocated. | |
@retval EFI_OUT_OF_RESOURCES The pool requested could not be allocated. | |
@retval EFI_INVALID_PARAMETER PoolType was invalid or Buffer is NULL. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_ALLOCATE_POOL)( | |
IN EFI_MEMORY_TYPE PoolType, | |
IN UINTN Size, | |
OUT VOID **Buffer | |
); | |
/** | |
Returns pool memory to the system. | |
@param[in] Buffer The pointer to the buffer to free. | |
@retval EFI_SUCCESS The memory was returned to the system. | |
@retval EFI_INVALID_PARAMETER Buffer was invalid. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_FREE_POOL)( | |
IN VOID *Buffer | |
); | |
/** | |
Changes the runtime addressing mode of EFI firmware from physical to virtual. | |
@param[in] MemoryMapSize The size in bytes of VirtualMap. | |
@param[in] DescriptorSize The size in bytes of an entry in the VirtualMap. | |
@param[in] DescriptorVersion The version of the structure entries in VirtualMap. | |
@param[in] VirtualMap An array of memory descriptors which contain new virtual | |
address mapping information for all runtime ranges. | |
@retval EFI_SUCCESS The virtual address map has been applied. | |
@retval EFI_UNSUPPORTED EFI firmware is not at runtime, or the EFI firmware is already in | |
virtual address mapped mode. | |
@retval EFI_INVALID_PARAMETER DescriptorSize or DescriptorVersion is invalid. | |
@retval EFI_NO_MAPPING A virtual address was not supplied for a range in the memory | |
map that requires a mapping. | |
@retval EFI_NOT_FOUND A virtual address was supplied for an address that is not found | |
in the memory map. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_SET_VIRTUAL_ADDRESS_MAP)( | |
IN UINTN MemoryMapSize, | |
IN UINTN DescriptorSize, | |
IN UINT32 DescriptorVersion, | |
IN EFI_MEMORY_DESCRIPTOR *VirtualMap | |
); | |
/** | |
Connects one or more drivers to a controller. | |
@param[in] ControllerHandle The handle of the controller to which driver(s) are to be connected. | |
@param[in] DriverImageHandle A pointer to an ordered list handles that support the | |
EFI_DRIVER_BINDING_PROTOCOL. | |
@param[in] RemainingDevicePath A pointer to the device path that specifies a child of the | |
controller specified by ControllerHandle. | |
@param[in] Recursive If TRUE, then ConnectController() is called recursively | |
until the entire tree of controllers below the controller specified | |
by ControllerHandle have been created. If FALSE, then | |
the tree of controllers is only expanded one level. | |
@retval EFI_SUCCESS 1) One or more drivers were connected to ControllerHandle. | |
2) No drivers were connected to ControllerHandle, but | |
RemainingDevicePath is not NULL, and it is an End Device | |
Path Node. | |
@retval EFI_INVALID_PARAMETER ControllerHandle is NULL. | |
@retval EFI_NOT_FOUND 1) There are no EFI_DRIVER_BINDING_PROTOCOL instances | |
present in the system. | |
2) No drivers were connected to ControllerHandle. | |
@retval EFI_SECURITY_VIOLATION | |
The user has no permission to start UEFI device drivers on the device path | |
associated with the ControllerHandle or specified by the RemainingDevicePath. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_CONNECT_CONTROLLER)( | |
IN EFI_HANDLE ControllerHandle, | |
IN EFI_HANDLE *DriverImageHandle, OPTIONAL | |
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath, OPTIONAL | |
IN BOOLEAN Recursive | |
); | |
/** | |
Disconnects one or more drivers from a controller. | |
@param[in] ControllerHandle The handle of the controller from which driver(s) are to be disconnected. | |
@param[in] DriverImageHandle The driver to disconnect from ControllerHandle. | |
If DriverImageHandle is NULL, then all the drivers currently managing | |
ControllerHandle are disconnected from ControllerHandle. | |
@param[in] ChildHandle The handle of the child to destroy. | |
If ChildHandle is NULL, then all the children of ControllerHandle are | |
destroyed before the drivers are disconnected from ControllerHandle. | |
@retval EFI_SUCCESS 1) One or more drivers were disconnected from the controller. | |
2) On entry, no drivers are managing ControllerHandle. | |
3) DriverImageHandle is not NULL, and on entry | |
DriverImageHandle is not managing ControllerHandle. | |
@retval EFI_INVALID_PARAMETER 1) ControllerHandle is NULL. | |
2) DriverImageHandle is not NULL, and it is not a valid EFI_HANDLE. | |
3) ChildHandle is not NULL, and it is not a valid EFI_HANDLE. | |
4) DriverImageHandle does not support the EFI_DRIVER_BINDING_PROTOCOL. | |
@retval EFI_OUT_OF_RESOURCES There are not enough resources available to disconnect any drivers from | |
ControllerHandle. | |
@retval EFI_DEVICE_ERROR The controller could not be disconnected because of a device error. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_DISCONNECT_CONTROLLER)( | |
IN EFI_HANDLE ControllerHandle, | |
IN EFI_HANDLE DriverImageHandle, OPTIONAL | |
IN EFI_HANDLE ChildHandle OPTIONAL | |
); | |
// | |
// ConvertPointer DebugDisposition type. | |
// | |
#define EFI_OPTIONAL_PTR 0x00000001 | |
/** | |
Determines the new virtual address that is to be used on subsequent memory accesses. | |
@param[in] DebugDisposition Supplies type information for the pointer being converted. | |
@param[in, out] Address A pointer to a pointer that is to be fixed to be the value needed | |
for the new virtual address mappings being applied. | |
@retval EFI_SUCCESS The pointer pointed to by Address was modified. | |
@retval EFI_INVALID_PARAMETER 1) Address is NULL. | |
2) *Address is NULL and DebugDisposition does | |
not have the EFI_OPTIONAL_PTR bit set. | |
@retval EFI_NOT_FOUND The pointer pointed to by Address was not found to be part | |
of the current memory map. This is normally fatal. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_CONVERT_POINTER)( | |
IN UINTN DebugDisposition, | |
IN OUT VOID **Address | |
); | |
// | |
// These types can be ORed together as needed - for example, | |
// EVT_TIMER might be Ored with EVT_NOTIFY_WAIT or | |
// EVT_NOTIFY_SIGNAL. | |
// | |
#define EVT_TIMER 0x80000000 | |
#define EVT_RUNTIME 0x40000000 | |
#define EVT_NOTIFY_WAIT 0x00000100 | |
#define EVT_NOTIFY_SIGNAL 0x00000200 | |
#define EVT_SIGNAL_EXIT_BOOT_SERVICES 0x00000201 | |
#define EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE 0x60000202 | |
// | |
// The event's NotifyContext pointer points to a runtime memory | |
// address. | |
// The event is deprecated in UEFI2.0 and later specifications. | |
// | |
#define EVT_RUNTIME_CONTEXT 0x20000000 | |
/** | |
Invoke a notification event | |
@param[in] Event Event whose notification function is being invoked. | |
@param[in] Context The pointer to the notification function's context, | |
which is implementation-dependent. | |
**/ | |
typedef | |
VOID | |
(EFIAPI *EFI_EVENT_NOTIFY)( | |
IN EFI_EVENT Event, | |
IN VOID *Context | |
); | |
/** | |
Creates an event. | |
@param[in] Type The type of event to create and its mode and attributes. | |
@param[in] NotifyTpl The task priority level of event notifications, if needed. | |
@param[in] NotifyFunction The pointer to the event's notification function, if any. | |
@param[in] NotifyContext The pointer to the notification function's context; corresponds to parameter | |
Context in the notification function. | |
@param[out] Event The pointer to the newly created event if the call succeeds; undefined | |
otherwise. | |
@retval EFI_SUCCESS The event structure was created. | |
@retval EFI_INVALID_PARAMETER One or more parameters are invalid. | |
@retval EFI_OUT_OF_RESOURCES The event could not be allocated. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_CREATE_EVENT)( | |
IN UINT32 Type, | |
IN EFI_TPL NotifyTpl, | |
IN EFI_EVENT_NOTIFY NotifyFunction, | |
IN VOID *NotifyContext, | |
OUT EFI_EVENT *Event | |
); | |
/** | |
Creates an event in a group. | |
@param[in] Type The type of event to create and its mode and attributes. | |
@param[in] NotifyTpl The task priority level of event notifications,if needed. | |
@param[in] NotifyFunction The pointer to the event's notification function, if any. | |
@param[in] NotifyContext The pointer to the notification function's context; corresponds to parameter | |
Context in the notification function. | |
@param[in] EventGroup The pointer to the unique identifier of the group to which this event belongs. | |
If this is NULL, then the function behaves as if the parameters were passed | |
to CreateEvent. | |
@param[out] Event The pointer to the newly created event if the call succeeds; undefined | |
otherwise. | |
@retval EFI_SUCCESS The event structure was created. | |
@retval EFI_INVALID_PARAMETER One or more parameters are invalid. | |
@retval EFI_OUT_OF_RESOURCES The event could not be allocated. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_CREATE_EVENT_EX)( | |
IN UINT32 Type, | |
IN EFI_TPL NotifyTpl, | |
IN EFI_EVENT_NOTIFY NotifyFunction OPTIONAL, | |
IN CONST VOID *NotifyContext OPTIONAL, | |
IN CONST EFI_GUID *EventGroup OPTIONAL, | |
OUT EFI_EVENT *Event | |
); | |
/// | |
/// Timer delay types | |
/// | |
typedef enum { | |
/// | |
/// An event's timer settings is to be cancelled and not trigger time is to be set/ | |
/// | |
TimerCancel, | |
/// | |
/// An event is to be signaled periodically at a specified interval from the current time. | |
/// | |
TimerPeriodic, | |
/// | |
/// An event is to be signaled once at a specified interval from the current time. | |
/// | |
TimerRelative | |
} EFI_TIMER_DELAY; | |
/** | |
Sets the type of timer and the trigger time for a timer event. | |
@param[in] Event The timer event that is to be signaled at the specified time. | |
@param[in] Type The type of time that is specified in TriggerTime. | |
@param[in] TriggerTime The number of 100ns units until the timer expires. | |
A TriggerTime of 0 is legal. | |
If Type is TimerRelative and TriggerTime is 0, then the timer | |
event will be signaled on the next timer tick. | |
If Type is TimerPeriodic and TriggerTime is 0, then the timer | |
event will be signaled on every timer tick. | |
@retval EFI_SUCCESS The event has been set to be signaled at the requested time. | |
@retval EFI_INVALID_PARAMETER Event or Type is not valid. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_SET_TIMER)( | |
IN EFI_EVENT Event, | |
IN EFI_TIMER_DELAY Type, | |
IN UINT64 TriggerTime | |
); | |
/** | |
Signals an event. | |
@param[in] Event The event to signal. | |
@retval EFI_SUCCESS The event has been signaled. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_SIGNAL_EVENT)( | |
IN EFI_EVENT Event | |
); | |
/** | |
Stops execution until an event is signaled. | |
@param[in] NumberOfEvents The number of events in the Event array. | |
@param[in] Event An array of EFI_EVENT. | |
@param[out] Index The pointer to the index of the event which satisfied the wait condition. | |
@retval EFI_SUCCESS The event indicated by Index was signaled. | |
@retval EFI_INVALID_PARAMETER 1) NumberOfEvents is 0. | |
2) The event indicated by Index is of type | |
EVT_NOTIFY_SIGNAL. | |
@retval EFI_UNSUPPORTED The current TPL is not TPL_APPLICATION. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_WAIT_FOR_EVENT)( | |
IN UINTN NumberOfEvents, | |
IN EFI_EVENT *Event, | |
OUT UINTN *Index | |
); | |
/** | |
Closes an event. | |
@param[in] Event The event to close. | |
@retval EFI_SUCCESS The event has been closed. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_CLOSE_EVENT)( | |
IN EFI_EVENT Event | |
); | |
/** | |
Checks whether an event is in the signaled state. | |
@param[in] Event The event to check. | |
@retval EFI_SUCCESS The event is in the signaled state. | |
@retval EFI_NOT_READY The event is not in the signaled state. | |
@retval EFI_INVALID_PARAMETER Event is of type EVT_NOTIFY_SIGNAL. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_CHECK_EVENT)( | |
IN EFI_EVENT Event | |
); | |
// | |
// Task priority level | |
// | |
#define TPL_APPLICATION 4 | |
#define TPL_CALLBACK 8 | |
#define TPL_NOTIFY 16 | |
#define TPL_HIGH_LEVEL 31 | |
/** | |
Raises a task's priority level and returns its previous level. | |
@param[in] NewTpl The new task priority level. | |
@return Previous task priority level | |
**/ | |
typedef | |
EFI_TPL | |
(EFIAPI *EFI_RAISE_TPL)( | |
IN EFI_TPL NewTpl | |
); | |
/** | |
Restores a task's priority level to its previous value. | |
@param[in] OldTpl The previous task priority level to restore. | |
**/ | |
typedef | |
VOID | |
(EFIAPI *EFI_RESTORE_TPL)( | |
IN EFI_TPL OldTpl | |
); | |
/** | |
Returns the value of a variable. | |
@param[in] VariableName A Null-terminated string that is the name of the vendor's | |
variable. | |
@param[in] VendorGuid A unique identifier for the vendor. | |
@param[out] Attributes If not NULL, a pointer to the memory location to return the | |
attributes bitmask for the variable. | |
@param[in, out] DataSize On input, the size in bytes of the return Data buffer. | |
On output the size of data returned in Data. | |
@param[out] Data The buffer to return the contents of the variable. | |
@retval EFI_SUCCESS The function completed successfully. | |
@retval EFI_NOT_FOUND The variable was not found. | |
@retval EFI_BUFFER_TOO_SMALL The DataSize is too small for the result. | |
@retval EFI_INVALID_PARAMETER VariableName is NULL. | |
@retval EFI_INVALID_PARAMETER VendorGuid is NULL. | |
@retval EFI_INVALID_PARAMETER DataSize is NULL. | |
@retval EFI_INVALID_PARAMETER The DataSize is not too small and Data is NULL. | |
@retval EFI_DEVICE_ERROR The variable could not be retrieved due to a hardware error. | |
@retval EFI_SECURITY_VIOLATION The variable could not be retrieved due to an authentication failure. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_GET_VARIABLE)( | |
IN CHAR16 *VariableName, | |
IN EFI_GUID *VendorGuid, | |
OUT UINT32 *Attributes, OPTIONAL | |
IN OUT UINTN *DataSize, | |
OUT VOID *Data | |
); | |
/** | |
Enumerates the current variable names. | |
@param[in, out] VariableNameSize The size of the VariableName buffer. | |
@param[in, out] VariableName On input, supplies the last VariableName that was returned | |
by GetNextVariableName(). On output, returns the Nullterminated | |
string of the current variable. | |
@param[in, out] VendorGuid On input, supplies the last VendorGuid that was returned by | |
GetNextVariableName(). On output, returns the | |
VendorGuid of the current variable. | |
@retval EFI_SUCCESS The function completed successfully. | |
@retval EFI_NOT_FOUND The next variable was not found. | |
@retval EFI_BUFFER_TOO_SMALL The VariableNameSize is too small for the result. | |
@retval EFI_INVALID_PARAMETER VariableNameSize is NULL. | |
@retval EFI_INVALID_PARAMETER VariableName is NULL. | |
@retval EFI_INVALID_PARAMETER VendorGuid is NULL. | |
@retval EFI_DEVICE_ERROR The variable could not be retrieved due to a hardware error. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_GET_NEXT_VARIABLE_NAME)( | |
IN OUT UINTN *VariableNameSize, | |
IN OUT CHAR16 *VariableName, | |
IN OUT EFI_GUID *VendorGuid | |
); | |
/** | |
Sets the value of a variable. | |
@param[in] VariableName A Null-terminated string that is the name of the vendor's variable. | |
Each VariableName is unique for each VendorGuid. VariableName must | |
contain 1 or more characters. If VariableName is an empty string, | |
then EFI_INVALID_PARAMETER is returned. | |
@param[in] VendorGuid A unique identifier for the vendor. | |
@param[in] Attributes Attributes bitmask to set for the variable. | |
@param[in] DataSize The size in bytes of the Data buffer. Unless the EFI_VARIABLE_APPEND_WRITE, | |
EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS, or | |
EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS attribute is set, a size of zero | |
causes the variable to be deleted. When the EFI_VARIABLE_APPEND_WRITE attribute is | |
set, then a SetVariable() call with a DataSize of zero will not cause any change to | |
the variable value (the timestamp associated with the variable may be updated however | |
even if no new data value is provided,see the description of the | |
EFI_VARIABLE_AUTHENTICATION_2 descriptor below. In this case the DataSize will not | |
be zero since the EFI_VARIABLE_AUTHENTICATION_2 descriptor will be populated). | |
@param[in] Data The contents for the variable. | |
@retval EFI_SUCCESS The firmware has successfully stored the variable and its data as | |
defined by the Attributes. | |
@retval EFI_INVALID_PARAMETER An invalid combination of attribute bits, name, and GUID was supplied, or the | |
DataSize exceeds the maximum allowed. | |
@retval EFI_INVALID_PARAMETER VariableName is an empty string. | |
@retval EFI_OUT_OF_RESOURCES Not enough storage is available to hold the variable and its data. | |
@retval EFI_DEVICE_ERROR The variable could not be retrieved due to a hardware error. | |
@retval EFI_WRITE_PROTECTED The variable in question is read-only. | |
@retval EFI_WRITE_PROTECTED The variable in question cannot be deleted. | |
@retval EFI_SECURITY_VIOLATION The variable could not be written due to EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS | |
or EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACESS being set, but the AuthInfo | |
does NOT pass the validation check carried out by the firmware. | |
@retval EFI_NOT_FOUND The variable trying to be updated or deleted was not found. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_SET_VARIABLE)( | |
IN CHAR16 *VariableName, | |
IN EFI_GUID *VendorGuid, | |
IN UINT32 Attributes, | |
IN UINTN DataSize, | |
IN VOID *Data | |
); | |
/// | |
/// This provides the capabilities of the | |
/// real time clock device as exposed through the EFI interfaces. | |
/// | |
typedef struct { | |
/// | |
/// Provides the reporting resolution of the real-time clock device in | |
/// counts per second. For a normal PC-AT CMOS RTC device, this | |
/// value would be 1 Hz, or 1, to indicate that the device only reports | |
/// the time to the resolution of 1 second. | |
/// | |
UINT32 Resolution; | |
/// | |
/// Provides the timekeeping accuracy of the real-time clock in an | |
/// error rate of 1E-6 parts per million. For a clock with an accuracy | |
/// of 50 parts per million, the value in this field would be | |
/// 50,000,000. | |
/// | |
UINT32 Accuracy; | |
/// | |
/// A TRUE indicates that a time set operation clears the device's | |
/// time below the Resolution reporting level. A FALSE | |
/// indicates that the state below the Resolution level of the | |
/// device is not cleared when the time is set. Normal PC-AT CMOS | |
/// RTC devices set this value to FALSE. | |
/// | |
BOOLEAN SetsToZero; | |
} EFI_TIME_CAPABILITIES; | |
/** | |
Returns the current time and date information, and the time-keeping capabilities | |
of the hardware platform. | |
@param[out] Time A pointer to storage to receive a snapshot of the current time. | |
@param[out] Capabilities An optional pointer to a buffer to receive the real time clock | |
device's capabilities. | |
@retval EFI_SUCCESS The operation completed successfully. | |
@retval EFI_INVALID_PARAMETER Time is NULL. | |
@retval EFI_DEVICE_ERROR The time could not be retrieved due to hardware error. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_GET_TIME)( | |
OUT EFI_TIME *Time, | |
OUT EFI_TIME_CAPABILITIES *Capabilities OPTIONAL | |
); | |
/** | |
Sets the current local time and date information. | |
@param[in] Time A pointer to the current time. | |
@retval EFI_SUCCESS The operation completed successfully. | |
@retval EFI_INVALID_PARAMETER A time field is out of range. | |
@retval EFI_DEVICE_ERROR The time could not be set due due to hardware error. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_SET_TIME)( | |
IN EFI_TIME *Time | |
); | |
/** | |
Returns the current wakeup alarm clock setting. | |
@param[out] Enabled Indicates if the alarm is currently enabled or disabled. | |
@param[out] Pending Indicates if the alarm signal is pending and requires acknowledgement. | |
@param[out] Time The current alarm setting. | |
@retval EFI_SUCCESS The alarm settings were returned. | |
@retval EFI_INVALID_PARAMETER Enabled is NULL. | |
@retval EFI_INVALID_PARAMETER Pending is NULL. | |
@retval EFI_INVALID_PARAMETER Time is NULL. | |
@retval EFI_DEVICE_ERROR The wakeup time could not be retrieved due to a hardware error. | |
@retval EFI_UNSUPPORTED A wakeup timer is not supported on this platform. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_GET_WAKEUP_TIME)( | |
OUT BOOLEAN *Enabled, | |
OUT BOOLEAN *Pending, | |
OUT EFI_TIME *Time | |
); | |
/** | |
Sets the system wakeup alarm clock time. | |
@param[in] Enable Enable or disable the wakeup alarm. | |
@param[in] Time If Enable is TRUE, the time to set the wakeup alarm for. | |
If Enable is FALSE, then this parameter is optional, and may be NULL. | |
@retval EFI_SUCCESS If Enable is TRUE, then the wakeup alarm was enabled. If | |
Enable is FALSE, then the wakeup alarm was disabled. | |
@retval EFI_INVALID_PARAMETER A time field is out of range. | |
@retval EFI_DEVICE_ERROR The wakeup time could not be set due to a hardware error. | |
@retval EFI_UNSUPPORTED A wakeup timer is not supported on this platform. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_SET_WAKEUP_TIME)( | |
IN BOOLEAN Enable, | |
IN EFI_TIME *Time OPTIONAL | |
); | |
/** | |
Loads an EFI image into memory. | |
@param[in] BootPolicy If TRUE, indicates that the request originates from the boot | |
manager, and that the boot manager is attempting to load | |
FilePath as a boot selection. Ignored if SourceBuffer is | |
not NULL. | |
@param[in] ParentImageHandle The caller's image handle. | |
@param[in] DevicePath The DeviceHandle specific file path from which the image is | |
loaded. | |
@param[in] SourceBuffer If not NULL, a pointer to the memory location containing a copy | |
of the image to be loaded. | |
@param[in] SourceSize The size in bytes of SourceBuffer. Ignored if SourceBuffer is NULL. | |
@param[out] ImageHandle The pointer to the returned image handle that is created when the | |
image is successfully loaded. | |
@retval EFI_SUCCESS Image was loaded into memory correctly. | |
@retval EFI_NOT_FOUND Both SourceBuffer and DevicePath are NULL. | |
@retval EFI_INVALID_PARAMETER One or more parametes are invalid. | |
@retval EFI_UNSUPPORTED The image type is not supported. | |
@retval EFI_OUT_OF_RESOURCES Image was not loaded due to insufficient resources. | |
@retval EFI_LOAD_ERROR Image was not loaded because the image format was corrupt or not | |
understood. | |
@retval EFI_DEVICE_ERROR Image was not loaded because the device returned a read error. | |
@retval EFI_ACCESS_DENIED Image was not loaded because the platform policy prohibits the | |
image from being loaded. NULL is returned in *ImageHandle. | |
@retval EFI_SECURITY_VIOLATION Image was loaded and an ImageHandle was created with a | |
valid EFI_LOADED_IMAGE_PROTOCOL. However, the current | |
platform policy specifies that the image should not be started. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_IMAGE_LOAD)( | |
IN BOOLEAN BootPolicy, | |
IN EFI_HANDLE ParentImageHandle, | |
IN EFI_DEVICE_PATH_PROTOCOL *DevicePath, | |
IN VOID *SourceBuffer OPTIONAL, | |
IN UINTN SourceSize, | |
OUT EFI_HANDLE *ImageHandle | |
); | |
/** | |
Transfers control to a loaded image's entry point. | |
@param[in] ImageHandle Handle of image to be started. | |
@param[out] ExitDataSize The pointer to the size, in bytes, of ExitData. | |
@param[out] ExitData The pointer to a pointer to a data buffer that includes a Null-terminated | |
string, optionally followed by additional binary data. | |
@retval EFI_INVALID_PARAMETER ImageHandle is either an invalid image handle or the image | |
has already been initialized with StartImage. | |
@retval EFI_SECURITY_VIOLATION The current platform policy specifies that the image should not be started. | |
@return Exit code from image | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_IMAGE_START)( | |
IN EFI_HANDLE ImageHandle, | |
OUT UINTN *ExitDataSize, | |
OUT CHAR16 **ExitData OPTIONAL | |
); | |
/** | |
Terminates a loaded EFI image and returns control to boot services. | |
@param[in] ImageHandle Handle that identifies the image. This parameter is passed to the | |
image on entry. | |
@param[in] ExitStatus The image's exit code. | |
@param[in] ExitDataSize The size, in bytes, of ExitData. Ignored if ExitStatus is EFI_SUCCESS. | |
@param[in] ExitData The pointer to a data buffer that includes a Null-terminated string, | |
optionally followed by additional binary data. The string is a | |
description that the caller may use to further indicate the reason | |
for the image's exit. ExitData is only valid if ExitStatus | |
is something other than EFI_SUCCESS. The ExitData buffer | |
must be allocated by calling AllocatePool(). | |
@retval EFI_SUCCESS The image specified by ImageHandle was unloaded. | |
@retval EFI_INVALID_PARAMETER The image specified by ImageHandle has been loaded and | |
started with LoadImage() and StartImage(), but the | |
image is not the currently executing image. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_EXIT)( | |
IN EFI_HANDLE ImageHandle, | |
IN EFI_STATUS ExitStatus, | |
IN UINTN ExitDataSize, | |
IN CHAR16 *ExitData OPTIONAL | |
); | |
/** | |
Unloads an image. | |
@param[in] ImageHandle Handle that identifies the image to be unloaded. | |
@retval EFI_SUCCESS The image has been unloaded. | |
@retval EFI_INVALID_PARAMETER ImageHandle is not a valid image handle. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_IMAGE_UNLOAD)( | |
IN EFI_HANDLE ImageHandle | |
); | |
/** | |
Terminates all boot services. | |
@param[in] ImageHandle Handle that identifies the exiting image. | |
@param[in] MapKey Key to the latest memory map. | |
@retval EFI_SUCCESS Boot services have been terminated. | |
@retval EFI_INVALID_PARAMETER MapKey is incorrect. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_EXIT_BOOT_SERVICES)( | |
IN EFI_HANDLE ImageHandle, | |
IN UINTN MapKey | |
); | |
/** | |
Induces a fine-grained stall. | |
@param[in] Microseconds The number of microseconds to stall execution. | |
@retval EFI_SUCCESS Execution was stalled at least the requested number of | |
Microseconds. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_STALL)( | |
IN UINTN Microseconds | |
); | |
/** | |
Sets the system's watchdog timer. | |
@param[in] Timeout The number of seconds to set the watchdog timer to. | |
@param[in] WatchdogCode The numeric code to log on a watchdog timer timeout event. | |
@param[in] DataSize The size, in bytes, of WatchdogData. | |
@param[in] WatchdogData A data buffer that includes a Null-terminated string, optionally | |
followed by additional binary data. | |
@retval EFI_SUCCESS The timeout has been set. | |
@retval EFI_INVALID_PARAMETER The supplied WatchdogCode is invalid. | |
@retval EFI_UNSUPPORTED The system does not have a watchdog timer. | |
@retval EFI_DEVICE_ERROR The watchdog timer could not be programmed due to a hardware | |
error. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_SET_WATCHDOG_TIMER)( | |
IN UINTN Timeout, | |
IN UINT64 WatchdogCode, | |
IN UINTN DataSize, | |
IN CHAR16 *WatchdogData OPTIONAL | |
); | |
/// | |
/// Enumeration of reset types. | |
/// | |
typedef enum { | |
/// | |
/// Used to induce a system-wide reset. This sets all circuitry within the | |
/// system to its initial state. This type of reset is asynchronous to system | |
/// operation and operates withgout regard to cycle boundaries. EfiColdReset | |
/// is tantamount to a system power cycle. | |
/// | |
EfiResetCold, | |
/// | |
/// Used to induce a system-wide initialization. The processors are set to their | |
/// initial state, and pending cycles are not corrupted. If the system does | |
/// not support this reset type, then an EfiResetCold must be performed. | |
/// | |
EfiResetWarm, | |
/// | |
/// Used to induce an entry into a power state equivalent to the ACPI G2/S5 or G3 | |
/// state. If the system does not support this reset type, then when the system | |
/// is rebooted, it should exhibit the EfiResetCold attributes. | |
/// | |
EfiResetShutdown, | |
/// | |
/// Used to induce a system-wide reset. The exact type of the reset is defined by | |
/// the EFI_GUID that follows the Null-terminated Unicode string passed into | |
/// ResetData. If the platform does not recognize the EFI_GUID in ResetData the | |
/// platform must pick a supported reset type to perform. The platform may | |
/// optionally log the parameters from any non-normal reset that occurs. | |
/// | |
EfiResetPlatformSpecific | |
} EFI_RESET_TYPE; | |
/** | |
Resets the entire platform. | |
@param[in] ResetType The type of reset to perform. | |
@param[in] ResetStatus The status code for the reset. | |
@param[in] DataSize The size, in bytes, of WatchdogData. | |
@param[in] ResetData For a ResetType of EfiResetCold, EfiResetWarm, or | |
EfiResetShutdown the data buffer starts with a Null-terminated | |
string, optionally followed by additional binary data. | |
**/ | |
typedef | |
VOID | |
(EFIAPI *EFI_RESET_SYSTEM)( | |
IN EFI_RESET_TYPE ResetType, | |
IN EFI_STATUS ResetStatus, | |
IN UINTN DataSize, | |
IN VOID *ResetData OPTIONAL | |
); | |
/** | |
Returns a monotonically increasing count for the platform. | |
@param[out] Count The pointer to returned value. | |
@retval EFI_SUCCESS The next monotonic count was returned. | |
@retval EFI_INVALID_PARAMETER Count is NULL. | |
@retval EFI_DEVICE_ERROR The device is not functioning properly. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_GET_NEXT_MONOTONIC_COUNT)( | |
OUT UINT64 *Count | |
); | |
/** | |
Returns the next high 32 bits of the platform's monotonic counter. | |
@param[out] HighCount The pointer to returned value. | |
@retval EFI_SUCCESS The next high monotonic count was returned. | |
@retval EFI_INVALID_PARAMETER HighCount is NULL. | |
@retval EFI_DEVICE_ERROR The device is not functioning properly. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_GET_NEXT_HIGH_MONO_COUNT)( | |
OUT UINT32 *HighCount | |
); | |
/** | |
Computes and returns a 32-bit CRC for a data buffer. | |
@param[in] Data A pointer to the buffer on which the 32-bit CRC is to be computed. | |
@param[in] DataSize The number of bytes in the buffer Data. | |
@param[out] Crc32 The 32-bit CRC that was computed for the data buffer specified by Data | |
and DataSize. | |
@retval EFI_SUCCESS The 32-bit CRC was computed for the data buffer and returned in | |
Crc32. | |
@retval EFI_INVALID_PARAMETER Data is NULL. | |
@retval EFI_INVALID_PARAMETER Crc32 is NULL. | |
@retval EFI_INVALID_PARAMETER DataSize is 0. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_CALCULATE_CRC32)( | |
IN VOID *Data, | |
IN UINTN DataSize, | |
OUT UINT32 *Crc32 | |
); | |
/** | |
Copies the contents of one buffer to another buffer. | |
@param[in] Destination The pointer to the destination buffer of the memory copy. | |
@param[in] Source The pointer to the source buffer of the memory copy. | |
@param[in] Length Number of bytes to copy from Source to Destination. | |
**/ | |
typedef | |
VOID | |
(EFIAPI *EFI_COPY_MEM)( | |
IN VOID *Destination, | |
IN VOID *Source, | |
IN UINTN Length | |
); | |
/** | |
The SetMem() function fills a buffer with a specified value. | |
@param[in] Buffer The pointer to the buffer to fill. | |
@param[in] Size Number of bytes in Buffer to fill. | |
@param[in] Value Value to fill Buffer with. | |
**/ | |
typedef | |
VOID | |
(EFIAPI *EFI_SET_MEM)( | |
IN VOID *Buffer, | |
IN UINTN Size, | |
IN UINT8 Value | |
); | |
/// | |
/// Enumeration of EFI Interface Types | |
/// | |
typedef enum { | |
/// | |
/// Indicates that the supplied protocol interface is supplied in native form. | |
/// | |
EFI_NATIVE_INTERFACE | |
} EFI_INTERFACE_TYPE; | |
/** | |
Installs a protocol interface on a device handle. If the handle does not exist, it is created and added | |
to the list of handles in the system. InstallMultipleProtocolInterfaces() performs | |
more error checking than InstallProtocolInterface(), so it is recommended that | |
InstallMultipleProtocolInterfaces() be used in place of | |
InstallProtocolInterface() | |
@param[in, out] Handle A pointer to the EFI_HANDLE on which the interface is to be installed. | |
@param[in] Protocol The numeric ID of the protocol interface. | |
@param[in] InterfaceType Indicates whether Interface is supplied in native form. | |
@param[in] Interface A pointer to the protocol interface. | |
@retval EFI_SUCCESS The protocol interface was installed. | |
@retval EFI_OUT_OF_RESOURCES Space for a new handle could not be allocated. | |
@retval EFI_INVALID_PARAMETER Handle is NULL. | |
@retval EFI_INVALID_PARAMETER Protocol is NULL. | |
@retval EFI_INVALID_PARAMETER InterfaceType is not EFI_NATIVE_INTERFACE. | |
@retval EFI_INVALID_PARAMETER Protocol is already installed on the handle specified by Handle. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_INSTALL_PROTOCOL_INTERFACE)( | |
IN OUT EFI_HANDLE *Handle, | |
IN EFI_GUID *Protocol, | |
IN EFI_INTERFACE_TYPE InterfaceType, | |
IN VOID *Interface | |
); | |
/** | |
Installs one or more protocol interfaces into the boot services environment. | |
@param[in, out] Handle The pointer to a handle to install the new protocol interfaces on, | |
or a pointer to NULL if a new handle is to be allocated. | |
@param ... A variable argument list containing pairs of protocol GUIDs and protocol | |
interfaces. | |
@retval EFI_SUCCESS All the protocol interface was installed. | |
@retval EFI_OUT_OF_RESOURCES There was not enough memory in pool to install all the protocols. | |
@retval EFI_ALREADY_STARTED A Device Path Protocol instance was passed in that is already present in | |
the handle database. | |
@retval EFI_INVALID_PARAMETER Handle is NULL. | |
@retval EFI_INVALID_PARAMETER Protocol is already installed on the handle specified by Handle. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_INSTALL_MULTIPLE_PROTOCOL_INTERFACES)( | |
IN OUT EFI_HANDLE *Handle, | |
... | |
); | |
/** | |
Reinstalls a protocol interface on a device handle. | |
@param[in] Handle Handle on which the interface is to be reinstalled. | |
@param[in] Protocol The numeric ID of the interface. | |
@param[in] OldInterface A pointer to the old interface. NULL can be used if a structure is not | |
associated with Protocol. | |
@param[in] NewInterface A pointer to the new interface. | |
@retval EFI_SUCCESS The protocol interface was reinstalled. | |
@retval EFI_NOT_FOUND The OldInterface on the handle was not found. | |
@retval EFI_ACCESS_DENIED The protocol interface could not be reinstalled, | |
because OldInterface is still being used by a | |
driver that will not release it. | |
@retval EFI_INVALID_PARAMETER Handle is NULL. | |
@retval EFI_INVALID_PARAMETER Protocol is NULL. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_REINSTALL_PROTOCOL_INTERFACE)( | |
IN EFI_HANDLE Handle, | |
IN EFI_GUID *Protocol, | |
IN VOID *OldInterface, | |
IN VOID *NewInterface | |
); | |
/** | |
Removes a protocol interface from a device handle. It is recommended that | |
UninstallMultipleProtocolInterfaces() be used in place of | |
UninstallProtocolInterface(). | |
@param[in] Handle The handle on which the interface was installed. | |
@param[in] Protocol The numeric ID of the interface. | |
@param[in] Interface A pointer to the interface. | |
@retval EFI_SUCCESS The interface was removed. | |
@retval EFI_NOT_FOUND The interface was not found. | |
@retval EFI_ACCESS_DENIED The interface was not removed because the interface | |
is still being used by a driver. | |
@retval EFI_INVALID_PARAMETER Handle is NULL. | |
@retval EFI_INVALID_PARAMETER Protocol is NULL. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_UNINSTALL_PROTOCOL_INTERFACE)( | |
IN EFI_HANDLE Handle, | |
IN EFI_GUID *Protocol, | |
IN VOID *Interface | |
); | |
/** | |
Removes one or more protocol interfaces into the boot services environment. | |
@param[in] Handle The handle to remove the protocol interfaces from. | |
@param ... A variable argument list containing pairs of protocol GUIDs and | |
protocol interfaces. | |
@retval EFI_SUCCESS All the protocol interfaces were removed. | |
@retval EFI_INVALID_PARAMETER One of the protocol interfaces was not previously installed on Handle. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_UNINSTALL_MULTIPLE_PROTOCOL_INTERFACES)( | |
IN EFI_HANDLE Handle, | |
... | |
); | |
/** | |
Queries a handle to determine if it supports a specified protocol. | |
@param[in] Handle The handle being queried. | |
@param[in] Protocol The published unique identifier of the protocol. | |
@param[out] Interface Supplies the address where a pointer to the corresponding Protocol | |
Interface is returned. | |
@retval EFI_SUCCESS The interface information for the specified protocol was returned. | |
@retval EFI_UNSUPPORTED The device does not support the specified protocol. | |
@retval EFI_INVALID_PARAMETER Handle is NULL. | |
@retval EFI_INVALID_PARAMETER Protocol is NULL. | |
@retval EFI_INVALID_PARAMETER Interface is NULL. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_HANDLE_PROTOCOL)( | |
IN EFI_HANDLE Handle, | |
IN EFI_GUID *Protocol, | |
OUT VOID **Interface | |
); | |
#define EFI_OPEN_PROTOCOL_BY_HANDLE_PROTOCOL 0x00000001 | |
#define EFI_OPEN_PROTOCOL_GET_PROTOCOL 0x00000002 | |
#define EFI_OPEN_PROTOCOL_TEST_PROTOCOL 0x00000004 | |
#define EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER 0x00000008 | |
#define EFI_OPEN_PROTOCOL_BY_DRIVER 0x00000010 | |
#define EFI_OPEN_PROTOCOL_EXCLUSIVE 0x00000020 | |
/** | |
Queries a handle to determine if it supports a specified protocol. If the protocol is supported by the | |
handle, it opens the protocol on behalf of the calling agent. | |
@param[in] Handle The handle for the protocol interface that is being opened. | |
@param[in] Protocol The published unique identifier of the protocol. | |
@param[out] Interface Supplies the address where a pointer to the corresponding Protocol | |
Interface is returned. | |
@param[in] AgentHandle The handle of the agent that is opening the protocol interface | |
specified by Protocol and Interface. | |
@param[in] ControllerHandle If the agent that is opening a protocol is a driver that follows the | |
UEFI Driver Model, then this parameter is the controller handle | |
that requires the protocol interface. If the agent does not follow | |
the UEFI Driver Model, then this parameter is optional and may | |
be NULL. | |
@param[in] Attributes The open mode of the protocol interface specified by Handle | |
and Protocol. | |
@retval EFI_SUCCESS An item was added to the open list for the protocol interface, and the | |
protocol interface was returned in Interface. | |
@retval EFI_UNSUPPORTED Handle does not support Protocol. | |
@retval EFI_INVALID_PARAMETER One or more parameters are invalid. | |
@retval EFI_ACCESS_DENIED Required attributes can't be supported in current environment. | |
@retval EFI_ALREADY_STARTED Item on the open list already has requierd attributes whose agent | |
handle is the same as AgentHandle. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_OPEN_PROTOCOL)( | |
IN EFI_HANDLE Handle, | |
IN EFI_GUID *Protocol, | |
OUT VOID **Interface, OPTIONAL | |
IN EFI_HANDLE AgentHandle, | |
IN EFI_HANDLE ControllerHandle, | |
IN UINT32 Attributes | |
); | |
/** | |
Closes a protocol on a handle that was opened using OpenProtocol(). | |
@param[in] Handle The handle for the protocol interface that was previously opened | |
with OpenProtocol(), and is now being closed. | |
@param[in] Protocol The published unique identifier of the protocol. | |
@param[in] AgentHandle The handle of the agent that is closing the protocol interface. | |
@param[in] ControllerHandle If the agent that opened a protocol is a driver that follows the | |
UEFI Driver Model, then this parameter is the controller handle | |
that required the protocol interface. | |
@retval EFI_SUCCESS The protocol instance was closed. | |
@retval EFI_INVALID_PARAMETER 1) Handle is NULL. | |
2) AgentHandle is NULL. | |
3) ControllerHandle is not NULL and ControllerHandle is not a valid EFI_HANDLE. | |
4) Protocol is NULL. | |
@retval EFI_NOT_FOUND 1) Handle does not support the protocol specified by Protocol. | |
2) The protocol interface specified by Handle and Protocol is not | |
currently open by AgentHandle and ControllerHandle. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_CLOSE_PROTOCOL)( | |
IN EFI_HANDLE Handle, | |
IN EFI_GUID *Protocol, | |
IN EFI_HANDLE AgentHandle, | |
IN EFI_HANDLE ControllerHandle | |
); | |
/// | |
/// EFI Oprn Protocol Information Entry | |
/// | |
typedef struct { | |
EFI_HANDLE AgentHandle; | |
EFI_HANDLE ControllerHandle; | |
UINT32 Attributes; | |
UINT32 OpenCount; | |
} EFI_OPEN_PROTOCOL_INFORMATION_ENTRY; | |
/** | |
Retrieves the list of agents that currently have a protocol interface opened. | |
@param[in] Handle The handle for the protocol interface that is being queried. | |
@param[in] Protocol The published unique identifier of the protocol. | |
@param[out] EntryBuffer A pointer to a buffer of open protocol information in the form of | |
EFI_OPEN_PROTOCOL_INFORMATION_ENTRY structures. | |
@param[out] EntryCount A pointer to the number of entries in EntryBuffer. | |
@retval EFI_SUCCESS The open protocol information was returned in EntryBuffer, and the | |
number of entries was returned EntryCount. | |
@retval EFI_OUT_OF_RESOURCES There are not enough resources available to allocate EntryBuffer. | |
@retval EFI_NOT_FOUND Handle does not support the protocol specified by Protocol. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_OPEN_PROTOCOL_INFORMATION)( | |
IN EFI_HANDLE Handle, | |
IN EFI_GUID *Protocol, | |
OUT EFI_OPEN_PROTOCOL_INFORMATION_ENTRY **EntryBuffer, | |
OUT UINTN *EntryCount | |
); | |
/** | |
Retrieves the list of protocol interface GUIDs that are installed on a handle in a buffer allocated | |
from pool. | |
@param[in] Handle The handle from which to retrieve the list of protocol interface | |
GUIDs. | |
@param[out] ProtocolBuffer A pointer to the list of protocol interface GUID pointers that are | |
installed on Handle. | |
@param[out] ProtocolBufferCount A pointer to the number of GUID pointers present in | |
ProtocolBuffer. | |
@retval EFI_SUCCESS The list of protocol interface GUIDs installed on Handle was returned in | |
ProtocolBuffer. The number of protocol interface GUIDs was | |
returned in ProtocolBufferCount. | |
@retval EFI_OUT_OF_RESOURCES There is not enough pool memory to store the results. | |
@retval EFI_INVALID_PARAMETER Handle is NULL. | |
@retval EFI_INVALID_PARAMETER Handle is not a valid EFI_HANDLE. | |
@retval EFI_INVALID_PARAMETER ProtocolBuffer is NULL. | |
@retval EFI_INVALID_PARAMETER ProtocolBufferCount is NULL. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_PROTOCOLS_PER_HANDLE)( | |
IN EFI_HANDLE Handle, | |
OUT EFI_GUID ***ProtocolBuffer, | |
OUT UINTN *ProtocolBufferCount | |
); | |
/** | |
Creates an event that is to be signaled whenever an interface is installed for a specified protocol. | |
@param[in] Protocol The numeric ID of the protocol for which the event is to be registered. | |
@param[in] Event Event that is to be signaled whenever a protocol interface is registered | |
for Protocol. | |
@param[out] Registration A pointer to a memory location to receive the registration value. | |
@retval EFI_SUCCESS The notification event has been registered. | |
@retval EFI_OUT_OF_RESOURCES Space for the notification event could not be allocated. | |
@retval EFI_INVALID_PARAMETER Protocol is NULL. | |
@retval EFI_INVALID_PARAMETER Event is NULL. | |
@retval EFI_INVALID_PARAMETER Registration is NULL. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_REGISTER_PROTOCOL_NOTIFY)( | |
IN EFI_GUID *Protocol, | |
IN EFI_EVENT Event, | |
OUT VOID **Registration | |
); | |
/// | |
/// Enumeration of EFI Locate Search Types | |
/// | |
typedef enum { | |
/// | |
/// Retrieve all the handles in the handle database. | |
/// | |
AllHandles, | |
/// | |
/// Retrieve the next handle fron a RegisterProtocolNotify() event. | |
/// | |
ByRegisterNotify, | |
/// | |
/// Retrieve the set of handles from the handle database that support a | |
/// specified protocol. | |
/// | |
ByProtocol | |
} EFI_LOCATE_SEARCH_TYPE; | |
/** | |
Returns an array of handles that support a specified protocol. | |
@param[in] SearchType Specifies which handle(s) are to be returned. | |
@param[in] Protocol Specifies the protocol to search by. | |
@param[in] SearchKey Specifies the search key. | |
@param[in, out] BufferSize On input, the size in bytes of Buffer. On output, the size in bytes of | |
the array returned in Buffer (if the buffer was large enough) or the | |
size, in bytes, of the buffer needed to obtain the array (if the buffer was | |
not large enough). | |
@param[out] Buffer The buffer in which the array is returned. | |
@retval EFI_SUCCESS The array of handles was returned. | |
@retval EFI_NOT_FOUND No handles match the search. | |
@retval EFI_BUFFER_TOO_SMALL The BufferSize is too small for the result. | |
@retval EFI_INVALID_PARAMETER SearchType is not a member of EFI_LOCATE_SEARCH_TYPE. | |
@retval EFI_INVALID_PARAMETER SearchType is ByRegisterNotify and SearchKey is NULL. | |
@retval EFI_INVALID_PARAMETER SearchType is ByProtocol and Protocol is NULL. | |
@retval EFI_INVALID_PARAMETER One or more matches are found and BufferSize is NULL. | |
@retval EFI_INVALID_PARAMETER BufferSize is large enough for the result and Buffer is NULL. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_LOCATE_HANDLE)( | |
IN EFI_LOCATE_SEARCH_TYPE SearchType, | |
IN EFI_GUID *Protocol, OPTIONAL | |
IN VOID *SearchKey, OPTIONAL | |
IN OUT UINTN *BufferSize, | |
OUT EFI_HANDLE *Buffer | |
); | |
/** | |
Locates the handle to a device on the device path that supports the specified protocol. | |
@param[in] Protocol Specifies the protocol to search for. | |
@param[in, out] DevicePath On input, a pointer to a pointer to the device path. On output, the device | |
path pointer is modified to point to the remaining part of the device | |
path. | |
@param[out] Device A pointer to the returned device handle. | |
@retval EFI_SUCCESS The resulting handle was returned. | |
@retval EFI_NOT_FOUND No handles match the search. | |
@retval EFI_INVALID_PARAMETER Protocol is NULL. | |
@retval EFI_INVALID_PARAMETER DevicePath is NULL. | |
@retval EFI_INVALID_PARAMETER A handle matched the search and Device is NULL. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_LOCATE_DEVICE_PATH)( | |
IN EFI_GUID *Protocol, | |
IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath, | |
OUT EFI_HANDLE *Device | |
); | |
/** | |
Adds, updates, or removes a configuration table entry from the EFI System Table. | |
@param[in] Guid A pointer to the GUID for the entry to add, update, or remove. | |
@param[in] Table A pointer to the configuration table for the entry to add, update, or | |
remove. May be NULL. | |
@retval EFI_SUCCESS The (Guid, Table) pair was added, updated, or removed. | |
@retval EFI_NOT_FOUND An attempt was made to delete a nonexistent entry. | |
@retval EFI_INVALID_PARAMETER Guid is NULL. | |
@retval EFI_OUT_OF_RESOURCES There is not enough memory available to complete the operation. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_INSTALL_CONFIGURATION_TABLE)( | |
IN EFI_GUID *Guid, | |
IN VOID *Table | |
); | |
/** | |
Returns an array of handles that support the requested protocol in a buffer allocated from pool. | |
@param[in] SearchType Specifies which handle(s) are to be returned. | |
@param[in] Protocol Provides the protocol to search by. | |
This parameter is only valid for a SearchType of ByProtocol. | |
@param[in] SearchKey Supplies the search key depending on the SearchType. | |
@param[in, out] NoHandles The number of handles returned in Buffer. | |
@param[out] Buffer A pointer to the buffer to return the requested array of handles that | |
support Protocol. | |
@retval EFI_SUCCESS The array of handles was returned in Buffer, and the number of | |
handles in Buffer was returned in NoHandles. | |
@retval EFI_NOT_FOUND No handles match the search. | |
@retval EFI_OUT_OF_RESOURCES There is not enough pool memory to store the matching results. | |
@retval EFI_INVALID_PARAMETER NoHandles is NULL. | |
@retval EFI_INVALID_PARAMETER Buffer is NULL. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_LOCATE_HANDLE_BUFFER)( | |
IN EFI_LOCATE_SEARCH_TYPE SearchType, | |
IN EFI_GUID *Protocol, OPTIONAL | |
IN VOID *SearchKey, OPTIONAL | |
IN OUT UINTN *NoHandles, | |
OUT EFI_HANDLE **Buffer | |
); | |
/** | |
Returns the first protocol instance that matches the given protocol. | |
@param[in] Protocol Provides the protocol to search for. | |
@param[in] Registration Optional registration key returned from | |
RegisterProtocolNotify(). | |
@param[out] Interface On return, a pointer to the first interface that matches Protocol and | |
Registration. | |
@retval EFI_SUCCESS A protocol instance matching Protocol was found and returned in | |
Interface. | |
@retval EFI_NOT_FOUND No protocol instances were found that match Protocol and | |
Registration. | |
@retval EFI_INVALID_PARAMETER Interface is NULL. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_LOCATE_PROTOCOL)( | |
IN EFI_GUID *Protocol, | |
IN VOID *Registration, OPTIONAL | |
OUT VOID **Interface | |
); | |
/// | |
/// EFI Capsule Block Descriptor | |
/// | |
typedef struct { | |
/// | |
/// Length in bytes of the data pointed to by DataBlock/ContinuationPointer. | |
/// | |
UINT64 Length; | |
union { | |
/// | |
/// Physical address of the data block. This member of the union is | |
/// used if Length is not equal to zero. | |
/// | |
EFI_PHYSICAL_ADDRESS DataBlock; | |
/// | |
/// Physical address of another block of | |
/// EFI_CAPSULE_BLOCK_DESCRIPTOR structures. This | |
/// member of the union is used if Length is equal to zero. If | |
/// ContinuationPointer is zero this entry represents the end of the list. | |
/// | |
EFI_PHYSICAL_ADDRESS ContinuationPointer; | |
} Union; | |
} EFI_CAPSULE_BLOCK_DESCRIPTOR; | |
/// | |
/// EFI Capsule Header. | |
/// | |
typedef struct { | |
/// | |
/// A GUID that defines the contents of a capsule. | |
/// | |
EFI_GUID CapsuleGuid; | |
/// | |
/// The size of the capsule header. This may be larger than the size of | |
/// the EFI_CAPSULE_HEADER since CapsuleGuid may imply | |
/// extended header entries | |
/// | |
UINT32 HeaderSize; | |
/// | |
/// Bit-mapped list describing the capsule attributes. The Flag values | |
/// of 0x0000 - 0xFFFF are defined by CapsuleGuid. Flag values | |
/// of 0x10000 - 0xFFFFFFFF are defined by this specification | |
/// | |
UINT32 Flags; | |
/// | |
/// Size in bytes of the capsule. | |
/// | |
UINT32 CapsuleImageSize; | |
} EFI_CAPSULE_HEADER; | |
/// | |
/// The EFI System Table entry must point to an array of capsules | |
/// that contain the same CapsuleGuid value. The array must be | |
/// prefixed by a UINT32 that represents the size of the array of capsules. | |
/// | |
typedef struct { | |
/// | |
/// the size of the array of capsules. | |
/// | |
UINT32 CapsuleArrayNumber; | |
/// | |
/// Point to an array of capsules that contain the same CapsuleGuid value. | |
/// | |
VOID* CapsulePtr[1]; | |
} EFI_CAPSULE_TABLE; | |
#define CAPSULE_FLAGS_PERSIST_ACROSS_RESET 0x00010000 | |
#define CAPSULE_FLAGS_POPULATE_SYSTEM_TABLE 0x00020000 | |
#define CAPSULE_FLAGS_INITIATE_RESET 0x00040000 | |
/** | |
Passes capsules to the firmware with both virtual and physical mapping. Depending on the intended | |
consumption, the firmware may process the capsule immediately. If the payload should persist | |
across a system reset, the reset value returned from EFI_QueryCapsuleCapabilities must | |
be passed into ResetSystem() and will cause the capsule to be processed by the firmware as | |
part of the reset process. | |
@param[in] CapsuleHeaderArray Virtual pointer to an array of virtual pointers to the capsules | |
being passed into update capsule. | |
@param[in] CapsuleCount Number of pointers to EFI_CAPSULE_HEADER in | |
CaspuleHeaderArray. | |
@param[in] ScatterGatherList Physical pointer to a set of | |
EFI_CAPSULE_BLOCK_DESCRIPTOR that describes the | |
location in physical memory of a set of capsules. | |
@retval EFI_SUCCESS Valid capsule was passed. If | |
CAPSULE_FLAGS_PERSIT_ACROSS_RESET is not set, the | |
capsule has been successfully processed by the firmware. | |
@retval EFI_INVALID_PARAMETER CapsuleSize is NULL, or an incompatible set of flags were | |
set in the capsule header. | |
@retval EFI_INVALID_PARAMETER CapsuleCount is 0. | |
@retval EFI_DEVICE_ERROR The capsule update was started, but failed due to a device error. | |
@retval EFI_UNSUPPORTED The capsule type is not supported on this platform. | |
@retval EFI_OUT_OF_RESOURCES When ExitBootServices() has been previously called this error indicates the capsule | |
is compatible with this platform but is not capable of being submitted or processed | |
in runtime. The caller may resubmit the capsule prior to ExitBootServices(). | |
@retval EFI_OUT_OF_RESOURCES When ExitBootServices() has not been previously called then this error indicates | |
the capsule is compatible with this platform but there are insufficient resources to process. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_UPDATE_CAPSULE)( | |
IN EFI_CAPSULE_HEADER **CapsuleHeaderArray, | |
IN UINTN CapsuleCount, | |
IN EFI_PHYSICAL_ADDRESS ScatterGatherList OPTIONAL | |
); | |
/** | |
Returns if the capsule can be supported via UpdateCapsule(). | |
@param[in] CapsuleHeaderArray Virtual pointer to an array of virtual pointers to the capsules | |
being passed into update capsule. | |
@param[in] CapsuleCount Number of pointers to EFI_CAPSULE_HEADER in | |
CaspuleHeaderArray. | |
@param[out] MaxiumCapsuleSize On output the maximum size that UpdateCapsule() can | |
support as an argument to UpdateCapsule() via | |
CapsuleHeaderArray and ScatterGatherList. | |
@param[out] ResetType Returns the type of reset required for the capsule update. | |
@retval EFI_SUCCESS Valid answer returned. | |
@retval EFI_UNSUPPORTED The capsule type is not supported on this platform, and | |
MaximumCapsuleSize and ResetType are undefined. | |
@retval EFI_INVALID_PARAMETER MaximumCapsuleSize is NULL. | |
@retval EFI_OUT_OF_RESOURCES When ExitBootServices() has been previously called this error indicates the capsule | |
is compatible with this platform but is not capable of being submitted or processed | |
in runtime. The caller may resubmit the capsule prior to ExitBootServices(). | |
@retval EFI_OUT_OF_RESOURCES When ExitBootServices() has not been previously called then this error indicates | |
the capsule is compatible with this platform but there are insufficient resources to process. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_QUERY_CAPSULE_CAPABILITIES)( | |
IN EFI_CAPSULE_HEADER **CapsuleHeaderArray, | |
IN UINTN CapsuleCount, | |
OUT UINT64 *MaximumCapsuleSize, | |
OUT EFI_RESET_TYPE *ResetType | |
); | |
/** | |
Returns information about the EFI variables. | |
@param[in] Attributes Attributes bitmask to specify the type of variables on | |
which to return information. | |
@param[out] MaximumVariableStorageSize On output the maximum size of the storage space | |
available for the EFI variables associated with the | |
attributes specified. | |
@param[out] RemainingVariableStorageSize Returns the remaining size of the storage space | |
available for the EFI variables associated with the | |
attributes specified. | |
@param[out] MaximumVariableSize Returns the maximum size of the individual EFI | |
variables associated with the attributes specified. | |
@retval EFI_SUCCESS Valid answer returned. | |
@retval EFI_INVALID_PARAMETER An invalid combination of attribute bits was supplied | |
@retval EFI_UNSUPPORTED The attribute is not supported on this platform, and the | |
MaximumVariableStorageSize, | |
RemainingVariableStorageSize, MaximumVariableSize | |
are undefined. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_QUERY_VARIABLE_INFO)( | |
IN UINT32 Attributes, | |
OUT UINT64 *MaximumVariableStorageSize, | |
OUT UINT64 *RemainingVariableStorageSize, | |
OUT UINT64 *MaximumVariableSize | |
); | |
// | |
// Firmware should stop at a firmware user interface on next boot | |
// | |
#define EFI_OS_INDICATIONS_BOOT_TO_FW_UI 0x0000000000000001 | |
#define EFI_OS_INDICATIONS_TIMESTAMP_REVOCATION 0x0000000000000002 | |
#define EFI_OS_INDICATIONS_FILE_CAPSULE_DELIVERY_SUPPORTED 0x0000000000000004 | |
#define EFI_OS_INDICATIONS_FMP_CAPSULE_SUPPORTED 0x0000000000000008 | |
#define EFI_OS_INDICATIONS_CAPSULE_RESULT_VAR_SUPPORTED 0x0000000000000010 | |
// | |
// EFI Runtime Services Table | |
// | |
#define EFI_SYSTEM_TABLE_SIGNATURE SIGNATURE_64 ('I','B','I',' ','S','Y','S','T') | |
#define EFI_2_40_SYSTEM_TABLE_REVISION ((2 << 16) | (40)) | |
#define EFI_2_31_SYSTEM_TABLE_REVISION ((2 << 16) | (31)) | |
#define EFI_2_30_SYSTEM_TABLE_REVISION ((2 << 16) | (30)) | |
#define EFI_2_20_SYSTEM_TABLE_REVISION ((2 << 16) | (20)) | |
#define EFI_2_10_SYSTEM_TABLE_REVISION ((2 << 16) | (10)) | |
#define EFI_2_00_SYSTEM_TABLE_REVISION ((2 << 16) | (00)) | |
#define EFI_1_10_SYSTEM_TABLE_REVISION ((1 << 16) | (10)) | |
#define EFI_1_02_SYSTEM_TABLE_REVISION ((1 << 16) | (02)) | |
#define EFI_SYSTEM_TABLE_REVISION EFI_2_40_SYSTEM_TABLE_REVISION | |
#define EFI_SPECIFICATION_VERSION EFI_SYSTEM_TABLE_REVISION | |
#define EFI_RUNTIME_SERVICES_SIGNATURE SIGNATURE_64 ('R','U','N','T','S','E','R','V') | |
#define EFI_RUNTIME_SERVICES_REVISION EFI_SPECIFICATION_VERSION | |
/// | |
/// EFI Runtime Services Table. | |
/// | |
typedef struct { | |
/// | |
/// The table header for the EFI Runtime Services Table. | |
/// | |
EFI_TABLE_HEADER Hdr; | |
// | |
// Time Services | |
// | |
EFI_GET_TIME GetTime; | |
EFI_SET_TIME SetTime; | |
EFI_GET_WAKEUP_TIME GetWakeupTime; | |
EFI_SET_WAKEUP_TIME SetWakeupTime; | |
// | |
// Virtual Memory Services | |
// | |
EFI_SET_VIRTUAL_ADDRESS_MAP SetVirtualAddressMap; | |
EFI_CONVERT_POINTER ConvertPointer; | |
// | |
// Variable Services | |
// | |
EFI_GET_VARIABLE GetVariable; | |
EFI_GET_NEXT_VARIABLE_NAME GetNextVariableName; | |
EFI_SET_VARIABLE SetVariable; | |
// | |
// Miscellaneous Services | |
// | |
EFI_GET_NEXT_HIGH_MONO_COUNT GetNextHighMonotonicCount; | |
EFI_RESET_SYSTEM ResetSystem; | |
// | |
// UEFI 2.0 Capsule Services | |
// | |
EFI_UPDATE_CAPSULE UpdateCapsule; | |
EFI_QUERY_CAPSULE_CAPABILITIES QueryCapsuleCapabilities; | |
// | |
// Miscellaneous UEFI 2.0 Service | |
// | |
EFI_QUERY_VARIABLE_INFO QueryVariableInfo; | |
} EFI_RUNTIME_SERVICES; | |
#define EFI_BOOT_SERVICES_SIGNATURE SIGNATURE_64 ('B','O','O','T','S','E','R','V') | |
#define EFI_BOOT_SERVICES_REVISION EFI_SPECIFICATION_VERSION | |
/// | |
/// EFI Boot Services Table. | |
/// | |
typedef struct { | |
/// | |
/// The table header for the EFI Boot Services Table. | |
/// | |
EFI_TABLE_HEADER Hdr; | |
// | |
// Task Priority Services | |
// | |
EFI_RAISE_TPL RaiseTPL; | |
EFI_RESTORE_TPL RestoreTPL; | |
// | |
// Memory Services | |
// | |
EFI_ALLOCATE_PAGES AllocatePages; | |
EFI_FREE_PAGES FreePages; | |
EFI_GET_MEMORY_MAP GetMemoryMap; | |
EFI_ALLOCATE_POOL AllocatePool; | |
EFI_FREE_POOL FreePool; | |
// | |
// Event & Timer Services | |
// | |
EFI_CREATE_EVENT CreateEvent; | |
EFI_SET_TIMER SetTimer; | |
EFI_WAIT_FOR_EVENT WaitForEvent; | |
EFI_SIGNAL_EVENT SignalEvent; | |
EFI_CLOSE_EVENT CloseEvent; | |
EFI_CHECK_EVENT CheckEvent; | |
// | |
// Protocol Handler Services | |
// | |
EFI_INSTALL_PROTOCOL_INTERFACE InstallProtocolInterface; | |
EFI_REINSTALL_PROTOCOL_INTERFACE ReinstallProtocolInterface; | |
EFI_UNINSTALL_PROTOCOL_INTERFACE UninstallProtocolInterface; | |
EFI_HANDLE_PROTOCOL HandleProtocol; | |
VOID *Reserved; | |
EFI_REGISTER_PROTOCOL_NOTIFY RegisterProtocolNotify; | |
EFI_LOCATE_HANDLE LocateHandle; | |
EFI_LOCATE_DEVICE_PATH LocateDevicePath; | |
EFI_INSTALL_CONFIGURATION_TABLE InstallConfigurationTable; | |
// | |
// Image Services | |
// | |
EFI_IMAGE_LOAD LoadImage; | |
EFI_IMAGE_START StartImage; | |
EFI_EXIT Exit; | |
EFI_IMAGE_UNLOAD UnloadImage; | |
EFI_EXIT_BOOT_SERVICES ExitBootServices; | |
// | |
// Miscellaneous Services | |
// | |
EFI_GET_NEXT_MONOTONIC_COUNT GetNextMonotonicCount; | |
EFI_STALL Stall; | |
EFI_SET_WATCHDOG_TIMER SetWatchdogTimer; | |
// | |
// DriverSupport Services | |
// | |
EFI_CONNECT_CONTROLLER ConnectController; | |
EFI_DISCONNECT_CONTROLLER DisconnectController; | |
// | |
// Open and Close Protocol Services | |
// | |
EFI_OPEN_PROTOCOL OpenProtocol; | |
EFI_CLOSE_PROTOCOL CloseProtocol; | |
EFI_OPEN_PROTOCOL_INFORMATION OpenProtocolInformation; | |
// | |
// Library Services | |
// | |
EFI_PROTOCOLS_PER_HANDLE ProtocolsPerHandle; | |
EFI_LOCATE_HANDLE_BUFFER LocateHandleBuffer; | |
EFI_LOCATE_PROTOCOL LocateProtocol; | |
EFI_INSTALL_MULTIPLE_PROTOCOL_INTERFACES InstallMultipleProtocolInterfaces; | |
EFI_UNINSTALL_MULTIPLE_PROTOCOL_INTERFACES UninstallMultipleProtocolInterfaces; | |
// | |
// 32-bit CRC Services | |
// | |
EFI_CALCULATE_CRC32 CalculateCrc32; | |
// | |
// Miscellaneous Services | |
// | |
EFI_COPY_MEM CopyMem; | |
EFI_SET_MEM SetMem; | |
EFI_CREATE_EVENT_EX CreateEventEx; | |
} EFI_BOOT_SERVICES; | |
/// | |
/// Contains a set of GUID/pointer pairs comprised of the ConfigurationTable field in the | |
/// EFI System Table. | |
/// | |
typedef struct { | |
/// | |
/// The 128-bit GUID value that uniquely identifies the system configuration table. | |
/// | |
EFI_GUID VendorGuid; | |
/// | |
/// A pointer to the table associated with VendorGuid. | |
/// | |
VOID *VendorTable; | |
} EFI_CONFIGURATION_TABLE; | |
/// | |
/// EFI System Table | |
/// | |
typedef struct { | |
/// | |
/// The table header for the EFI System Table. | |
/// | |
EFI_TABLE_HEADER Hdr; | |
/// | |
/// A pointer to a null terminated string that identifies the vendor | |
/// that produces the system firmware for the platform. | |
/// | |
CHAR16 *FirmwareVendor; | |
/// | |
/// A firmware vendor specific value that identifies the revision | |
/// of the system firmware for the platform. | |
/// | |
UINT32 FirmwareRevision; | |
/// | |
/// The handle for the active console input device. This handle must support | |
/// EFI_SIMPLE_TEXT_INPUT_PROTOCOL and EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL. | |
/// | |
EFI_HANDLE ConsoleInHandle; | |
/// | |
/// A pointer to the EFI_SIMPLE_TEXT_INPUT_PROTOCOL interface that is | |
/// associated with ConsoleInHandle. | |
/// | |
EFI_SIMPLE_TEXT_INPUT_PROTOCOL *ConIn; | |
/// | |
/// The handle for the active console output device. | |
/// | |
EFI_HANDLE ConsoleOutHandle; | |
/// | |
/// A pointer to the EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL interface | |
/// that is associated with ConsoleOutHandle. | |
/// | |
EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *ConOut; | |
/// | |
/// The handle for the active standard error console device. | |
/// This handle must support the EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL. | |
/// | |
EFI_HANDLE StandardErrorHandle; | |
/// | |
/// A pointer to the EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL interface | |
/// that is associated with StandardErrorHandle. | |
/// | |
EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *StdErr; | |
/// | |
/// A pointer to the EFI Runtime Services Table. | |
/// | |
EFI_RUNTIME_SERVICES *RuntimeServices; | |
/// | |
/// A pointer to the EFI Boot Services Table. | |
/// | |
EFI_BOOT_SERVICES *BootServices; | |
/// | |
/// The number of system configuration tables in the buffer ConfigurationTable. | |
/// | |
UINTN NumberOfTableEntries; | |
/// | |
/// A pointer to the system configuration tables. | |
/// The number of entries in the table is NumberOfTableEntries. | |
/// | |
EFI_CONFIGURATION_TABLE *ConfigurationTable; | |
} EFI_SYSTEM_TABLE; | |
/** | |
This is the declaration of an EFI image entry point. This entry point is | |
the same for UEFI Applications, UEFI OS Loaders, and UEFI Drivers including | |
both device drivers and bus drivers. | |
@param[in] ImageHandle The firmware allocated handle for the UEFI image. | |
@param[in] SystemTable A pointer to the EFI System Table. | |
@retval EFI_SUCCESS The operation completed successfully. | |
@retval Others An unexpected error occurred. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EFI_IMAGE_ENTRY_POINT)( | |
IN EFI_HANDLE ImageHandle, | |
IN EFI_SYSTEM_TABLE *SystemTable | |
); | |
// | |
// EFI Load Options Attributes | |
// | |
#define LOAD_OPTION_ACTIVE 0x00000001 | |
#define LOAD_OPTION_FORCE_RECONNECT 0x00000002 | |
#define LOAD_OPTION_HIDDEN 0x00000008 | |
#define LOAD_OPTION_CATEGORY 0x00001F00 | |
#define LOAD_OPTION_CATEGORY_BOOT 0x00000000 | |
#define LOAD_OPTION_CATEGORY_APP 0x00000100 | |
#define EFI_BOOT_OPTION_SUPPORT_KEY 0x00000001 | |
#define EFI_BOOT_OPTION_SUPPORT_APP 0x00000002 | |
#define EFI_BOOT_OPTION_SUPPORT_COUNT 0x00000300 | |
/// | |
/// EFI Boot Key Data | |
/// | |
typedef union { | |
struct { | |
/// | |
/// Indicates the revision of the EFI_KEY_OPTION structure. This revision level should be 0. | |
/// | |
UINT32 Revision : 8; | |
/// | |
/// Either the left or right Shift keys must be pressed (1) or must not be pressed (0). | |
/// | |
UINT32 ShiftPressed : 1; | |
/// | |
/// Either the left or right Control keys must be pressed (1) or must not be pressed (0). | |
/// | |
UINT32 ControlPressed : 1; | |
/// | |
/// Either the left or right Alt keys must be pressed (1) or must not be pressed (0). | |
/// | |
UINT32 AltPressed : 1; | |
/// | |
/// Either the left or right Logo keys must be pressed (1) or must not be pressed (0). | |
/// | |
UINT32 LogoPressed : 1; | |
/// | |
/// The Menu key must be pressed (1) or must not be pressed (0). | |
/// | |
UINT32 MenuPressed : 1; | |
/// | |
/// The SysReq key must be pressed (1) or must not be pressed (0). | |
/// | |
UINT32 SysReqPressed : 1; | |
UINT32 Reserved : 16; | |
/// | |
/// Specifies the actual number of entries in EFI_KEY_OPTION.Keys, from 0-3. If | |
/// zero, then only the shift state is considered. If more than one, then the boot option will | |
/// only be launched if all of the specified keys are pressed with the same shift state. | |
/// | |
UINT32 InputKeyCount : 2; | |
} Options; | |
UINT32 PackedValue; | |
} EFI_BOOT_KEY_DATA; | |
/// | |
/// EFI Key Option. | |
/// | |
#pragma pack(1) | |
typedef struct { | |
/// | |
/// Specifies options about how the key will be processed. | |
/// | |
EFI_BOOT_KEY_DATA KeyData; | |
/// | |
/// The CRC-32 which should match the CRC-32 of the entire EFI_LOAD_OPTION to | |
/// which BootOption refers. If the CRC-32s do not match this value, then this key | |
/// option is ignored. | |
/// | |
UINT32 BootOptionCrc; | |
/// | |
/// The Boot#### option which will be invoked if this key is pressed and the boot option | |
/// is active (LOAD_OPTION_ACTIVE is set). | |
/// | |
UINT16 BootOption; | |
/// | |
/// The key codes to compare against those returned by the | |
/// EFI_SIMPLE_TEXT_INPUT and EFI_SIMPLE_TEXT_INPUT_EX protocols. | |
/// The number of key codes (0-3) is specified by the EFI_KEY_CODE_COUNT field in KeyOptions. | |
/// | |
//EFI_INPUT_KEY Keys[]; | |
} EFI_KEY_OPTION; | |
#pragma pack() | |
// | |
// EFI File location to boot from on removable media devices | |
// | |
#define EFI_REMOVABLE_MEDIA_FILE_NAME_IA32 L"\\EFI\\BOOT\\BOOTIA32.EFI" | |
#define EFI_REMOVABLE_MEDIA_FILE_NAME_IA64 L"\\EFI\\BOOT\\BOOTIA64.EFI" | |
#define EFI_REMOVABLE_MEDIA_FILE_NAME_X64 L"\\EFI\\BOOT\\BOOTX64.EFI" | |
#define EFI_REMOVABLE_MEDIA_FILE_NAME_ARM L"\\EFI\\BOOT\\BOOTARM.EFI" | |
#define EFI_REMOVABLE_MEDIA_FILE_NAME_AARCH64 L"\\EFI\\BOOT\\BOOTAA64.EFI" | |
#if defined (MDE_CPU_IA32) | |
#define EFI_REMOVABLE_MEDIA_FILE_NAME EFI_REMOVABLE_MEDIA_FILE_NAME_IA32 | |
#elif defined (MDE_CPU_IPF) | |
#define EFI_REMOVABLE_MEDIA_FILE_NAME EFI_REMOVABLE_MEDIA_FILE_NAME_IA64 | |
#elif defined (MDE_CPU_X64) | |
#define EFI_REMOVABLE_MEDIA_FILE_NAME EFI_REMOVABLE_MEDIA_FILE_NAME_X64 | |
#elif defined (MDE_CPU_EBC) | |
#elif defined (MDE_CPU_ARM) | |
#define EFI_REMOVABLE_MEDIA_FILE_NAME EFI_REMOVABLE_MEDIA_FILE_NAME_ARM | |
#elif defined (MDE_CPU_AARCH64) | |
#define EFI_REMOVABLE_MEDIA_FILE_NAME EFI_REMOVABLE_MEDIA_FILE_NAME_AARCH64 | |
#else | |
#error Unknown Processor Type | |
#endif | |
#include <Uefi/UefiPxe.h> | |
#include <Uefi/UefiGpt.h> | |
#include <Uefi/UefiInternalFormRepresentation.h> | |
#endif |