uefi/linaro-edk2/NetworkPkg/Mtftp6Dxe/Mtftp6Impl.h - device/linaro/hikey960 - Gitiles

 /** @file
   Mtftp6 internal data structure and definition declaration.

   Copyright (c) 2009 - 2012, Intel Corporation. All rights reserved. <BR>

   This program and the accompanying materials
   are licensed and made available under the terms and conditions of the BSD License
   which accompanies this distribution.  The full text of the license may be found at
   http://opensource.org/licenses/bsd-license.php.

   THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
   WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

 **/

 #ifndef __EFI_MTFTP6_IMPL_H__
 #define __EFI_MTFTP6_IMPL_H__

 #include <Uefi.h>

 #include <Protocol/Udp6.h>
 #include <Protocol/Mtftp6.h>
 #include <Protocol/ServiceBinding.h>
 #include <Protocol/DriverBinding.h>

 #include <Library/DebugLib.h>
 #include <Library/UefiDriverEntryPoint.h>
 #include <Library/UefiBootServicesTableLib.h>
 #include <Library/UefiLib.h>
 #include <Library/BaseLib.h>
 #include <Library/NetLib.h>
 #include <Library/PrintLib.h>

 typedef struct _MTFTP6_SERVICE  MTFTP6_SERVICE;
 typedef struct _MTFTP6_INSTANCE MTFTP6_INSTANCE;

 #include "Mtftp6Driver.h"
 #include "Mtftp6Option.h"
 #include "Mtftp6Support.h"

 #define MTFTP6_SERVICE_SIGNATURE       SIGNATURE_32 ('M', 'F', '6', 'S')
 #define MTFTP6_INSTANCE_SIGNATURE      SIGNATURE_32 ('M', 'F', '6', 'I')

 #define MTFTP6_DEFAULT_SERVER_CMD_PORT 69
 #define MTFTP6_DEFAULT_TIMEOUT         3
 #define MTFTP6_GET_MAPPING_TIMEOUT     3
 #define MTFTP6_DEFAULT_MAX_RETRY       5
 #define MTFTP6_DEFAULT_BLK_SIZE        512
 #define MTFTP6_TICK_PER_SECOND         10000000U

 #define MTFTP6_SERVICE_FROM_THIS(a)    CR (a, MTFTP6_SERVICE, ServiceBinding, MTFTP6_SERVICE_SIGNATURE)
 #define MTFTP6_INSTANCE_FROM_THIS(a)   CR (a, MTFTP6_INSTANCE, Mtftp6, MTFTP6_INSTANCE_SIGNATURE)

 extern EFI_MTFTP6_PROTOCOL             gMtftp6ProtocolTemplate;

 typedef struct _MTFTP6_GETINFO_CONTEXT{
   EFI_MTFTP6_PACKET             **Packet;
   UINT32                        *PacketLen;
   EFI_STATUS                    Status;
 } MTFTP6_GETINFO_CONTEXT;

 //
 // Control block for MTFTP6 instance, it's per configuration data.
 //
 struct _MTFTP6_INSTANCE {
   UINT32                        Signature;
   EFI_HANDLE                    Handle;
   LIST_ENTRY                    Link;
   EFI_MTFTP6_PROTOCOL           Mtftp6;
   MTFTP6_SERVICE                *Service;
   EFI_MTFTP6_CONFIG_DATA        *Config;

   EFI_MTFTP6_TOKEN              *Token;
   MTFTP6_EXT_OPTION_INFO        ExtInfo;

   UINT16                        BlkSize;
   UINT16                        LastBlk;
   LIST_ENTRY                    BlkList;

   EFI_IPv6_ADDRESS              ServerIp;
   UINT16                        ServerCmdPort;
   UINT16                        ServerDataPort;
   UDP_IO                        *UdpIo;

   EFI_IPv6_ADDRESS              McastIp;
   UINT16                        McastPort;
   UDP_IO                        *McastUdpIo;

   NET_BUF                       *LastPacket;
   UINT32                        CurRetry;
   UINT32                        MaxRetry;
   UINT32                        PacketToLive;
   UINT32                        Timeout;

   EFI_TPL                       OldTpl;
   BOOLEAN                       IsTransmitted;
   BOOLEAN                       IsMaster;
   BOOLEAN                       InDestroy;
 };

 //
 // Control block for MTFTP6 service, it's per Nic handle.
 //
 struct _MTFTP6_SERVICE {
   UINT32                        Signature;
   EFI_SERVICE_BINDING_PROTOCOL  ServiceBinding;
   EFI_HANDLE                    Controller;
   EFI_HANDLE                    Image;

   UINT16                        ChildrenNum;
   LIST_ENTRY                    Children;
   //
   // It is used to be as internal calculagraph for all instances.
   //
   EFI_EVENT                     Timer;
   //
   // It is used to maintain the parent-child relationship between
   // mtftp driver and udp driver.
   //
   UDP_IO                        *DummyUdpIo;
 };

 typedef struct {
   EFI_SERVICE_BINDING_PROTOCOL  *ServiceBinding;
   UINTN                         NumberOfChildren;
   EFI_HANDLE                    *ChildHandleBuffer;
 } MTFTP6_DESTROY_CHILD_IN_HANDLE_BUF_CONTEXT;

 /**
   Returns the current operating mode data for the MTFTP6 instance.

   The GetModeData() function returns the current operating mode and
   cached data packet for the MTFTP6 instance.

   @param[in]  This               Pointer to the EFI_MTFTP6_PROTOCOL instance.
   @param[out] ModeData           The buffer in which the EFI MTFTPv6 Protocol driver mode
                                  data is returned.

   @retval  EFI_SUCCESS           The configuration data was returned successfully.
   @retval  EFI_OUT_OF_RESOURCES  The required mode data could not be allocated.
   @retval  EFI_INVALID_PARAMETER This is NULL, or ModeData is NULL.

 **/
 EFI_STATUS
 EFIAPI
 EfiMtftp6GetModeData (
   IN  EFI_MTFTP6_PROTOCOL    *This,
   OUT EFI_MTFTP6_MODE_DATA   *ModeData
   );

 /**
   Initializes, changes, or resets the default operational setting for
   this EFI MTFTPv6 Protocol driver instance.

   The Configure() function is used to set and change the configuration
   data for this EFI MTFTPv6 Protocol driver instance. The configuration
   data can be reset to startup defaults by calling Configure() with
   MtftpConfigData set to NULL. Whenever the instance is reset, any
   pending operation is aborted. By changing the EFI MTFTPv6 Protocol
   driver instance configuration data, the client can connect to
   different MTFTPv6 servers. The configuration parameters in
   MtftpConfigData are used as the default parameters in later MTFTPv6
   operations and can be overridden in later operations.

   @param[in]  This               Pointer to the EFI_MTFTP6_PROTOCOL instance.
   @param[in]  MtftpConfigData    Pointer to the configuration data structure.

   @retval  EFI_SUCCESS           The EFI MTFTPv6 Protocol instance was configured successfully.
   @retval  EFI_INVALID_PARAMETER One or more following conditions are TRUE:
                                  - This is NULL.
                                  - MtftpConfigData.StationIp is neither zero nor one
                                    of the configured IP addresses in the underlying IPv6 driver.
                                  - MtftpCofigData.ServerIp is not a valid IPv6 unicast address.
                                  Note: It does not match the UEFI 2.3 Specification.
   @retval  EFI_ACCESS_DENIED     - The configuration could not be changed at this time because there
                                    is some MTFTP background operation in progress.
                                  - MtftpCofigData.LocalPort is already in use.
                                  Note: It does not match the UEFI 2.3 Specification.
   @retval  EFI_NO_MAPPING        The underlying IPv6 driver was responsible for choosing a source
                                  address for this instance, but no source address was available for use.
   @retval  EFI_OUT_OF_RESOURCES  The EFI MTFTPv6 Protocol driver instance data could not be
                                  allocated.
                                  Note: It is not defined in the UEFI 2.3 Specification.
   @retval  EFI_DEVICE_ERROR      An unexpected system or network error occurred. The EFI
                                  MTFTPv6 Protocol driver instance is not configured.
                                  Note: It is not defined in the UEFI 2.3 Specification.

 **/
 EFI_STATUS
 EFIAPI
 EfiMtftp6Configure (
   IN EFI_MTFTP6_PROTOCOL    *This,
   IN EFI_MTFTP6_CONFIG_DATA *MtftpConfigData     OPTIONAL
   );

 /**
   Get the information of the download from the server.

   The GetInfo() function assembles an MTFTPv6 request packet
   with options, sends it to the MTFTPv6 server, and may return
   an MTFTPv6 OACK, MTFTPv6 ERROR, or ICMP ERROR packet. Retries
   occur only if no response packets are received from the MTFTPv6
   server before the timeout expires.

   @param[in]  This               Pointer to the EFI_MTFTP6_PROTOCOL instance.
   @param[in]  OverrideData       Data that is used to override the existing parameters. If NULL, the
                                  default parameters that were set in the EFI_MTFTP6_PROTOCOL.Configure()
                                  function are used.
   @param[in]  Filename           Pointer to null-terminated ASCII file name string.
   @param[in]  ModeStr            Pointer to null-terminated ASCII mode string. If NULL, octet will be used
   @param[in]  OptionCount        Number of option/value string pairs in OptionList.
   @param[in]  OptionList         Pointer to array of option/value string pairs. Ignored if
                                  OptionCount is zero.
   @param[out] PacketLength       The number of bytes in the returned packet.
   @param[out] Packet             The pointer to the received packet. This buffer must be freed by
                                  the caller.

   @retval  EFI_SUCCESS              An MTFTPv6 OACK packet was received and is in the Packet.
                                     Note: It does not match the UEFI 2.3 Specification.
   @retval  EFI_INVALID_PARAMETER    One or more of the following conditions is TRUE:
                                     - This is NULL.
                                     - Filename is NULL.
                                     - OptionCount is not zero and OptionList is NULL.
                                     - One or more options in OptionList have wrong format.
                                     - PacketLength is NULL.
                                     - OverrideData.ServerIp is not a valid unicast IPv6 address.
   @retval  EFI_UNSUPPORTED          One or more options in the OptionList are unsupported by
                                     this implementation.
   @retval  EFI_NOT_STARTED          The EFI MTFTPv6 Protocol driver has not been started.
   @retval  EFI_NO_MAPPING           The underlying IPv6 driver was responsible for choosing a source
                                     address for this instance, but no source address was available for use.
   @retval  EFI_ACCESS_DENIED        The previous operation has not completed yet.
   @retval  EFI_OUT_OF_RESOURCES     Required system resources could not be allocated.
   @retval  EFI_TFTP_ERROR           An MTFTPv6 ERROR packet was received and is in the Packet.
   @retval  EFI_NETWORK_UNREACHABLE  An ICMP network unreachable error packet was received, and the Packet is set to NULL.
                                     Note: It is not defined in the UEFI 2.3 Specification.
   @retval  EFI_HOST_UNREACHABLE     An ICMP host unreachable error packet was received, and the Packet is set to NULL.
                                     Note: It is not defined in the UEFI 2.3 Specification.
   @retval  EFI_PROTOCOL_UNREACHABLE An ICMP protocol unreachable error packet was received, and the Packet is set to NULL.
                                     Note: It is not defined in the UEFI 2.3 Specification.
   @retval  EFI_PORT_UNREACHABLE     An ICMP port unreachable error packet was received, and the Packet is set to NULL.
   @retval  EFI_ICMP_ERROR           Some other ICMP ERROR packet was received, and the Packet is set to NULL.
                                     Note: It does not match the UEFI 2.3 Specification.
   @retval  EFI_PROTOCOL_ERROR       An unexpected MTFTPv6 packet was received and is in the Packet.
   @retval  EFI_TIMEOUT              No responses were received from the MTFTPv6 server.
   @retval  EFI_DEVICE_ERROR         An unexpected network error or system error occurred.

 **/
 EFI_STATUS
 EFIAPI
 EfiMtftp6GetInfo (
   IN  EFI_MTFTP6_PROTOCOL      *This,
   IN  EFI_MTFTP6_OVERRIDE_DATA *OverrideData         OPTIONAL,
   IN  UINT8                    *Filename,
   IN  UINT8                    *ModeStr              OPTIONAL,
   IN  UINT8                    OptionCount,
   IN  EFI_MTFTP6_OPTION        *OptionList           OPTIONAL,
   OUT UINT32                   *PacketLength,
   OUT EFI_MTFTP6_PACKET        **Packet              OPTIONAL
   );

 /**
   Parse the options in an MTFTPv6 OACK packet.

   The ParseOptions() function parses the option fields in an MTFTPv6 OACK
   packet and returns the number of options that were found, and optionally,
   a list of pointers to the options in the packet. If one or more of the
   option fields are not valid, then EFI_PROTOCOL_ERROR is returned and
   *OptionCount and *OptionList stop at the last valid option.

   @param[in]  This               Pointer to the EFI_MTFTP6_PROTOCOL instance.
   @param[in]  PacketLen          Length of the OACK packet to be parsed.
   @param[in]  Packet             Pointer to the OACK packet to be parsed.
   @param[out] OptionCount        Pointer to the number of options in the following OptionList.
   @param[out] OptionList         Pointer to EFI_MTFTP6_OPTION storage. Each pointer in the
                                  OptionList points to the corresponding MTFTP option buffer
                                  in the Packet. Call the EFI Boot Service FreePool() to
                                  release the OptionList if the options in this OptionList
                                  are not needed any more.

   @retval  EFI_SUCCESS           The OACK packet was valid and the OptionCount, and
                                  OptionList parameters have been updated.
   @retval  EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
                                  - PacketLen is 0.
                                  - Packet is NULL or Packet is not a valid MTFTPv6 packet.
                                  - OptionCount is NULL.
   @retval  EFI_NOT_FOUND         No options were found in the OACK packet.
   @retval  EFI_OUT_OF_RESOURCES  Storage for the OptionList array can not be allocated.
   @retval  EFI_PROTOCOL_ERROR    One or more of the option fields is invalid.

 **/
 EFI_STATUS
 EFIAPI
 EfiMtftp6ParseOptions (
   IN     EFI_MTFTP6_PROTOCOL    *This,
   IN     UINT32                 PacketLen,
   IN     EFI_MTFTP6_PACKET      *Packet,
   OUT    UINT32                 *OptionCount,
   OUT    EFI_MTFTP6_OPTION      **OptionList          OPTIONAL
   );

 /**
   Download a file from an MTFTPv6 server.

   The ReadFile() function is used to initialize and start an MTFTPv6 download
   process and optionally wait for completion. When the download operation
   completes, whether successfully or not, the Token.Status field is updated
   by the EFI MTFTPv6 Protocol driver, and then Token.Event is signaled if it
   is not NULL.
   Data can be downloaded from the MTFTPv6 server into either of the following
   locations:
   - A fixed buffer that is pointed to by Token.Buffer.
   - A download service function that is pointed to by Token.CheckPacket.
   If both Token.Buffer and Token.CheckPacket are used, then Token.CheckPacket
   will be called first. If the call is successful, the packet will be stored
   in Token.Buffer.

   @param[in]  This               Pointer to the EFI_MTFTP6_PROTOCOL instance.
   @param[in]  Token              Pointer to the token structure to provide the parameters that are
                                  used in this operation.

   @retval  EFI_SUCCESS              The data file has been transferred successfully.
   @retval  EFI_OUT_OF_RESOURCES     Required system resources could not be allocated.
   @retval  EFI_BUFFER_TOO_SMALL     BufferSize is not zero but not large enough to hold the
                                     downloaded data in downloading process.
                                     Note: It does not match the UEFI 2.3 Specification.
   @retval  EFI_ABORTED              Current operation is aborted by user.
   @retval  EFI_NETWORK_UNREACHABLE  An ICMP network unreachable error packet was received.
                                     Note: It is not defined in the UEFI 2.3 Specification.
   @retval  EFI_HOST_UNREACHABLE     An ICMP host unreachable error packet was received.
                                     Note: It is not defined in the UEFI 2.3 Specification.
   @retval  EFI_PROTOCOL_UNREACHABLE An ICMP protocol unreachable error packet was received.
                                     Note: It is not defined in the UEFI 2.3 Specification.
   @retval  EFI_PORT_UNREACHABLE     An ICMP port unreachable error packet was received.
                                     Note: It is not defined in the UEFI 2.3 Specification.
   @retval  EFI_ICMP_ERROR           An ICMP ERROR packet was received.
   @retval  EFI_TIMEOUT              No responses were received from the MTFTPv6 server.
   @retval  EFI_TFTP_ERROR           An MTFTPv6 ERROR packet was received.
   @retval  EFI_DEVICE_ERROR         An unexpected network error or system error occurred.

 **/
 EFI_STATUS
 EFIAPI
 EfiMtftp6ReadFile (
   IN EFI_MTFTP6_PROTOCOL    *This,
   IN EFI_MTFTP6_TOKEN       *Token
   );

 /**
   Send a file to an MTFTPv6 server.

   The WriteFile() function is used to initialize an uploading operation
   with the given option list, and optionally, wait for completion. If one
   or more of the options is not supported by the server, the unsupported
   options are ignored and a standard TFTP process starts instead. When
   the upload process completes, whether successfully or not, Token.Event
   is signaled, and the EFI MTFTPv6 Protocol driver updates Token.Status.
   The caller can supply the data to be uploaded in the following two modes:
   - Through the user-provided buffer.
   - Through a callback function.
   With the user-provided buffer, the Token.BufferSize field indicates
   the length of the buffer, and the driver will upload the data in the
   buffer. With an EFI_MTFTP6_PACKET_NEEDED callback function, the driver
   will call this callback function to get more data from the user to upload.

   @param[in]  This               Pointer to the EFI_MTFTP6_PROTOCOL instance.
   @param[in]  Token              Pointer to the token structure to provide the parameters that are
                                  used in this operation.

   @retval  EFI_SUCCESS           The upload session has started.
   @retval  EFI_UNSUPPORTED       The operation is not supported by this implementation.
   @retval  EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
                                  - This is NULL.
                                  - Token is NULL.
                                  - Token.Filename is NULL.
                                  - Token.OptionCount is not zero and Token.OptionList is NULL.
                                  - One or more options in Token.OptionList have wrong format.
                                  - Token.Buffer and Token.PacketNeeded are both NULL.
                                  - Token.OverrideData.ServerIp is not valid unicast IPv6 addresses.
   @retval  EFI_UNSUPPORTED       One or more options in the Token.OptionList are not
                                  supported by this implementation.
   @retval  EFI_NOT_STARTED       The EFI MTFTPv6 Protocol driver has not been started.
   @retval  EFI_NO_MAPPING        The underlying IPv6 driver was responsible for choosing a source
                                  address for this instance, but no source address was available for use.
   @retval  EFI_ALREADY_STARTED   This Token is already being used in another MTFTPv6 session.
   @retval  EFI_OUT_OF_RESOURCES  Required system resources could not be allocated.
   @retval  EFI_ACCESS_DENIED     The previous operation has not completed yet.
   @retval  EFI_DEVICE_ERROR      An unexpected network error or system error occurred.

 **/
 EFI_STATUS
 EFIAPI
 EfiMtftp6WriteFile (
   IN EFI_MTFTP6_PROTOCOL    *This,
   IN EFI_MTFTP6_TOKEN       *Token
   );

 /**
   Download a data file directory from an MTFTPv6 server.

   The ReadDirectory() function is used to return a list of files on the
   MTFTPv6 server that are logically (or operationally) related to
   Token.Filename. The directory request packet that is sent to the server
   is built with the option list that was provided by caller, if present.
   The file information that the server returns is put into either of
   the following locations:
   - A fixed buffer that is pointed to by Token.Buffer.
   - A download service function that is pointed to by Token.CheckPacket.
   If both Token.Buffer and Token.CheckPacket are used, then Token.CheckPacket
   will be called first. If the call is successful, the packet will be stored
   in Token.Buffer.

   @param[in]  This               Pointer to the EFI_MTFTP6_PROTOCOL instance.
   @param[in]  Token              Pointer to the token structure to provide the parameters that are
                                  used in this operation.

   @retval  EFI_SUCCESS           The MTFTPv6 related file "directory" has been downloaded.
   @retval  EFI_UNSUPPORTED       The EFI MTFTPv6 Protocol driver does not support this function.
   @retval  EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
                                  - This is NULL.
                                  - Token is NULL.
                                  - Token.Filename is NULL.
                                  - Token.OptionCount is not zero and Token.OptionList is NULL.
                                  - One or more options in Token.OptionList have wrong format.
                                  - Token.Buffer and Token.CheckPacket are both NULL.
                                  - Token.OverrideData.ServerIp is not valid unicast IPv6 addresses.
   @retval  EFI_UNSUPPORTED       One or more options in the Token.OptionList are not
                                  supported by this implementation.
   @retval  EFI_NOT_STARTED       The EFI MTFTPv6 Protocol driver has not been started.
   @retval  EFI_NO_MAPPING        The underlying IPv6 driver was responsible for choosing a source
                                  address for this instance, but no source address was available for use.
   @retval  EFI_ALREADY_STARTED   This Token is already being used in another MTFTPv6 session.
   @retval  EFI_OUT_OF_RESOURCES  Required system resources could not be allocated.
   @retval  EFI_ACCESS_DENIED     The previous operation has not completed yet.
   @retval  EFI_DEVICE_ERROR      An unexpected network error or system error occurred.

 **/
 EFI_STATUS
 EFIAPI
 EfiMtftp6ReadDirectory (
   IN EFI_MTFTP6_PROTOCOL        *This,
   IN EFI_MTFTP6_TOKEN           *Token
   );

 /**
   Polls for incoming data packets and processes outgoing data packets.

   The Poll() function can be used by network drivers and applications
   to increase the rate that data packets are moved between the
   communications device and the transmit and receive queues.In some
   systems, the periodic timer event in the managed network driver may
   not poll the underlying communications device fast enough to transmit
   and/or receive all data packets without missing incoming packets or
   dropping outgoing packets. Drivers and applications that are
   experiencing packet loss should try calling the Poll() function
   more often.

   @param[in]  This                   The MTFTP6 protocol instance.


   @retval  EFI_SUCCESS           Incoming or outgoing data was processed.
   @retval  EFI_NOT_STARTED       This EFI MTFTPv6 Protocol instance has not been started.
   @retval  EFI_INVALID_PARAMETER This is NULL.
   @retval  EFI_DEVICE_ERROR      An unexpected system or network error occurred.
   @retval  EFI_TIMEOUT           Data was dropped out of the transmit and/or receive queue.
                                  Consider increasing the polling rate.

 **/
 EFI_STATUS
 EFIAPI
 EfiMtftp6Poll (
   IN EFI_MTFTP6_PROTOCOL    *This
   );

 #endif
	/** @file
	Mtftp6 internal data structure and definition declaration.

	Copyright (c) 2009 - 2012, Intel Corporation. All rights reserved. <BR>

	This program and the accompanying materials
	are licensed and made available under the terms and conditions of the BSD License
	which accompanies this distribution. The full text of the license may be found at
	http://opensource.org/licenses/bsd-license.php.

	THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
	WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

	**/

	#ifndef __EFI_MTFTP6_IMPL_H__
	#define __EFI_MTFTP6_IMPL_H__

	#include <Uefi.h>

	#include <Protocol/Udp6.h>
	#include <Protocol/Mtftp6.h>
	#include <Protocol/ServiceBinding.h>
	#include <Protocol/DriverBinding.h>

	#include <Library/DebugLib.h>
	#include <Library/UefiDriverEntryPoint.h>
	#include <Library/UefiBootServicesTableLib.h>
	#include <Library/UefiLib.h>
	#include <Library/BaseLib.h>
	#include <Library/NetLib.h>
	#include <Library/PrintLib.h>

	typedef struct _MTFTP6_SERVICE MTFTP6_SERVICE;
	typedef struct _MTFTP6_INSTANCE MTFTP6_INSTANCE;

	#include "Mtftp6Driver.h"
	#include "Mtftp6Option.h"
	#include "Mtftp6Support.h"

	#define MTFTP6_SERVICE_SIGNATURE SIGNATURE_32 ('M', 'F', '6', 'S')
	#define MTFTP6_INSTANCE_SIGNATURE SIGNATURE_32 ('M', 'F', '6', 'I')

	#define MTFTP6_DEFAULT_SERVER_CMD_PORT 69
	#define MTFTP6_DEFAULT_TIMEOUT 3
	#define MTFTP6_GET_MAPPING_TIMEOUT 3
	#define MTFTP6_DEFAULT_MAX_RETRY 5
	#define MTFTP6_DEFAULT_BLK_SIZE 512
	#define MTFTP6_TICK_PER_SECOND 10000000U

	#define MTFTP6_SERVICE_FROM_THIS(a) CR (a, MTFTP6_SERVICE, ServiceBinding, MTFTP6_SERVICE_SIGNATURE)
	#define MTFTP6_INSTANCE_FROM_THIS(a) CR (a, MTFTP6_INSTANCE, Mtftp6, MTFTP6_INSTANCE_SIGNATURE)

	extern EFI_MTFTP6_PROTOCOL gMtftp6ProtocolTemplate;

	typedef struct _MTFTP6_GETINFO_CONTEXT{
	EFI_MTFTP6_PACKET **Packet;
	UINT32 *PacketLen;
	EFI_STATUS Status;
	} MTFTP6_GETINFO_CONTEXT;

	//
	// Control block for MTFTP6 instance, it's per configuration data.
	//
	struct _MTFTP6_INSTANCE {
	UINT32 Signature;
	EFI_HANDLE Handle;
	LIST_ENTRY Link;
	EFI_MTFTP6_PROTOCOL Mtftp6;
	MTFTP6_SERVICE *Service;
	EFI_MTFTP6_CONFIG_DATA *Config;

	EFI_MTFTP6_TOKEN *Token;
	MTFTP6_EXT_OPTION_INFO ExtInfo;

	UINT16 BlkSize;
	UINT16 LastBlk;
	LIST_ENTRY BlkList;

	EFI_IPv6_ADDRESS ServerIp;
	UINT16 ServerCmdPort;
	UINT16 ServerDataPort;
	UDP_IO *UdpIo;

	EFI_IPv6_ADDRESS McastIp;
	UINT16 McastPort;
	UDP_IO *McastUdpIo;

	NET_BUF *LastPacket;
	UINT32 CurRetry;
	UINT32 MaxRetry;
	UINT32 PacketToLive;
	UINT32 Timeout;

	EFI_TPL OldTpl;
	BOOLEAN IsTransmitted;
	BOOLEAN IsMaster;
	BOOLEAN InDestroy;
	};

	//
	// Control block for MTFTP6 service, it's per Nic handle.
	//
	struct _MTFTP6_SERVICE {
	UINT32 Signature;
	EFI_SERVICE_BINDING_PROTOCOL ServiceBinding;
	EFI_HANDLE Controller;
	EFI_HANDLE Image;

	UINT16 ChildrenNum;
	LIST_ENTRY Children;
	//
	// It is used to be as internal calculagraph for all instances.
	//
	EFI_EVENT Timer;
	//
	// It is used to maintain the parent-child relationship between
	// mtftp driver and udp driver.
	//
	UDP_IO *DummyUdpIo;
	};

	typedef struct {
	EFI_SERVICE_BINDING_PROTOCOL *ServiceBinding;
	UINTN NumberOfChildren;
	EFI_HANDLE *ChildHandleBuffer;
	} MTFTP6_DESTROY_CHILD_IN_HANDLE_BUF_CONTEXT;

	/**
	Returns the current operating mode data for the MTFTP6 instance.

	The GetModeData() function returns the current operating mode and
	cached data packet for the MTFTP6 instance.

	@param[in] This Pointer to the EFI_MTFTP6_PROTOCOL instance.
	@param[out] ModeData The buffer in which the EFI MTFTPv6 Protocol driver mode
	data is returned.

	@retval EFI_SUCCESS The configuration data was returned successfully.
	@retval EFI_OUT_OF_RESOURCES The required mode data could not be allocated.
	@retval EFI_INVALID_PARAMETER This is NULL, or ModeData is NULL.

	**/
	EFI_STATUS
	EFIAPI
	EfiMtftp6GetModeData (
	IN EFI_MTFTP6_PROTOCOL *This,
	OUT EFI_MTFTP6_MODE_DATA *ModeData
	);

	/**
	Initializes, changes, or resets the default operational setting for
	this EFI MTFTPv6 Protocol driver instance.

	The Configure() function is used to set and change the configuration
	data for this EFI MTFTPv6 Protocol driver instance. The configuration
	data can be reset to startup defaults by calling Configure() with
	MtftpConfigData set to NULL. Whenever the instance is reset, any
	pending operation is aborted. By changing the EFI MTFTPv6 Protocol
	driver instance configuration data, the client can connect to
	different MTFTPv6 servers. The configuration parameters in
	MtftpConfigData are used as the default parameters in later MTFTPv6
	operations and can be overridden in later operations.

	@param[in] This Pointer to the EFI_MTFTP6_PROTOCOL instance.
	@param[in] MtftpConfigData Pointer to the configuration data structure.

	@retval EFI_SUCCESS The EFI MTFTPv6 Protocol instance was configured successfully.
	@retval EFI_INVALID_PARAMETER One or more following conditions are TRUE:
	- This is NULL.
	- MtftpConfigData.StationIp is neither zero nor one
	of the configured IP addresses in the underlying IPv6 driver.
	- MtftpCofigData.ServerIp is not a valid IPv6 unicast address.
	Note: It does not match the UEFI 2.3 Specification.
	@retval EFI_ACCESS_DENIED - The configuration could not be changed at this time because there
	is some MTFTP background operation in progress.
	- MtftpCofigData.LocalPort is already in use.
	Note: It does not match the UEFI 2.3 Specification.
	@retval EFI_NO_MAPPING The underlying IPv6 driver was responsible for choosing a source
	address for this instance, but no source address was available for use.
	@retval EFI_OUT_OF_RESOURCES The EFI MTFTPv6 Protocol driver instance data could not be
	allocated.
	Note: It is not defined in the UEFI 2.3 Specification.
	@retval EFI_DEVICE_ERROR An unexpected system or network error occurred. The EFI
	MTFTPv6 Protocol driver instance is not configured.
	Note: It is not defined in the UEFI 2.3 Specification.

	**/
	EFI_STATUS
	EFIAPI
	EfiMtftp6Configure (
	IN EFI_MTFTP6_PROTOCOL *This,
	IN EFI_MTFTP6_CONFIG_DATA *MtftpConfigData OPTIONAL
	);

	/**
	Get the information of the download from the server.

	The GetInfo() function assembles an MTFTPv6 request packet
	with options, sends it to the MTFTPv6 server, and may return
	an MTFTPv6 OACK, MTFTPv6 ERROR, or ICMP ERROR packet. Retries
	occur only if no response packets are received from the MTFTPv6
	server before the timeout expires.

	@param[in] This Pointer to the EFI_MTFTP6_PROTOCOL instance.
	@param[in] OverrideData Data that is used to override the existing parameters. If NULL, the
	default parameters that were set in the EFI_MTFTP6_PROTOCOL.Configure()
	function are used.
	@param[in] Filename Pointer to null-terminated ASCII file name string.
	@param[in] ModeStr Pointer to null-terminated ASCII mode string. If NULL, octet will be used
	@param[in] OptionCount Number of option/value string pairs in OptionList.
	@param[in] OptionList Pointer to array of option/value string pairs. Ignored if
	OptionCount is zero.
	@param[out] PacketLength The number of bytes in the returned packet.
	@param[out] Packet The pointer to the received packet. This buffer must be freed by
	the caller.

	@retval EFI_SUCCESS An MTFTPv6 OACK packet was received and is in the Packet.
	Note: It does not match the UEFI 2.3 Specification.
	@retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
	- This is NULL.
	- Filename is NULL.
	- OptionCount is not zero and OptionList is NULL.
	- One or more options in OptionList have wrong format.
	- PacketLength is NULL.
	- OverrideData.ServerIp is not a valid unicast IPv6 address.
	@retval EFI_UNSUPPORTED One or more options in the OptionList are unsupported by
	this implementation.
	@retval EFI_NOT_STARTED The EFI MTFTPv6 Protocol driver has not been started.
	@retval EFI_NO_MAPPING The underlying IPv6 driver was responsible for choosing a source
	address for this instance, but no source address was available for use.
	@retval EFI_ACCESS_DENIED The previous operation has not completed yet.
	@retval EFI_OUT_OF_RESOURCES Required system resources could not be allocated.
	@retval EFI_TFTP_ERROR An MTFTPv6 ERROR packet was received and is in the Packet.
	@retval EFI_NETWORK_UNREACHABLE An ICMP network unreachable error packet was received, and the Packet is set to NULL.
	Note: It is not defined in the UEFI 2.3 Specification.
	@retval EFI_HOST_UNREACHABLE An ICMP host unreachable error packet was received, and the Packet is set to NULL.
	Note: It is not defined in the UEFI 2.3 Specification.
	@retval EFI_PROTOCOL_UNREACHABLE An ICMP protocol unreachable error packet was received, and the Packet is set to NULL.
	Note: It is not defined in the UEFI 2.3 Specification.
	@retval EFI_PORT_UNREACHABLE An ICMP port unreachable error packet was received, and the Packet is set to NULL.
	@retval EFI_ICMP_ERROR Some other ICMP ERROR packet was received, and the Packet is set to NULL.
	Note: It does not match the UEFI 2.3 Specification.
	@retval EFI_PROTOCOL_ERROR An unexpected MTFTPv6 packet was received and is in the Packet.
	@retval EFI_TIMEOUT No responses were received from the MTFTPv6 server.
	@retval EFI_DEVICE_ERROR An unexpected network error or system error occurred.

	**/
	EFI_STATUS
	EFIAPI
	EfiMtftp6GetInfo (
	IN EFI_MTFTP6_PROTOCOL *This,
	IN EFI_MTFTP6_OVERRIDE_DATA *OverrideData OPTIONAL,
	IN UINT8 *Filename,
	IN UINT8 *ModeStr OPTIONAL,
	IN UINT8 OptionCount,
	IN EFI_MTFTP6_OPTION *OptionList OPTIONAL,
	OUT UINT32 *PacketLength,
	OUT EFI_MTFTP6_PACKET **Packet OPTIONAL
	);

	/**
	Parse the options in an MTFTPv6 OACK packet.

	The ParseOptions() function parses the option fields in an MTFTPv6 OACK
	packet and returns the number of options that were found, and optionally,
	a list of pointers to the options in the packet. If one or more of the
	option fields are not valid, then EFI_PROTOCOL_ERROR is returned and
	OptionCount and OptionList stop at the last valid option.

	@param[in] This Pointer to the EFI_MTFTP6_PROTOCOL instance.
	@param[in] PacketLen Length of the OACK packet to be parsed.
	@param[in] Packet Pointer to the OACK packet to be parsed.
	@param[out] OptionCount Pointer to the number of options in the following OptionList.
	@param[out] OptionList Pointer to EFI_MTFTP6_OPTION storage. Each pointer in the
	OptionList points to the corresponding MTFTP option buffer
	in the Packet. Call the EFI Boot Service FreePool() to
	release the OptionList if the options in this OptionList
	are not needed any more.

	@retval EFI_SUCCESS The OACK packet was valid and the OptionCount, and
	OptionList parameters have been updated.
	@retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
	- PacketLen is 0.
	- Packet is NULL or Packet is not a valid MTFTPv6 packet.
	- OptionCount is NULL.
	@retval EFI_NOT_FOUND No options were found in the OACK packet.
	@retval EFI_OUT_OF_RESOURCES Storage for the OptionList array can not be allocated.
	@retval EFI_PROTOCOL_ERROR One or more of the option fields is invalid.

	**/
	EFI_STATUS
	EFIAPI
	EfiMtftp6ParseOptions (
	IN EFI_MTFTP6_PROTOCOL *This,
	IN UINT32 PacketLen,
	IN EFI_MTFTP6_PACKET *Packet,
	OUT UINT32 *OptionCount,
	OUT EFI_MTFTP6_OPTION **OptionList OPTIONAL
	);

	/**
	Download a file from an MTFTPv6 server.

	The ReadFile() function is used to initialize and start an MTFTPv6 download
	process and optionally wait for completion. When the download operation
	completes, whether successfully or not, the Token.Status field is updated
	by the EFI MTFTPv6 Protocol driver, and then Token.Event is signaled if it
	is not NULL.
	Data can be downloaded from the MTFTPv6 server into either of the following
	locations:
	- A fixed buffer that is pointed to by Token.Buffer.
	- A download service function that is pointed to by Token.CheckPacket.
	If both Token.Buffer and Token.CheckPacket are used, then Token.CheckPacket
	will be called first. If the call is successful, the packet will be stored
	in Token.Buffer.

	@param[in] This Pointer to the EFI_MTFTP6_PROTOCOL instance.
	@param[in] Token Pointer to the token structure to provide the parameters that are
	used in this operation.

	@retval EFI_SUCCESS The data file has been transferred successfully.
	@retval EFI_OUT_OF_RESOURCES Required system resources could not be allocated.
	@retval EFI_BUFFER_TOO_SMALL BufferSize is not zero but not large enough to hold the
	downloaded data in downloading process.
	Note: It does not match the UEFI 2.3 Specification.
	@retval EFI_ABORTED Current operation is aborted by user.
	@retval EFI_NETWORK_UNREACHABLE An ICMP network unreachable error packet was received.
	Note: It is not defined in the UEFI 2.3 Specification.
	@retval EFI_HOST_UNREACHABLE An ICMP host unreachable error packet was received.
	Note: It is not defined in the UEFI 2.3 Specification.
	@retval EFI_PROTOCOL_UNREACHABLE An ICMP protocol unreachable error packet was received.
	Note: It is not defined in the UEFI 2.3 Specification.
	@retval EFI_PORT_UNREACHABLE An ICMP port unreachable error packet was received.
	Note: It is not defined in the UEFI 2.3 Specification.
	@retval EFI_ICMP_ERROR An ICMP ERROR packet was received.
	@retval EFI_TIMEOUT No responses were received from the MTFTPv6 server.
	@retval EFI_TFTP_ERROR An MTFTPv6 ERROR packet was received.
	@retval EFI_DEVICE_ERROR An unexpected network error or system error occurred.

	**/
	EFI_STATUS
	EFIAPI
	EfiMtftp6ReadFile (
	IN EFI_MTFTP6_PROTOCOL *This,
	IN EFI_MTFTP6_TOKEN *Token
	);

	/**
	Send a file to an MTFTPv6 server.

	The WriteFile() function is used to initialize an uploading operation
	with the given option list, and optionally, wait for completion. If one
	or more of the options is not supported by the server, the unsupported
	options are ignored and a standard TFTP process starts instead. When
	the upload process completes, whether successfully or not, Token.Event
	is signaled, and the EFI MTFTPv6 Protocol driver updates Token.Status.
	The caller can supply the data to be uploaded in the following two modes:
	- Through the user-provided buffer.
	- Through a callback function.
	With the user-provided buffer, the Token.BufferSize field indicates
	the length of the buffer, and the driver will upload the data in the
	buffer. With an EFI_MTFTP6_PACKET_NEEDED callback function, the driver
	will call this callback function to get more data from the user to upload.

	@param[in] This Pointer to the EFI_MTFTP6_PROTOCOL instance.
	@param[in] Token Pointer to the token structure to provide the parameters that are
	used in this operation.

	@retval EFI_SUCCESS The upload session has started.
	@retval EFI_UNSUPPORTED The operation is not supported by this implementation.
	@retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
	- This is NULL.
	- Token is NULL.
	- Token.Filename is NULL.
	- Token.OptionCount is not zero and Token.OptionList is NULL.
	- One or more options in Token.OptionList have wrong format.
	- Token.Buffer and Token.PacketNeeded are both NULL.
	- Token.OverrideData.ServerIp is not valid unicast IPv6 addresses.
	@retval EFI_UNSUPPORTED One or more options in the Token.OptionList are not
	supported by this implementation.
	@retval EFI_NOT_STARTED The EFI MTFTPv6 Protocol driver has not been started.
	@retval EFI_NO_MAPPING The underlying IPv6 driver was responsible for choosing a source
	address for this instance, but no source address was available for use.
	@retval EFI_ALREADY_STARTED This Token is already being used in another MTFTPv6 session.
	@retval EFI_OUT_OF_RESOURCES Required system resources could not be allocated.
	@retval EFI_ACCESS_DENIED The previous operation has not completed yet.
	@retval EFI_DEVICE_ERROR An unexpected network error or system error occurred.

	**/
	EFI_STATUS
	EFIAPI
	EfiMtftp6WriteFile (
	IN EFI_MTFTP6_PROTOCOL *This,
	IN EFI_MTFTP6_TOKEN *Token
	);

	/**
	Download a data file directory from an MTFTPv6 server.

	The ReadDirectory() function is used to return a list of files on the
	MTFTPv6 server that are logically (or operationally) related to
	Token.Filename. The directory request packet that is sent to the server
	is built with the option list that was provided by caller, if present.
	The file information that the server returns is put into either of
	the following locations:
	- A fixed buffer that is pointed to by Token.Buffer.
	- A download service function that is pointed to by Token.CheckPacket.
	If both Token.Buffer and Token.CheckPacket are used, then Token.CheckPacket
	will be called first. If the call is successful, the packet will be stored
	in Token.Buffer.

	@param[in] This Pointer to the EFI_MTFTP6_PROTOCOL instance.
	@param[in] Token Pointer to the token structure to provide the parameters that are
	used in this operation.

	@retval EFI_SUCCESS The MTFTPv6 related file "directory" has been downloaded.
	@retval EFI_UNSUPPORTED The EFI MTFTPv6 Protocol driver does not support this function.
	@retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
	- This is NULL.
	- Token is NULL.
	- Token.Filename is NULL.
	- Token.OptionCount is not zero and Token.OptionList is NULL.
	- One or more options in Token.OptionList have wrong format.
	- Token.Buffer and Token.CheckPacket are both NULL.
	- Token.OverrideData.ServerIp is not valid unicast IPv6 addresses.
	@retval EFI_UNSUPPORTED One or more options in the Token.OptionList are not
	supported by this implementation.
	@retval EFI_NOT_STARTED The EFI MTFTPv6 Protocol driver has not been started.
	@retval EFI_NO_MAPPING The underlying IPv6 driver was responsible for choosing a source
	address for this instance, but no source address was available for use.
	@retval EFI_ALREADY_STARTED This Token is already being used in another MTFTPv6 session.
	@retval EFI_OUT_OF_RESOURCES Required system resources could not be allocated.
	@retval EFI_ACCESS_DENIED The previous operation has not completed yet.
	@retval EFI_DEVICE_ERROR An unexpected network error or system error occurred.

	**/
	EFI_STATUS
	EFIAPI
	EfiMtftp6ReadDirectory (
	IN EFI_MTFTP6_PROTOCOL *This,
	IN EFI_MTFTP6_TOKEN *Token
	);

	/**
	Polls for incoming data packets and processes outgoing data packets.

	The Poll() function can be used by network drivers and applications
	to increase the rate that data packets are moved between the
	communications device and the transmit and receive queues.In some
	systems, the periodic timer event in the managed network driver may
	not poll the underlying communications device fast enough to transmit
	and/or receive all data packets without missing incoming packets or
	dropping outgoing packets. Drivers and applications that are
	experiencing packet loss should try calling the Poll() function
	more often.

	@param[in] This The MTFTP6 protocol instance.


	@retval EFI_SUCCESS Incoming or outgoing data was processed.
	@retval EFI_NOT_STARTED This EFI MTFTPv6 Protocol instance has not been started.
	@retval EFI_INVALID_PARAMETER This is NULL.
	@retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
	@retval EFI_TIMEOUT Data was dropped out of the transmit and/or receive queue.
	Consider increasing the polling rate.

	**/
	EFI_STATUS
	EFIAPI
	EfiMtftp6Poll (
	IN EFI_MTFTP6_PROTOCOL *This
	);

	#endif