| /**@file | |
| Copyright (c) 2006 - 2009, Intel Corporation. All rights reserved.<BR> | |
| This program and the accompanying materials | |
| are licensed and made available under the terms and conditions of the BSD License | |
| which accompanies this distribution. The full text of the license may be found at | |
| http://opensource.org/licenses/bsd-license.php | |
| THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
| WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
| Module Name: | |
| WinNtBusDriver.c | |
| Abstract: | |
| This following section documents the envirnoment variables for the Win NT | |
| build. These variables are used to define the (virtual) hardware | |
| configuration of the NT environment | |
| A ! can be used to seperate multiple instances in a variable. Each | |
| instance represents a seperate hardware device. | |
| EFI_WIN_NT_PHYSICAL_DISKS - maps to drives on your system | |
| EFI_WIN_NT_VIRTUAL_DISKS - maps to a device emulated by a file | |
| EFI_WIN_NT_FILE_SYSTEM - mouts a directory as a file system | |
| EFI_WIN_NT_CONSOLE - make a logical comand line window (only one!) | |
| EFI_WIN_NT_GOP - Builds GOP Windows of Width and Height | |
| EFI_WIN_NT_SERIAL_PORT - maps physical serial ports | |
| <F>ixed - Fixed disk like a hard drive. | |
| <R>emovable - Removable media like a floppy or CD-ROM. | |
| Read <O>nly - Write protected device. | |
| Read <W>rite - Read write device. | |
| <block count> - Decimal number of blocks a device supports. | |
| <block size> - Decimal number of bytes per block. | |
| NT envirnonment variable contents. '<' and '>' are not part of the variable, | |
| they are just used to make this help more readable. There should be no | |
| spaces between the ';'. Extra spaces will break the variable. A '!' is | |
| used to seperate multiple devices in a variable. | |
| EFI_WIN_NT_VIRTUAL_DISKS = | |
| <F | R><O | W>;<block count>;<block size>[!...] | |
| EFI_WIN_NT_PHYSICAL_DISKS = | |
| <drive letter>:<F | R><O | W>;<block count>;<block size>[!...] | |
| Virtual Disks: These devices use a file to emulate a hard disk or removable | |
| media device. | |
| Thus a 20 MB emulated hard drive would look like: | |
| EFI_WIN_NT_VIRTUAL_DISKS=FW;40960;512 | |
| A 1.44MB emulated floppy with a block size of 1024 would look like: | |
| EFI_WIN_NT_VIRTUAL_DISKS=RW;1440;1024 | |
| Physical Disks: These devices use NT to open a real device in your system | |
| Thus a 120 MB floppy would look like: | |
| EFI_WIN_NT_PHYSICAL_DISKS=B:RW;245760;512 | |
| Thus a standard CD-ROM floppy would look like: | |
| EFI_WIN_NT_PHYSICAL_DISKS=Z:RO;307200;2048 | |
| EFI_WIN_NT_FILE_SYSTEM = | |
| <directory path>[!...] | |
| Mounting the two directories C:\FOO and C:\BAR would look like: | |
| EFI_WIN_NT_FILE_SYSTEM=c:\foo!c:\bar | |
| EFI_WIN_NT_CONSOLE = | |
| <window title> | |
| Declaring a text console window with the title "My EFI Console" woild look like: | |
| EFI_WIN_NT_CONSOLE=My EFI Console | |
| EFI_WIN_NT_GOP = | |
| <width> <height>[!...] | |
| Declaring a two GOP windows with resolutions of 800x600 and 1024x768 would look like: | |
| Example : EFI_WIN_NT_GOP=800 600!1024 768 | |
| EFI_WIN_NT_SERIAL_PORT = | |
| <port name>[!...] | |
| Declaring two serial ports on COM1 and COM2 would look like: | |
| Example : EFI_WIN_NT_SERIAL_PORT=COM1!COM2 | |
| EFI_WIN_NT_PASS_THROUGH = | |
| <BaseAddress>;<Bus#>;<Device#>;<Function#> | |
| Declaring a base address of 0xE0000000 (used for PCI Express devices) | |
| and having NT32 talk to a device located at bus 0, device 1, function 0: | |
| Example : EFI_WIN_NT_PASS_THROUGH=E000000;0;1;0 | |
| ---*/ | |
| // | |
| // The package level header files this module uses | |
| // | |
| #include <Uefi.h> | |
| #include <WinNtDxe.h> | |
| // | |
| // The protocols, PPI and GUID defintions for this module | |
| // | |
| #include <Protocol/WinNtThunk.h> | |
| #include <Protocol/WinNtIo.h> | |
| #include <Protocol/ComponentName.h> | |
| #include <Protocol/DriverBinding.h> | |
| #include <Protocol/DevicePath.h> | |
| // | |
| // The Library classes this module consumes | |
| // | |
| #include <Library/DebugLib.h> | |
| #include <Library/BaseLib.h> | |
| #include <Library/UefiDriverEntryPoint.h> | |
| #include <Library/UefiLib.h> | |
| #include <Library/PcdLib.h> | |
| #include <Library/BaseMemoryLib.h> | |
| #include <Library/UefiBootServicesTableLib.h> | |
| #include <Library/DevicePathLib.h> | |
| #include <Library/MemoryAllocationLib.h> | |
| #include "WinNtBusDriver.h" | |
| extern EFI_GUID gWinNtBusDriverGuid; | |
| // | |
| // DriverBinding protocol global | |
| // | |
| EFI_DRIVER_BINDING_PROTOCOL gWinNtBusDriverBinding = { | |
| WinNtBusDriverBindingSupported, | |
| WinNtBusDriverBindingStart, | |
| WinNtBusDriverBindingStop, | |
| 0xa, | |
| NULL, | |
| NULL | |
| }; | |
| #define NT_PCD_ARRAY_SIZE (sizeof(mPcdEnvironment)/sizeof(NT_PCD_ENTRY)) | |
| // | |
| // Table to map NT Environment variable to the GUID that should be in | |
| // device path. | |
| // | |
| NT_PCD_ENTRY mPcdEnvironment[] = { | |
| PcdToken(PcdWinNtConsole), &gEfiWinNtConsoleGuid, | |
| PcdToken(PcdWinNtGop), &gEfiWinNtGopGuid, | |
| PcdToken(PcdWinNtSerialPort), &gEfiWinNtSerialPortGuid, | |
| PcdToken(PcdWinNtFileSystem), &gEfiWinNtFileSystemGuid, | |
| PcdToken(PcdWinNtVirtualDisk), &gEfiWinNtVirtualDisksGuid, | |
| PcdToken(PcdWinNtPhysicalDisk), &gEfiWinNtPhysicalDisksGuid | |
| }; | |
| /** | |
| The user Entry Point for module WinNtBusDriver. The user code starts with this function. | |
| @param[in] ImageHandle The firmware allocated handle for the EFI image. | |
| @param[in] SystemTable A pointer to the EFI System Table. | |
| @retval EFI_SUCCESS The entry point is executed successfully. | |
| @retval other Some error occurs when executing this entry point. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| InitializeWinNtBusDriver( | |
| IN EFI_HANDLE ImageHandle, | |
| IN EFI_SYSTEM_TABLE *SystemTable | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| // | |
| // Install driver model protocol(s). | |
| // | |
| Status = EfiLibInstallDriverBindingComponentName2 ( | |
| ImageHandle, | |
| SystemTable, | |
| &gWinNtBusDriverBinding, | |
| ImageHandle, | |
| &gWinNtBusDriverComponentName, | |
| &gWinNtBusDriverComponentName2 | |
| ); | |
| ASSERT_EFI_ERROR (Status); | |
| return Status; | |
| } | |
| VOID * | |
| AllocateMemory ( | |
| IN UINTN Size | |
| ) | |
| { | |
| VOID *Buffer; | |
| Buffer = AllocatePool (Size); | |
| ASSERT (Buffer != NULL); | |
| return Buffer; | |
| } | |
| EFI_STATUS | |
| EFIAPI | |
| WinNtBusDriverBindingSupported ( | |
| IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
| IN EFI_HANDLE ControllerHandle, | |
| IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath | |
| ) | |
| /*++ | |
| Routine Description: | |
| Arguments: | |
| Returns: | |
| None | |
| **/ | |
| // TODO: This - add argument and description to function comment | |
| // TODO: ControllerHandle - add argument and description to function comment | |
| // TODO: RemainingDevicePath - add argument and description to function comment | |
| // TODO: EFI_UNSUPPORTED - add return value to function comment | |
| // TODO: EFI_UNSUPPORTED - add return value to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| { | |
| EFI_STATUS Status; | |
| EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath; | |
| EFI_WIN_NT_THUNK_PROTOCOL *WinNtThunk; | |
| UINTN Index; | |
| // | |
| // Check the contents of the first Device Path Node of RemainingDevicePath to make sure | |
| // it is a legal Device Path Node for this bus driver's children. | |
| // | |
| if (RemainingDevicePath != NULL) { | |
| // | |
| // Check if RemainingDevicePath is the End of Device Path Node, | |
| // if yes, go on checking other conditions | |
| // | |
| if (!IsDevicePathEnd (RemainingDevicePath)) { | |
| // | |
| // If RemainingDevicePath isn't the End of Device Path Node, | |
| // check its validation | |
| // | |
| if (RemainingDevicePath->Type != HARDWARE_DEVICE_PATH || | |
| RemainingDevicePath->SubType != HW_VENDOR_DP || | |
| DevicePathNodeLength(RemainingDevicePath) != sizeof(WIN_NT_VENDOR_DEVICE_PATH_NODE)) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| for (Index = 0; Index < NT_PCD_ARRAY_SIZE; Index++) { | |
| if (CompareGuid (&((VENDOR_DEVICE_PATH *) RemainingDevicePath)->Guid, mPcdEnvironment[Index].DevicePathGuid)) { | |
| break; | |
| } | |
| } | |
| if (Index >= NT_PCD_ARRAY_SIZE) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| } | |
| } | |
| // | |
| // Open the IO Abstraction(s) needed to perform the supported test | |
| // | |
| Status = gBS->OpenProtocol ( | |
| ControllerHandle, | |
| &gEfiWinNtThunkProtocolGuid, | |
| (VOID **) &WinNtThunk, | |
| This->DriverBindingHandle, | |
| ControllerHandle, | |
| EFI_OPEN_PROTOCOL_BY_DRIVER | |
| ); | |
| if (Status == EFI_ALREADY_STARTED) { | |
| return EFI_SUCCESS; | |
| } | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| // | |
| // Close the I/O Abstraction(s) used to perform the supported test | |
| // | |
| gBS->CloseProtocol ( | |
| ControllerHandle, | |
| &gEfiWinNtThunkProtocolGuid, | |
| This->DriverBindingHandle, | |
| ControllerHandle | |
| ); | |
| // | |
| // Open the EFI Device Path protocol needed to perform the supported test | |
| // | |
| Status = gBS->OpenProtocol ( | |
| ControllerHandle, | |
| &gEfiDevicePathProtocolGuid, | |
| (VOID **) &ParentDevicePath, | |
| This->DriverBindingHandle, | |
| ControllerHandle, | |
| EFI_OPEN_PROTOCOL_BY_DRIVER | |
| ); | |
| if (Status == EFI_ALREADY_STARTED) { | |
| return EFI_SUCCESS; | |
| } | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| // | |
| // Since we call through WinNtThunk we need to make sure it's valid | |
| // | |
| Status = EFI_SUCCESS; | |
| if (WinNtThunk->Signature != EFI_WIN_NT_THUNK_PROTOCOL_SIGNATURE) { | |
| Status = EFI_UNSUPPORTED; | |
| } | |
| // | |
| // Close protocol, don't use device path protocol in the Support() function | |
| // | |
| gBS->CloseProtocol ( | |
| ControllerHandle, | |
| &gEfiDevicePathProtocolGuid, | |
| This->DriverBindingHandle, | |
| ControllerHandle | |
| ); | |
| return Status; | |
| } | |
| EFI_STATUS | |
| EFIAPI | |
| WinNtBusDriverBindingStart ( | |
| IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
| IN EFI_HANDLE ControllerHandle, | |
| IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath | |
| ) | |
| /*++ | |
| Routine Description: | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: This - add argument and description to function comment | |
| // TODO: ControllerHandle - add argument and description to function comment | |
| // TODO: RemainingDevicePath - add argument and description to function comment | |
| // TODO: EFI_OUT_OF_RESOURCES - add return value to function comment | |
| // TODO: EFI_OUT_OF_RESOURCES - add return value to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| { | |
| EFI_STATUS Status; | |
| EFI_WIN_NT_THUNK_PROTOCOL *WinNtThunk; | |
| EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath; | |
| WIN_NT_BUS_DEVICE *WinNtBusDevice; | |
| WIN_NT_IO_DEVICE *WinNtDevice; | |
| UINTN Index; | |
| CHAR16 *StartString; | |
| CHAR16 *SubString; | |
| UINT16 Count; | |
| UINTN StringSize; | |
| UINT16 ComponentName[MAX_NT_ENVIRNMENT_VARIABLE_LENGTH]; | |
| WIN_NT_VENDOR_DEVICE_PATH_NODE *Node; | |
| BOOLEAN CreateDevice; | |
| CHAR16 *TempStr; | |
| CHAR16 *PcdTempStr; | |
| UINTN TempStrSize; | |
| Status = EFI_UNSUPPORTED; | |
| // | |
| // Grab the protocols we need | |
| // | |
| Status = gBS->OpenProtocol ( | |
| ControllerHandle, | |
| &gEfiDevicePathProtocolGuid, | |
| (VOID **) &ParentDevicePath, | |
| This->DriverBindingHandle, | |
| ControllerHandle, | |
| EFI_OPEN_PROTOCOL_BY_DRIVER | |
| ); | |
| if (EFI_ERROR (Status) && Status != EFI_ALREADY_STARTED) { | |
| return Status; | |
| } | |
| Status = gBS->OpenProtocol ( | |
| ControllerHandle, | |
| &gEfiWinNtThunkProtocolGuid, | |
| (VOID **) &WinNtThunk, | |
| This->DriverBindingHandle, | |
| ControllerHandle, | |
| EFI_OPEN_PROTOCOL_BY_DRIVER | |
| ); | |
| if (EFI_ERROR (Status) && Status != EFI_ALREADY_STARTED) { | |
| return Status; | |
| } | |
| if (Status != EFI_ALREADY_STARTED) { | |
| WinNtBusDevice = AllocatePool (sizeof (WIN_NT_BUS_DEVICE)); | |
| if (WinNtBusDevice == NULL) { | |
| return EFI_OUT_OF_RESOURCES; | |
| } | |
| WinNtBusDevice->Signature = WIN_NT_BUS_DEVICE_SIGNATURE; | |
| WinNtBusDevice->ControllerNameTable = NULL; | |
| AddUnicodeString2 ( | |
| "eng", | |
| gWinNtBusDriverComponentName.SupportedLanguages, | |
| &WinNtBusDevice->ControllerNameTable, | |
| L"Windows Bus Controller", | |
| TRUE | |
| ); | |
| AddUnicodeString2 ( | |
| "en", | |
| gWinNtBusDriverComponentName2.SupportedLanguages, | |
| &WinNtBusDevice->ControllerNameTable, | |
| L"Windows Bus Controller", | |
| FALSE | |
| ); | |
| Status = gBS->InstallMultipleProtocolInterfaces ( | |
| &ControllerHandle, | |
| &gWinNtBusDriverGuid, | |
| WinNtBusDevice, | |
| NULL | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| FreeUnicodeStringTable (WinNtBusDevice->ControllerNameTable); | |
| FreePool (WinNtBusDevice); | |
| return Status; | |
| } | |
| } | |
| // | |
| // Loop on the Variable list. Parse each variable to produce a set of handles that | |
| // represent virtual hardware devices. | |
| // | |
| for (Index = 0; Index < NT_PCD_ARRAY_SIZE; Index++) { | |
| PcdTempStr = (VOID *)LibPcdGetPtr (mPcdEnvironment[Index].Token); | |
| ASSERT (PcdTempStr != NULL); | |
| TempStrSize = StrLen (PcdTempStr); | |
| TempStr = AllocateMemory ((TempStrSize * sizeof (CHAR16)) + 1); | |
| StrCpy (TempStr, PcdTempStr); | |
| StartString = TempStr; | |
| // | |
| // Parse the envirnment variable into sub strings using '!' as a delimator. | |
| // Each substring needs it's own handle to be added to the system. This code | |
| // does not understand the sub string. Thats the device drivers job. | |
| // | |
| Count = 0; | |
| while (*StartString != '\0') { | |
| // | |
| // Find the end of the sub string | |
| // | |
| SubString = StartString; | |
| while (*SubString != '\0' && *SubString != '!') { | |
| SubString++; | |
| } | |
| if (*SubString == '!') { | |
| // | |
| // Replace token with '\0' to make sub strings. If this is the end | |
| // of the string SubString will already point to NULL. | |
| // | |
| *SubString = '\0'; | |
| SubString++; | |
| } | |
| CreateDevice = TRUE; | |
| if (RemainingDevicePath != NULL) { | |
| CreateDevice = FALSE; | |
| // | |
| // Check if RemainingDevicePath is the End of Device Path Node, | |
| // if yes, don't create any child device | |
| // | |
| if (!IsDevicePathEnd (RemainingDevicePath)) { | |
| // | |
| // If RemainingDevicePath isn't the End of Device Path Node, | |
| // check its validation | |
| // | |
| Node = (WIN_NT_VENDOR_DEVICE_PATH_NODE *) RemainingDevicePath; | |
| if (Node->VendorDevicePath.Header.Type == HARDWARE_DEVICE_PATH && | |
| Node->VendorDevicePath.Header.SubType == HW_VENDOR_DP && | |
| DevicePathNodeLength (&Node->VendorDevicePath.Header) == sizeof (WIN_NT_VENDOR_DEVICE_PATH_NODE) | |
| ) { | |
| if (CompareGuid (&Node->VendorDevicePath.Guid, mPcdEnvironment[Index].DevicePathGuid) && | |
| Node->Instance == Count | |
| ) { | |
| CreateDevice = TRUE; | |
| } | |
| } | |
| } | |
| } | |
| if (CreateDevice) { | |
| // | |
| // Allocate instance structure, and fill in parent information. | |
| // | |
| WinNtDevice = AllocateMemory (sizeof (WIN_NT_IO_DEVICE)); | |
| if (WinNtDevice == NULL) { | |
| return EFI_OUT_OF_RESOURCES; | |
| } | |
| WinNtDevice->Handle = NULL; | |
| WinNtDevice->ControllerHandle = ControllerHandle; | |
| WinNtDevice->ParentDevicePath = ParentDevicePath; | |
| WinNtDevice->WinNtIo.WinNtThunk = WinNtThunk; | |
| // | |
| // Plus 2 to account for the NULL at the end of the Unicode string | |
| // | |
| StringSize = (UINTN) ((UINT8 *) SubString - (UINT8 *) StartString) + sizeof (CHAR16); | |
| WinNtDevice->WinNtIo.EnvString = AllocateMemory (StringSize); | |
| if (WinNtDevice->WinNtIo.EnvString != NULL) { | |
| CopyMem (WinNtDevice->WinNtIo.EnvString, StartString, StringSize); | |
| } | |
| WinNtDevice->ControllerNameTable = NULL; | |
| WinNtThunk->SPrintf (ComponentName, sizeof (ComponentName), L"%s", WinNtDevice->WinNtIo.EnvString); | |
| WinNtDevice->DevicePath = WinNtBusCreateDevicePath ( | |
| ParentDevicePath, | |
| mPcdEnvironment[Index].DevicePathGuid, | |
| Count | |
| ); | |
| if (WinNtDevice->DevicePath == NULL) { | |
| FreePool (WinNtDevice); | |
| return EFI_OUT_OF_RESOURCES; | |
| } | |
| AddUnicodeString2 ( | |
| "eng", | |
| gWinNtBusDriverComponentName.SupportedLanguages, | |
| &WinNtDevice->ControllerNameTable, | |
| ComponentName, | |
| TRUE | |
| ); | |
| AddUnicodeString2 ( | |
| "en", | |
| gWinNtBusDriverComponentName2.SupportedLanguages, | |
| &WinNtDevice->ControllerNameTable, | |
| ComponentName, | |
| FALSE | |
| ); | |
| WinNtDevice->WinNtIo.TypeGuid = mPcdEnvironment[Index].DevicePathGuid; | |
| WinNtDevice->WinNtIo.InstanceNumber = Count; | |
| WinNtDevice->Signature = WIN_NT_IO_DEVICE_SIGNATURE; | |
| Status = gBS->InstallMultipleProtocolInterfaces ( | |
| &WinNtDevice->Handle, | |
| &gEfiDevicePathProtocolGuid, | |
| WinNtDevice->DevicePath, | |
| &gEfiWinNtIoProtocolGuid, | |
| &WinNtDevice->WinNtIo, | |
| NULL | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| FreeUnicodeStringTable (WinNtDevice->ControllerNameTable); | |
| FreePool (WinNtDevice); | |
| } else { | |
| // | |
| // Open For Child Device | |
| // | |
| Status = gBS->OpenProtocol ( | |
| ControllerHandle, | |
| &gEfiWinNtThunkProtocolGuid, | |
| (VOID **) &WinNtThunk, | |
| This->DriverBindingHandle, | |
| WinNtDevice->Handle, | |
| EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER | |
| ); | |
| } | |
| } | |
| // | |
| // Parse Next sub string. This will point to '\0' if we are at the end. | |
| // | |
| Count++; | |
| StartString = SubString; | |
| } | |
| FreePool (TempStr); | |
| } | |
| return EFI_SUCCESS; | |
| } | |
| EFI_STATUS | |
| EFIAPI | |
| WinNtBusDriverBindingStop ( | |
| IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
| IN EFI_HANDLE ControllerHandle, | |
| IN UINTN NumberOfChildren, | |
| IN EFI_HANDLE *ChildHandleBuffer | |
| ) | |
| /*++ | |
| Routine Description: | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: This - add argument and description to function comment | |
| // TODO: ControllerHandle - add argument and description to function comment | |
| // TODO: NumberOfChildren - add argument and description to function comment | |
| // TODO: ChildHandleBuffer - add argument and description to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| // TODO: EFI_DEVICE_ERROR - add return value to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| { | |
| EFI_STATUS Status; | |
| UINTN Index; | |
| BOOLEAN AllChildrenStopped; | |
| EFI_WIN_NT_IO_PROTOCOL *WinNtIo; | |
| WIN_NT_BUS_DEVICE *WinNtBusDevice; | |
| WIN_NT_IO_DEVICE *WinNtDevice; | |
| EFI_WIN_NT_THUNK_PROTOCOL *WinNtThunk; | |
| // | |
| // Complete all outstanding transactions to Controller. | |
| // Don't allow any new transaction to Controller to be started. | |
| // | |
| if (NumberOfChildren == 0) { | |
| // | |
| // Close the bus driver | |
| // | |
| Status = gBS->OpenProtocol ( | |
| ControllerHandle, | |
| &gWinNtBusDriverGuid, | |
| (VOID **) &WinNtBusDevice, | |
| This->DriverBindingHandle, | |
| ControllerHandle, | |
| EFI_OPEN_PROTOCOL_GET_PROTOCOL | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| gBS->UninstallMultipleProtocolInterfaces ( | |
| ControllerHandle, | |
| &gWinNtBusDriverGuid, | |
| WinNtBusDevice, | |
| NULL | |
| ); | |
| FreeUnicodeStringTable (WinNtBusDevice->ControllerNameTable); | |
| FreePool (WinNtBusDevice); | |
| gBS->CloseProtocol ( | |
| ControllerHandle, | |
| &gEfiWinNtThunkProtocolGuid, | |
| This->DriverBindingHandle, | |
| ControllerHandle | |
| ); | |
| gBS->CloseProtocol ( | |
| ControllerHandle, | |
| &gEfiDevicePathProtocolGuid, | |
| This->DriverBindingHandle, | |
| ControllerHandle | |
| ); | |
| return EFI_SUCCESS; | |
| } | |
| AllChildrenStopped = TRUE; | |
| for (Index = 0; Index < NumberOfChildren; Index++) { | |
| Status = gBS->OpenProtocol ( | |
| ChildHandleBuffer[Index], | |
| &gEfiWinNtIoProtocolGuid, | |
| (VOID **) &WinNtIo, | |
| This->DriverBindingHandle, | |
| ControllerHandle, | |
| EFI_OPEN_PROTOCOL_GET_PROTOCOL | |
| ); | |
| if (!EFI_ERROR (Status)) { | |
| WinNtDevice = WIN_NT_IO_DEVICE_FROM_THIS (WinNtIo); | |
| Status = gBS->CloseProtocol ( | |
| ControllerHandle, | |
| &gEfiWinNtThunkProtocolGuid, | |
| This->DriverBindingHandle, | |
| WinNtDevice->Handle | |
| ); | |
| Status = gBS->UninstallMultipleProtocolInterfaces ( | |
| WinNtDevice->Handle, | |
| &gEfiDevicePathProtocolGuid, | |
| WinNtDevice->DevicePath, | |
| &gEfiWinNtIoProtocolGuid, | |
| &WinNtDevice->WinNtIo, | |
| NULL | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| gBS->OpenProtocol ( | |
| ControllerHandle, | |
| &gEfiWinNtThunkProtocolGuid, | |
| (VOID **) &WinNtThunk, | |
| This->DriverBindingHandle, | |
| WinNtDevice->Handle, | |
| EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER | |
| ); | |
| } else { | |
| // | |
| // Close the child handle | |
| // | |
| FreeUnicodeStringTable (WinNtDevice->ControllerNameTable); | |
| FreePool (WinNtDevice); | |
| } | |
| } | |
| if (EFI_ERROR (Status)) { | |
| AllChildrenStopped = FALSE; | |
| } | |
| } | |
| if (!AllChildrenStopped) { | |
| return EFI_DEVICE_ERROR; | |
| } | |
| return EFI_SUCCESS; | |
| } | |
| EFI_DEVICE_PATH_PROTOCOL * | |
| WinNtBusCreateDevicePath ( | |
| IN EFI_DEVICE_PATH_PROTOCOL *RootDevicePath, | |
| IN EFI_GUID *Guid, | |
| IN UINT16 InstanceNumber | |
| ) | |
| /*++ | |
| Routine Description: | |
| Create a device path node using Guid and InstanceNumber and append it to | |
| the passed in RootDevicePath | |
| Arguments: | |
| RootDevicePath - Root of the device path to return. | |
| Guid - GUID to use in vendor device path node. | |
| InstanceNumber - Instance number to use in the vendor device path. This | |
| argument is needed to make sure each device path is unique. | |
| Returns: | |
| EFI_DEVICE_PATH_PROTOCOL | |
| --*/ | |
| { | |
| WIN_NT_VENDOR_DEVICE_PATH_NODE DevicePath; | |
| DevicePath.VendorDevicePath.Header.Type = HARDWARE_DEVICE_PATH; | |
| DevicePath.VendorDevicePath.Header.SubType = HW_VENDOR_DP; | |
| SetDevicePathNodeLength (&DevicePath.VendorDevicePath.Header, sizeof (WIN_NT_VENDOR_DEVICE_PATH_NODE)); | |
| // | |
| // The GUID defines the Class | |
| // | |
| CopyMem (&DevicePath.VendorDevicePath.Guid, Guid, sizeof (EFI_GUID)); | |
| // | |
| // Add an instance number so we can make sure there are no Device Path | |
| // duplication. | |
| // | |
| DevicePath.Instance = InstanceNumber; | |
| return AppendDevicePathNode ( | |
| RootDevicePath, | |
| (EFI_DEVICE_PATH_PROTOCOL *) &DevicePath | |
| ); | |
| } |