/** @file | |
Driver implementing the Tiano Legacy 8259 Protocol | |
Copyright (c) 2005 - 2009, Intel Corporation. All rights reserved.<BR> | |
This program and the accompanying materials | |
are licensed and made available under the terms and conditions of the BSD License | |
which accompanies this distribution. The full text of the license may be found at | |
http://opensource.org/licenses/bsd-license.php. | |
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
**/ | |
#ifndef _8259_H__ | |
#define _8259_H__ | |
#include <FrameworkDxe.h> | |
#include <Protocol/Legacy8259.h> | |
#include <Protocol/PciIo.h> | |
#include <Library/UefiBootServicesTableLib.h> | |
#include <Library/DebugLib.h> | |
#include <Library/IoLib.h> | |
#include <Library/BaseLib.h> | |
#include <Library/PcdLib.h> | |
#include <IndustryStandard/Pci.h> | |
// 8259 Hardware definitions | |
#define LEGACY_MODE_BASE_VECTOR_MASTER 0x08 | |
#define LEGACY_MODE_BASE_VECTOR_SLAVE 0x70 | |
#define PROTECTED_MODE_BASE_VECTOR_MASTER 0x68 | |
#define PROTECTED_MODE_BASE_VECTOR_SLAVE 0x70 | |
#define LEGACY_8259_CONTROL_REGISTER_MASTER 0x20 | |
#define LEGACY_8259_MASK_REGISTER_MASTER 0x21 | |
#define LEGACY_8259_CONTROL_REGISTER_SLAVE 0xA0 | |
#define LEGACY_8259_MASK_REGISTER_SLAVE 0xA1 | |
#define LEGACY_8259_EDGE_LEVEL_TRIGGERED_REGISTER_MASTER 0x4D0 | |
#define LEGACY_8259_EDGE_LEVEL_TRIGGERED_REGISTER_SLAVE 0x4D1 | |
#define LEGACY_8259_EOI 0x20 | |
// Protocol Function Prototypes | |
/** | |
Sets the base address for the 8259 master and slave PICs. | |
@param[in] This Indicates the EFI_LEGACY_8259_PROTOCOL instance. | |
@param[in] MasterBase Interrupt vectors for IRQ0-IRQ7. | |
@param[in] SlaveBase Interrupt vectors for IRQ8-IRQ15. | |
@retval EFI_SUCCESS The 8259 PIC was programmed successfully. | |
@retval EFI_DEVICE_ERROR There was an error while writing to the 8259 PIC. | |
**/ | |
EFI_STATUS | |
EFIAPI | |
Interrupt8259SetVectorBase ( | |
IN EFI_LEGACY_8259_PROTOCOL *This, | |
IN UINT8 MasterBase, | |
IN UINT8 SlaveBase | |
); | |
/** | |
Gets the current 16-bit real mode and 32-bit protected-mode IRQ masks. | |
@param[in] This Indicates the EFI_LEGACY_8259_PROTOCOL instance. | |
@param[out] LegacyMask 16-bit mode interrupt mask for IRQ0-IRQ15. | |
@param[out] LegacyEdgeLevel 16-bit mode edge/level mask for IRQ-IRQ15. | |
@param[out] ProtectedMask 32-bit mode interrupt mask for IRQ0-IRQ15. | |
@param[out] ProtectedEdgeLevel 32-bit mode edge/level mask for IRQ0-IRQ15. | |
@retval EFI_SUCCESS The 8259 PIC was programmed successfully. | |
@retval EFI_DEVICE_ERROR There was an error while reading the 8259 PIC. | |
**/ | |
EFI_STATUS | |
EFIAPI | |
Interrupt8259GetMask ( | |
IN EFI_LEGACY_8259_PROTOCOL *This, | |
OUT UINT16 *LegacyMask, OPTIONAL | |
OUT UINT16 *LegacyEdgeLevel, OPTIONAL | |
OUT UINT16 *ProtectedMask, OPTIONAL | |
OUT UINT16 *ProtectedEdgeLevel OPTIONAL | |
); | |
/** | |
Sets the current 16-bit real mode and 32-bit protected-mode IRQ masks. | |
@param[in] This Indicates the EFI_LEGACY_8259_PROTOCOL instance. | |
@param[in] LegacyMask 16-bit mode interrupt mask for IRQ0-IRQ15. | |
@param[in] LegacyEdgeLevel 16-bit mode edge/level mask for IRQ-IRQ15. | |
@param[in] ProtectedMask 32-bit mode interrupt mask for IRQ0-IRQ15. | |
@param[in] ProtectedEdgeLevel 32-bit mode edge/level mask for IRQ0-IRQ15. | |
@retval EFI_SUCCESS The 8259 PIC was programmed successfully. | |
@retval EFI_DEVICE_ERROR There was an error while writing the 8259 PIC. | |
**/ | |
EFI_STATUS | |
EFIAPI | |
Interrupt8259SetMask ( | |
IN EFI_LEGACY_8259_PROTOCOL *This, | |
IN UINT16 *LegacyMask, OPTIONAL | |
IN UINT16 *LegacyEdgeLevel, OPTIONAL | |
IN UINT16 *ProtectedMask, OPTIONAL | |
IN UINT16 *ProtectedEdgeLevel OPTIONAL | |
); | |
/** | |
Sets the mode of the PICs. | |
@param[in] This Indicates the EFI_LEGACY_8259_PROTOCOL instance. | |
@param[in] Mode 16-bit real or 32-bit protected mode. | |
@param[in] Mask The value with which to set the interrupt mask. | |
@param[in] EdgeLevel The value with which to set the edge/level mask. | |
@retval EFI_SUCCESS The mode was set successfully. | |
@retval EFI_INVALID_PARAMETER The mode was not set. | |
**/ | |
EFI_STATUS | |
EFIAPI | |
Interrupt8259SetMode ( | |
IN EFI_LEGACY_8259_PROTOCOL *This, | |
IN EFI_8259_MODE Mode, | |
IN UINT16 *Mask, OPTIONAL | |
IN UINT16 *EdgeLevel OPTIONAL | |
); | |
/** | |
Translates the IRQ into a vector. | |
@param[in] This Indicates the EFI_LEGACY_8259_PROTOCOL instance. | |
@param[in] Irq IRQ0-IRQ15. | |
@param[out] Vector The vector that is assigned to the IRQ. | |
@retval EFI_SUCCESS The Vector that matches Irq was returned. | |
@retval EFI_INVALID_PARAMETER Irq is not valid. | |
**/ | |
EFI_STATUS | |
EFIAPI | |
Interrupt8259GetVector ( | |
IN EFI_LEGACY_8259_PROTOCOL *This, | |
IN EFI_8259_IRQ Irq, | |
OUT UINT8 *Vector | |
); | |
/** | |
Enables the specified IRQ. | |
@param[in] This Indicates the EFI_LEGACY_8259_PROTOCOL instance. | |
@param[in] Irq IRQ0-IRQ15. | |
@param[in] LevelTriggered 0 = Edge triggered; 1 = Level triggered. | |
@retval EFI_SUCCESS The Irq was enabled on the 8259 PIC. | |
@retval EFI_INVALID_PARAMETER The Irq is not valid. | |
**/ | |
EFI_STATUS | |
EFIAPI | |
Interrupt8259EnableIrq ( | |
IN EFI_LEGACY_8259_PROTOCOL *This, | |
IN EFI_8259_IRQ Irq, | |
IN BOOLEAN LevelTriggered | |
); | |
/** | |
Disables the specified IRQ. | |
@param[in] This Indicates the EFI_LEGACY_8259_PROTOCOL instance. | |
@param[in] Irq IRQ0-IRQ15. | |
@retval EFI_SUCCESS The Irq was disabled on the 8259 PIC. | |
@retval EFI_INVALID_PARAMETER The Irq is not valid. | |
**/ | |
EFI_STATUS | |
EFIAPI | |
Interrupt8259DisableIrq ( | |
IN EFI_LEGACY_8259_PROTOCOL *This, | |
IN EFI_8259_IRQ Irq | |
); | |
/** | |
Reads the PCI configuration space to get the interrupt number that is assigned to the card. | |
@param[in] This Indicates the EFI_LEGACY_8259_PROTOCOL instance. | |
@param[in] PciHandle PCI function for which to return the vector. | |
@param[out] Vector IRQ number that corresponds to the interrupt line. | |
@retval EFI_SUCCESS The interrupt line value was read successfully. | |
**/ | |
EFI_STATUS | |
EFIAPI | |
Interrupt8259GetInterruptLine ( | |
IN EFI_LEGACY_8259_PROTOCOL *This, | |
IN EFI_HANDLE PciHandle, | |
OUT UINT8 *Vector | |
); | |
/** | |
Issues the End of Interrupt (EOI) commands to PICs. | |
@param[in] This Indicates the EFI_LEGACY_8259_PROTOCOL instance. | |
@param[in] Irq The interrupt for which to issue the EOI command. | |
@retval EFI_SUCCESS The EOI command was issued. | |
@retval EFI_INVALID_PARAMETER The Irq is not valid. | |
**/ | |
EFI_STATUS | |
EFIAPI | |
Interrupt8259EndOfInterrupt ( | |
IN EFI_LEGACY_8259_PROTOCOL *This, | |
IN EFI_8259_IRQ Irq | |
); | |
#endif |