Myles Watson | 90ee15b | 2017-02-09 16:47:33 -0800 | [diff] [blame] | 1 | // |
| 2 | // Copyright 2016 The Android Open Source Project |
| 3 | // |
| 4 | // Licensed under the Apache License, Version 2.0 (the "License"); |
| 5 | // you may not use this file except in compliance with the License. |
| 6 | // You may obtain a copy of the License at |
| 7 | // |
| 8 | // http://www.apache.org/licenses/LICENSE-2.0 |
| 9 | // |
| 10 | // Unless required by applicable law or agreed to in writing, software |
| 11 | // distributed under the License is distributed on an "AS IS" BASIS, |
| 12 | // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| 13 | // See the License for the specific language governing permissions and |
| 14 | // limitations under the License. |
| 15 | // |
| 16 | |
| 17 | #define LOG_TAG "android.hardware.bluetooth@1.0.hikey" |
| 18 | |
| 19 | #include "bluetooth_hci.h" |
| 20 | |
| 21 | #include <utils/Log.h> |
| 22 | |
| 23 | #include <android-base/logging.h> |
| 24 | |
| 25 | #include "hci_internals.h" |
| 26 | |
| 27 | namespace { |
| 28 | |
| 29 | using android::hardware::bluetooth::V1_0::hikey::BluetoothHci; |
| 30 | using android::hardware::hidl_vec; |
| 31 | |
| 32 | BluetoothHci* g_bluetooth_hci = nullptr; |
| 33 | |
| 34 | size_t write_safely(int fd, const uint8_t* data, size_t length) { |
| 35 | size_t transmitted_length = 0; |
| 36 | while (length > 0) { |
| 37 | ssize_t ret = |
| 38 | TEMP_FAILURE_RETRY(write(fd, data + transmitted_length, length)); |
| 39 | |
| 40 | if (ret == -1) { |
| 41 | if (errno == EAGAIN) continue; |
| 42 | ALOGE("%s error writing to UART (%s)", __func__, strerror(errno)); |
| 43 | break; |
| 44 | |
| 45 | } else if (ret == 0) { |
| 46 | // Nothing written :( |
| 47 | ALOGE("%s zero bytes written - something went wrong...", __func__); |
| 48 | break; |
| 49 | } |
| 50 | |
| 51 | transmitted_length += ret; |
| 52 | length -= ret; |
| 53 | } |
| 54 | |
| 55 | return transmitted_length; |
| 56 | } |
| 57 | |
| 58 | } // namespace |
| 59 | |
| 60 | namespace android { |
| 61 | namespace hardware { |
| 62 | namespace bluetooth { |
| 63 | namespace V1_0 { |
| 64 | namespace hikey { |
| 65 | |
| 66 | Return<void> BluetoothHci::initialize( |
| 67 | const ::android::sp<IBluetoothHciCallbacks>& cb) { |
| 68 | ALOGI("BluetoothHci::initialize()"); |
| 69 | |
| 70 | CHECK(cb != nullptr); |
| 71 | event_cb_ = cb; |
| 72 | |
| 73 | hci_tty_fd_ = open("/dev/hci_tty", O_RDWR); |
| 74 | if (hci_tty_fd_ < 0) { |
| 75 | ALOGE("%s: Can't open hci_tty", __func__); |
| 76 | event_cb_->initializationComplete(Status::INITIALIZATION_ERROR); |
| 77 | } |
| 78 | |
| 79 | CHECK(g_bluetooth_hci == nullptr) << __func__ << " is not reentrant"; |
| 80 | g_bluetooth_hci = this; |
| 81 | |
| 82 | fd_watcher_.WatchFdForNonBlockingReads( |
| 83 | hci_tty_fd_, [this](int fd) { hci_packetizer_.OnDataReadyHikey(fd); }); |
| 84 | |
| 85 | event_cb_->initializationComplete(Status::SUCCESS); |
| 86 | return Void(); |
| 87 | } |
| 88 | |
| 89 | Return<void> BluetoothHci::close() { |
| 90 | ALOGW("BluetoothHci::close()"); |
| 91 | ::close(hci_tty_fd_); |
| 92 | hci_tty_fd_ = -1; |
| 93 | g_bluetooth_hci = nullptr; |
| 94 | return Void(); |
| 95 | } |
| 96 | |
| 97 | Return<void> BluetoothHci::sendHciCommand(const hidl_vec<uint8_t>& packet) { |
| 98 | uint8_t type = HCI_PACKET_TYPE_COMMAND; |
| 99 | int rv = write_safely(hci_tty_fd_, &type, sizeof(type)); |
| 100 | if (rv == sizeof(type)) |
| 101 | rv = write_safely(hci_tty_fd_, packet.data(), packet.size()); |
| 102 | return Void(); |
| 103 | } |
| 104 | |
| 105 | Return<void> BluetoothHci::sendAclData(const hidl_vec<uint8_t>& packet) { |
| 106 | uint8_t type = HCI_PACKET_TYPE_ACL_DATA; |
| 107 | int rv = write_safely(hci_tty_fd_, &type, sizeof(type)); |
| 108 | if (rv == sizeof(type)) |
| 109 | rv = write_safely(hci_tty_fd_, packet.data(), packet.size()); |
| 110 | return Void(); |
| 111 | } |
| 112 | |
| 113 | Return<void> BluetoothHci::sendScoData(const hidl_vec<uint8_t>& packet) { |
| 114 | uint8_t type = HCI_PACKET_TYPE_SCO_DATA; |
| 115 | int rv = write_safely(hci_tty_fd_, &type, sizeof(type)); |
| 116 | if (rv == sizeof(type)) |
| 117 | rv = write_safely(hci_tty_fd_, packet.data(), packet.size()); |
| 118 | return Void(); |
| 119 | } |
| 120 | |
| 121 | BluetoothHci* BluetoothHci::get() { return g_bluetooth_hci; } |
| 122 | |
| 123 | void BluetoothHci::OnPacketReady() { |
| 124 | BluetoothHci::get()->HandleIncomingPacket(); |
| 125 | } |
| 126 | |
| 127 | void BluetoothHci::HandleIncomingPacket() { |
| 128 | HciPacketType hci_packet_type = hci_packetizer_.GetPacketType(); |
| 129 | hidl_vec<uint8_t> hci_packet = hci_packetizer_.GetPacket(); |
| 130 | |
| 131 | switch (hci_packet_type) { |
| 132 | case HCI_PACKET_TYPE_EVENT: |
| 133 | event_cb_->hciEventReceived(hci_packet); |
| 134 | break; |
| 135 | case HCI_PACKET_TYPE_ACL_DATA: |
| 136 | event_cb_->aclDataReceived(hci_packet); |
| 137 | break; |
| 138 | case HCI_PACKET_TYPE_SCO_DATA: |
| 139 | event_cb_->scoDataReceived(hci_packet); |
| 140 | break; |
| 141 | default: { |
| 142 | bool hci_packet_type_corrupted = true; |
| 143 | CHECK(hci_packet_type_corrupted == false); |
| 144 | } |
| 145 | } |
| 146 | } |
| 147 | |
| 148 | } // namespace hikey |
| 149 | } // namespace V1_0 |
| 150 | } // namespace bluetooth |
| 151 | } // namespace hardware |
| 152 | } // namespace android |