John Stultz | 18814f6 | 2018-02-22 16:02:49 -0800 | [diff] [blame^] | 1 | /* |
| 2 | * Copyright (C) 2010-2017 ARM Limited. All rights reserved. |
| 3 | * |
| 4 | * Copyright (C) 2008 The Android Open Source Project |
| 5 | * |
| 6 | * Licensed under the Apache License, Version 2.0 (the "License"); |
| 7 | * you may not use this file except in compliance with the License. |
| 8 | * You may obtain a copy of the License at |
| 9 | * |
| 10 | * http://www.apache.org/licenses/LICENSE-2.0 |
| 11 | * |
| 12 | * Unless required by applicable law or agreed to in writing, software |
| 13 | * distributed under the License is distributed on an "AS IS" BASIS, |
| 14 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| 15 | * See the License for the specific language governing permissions and |
| 16 | * limitations under the License. |
| 17 | */ |
| 18 | |
| 19 | #include <string.h> |
| 20 | #include <errno.h> |
| 21 | #include <pthread.h> |
| 22 | #include <stdlib.h> |
| 23 | |
| 24 | #include <cutils/log.h> |
| 25 | #include <cutils/atomic.h> |
| 26 | #include <hardware/hardware.h> |
| 27 | #include <hardware/gralloc.h> |
| 28 | |
| 29 | #include <sys/ioctl.h> |
| 30 | |
| 31 | #include "mali_gralloc_module.h" |
| 32 | #include "alloc_device.h" |
| 33 | #include "gralloc_priv.h" |
| 34 | #include "gralloc_helper.h" |
| 35 | #include "framebuffer_device.h" |
| 36 | #include "mali_gralloc_ion.h" |
| 37 | #include "gralloc_buffer_priv.h" |
| 38 | #include "mali_gralloc_bufferdescriptor.h" |
| 39 | #include "mali_gralloc_bufferallocation.h" |
| 40 | #include "mali_gralloc_formats.h" |
| 41 | #include "mali_gralloc_usages.h" |
| 42 | |
| 43 | static int alloc_device_alloc(alloc_device_t *dev, int w, int h, int format, int usage, buffer_handle_t *pHandle, |
| 44 | int *pStride) |
| 45 | { |
| 46 | mali_gralloc_module *m; |
| 47 | int err = -EINVAL; |
| 48 | |
| 49 | if (!dev || !pHandle || !pStride) |
| 50 | { |
| 51 | return err; |
| 52 | } |
| 53 | |
| 54 | m = reinterpret_cast<private_module_t *>(dev->common.module); |
| 55 | |
| 56 | #if GRALLOC_FB_SWAP_RED_BLUE == 1 |
| 57 | |
| 58 | /* match the framebuffer format */ |
| 59 | if (usage & GRALLOC_USAGE_HW_FB) |
| 60 | { |
| 61 | #ifdef GRALLOC_16_BITS |
| 62 | format = HAL_PIXEL_FORMAT_RGB_565; |
| 63 | #else |
| 64 | format = HAL_PIXEL_FORMAT_BGRA_8888; |
| 65 | #endif |
| 66 | } |
| 67 | |
| 68 | #endif |
| 69 | |
| 70 | #if DISABLE_FRAMEBUFFER_HAL != 1 |
| 71 | |
| 72 | if (usage & GRALLOC_USAGE_HW_FB) |
| 73 | { |
| 74 | int byte_stride; |
| 75 | int pixel_stride; |
| 76 | |
| 77 | err = fb_alloc_framebuffer(m, usage, usage, pHandle, &pixel_stride, &byte_stride); |
| 78 | |
| 79 | if (err >= 0) |
| 80 | { |
| 81 | private_handle_t *hnd = (private_handle_t *)*pHandle; |
| 82 | |
| 83 | /* Allocate a meta-data buffer for framebuffer too. fbhal |
| 84 | * ones wont need it but it will lead to binder IPC fail |
| 85 | * without a valid share_attr_fd. |
| 86 | * |
| 87 | * Explicitly ignore allocation errors since it is not critical to have |
| 88 | */ |
| 89 | (void)gralloc_buffer_attr_allocate(hnd); |
| 90 | |
| 91 | hnd->req_format = format; |
| 92 | hnd->yuv_info = MALI_YUV_BT601_NARROW; |
| 93 | hnd->internal_format = format; |
| 94 | hnd->byte_stride = byte_stride; |
| 95 | hnd->width = w; |
| 96 | hnd->height = h; |
| 97 | hnd->stride = pixel_stride; |
| 98 | hnd->internalWidth = w; |
| 99 | hnd->internalHeight = h; |
| 100 | } |
| 101 | } |
| 102 | else |
| 103 | #endif |
| 104 | { |
| 105 | /* share the same allocation interface with gralloc1.*/ |
| 106 | buffer_descriptor_t buffer_descriptor; |
| 107 | gralloc_buffer_descriptor_t gralloc_buffer_descriptor[1]; |
| 108 | |
| 109 | buffer_descriptor.hal_format = format; |
| 110 | buffer_descriptor.consumer_usage = usage; |
| 111 | buffer_descriptor.producer_usage = usage; |
| 112 | buffer_descriptor.width = w; |
| 113 | buffer_descriptor.height = h; |
| 114 | buffer_descriptor.format_type = MALI_GRALLOC_FORMAT_TYPE_USAGE; |
| 115 | gralloc_buffer_descriptor[0] = (gralloc_buffer_descriptor_t)(&buffer_descriptor); |
| 116 | |
| 117 | if (mali_gralloc_buffer_allocate(m, gralloc_buffer_descriptor, 1, pHandle, NULL) < 0) |
| 118 | { |
| 119 | ALOGE("Failed to allocate buffer."); |
| 120 | err = -ENOMEM; |
| 121 | } |
| 122 | else |
| 123 | { |
| 124 | mali_gralloc_query_getstride(*pHandle, pStride); |
| 125 | err = 0; |
| 126 | } |
| 127 | } |
| 128 | |
| 129 | return err; |
| 130 | } |
| 131 | |
| 132 | static int alloc_device_free(alloc_device_t *dev, buffer_handle_t handle) |
| 133 | { |
| 134 | if (private_handle_t::validate(handle) < 0) |
| 135 | { |
| 136 | return -EINVAL; |
| 137 | } |
| 138 | |
| 139 | private_handle_t const *hnd = reinterpret_cast<private_handle_t const *>(handle); |
| 140 | private_module_t *m = reinterpret_cast<private_module_t *>(dev->common.module); |
| 141 | |
| 142 | if (hnd->flags & private_handle_t::PRIV_FLAGS_FRAMEBUFFER) |
| 143 | { |
| 144 | // free this buffer |
| 145 | close(hnd->fd); |
| 146 | } |
| 147 | else |
| 148 | { |
| 149 | mali_gralloc_buffer_free(handle); |
| 150 | } |
| 151 | |
| 152 | delete hnd; |
| 153 | |
| 154 | return 0; |
| 155 | } |
| 156 | |
| 157 | int alloc_device_open(hw_module_t const *module, const char *name, hw_device_t **device) |
| 158 | { |
| 159 | alloc_device_t *dev; |
| 160 | |
| 161 | GRALLOC_UNUSED(name); |
| 162 | |
| 163 | dev = new alloc_device_t; |
| 164 | |
| 165 | if (NULL == dev) |
| 166 | { |
| 167 | return -1; |
| 168 | } |
| 169 | |
| 170 | /* initialize our state here */ |
| 171 | memset(dev, 0, sizeof(*dev)); |
| 172 | |
| 173 | /* initialize the procs */ |
| 174 | dev->common.tag = HARDWARE_DEVICE_TAG; |
| 175 | dev->common.version = 0; |
| 176 | dev->common.module = const_cast<hw_module_t *>(module); |
| 177 | dev->common.close = mali_gralloc_ion_device_close; |
| 178 | dev->alloc = alloc_device_alloc; |
| 179 | dev->free = alloc_device_free; |
| 180 | |
| 181 | *device = &dev->common; |
| 182 | |
| 183 | return 0; |
| 184 | } |