uefi/arm-trusted-firmware/bl2/bl2_main.c

/*
 * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * Redistributions of source code must retain the above copyright notice, this
 * list of conditions and the following disclaimer.
 *
 * Redistributions in binary form must reproduce the above copyright notice,
 * this list of conditions and the following disclaimer in the documentation
 * and/or other materials provided with the distribution.
 *
 * Neither the name of ARM nor the names of its contributors may be used
 * to endorse or promote products derived from this software without specific
 * prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

#include <arch.h>
#include <arch_helpers.h>
#include <assert.h>
#include <auth.h>
#include <bl_common.h>
#include <debug.h>
#include <platform.h>
#include <platform_def.h>
#include "bl2_private.h"

#if TRUSTED_BOARD_BOOT

#ifdef BL32_BASE
static int bl32_cert_error;
#endif

/*
 * Load and authenticate the key and content certificates for a BL3-x image
 *
 * Parameters:
 *   key_cert_blob: key certificate blob id (see auth.h)
 *   key_cert_name: key certificate filename
 *   cont_cert_blob: content certificate blob id (see auth.h)
 *   cont_cert_name: content certificate filename
 *   mem_layout: Trusted SRAM memory layout
 *   load_addr: load the certificates at this address
 *
 * Return: 0 = success, Otherwise = error
 */
static int load_cert_bl3x(int key_cert_blob, const char *key_cert_name,
			  int cont_cert_blob, const char *cont_cert_name,
			  meminfo_t *mem_layout, uint64_t load_addr)
{
	image_info_t image_info;
	int err;

	/* Load Key certificate */
	image_info.h.version = VERSION_1;
	err = load_image(mem_layout, key_cert_name, load_addr, &image_info, NULL);
	if (err) {
		ERROR("Cannot load %s.\n", key_cert_name);
		return err;
	}

	err = auth_verify_obj(key_cert_blob, image_info.image_base,
			image_info.image_size);
	if (err) {
		ERROR("Invalid key certificate %s.\n", key_cert_name);
		return err;
	}

	/* Load Content certificate */
	image_info.h.version = VERSION_1;
	err = load_image(mem_layout, cont_cert_name, load_addr, &image_info, NULL);
	if (err) {
		ERROR("Cannot load %s.\n", cont_cert_name);
		return err;
	}

	err = auth_verify_obj(cont_cert_blob, image_info.image_base,
			image_info.image_size);
	if (err) {
		ERROR("Invalid content certificate %s.\n", cont_cert_name);
		return err;
	}

	return 0;
}

/*
 * Load and authenticate the Trusted Key certificate the key and content
 * certificates for each of the BL3-x images.
 *
 * Return: 0 = success, Otherwise = error
 */
static int load_certs(void)
{
	const uint64_t load_addr = BL31_BASE;
	image_info_t image_info;
	meminfo_t *mem_layout;
	int err;

	/* Find out how much free trusted ram remains after BL2 load */
	mem_layout = bl2_plat_sec_mem_layout();

	/* Load the Trusted Key certificate in the BL31 region */
	image_info.h.version = VERSION_1;
	err = load_image(mem_layout, TRUSTED_KEY_CERT_NAME, load_addr,
			 &image_info, NULL);
	if (err) {
		ERROR("Failed to load Trusted Key certificate.\n");
		return err;
	}

	/* Validate the certificate */
	err = auth_verify_obj(AUTH_TRUSTED_KEY_CERT, image_info.image_base,
			image_info.image_size);
	if (err) {
		ERROR("Invalid Trusted Key certificate.\n");
		return err;
	}

	/* Load and validate Key and Content certificates for BL3-x images */
#ifdef BL30_BASE
	err = load_cert_bl3x(AUTH_BL30_KEY_CERT, BL30_KEY_CERT_NAME,
			     AUTH_BL30_IMG_CERT, BL30_CERT_NAME,
			     mem_layout, load_addr);
	if (err) {
		ERROR("Failed to verify BL3-0 authenticity\n");
		return err;
	}
#endif /* BL30_BASE */

	err = load_cert_bl3x(AUTH_BL31_KEY_CERT, BL31_KEY_CERT_NAME,
			     AUTH_BL31_IMG_CERT, BL31_CERT_NAME,
			     mem_layout, load_addr);
	if (err) {
		ERROR("Failed to verify BL3-1 authenticity\n");
		return err;
	}

#ifdef BL32_BASE
	/* BL3-2 image is optional, but keep the return value in case the
	 * image is present but the certificate is missing */
	err = load_cert_bl3x(AUTH_BL32_KEY_CERT, BL32_KEY_CERT_NAME,
			     AUTH_BL32_IMG_CERT, BL32_CERT_NAME,
			     mem_layout, load_addr);
	if (err) {
		WARN("Failed to verify BL3-2 authenticity\n");
	}
	bl32_cert_error = err;
#endif /* BL32_BASE */

	err = load_cert_bl3x(AUTH_BL33_KEY_CERT, BL33_KEY_CERT_NAME,
			     AUTH_BL33_IMG_CERT, BL33_CERT_NAME,
			     mem_layout, load_addr);
	if (err) {
		ERROR("Failed to verify BL3-3 authenticity\n");
		return err;
	}

	return 0;
}

#endif /* TRUSTED_BOARD_BOOT */

/*******************************************************************************
 * Load the BL3-0 image if there's one.
 * If a platform does not want to attempt to load BL3-0 image it must leave
 * BL30_BASE undefined.
 * Return 0 on success or if there's no BL3-0 image to load, a negative error
 * code otherwise.
 ******************************************************************************/
static int load_bl30(void)
{
	int e = 0;
#ifdef BL30_BASE
	meminfo_t bl30_mem_info;
	image_info_t bl30_image_info;

	/*
	 * It is up to the platform to specify where BL3-0 should be loaded if
	 * it exists. It could create space in the secure sram or point to a
	 * completely different memory.
	 *
	 * The entry point information is not relevant in this case as the AP
	 * won't execute the BL3-0 image.
	 */
	INFO("BL2: Loading BL3-0\n");
	bl2_plat_get_bl30_meminfo(&bl30_mem_info);
	bl30_image_info.h.version = VERSION_1;
	e = load_image(&bl30_mem_info,
		       BL30_IMAGE_NAME,
		       BL30_BASE,
		       &bl30_image_info,
		       NULL);

	if (e == 0) {
#if TRUSTED_BOARD_BOOT
		e = auth_verify_obj(AUTH_BL30_IMG,
				bl30_image_info.image_base,
				bl30_image_info.image_size);
		if (e) {
			ERROR("Failed to authenticate BL3-0 image.\n");
			panic();
		}

		/* After working with data, invalidate the data cache */
		inv_dcache_range(bl30_image_info.image_base,
				 (size_t)bl30_image_info.image_size);
#endif /* TRUSTED_BOARD_BOOT */

		/* The subsequent handling of BL3-0 is platform specific */
		bl2_plat_handle_bl30(&bl30_image_info);
	}
#endif /* BL30_BASE */

	return e;
}

/*******************************************************************************
 * Load the BL3-1 image.
 * The bl2_to_bl31_params and bl31_ep_info params will be updated with the
 * relevant BL3-1 information.
 * Return 0 on success, a negative error code otherwise.
 ******************************************************************************/
static int load_bl31(bl31_params_t *bl2_to_bl31_params,
		     entry_point_info_t *bl31_ep_info)
{
	meminfo_t *bl2_tzram_layout;
	int e;

	INFO("BL2: Loading BL3-1\n");
	assert(bl2_to_bl31_params != NULL);
	assert(bl31_ep_info != NULL);

	/* Find out how much free trusted ram remains after BL2 load */
	bl2_tzram_layout = bl2_plat_sec_mem_layout();

	/* Set the X0 parameter to BL3-1 */
	bl31_ep_info->args.arg0 = (unsigned long)bl2_to_bl31_params;

	/* Load the BL3-1 image */
	e = load_image(bl2_tzram_layout,
		       BL31_IMAGE_NAME,
		       BL31_BASE,
		       bl2_to_bl31_params->bl31_image_info,
		       bl31_ep_info);

	if (e == 0) {
#if TRUSTED_BOARD_BOOT
		e = auth_verify_obj(AUTH_BL31_IMG,
			bl2_to_bl31_params->bl31_image_info->image_base,
			bl2_to_bl31_params->bl31_image_info->image_size);
		if (e) {
			ERROR("Failed to authenticate BL3-1 image.\n");
			panic();
		}

		/* After working with data, invalidate the data cache */
		inv_dcache_range(bl2_to_bl31_params->bl31_image_info->image_base,
			(size_t)bl2_to_bl31_params->bl31_image_info->image_size);
#endif /* TRUSTED_BOARD_BOOT */

		bl2_plat_set_bl31_ep_info(bl2_to_bl31_params->bl31_image_info,
					  bl31_ep_info);
	}

	return e;
}

/*******************************************************************************
 * Load the BL3-2 image if there's one.
 * The bl2_to_bl31_params param will be updated with the relevant BL3-2
 * information.
 * If a platform does not want to attempt to load BL3-2 image it must leave
 * BL32_BASE undefined.
 * Return 0 on success or if there's no BL3-2 image to load, a negative error
 * code otherwise.
 ******************************************************************************/
static int load_bl32(bl31_params_t *bl2_to_bl31_params)
{
	int e = 0;
#ifdef BL32_BASE
	meminfo_t bl32_mem_info;

	INFO("BL2: Loading BL3-2\n");
	assert(bl2_to_bl31_params != NULL);

	/*
	 * It is up to the platform to specify where BL3-2 should be loaded if
	 * it exists. It could create space in the secure sram or point to a
	 * completely different memory.
	 */
	bl2_plat_get_bl32_meminfo(&bl32_mem_info);
	e = load_image(&bl32_mem_info,
		       BL32_IMAGE_NAME,
		       BL32_BASE,
		       bl2_to_bl31_params->bl32_image_info,
		       bl2_to_bl31_params->bl32_ep_info);

	if (e == 0) {
#if TRUSTED_BOARD_BOOT
		/* Image is present. Check if there is a valid certificate */
		if (bl32_cert_error) {
			ERROR("Failed to authenticate BL3-2 certificates.\n");
			panic();
		}

		e = auth_verify_obj(AUTH_BL32_IMG,
			bl2_to_bl31_params->bl32_image_info->image_base,
			bl2_to_bl31_params->bl32_image_info->image_size);
		if (e) {
			ERROR("Failed to authenticate BL3-2 image.\n");
			panic();
		}
		/* After working with data, invalidate the data cache */
		inv_dcache_range(bl2_to_bl31_params->bl32_image_info->image_base,
			(size_t)bl2_to_bl31_params->bl32_image_info->image_size);
#endif /* TRUSTED_BOARD_BOOT */

		bl2_plat_set_bl32_ep_info(
			bl2_to_bl31_params->bl32_image_info,
			bl2_to_bl31_params->bl32_ep_info);
	}
#endif /* BL32_BASE */

	return e;
}

/*******************************************************************************
 * Load the BL3-3 image.
 * The bl2_to_bl31_params param will be updated with the relevant BL3-3
 * information.
 * Return 0 on success, a negative error code otherwise.
 ******************************************************************************/
static int load_bl33(bl31_params_t *bl2_to_bl31_params)
{
	meminfo_t bl33_mem_info;
	int e;

	INFO("BL2: Loading BL3-3\n");
	assert(bl2_to_bl31_params != NULL);

	bl2_plat_get_bl33_meminfo(&bl33_mem_info);

	/* Load the BL3-3 image in non-secure memory provided by the platform */
	e = load_image(&bl33_mem_info,
		       BL33_IMAGE_NAME,
		       plat_get_ns_image_entrypoint(),
		       bl2_to_bl31_params->bl33_image_info,
		       bl2_to_bl31_params->bl33_ep_info);

	if (e == 0) {
#if TRUSTED_BOARD_BOOT
		e = auth_verify_obj(AUTH_BL33_IMG,
				bl2_to_bl31_params->bl33_image_info->image_base,
				bl2_to_bl31_params->bl33_image_info->image_size);
		if (e) {
			ERROR("Failed to authenticate BL3-3 image.\n");
			panic();
		}
		/* After working with data, invalidate the data cache */
		inv_dcache_range(bl2_to_bl31_params->bl33_image_info->image_base,
			(size_t)bl2_to_bl31_params->bl33_image_info->image_size);
#endif /* TRUSTED_BOARD_BOOT */

		bl2_plat_set_bl33_ep_info(bl2_to_bl31_params->bl33_image_info,
					  bl2_to_bl31_params->bl33_ep_info);
	}

	return e;
}

/*******************************************************************************
 * The only thing to do in BL2 is to load further images and pass control to
 * BL3-1. The memory occupied by BL2 will be reclaimed by BL3-x stages. BL2 runs
 * entirely in S-EL1.
 ******************************************************************************/
void bl2_main(void)
{
	bl31_params_t *bl2_to_bl31_params;
	entry_point_info_t *bl31_ep_info;
	int e;

	NOTICE("BL2: %s\n", version_string);
	NOTICE("BL2: %s\n", build_message);

	/* Perform remaining generic architectural setup in S-EL1 */
	bl2_arch_setup();

#if TRUSTED_BOARD_BOOT
	/* Initialize authentication module */
	auth_init();

	/* Validate the certificates involved in the Chain of Trust */
	e = load_certs();
	if (e) {
		ERROR("Chain of Trust invalid. Aborting...\n");
		panic();
	}
#endif /* TRUSTED_BOARD_BOOT */

	/*
	 * Load the subsequent bootloader images
	 */
	e = load_bl30();
	if (e) {
		ERROR("Failed to load BL3-0 (%i)\n", e);
		ERROR("Please burn mcu image:\n");
		ERROR("  sudo fastboot flash mcuimage mcuimage.bin\n");
	}

	/* Perform platform setup in BL2 after loading BL3-0 */
	bl2_platform_setup();

	/*
	 * Get a pointer to the memory the platform has set aside to pass
	 * information to BL3-1.
	 */
	bl2_to_bl31_params = bl2_plat_get_bl31_params();
	bl31_ep_info = bl2_plat_get_bl31_ep_info();

	e = load_bl31(bl2_to_bl31_params, bl31_ep_info);
	if (e) {
		ERROR("Failed to load BL3-1 (%i)\n", e);
		panic();
	}

	e = load_bl32(bl2_to_bl31_params);
	if (e)
		WARN("Failed to load BL3-2 (%i)\n", e);

	e = load_bl33(bl2_to_bl31_params);
	if (e) {
		ERROR("Failed to load BL3-3 (%i)\n", e);
		panic();
	}

	/* Flush the params to be passed to memory */
	bl2_plat_flush_bl31_params();

	/*
	 * Run BL3-1 via an SMC to BL1. Information on how to pass control to
	 * the BL3-2 (if present) and BL3-3 software images will be passed to
	 * BL3-1 as an argument.
	 */
	smc(RUN_IMAGE, (unsigned long)bl31_ep_info, 0, 0, 0, 0, 0, 0);
}