Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / device / linaro / hikey960 / 82c807137a2c3f033e23e414476d131e88ad221a / . / uefi / linaro-edk2 / ArmPlatformPkg / ArmVirtualizationPkg / ArmVirtualizationQemu.fdf
blob: c90a78468ed3a81cdf467d82d256d739bea9139d [file] [log] [blame]
Vishal Bhoj82c80712015-12-15 21:13:33 +0530[diff] [blame^]1#
2# Copyright (c) 2011, 2013, ARM Limited. All rights reserved.
3# Copyright (c) 2014, Linaro Limited. All rights reserved.
4#
5# This program and the accompanying materials
6# are licensed and made available under the terms and conditions of the BSD License
7# which accompanies this distribution. The full text of the license may be found at
8# http://opensource.org/licenses/bsd-license.php
9#
10# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
11# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
12#
13
14################################################################################
15#
16# FD Section
17# The [FD] Section is made up of the definition statements and a
18# description of what goes into the Flash Device Image. Each FD section
19# defines one flash "device" image. A flash device image may be one of
20# the following: Removable media bootable image (like a boot floppy
21# image,) an Option ROM image (that would be "flashed" into an add-in
22# card,) a System "Flash" image (that would be burned into a system's
23# flash) or an Update ("Capsule") image that will be used to update and
24# existing system flash.
25#
26################################################################################
27
28[FD.QEMU_EFI]
29BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress # QEMU assigns 0 - 0x8000000 for a BootROM
30Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
31ErasePolarity = 1
32
33# This one is tricky, it must be: BlockSize * NumBlocks = Size
34BlockSize = 0x00001000
35NumBlocks = 0x200
36
37################################################################################
38#
39# Following are lists of FD Region layout which correspond to the locations of different
40# images within the flash device.
41#
42# Regions must be defined in ascending order and may not overlap.
43#
44# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
45# the pipe "|" character, followed by the size of the region, also in hex with the leading
46# "0x" characters. Like:
47# Offset|Size
48# PcdOffsetCName|PcdSizeCName
49# RegionType <FV, DATA, or FILE>
50#
51################################################################################
52
53#
54# UEFI has trouble dealing with FVs that reside at physical address 0x0.
55# So instead, put a hardcoded 'jump to 0x1000' at offset 0x0, and put the
56# real FV at offset 0x1000
57#
580x00000000|0x00001000
59DATA = {
60!if $(ARCH) == AARCH64
61 0x00, 0x04, 0x00, 0x14 # 'b 0x1000' in AArch64 ASM
62!else
63 0xfe, 0x03, 0x00, 0xea # 'b 0x1000' in AArch32 ASM
64!endif
65}
66
670x00001000|0x001ff000
68gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
69FV = FVMAIN_COMPACT
70
71
72################################################################################
73#
74# FV Section
75#
76# [FV] section is used to define what components or modules are placed within a flash
77# device file. This section also defines order the components and modules are positioned
78# within the image. The [FV] section consists of define statements, set statements and
79# module statements.
80#
81################################################################################
82
83[FV.FvMain]
84BlockSize = 0x40
85NumBlocks = 0 # This FV gets compressed so make it just big enough
86FvAlignment = 16 # FV alignment and FV attributes setting.
87ERASE_POLARITY = 1
88MEMORY_MAPPED = TRUE
89STICKY_WRITE = TRUE
90LOCK_CAP = TRUE
91LOCK_STATUS = TRUE
92WRITE_DISABLED_CAP = TRUE
93WRITE_ENABLED_CAP = TRUE
94WRITE_STATUS = TRUE
95WRITE_LOCK_CAP = TRUE
96WRITE_LOCK_STATUS = TRUE
97READ_DISABLED_CAP = TRUE
98READ_ENABLED_CAP = TRUE
99READ_STATUS = TRUE
100READ_LOCK_CAP = TRUE
101READ_LOCK_STATUS = TRUE
102
103 APRIORI DXE {
104 INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
105 INF ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.inf
106 }
107 INF MdeModulePkg/Core/Dxe/DxeMain.inf
108 INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
109 INF ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.inf
110
111 #
112 # PI DXE Drivers producing Architectural Protocols (EFI Services)
113 #
114 INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
115 INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
116 INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
117 INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
118 INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
119 INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
120 INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
121 INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
122 INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
123 INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
124 INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
125
126 #
127 # Multiple Console IO support
128 #
129 INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
130 INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
131 INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
132 INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
133 INF EmbeddedPkg/SerialDxe/SerialDxe.inf
134
135 INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
136 INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
137 INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
138 INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
139
140 #
141 # FAT filesystem + GPT/MBR partitioning
142 #
143 INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
144 INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
145 INF FatBinPkg/EnhancedFatDxe/Fat.inf
146 INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
147
148 #
149 # Platform Driver
150 #
151 INF OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
152 INF OvmfPkg/VirtioNetDxe/VirtioNet.inf
153 INF OvmfPkg/VirtioScsiDxe/VirtioScsi.inf
154
155 #
156 # UEFI application (Shell Embedded Boot Loader)
157 #
158 INF ShellBinPkg/UefiShell/UefiShell.inf
159
160 #
161 # Bds
162 #
163 INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
164!ifdef INTEL_BDS
165 INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
166 INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
167 INF IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf
168!else
169 INF ArmPlatformPkg/Bds/Bds.inf
170!endif
171
172 #
173 # Networking stack
174 #
175 INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf
176 INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf
177 INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf
178 INF MdeModulePkg/Universal/Network/Ip4ConfigDxe/Ip4ConfigDxe.inf
179 INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf
180 INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf
181 INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf
182 INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf
183 INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf
184 INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf
185 INF MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf
186 INF MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf
187
188 #
189 # SCSI Bus and Disk Driver
190 #
191 INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
192 INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
193
194 #
195 # ACPI Support
196 #
197 INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
198 INF OvmfPkg/AcpiPlatformDxe/QemuFwCfgAcpiPlatformDxe.inf
199
200[FV.FVMAIN_COMPACT]
201FvAlignment = 16
202ERASE_POLARITY = 1
203MEMORY_MAPPED = TRUE
204STICKY_WRITE = TRUE
205LOCK_CAP = TRUE
206LOCK_STATUS = TRUE
207WRITE_DISABLED_CAP = TRUE
208WRITE_ENABLED_CAP = TRUE
209WRITE_STATUS = TRUE
210WRITE_LOCK_CAP = TRUE
211WRITE_LOCK_STATUS = TRUE
212READ_DISABLED_CAP = TRUE
213READ_ENABLED_CAP = TRUE
214READ_STATUS = TRUE
215READ_LOCK_CAP = TRUE
216READ_LOCK_STATUS = TRUE
217
218 APRIORI PEI {
219 INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
220 }
221 INF ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf
222 INF MdeModulePkg/Core/Pei/PeiMain.inf
223 INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
224 INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
225 INF ArmPkg/Drivers/CpuPei/CpuPei.inf
226 INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
227 INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
228 INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
229
230 FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
231 SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
232 SECTION FV_IMAGE = FVMAIN
233 }
234 }
235
236
237################################################################################
238#
239# Rules are use with the [FV] section's module INF type to define
240# how an FFS file is created for a given INF file. The following Rule are the default
241# rules for the different module type. User can add the customized rules to define the
242# content of the FFS file.
243#
244################################################################################
245
246
247############################################################################
248# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
249############################################################################
250#
251#[Rule.Common.DXE_DRIVER]
252# FILE DRIVER = $(NAMED_GUID) {
253# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
254# COMPRESS PI_STD {
255# GUIDED {
256# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
257# UI STRING="$(MODULE_NAME)" Optional
258# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
259# }
260# }
261# }
262#
263############################################################################
264
265[Rule.Common.SEC]
266 FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
267 TE TE Align = 128 $(INF_OUTPUT)/$(MODULE_NAME).efi
268 }
269
270[Rule.Common.PEI_CORE]
271 FILE PEI_CORE = $(NAMED_GUID) {
272 TE TE Align = 8 $(INF_OUTPUT)/$(MODULE_NAME).efi
273 UI STRING ="$(MODULE_NAME)" Optional
274 }
275
276[Rule.Common.PEIM]
277 FILE PEIM = $(NAMED_GUID) {
278 PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
279 TE TE Align = 8 $(INF_OUTPUT)/$(MODULE_NAME).efi
280 UI STRING="$(MODULE_NAME)" Optional
281 }
282
283[Rule.Common.PEIM.TIANOCOMPRESSED]
284 FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
285 PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
286 GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
287 PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
288 UI STRING="$(MODULE_NAME)" Optional
289 }
290 }
291
292[Rule.Common.DXE_CORE]
293 FILE DXE_CORE = $(NAMED_GUID) {
294 PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
295 UI STRING="$(MODULE_NAME)" Optional
296 }
297
298[Rule.Common.UEFI_DRIVER]
299 FILE DRIVER = $(NAMED_GUID) {
300 DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
301 PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
302 UI STRING="$(MODULE_NAME)" Optional
303 }
304
305[Rule.Common.DXE_DRIVER]
306 FILE DRIVER = $(NAMED_GUID) {
307 DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
308 PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
309 UI STRING="$(MODULE_NAME)" Optional
310 }
311
312[Rule.Common.DXE_RUNTIME_DRIVER]
313 FILE DRIVER = $(NAMED_GUID) {
314 DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
315 PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
316 UI STRING="$(MODULE_NAME)" Optional
317 }
318
319[Rule.Common.UEFI_APPLICATION]
320 FILE APPLICATION = $(NAMED_GUID) {
321 UI STRING ="$(MODULE_NAME)" Optional
322 PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
323 }
324
325[Rule.Common.UEFI_DRIVER.BINARY]
326 FILE DRIVER = $(NAMED_GUID) {
327 DXE_DEPEX DXE_DEPEX Optional |.depex
328 PE32 PE32 |.efi
329 UI STRING="$(MODULE_NAME)" Optional
330 VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
331 }
332
333[Rule.Common.UEFI_APPLICATION.BINARY]
334 FILE APPLICATION = $(NAMED_GUID) {
335 PE32 PE32 |.efi
336 UI STRING="$(MODULE_NAME)" Optional
337 VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
338 }
339
340[Rule.Common.USER_DEFINED.ACPITABLE]
341 FILE FREEFORM = $(NAMED_GUID) {
342 RAW ACPI |.acpi
343 RAW ASL |.aml
344 UI STRING="$(MODULE_NAME)" Optional
345 }