device-common.mk

#
# Copyright (C) 2011 The Android Open-Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

# Adjust the dalvik heap to be appropriate for a tablet.
$(call inherit-product-if-exists, frameworks/native/build/tablet-10in-xhdpi-2048-dalvik-heap.mk)

# Set vendor kernel path
PRODUCT_VENDOR_KERNEL_HEADERS := device/linaro/hikey/kernel-headers

# Set custom settings
DEVICE_PACKAGE_OVERLAYS := device/linaro/hikey/overlay

# Add openssh support for remote debugging and job submission
PRODUCT_PACKAGES += ssh sftp scp sshd ssh-keygen sshd_config start-ssh

# Add wifi-related packages
PRODUCT_PACKAGES += libwpa_client wpa_supplicant hostapd wificond wifilogd
PRODUCT_PROPERTY_OVERRIDES += wifi.interface=wlan0 \
                              wifi.supplicant_scan_interval=15

# Build and run only ART
PRODUCT_RUNTIMES := runtime_libart_default

# Build default bluetooth a2dp and usb audio HALs
PRODUCT_PACKAGES += audio.a2dp.default \
		    audio.usb.default \
		    audio.r_submix.default \
		    tinyplay

PRODUCT_PACKAGES += \
    android.hardware.audio@2.0-impl \
    android.hardware.audio.effect@2.0-impl \
    android.hardware.broadcastradio@1.0-impl \
    android.hardware.soundtrigger@2.0-impl

PRODUCT_PACKAGES += \
    android.hardware.drm@1.0-impl \

# Set zygote config
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.zygote=zygote64_32
PRODUCT_COPY_FILES += system/core/rootdir/init.zygote64_32.rc:root/init.zygote64_32.rc

PRODUCT_PACKAGES += libGLES_android

# Graphics HAL
PRODUCT_PACKAGES += \
    android.hardware.graphics.allocator@2.0-impl \
    android.hardware.graphics.composer@2.1-impl \
    android.hardware.graphics.mapper@2.0-impl

# Memtrack
PRODUCT_PACKAGES += memtrack.default \
    android.hardware.memtrack@1.0-service \
    android.hardware.memtrack@1.0-impl

PRODUCT_PACKAGES +=	TIInit_11.8.32.bts \
			wl18xx-fw-4.bin \
			wl18xx-conf.bin


ifeq ($(HIKEY_USE_LEGACY_TI_BLUETOOTH), true)
PRODUCT_PACKAGES += android.hardware.bluetooth@1.0-service.hikey uim
else
PRODUCT_PACKAGES += android.hardware.bluetooth@1.0-service.btlinux
endif

# PowerHAL
PRODUCT_PACKAGES += android.hardware.power@1.0-impl

#GNSS HAL
PRODUCT_PACKAGES += \
    android.hardware.gnss@1.0-impl

# Keymaster HAL
PRODUCT_PACKAGES += \
    android.hardware.keymaster@3.0-impl

# Sensor HAL
ifneq ($(TARGET_SENSOR_MEZZANINE),)
TARGET_USES_NANOHUB_SENSORHAL := true
NANOHUB_SENSORHAL_LID_STATE_ENABLED := true
NANOHUB_SENSORHAL_SENSORLIST := $(LOCAL_PATH)/sensorhal/sensorlist_$(TARGET_SENSOR_MEZZANINE).cpp
NANOHUB_SENSORHAL_DIRECT_REPORT_ENABLED := true
NANOHUB_SENSORHAL_DYNAMIC_SENSOR_EXT_ENABLED := true

PRODUCT_PACKAGES += \
    context_hub.default \
    android.hardware.sensors@1.0-service \
    android.hardware.sensors@1.0-impl \
    android.hardware.contexthub@1.0-service \
    android.hardware.contexthub@1.0-impl \
    sensors.$(TARGET_PRODUCT)

# Nanohub tools
PRODUCT_PACKAGES += stm32_flash nanoapp_cmd nanotool

PRODUCT_COPY_FILES += \
    device/linaro/hikey/init.common.nanohub.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.nanohub.rc

# Copy sensors config file(s)
PRODUCT_COPY_FILES += \
    frameworks/native/data/etc/android.hardware.sensor.accelerometer.xml:system/etc/permissions/android.hardware.sensor.accelerometer.xml \
    frameworks/native/data/etc/android.hardware.sensor.ambient_temperature.xml:system/etc/permissions/android.hardware.sensor.ambient_temperature.xml \
    frameworks/native/data/etc/android.hardware.sensor.barometer.xml:system/etc/permissions/android.hardware.sensor.barometer.xml \
    frameworks/native/data/etc/android.hardware.sensor.compass.xml:system/etc/permissions/android.hardware.sensor.compass.xml \
    frameworks/native/data/etc/android.hardware.sensor.gyroscope.xml:system/etc/permissions/android.hardware.sensor.gyroscope.xml \
    frameworks/native/data/etc/android.hardware.sensor.hifi_sensors.xml:system/etc/permissions/android.hardware.sensor.hifi_sensors.xml \
    frameworks/native/data/etc/android.hardware.sensor.light.xml:system/etc/permissions/android.hardware.sensor.light.xml \
    frameworks/native/data/etc/android.hardware.sensor.relative_humidity.xml:system/etc/permissions/android.hardware.sensor.relative_humidity.xml \
    frameworks/native/data/etc/android.hardware.sensor.stepcounter.xml:system/etc/permissions/android.hardware.sensor.stepcounter.xml \
    frameworks/native/data/etc/android.hardware.sensor.stepdetector.xml:system/etc/permissions/android.hardware.sensor.stepdetector.xml

# Argonkey VL53L0X proximity driver is not available yet. So we are going to copy conf file for neonkey only
ifeq ($(TARGET_SENSOR_MEZZANINE),neonkey)
PRODUCT_COPY_FILES += \
    frameworks/native/data/etc/android.hardware.sensor.proximity.xml:system/etc/permissions/android.hardware.sensor.proximity.xml
endif

# VR HAL
PRODUCT_COPY_FILES += \
    frameworks/native/services/vr/virtual_touchpad/idc/vr-virtual-touchpad-1.idc:$(TARGET_COPY_OUT_VENDOR)/usr/idc/vr-virtual-touchpad-1.idc \
    frameworks/native/data/etc/android.hardware.vr.high_performance.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vr.high_performance.xml \
    frameworks/native/data/etc/android.hardware.vr.headtracking-0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vr.headtracking.xml

PRODUCT_PACKAGES += \
    vr.default \
    android.hardware.vr@1.0-service \
    android.hardware.vr@1.0-impl

endif

# Use Launcher3
PRODUCT_PACKAGES += Launcher3

# Copy hardware config file(s)
PRODUCT_COPY_FILES +=  \
        device/linaro/hikey/etc/permissions/android.hardware.screen.xml:system/etc/permissions/android.hardware.screen.xml \
        frameworks/native/data/etc/android.software.cts.xml:system/etc/permissions/android.software.cts.xml \
        frameworks/native/data/etc/android.software.app_widgets.xml:system/etc/permissions/android.software.app_widgets.xml \
        frameworks/native/data/etc/android.software.backup.xml:system/etc/permissions/android.software.backup.xml \
        frameworks/native/data/etc/android.software.voice_recognizers.xml:system/etc/permissions/android.software.voice_recognizers.xml \
        frameworks/native/data/etc/android.hardware.ethernet.xml:system/etc/permissions/android.hardware.ethernet.xml \
        frameworks/native/data/etc/android.hardware.usb.accessory.xml:system/etc/permissions/android.hardware.usb.accessory.xml \
        frameworks/native/data/etc/android.hardware.usb.host.xml:system/etc/permissions/android.hardware.usb.host.xml \
        frameworks/native/data/etc/android.software.device_admin.xml:system/etc/permissions/android.software.device_admin.xml

# Include BT modules
$(call inherit-product-if-exists, device/linaro/hikey/wpan/ti-wpan-products.mk)

PRODUCT_COPY_FILES += \
        frameworks/native/data/etc/android.hardware.wifi.xml:system/etc/permissions/android.hardware.wifi.xml \
        frameworks/native/data/etc/android.hardware.bluetooth.xml:system/etc/permissions/android.hardware.bluetooth.xml \
        frameworks/native/data/etc/android.hardware.bluetooth_le.xml:system/etc/permissions/android.hardware.bluetooth_le.xml \
        device/linaro/hikey/wpa_supplicant.conf:system/etc/wifi/wpa_supplicant.conf

# audio policy configuration
USE_XML_AUDIO_POLICY_CONF := 1
PRODUCT_COPY_FILES += \
    device/linaro/hikey/audio/audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_configuration.xml \
    frameworks/av/services/audiopolicy/config/a2dp_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/a2dp_audio_policy_configuration.xml \
    frameworks/av/services/audiopolicy/config/r_submix_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/r_submix_audio_policy_configuration.xml \
    frameworks/av/services/audiopolicy/config/usb_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/usb_audio_policy_configuration.xml \
    frameworks/av/services/audiopolicy/config/default_volume_tables.xml:$(TARGET_COPY_OUT_VENDOR)/etc/default_volume_tables.xml \
    frameworks/av/services/audiopolicy/config/audio_policy_volumes.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_volumes.xml

# Copy media codecs config file
PRODUCT_COPY_FILES += \
        device/linaro/hikey/etc/media_codecs.xml:system/etc/media_codecs.xml \
        frameworks/av/media/libstagefright/data/media_codecs_google_audio.xml:system/etc/media_codecs_google_audio.xml