| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * (C) Copyright 2018 Xilinx, Inc. |
| * Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> |
| */ |
| |
| #include <common.h> |
| #include <env.h> |
| #include <malloc.h> |
| #include <zynqmp_firmware.h> |
| #include <asm/arch/hardware.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/io.h> |
| |
| static int do_zynqmp_verify_secure(cmd_tbl_t *cmdtp, int flag, int argc, |
| char * const argv[]) |
| { |
| u64 src_addr, addr; |
| u32 len, src_lo, src_hi; |
| u8 *key_ptr = NULL; |
| int ret; |
| u32 key_lo = 0; |
| u32 key_hi = 0; |
| u32 ret_payload[PAYLOAD_ARG_CNT]; |
| |
| if (argc < 4) |
| return CMD_RET_USAGE; |
| |
| src_addr = simple_strtoull(argv[2], NULL, 16); |
| len = simple_strtoul(argv[3], NULL, 16); |
| |
| if (argc == 5) |
| key_ptr = (uint8_t *)(uintptr_t)simple_strtoull(argv[4], |
| NULL, 16); |
| |
| if ((ulong)src_addr != ALIGN((ulong)src_addr, |
| CONFIG_SYS_CACHELINE_SIZE)) { |
| printf("Failed: source address not aligned:%lx\n", |
| (ulong)src_addr); |
| return -EINVAL; |
| } |
| |
| src_lo = lower_32_bits((ulong)src_addr); |
| src_hi = upper_32_bits((ulong)src_addr); |
| flush_dcache_range((ulong)src_addr, (ulong)(src_addr + len)); |
| |
| if (key_ptr) { |
| key_lo = lower_32_bits((ulong)key_ptr); |
| key_hi = upper_32_bits((ulong)key_ptr); |
| flush_dcache_range((ulong)key_ptr, |
| (ulong)(key_ptr + KEY_PTR_LEN)); |
| } |
| |
| ret = invoke_smc(ZYNQMP_SIP_SVC_PM_SECURE_IMG_LOAD, src_lo, src_hi, |
| key_lo, key_hi, ret_payload); |
| if (ret) { |
| printf("Failed: secure op status:0x%x\n", ret); |
| } else { |
| addr = (u64)ret_payload[1] << 32 | ret_payload[2]; |
| printf("Verified image at 0x%llx\n", addr); |
| env_set_hex("zynqmp_verified_img_addr", addr); |
| } |
| |
| return ret; |
| } |
| |
| static int do_zynqmp_mmio_read(cmd_tbl_t *cmdtp, int flag, int argc, |
| char * const argv[]) |
| { |
| u32 read_val, addr; |
| int ret; |
| |
| if (argc != cmdtp->maxargs) |
| return CMD_RET_USAGE; |
| |
| addr = simple_strtoul(argv[2], NULL, 16); |
| |
| ret = zynqmp_mmio_read(addr, &read_val); |
| if (!ret) |
| printf("mmio read value at 0x%x = 0x%x\n", |
| addr, read_val); |
| else |
| printf("Failed: mmio read\n"); |
| |
| return ret; |
| } |
| |
| static int do_zynqmp_mmio_write(cmd_tbl_t *cmdtp, int flag, int argc, |
| char * const argv[]) |
| { |
| u32 addr, mask, val; |
| int ret; |
| |
| if (argc != cmdtp->maxargs) |
| return CMD_RET_USAGE; |
| |
| addr = simple_strtoul(argv[2], NULL, 16); |
| mask = simple_strtoul(argv[3], NULL, 16); |
| val = simple_strtoul(argv[4], NULL, 16); |
| |
| ret = zynqmp_mmio_write(addr, mask, val); |
| if (ret != 0) |
| printf("Failed: mmio write\n"); |
| |
| return ret; |
| } |
| |
| #ifdef CONFIG_DEFINE_TCM_OCM_MMAP |
| static int do_zynqmp_tcm_init(cmd_tbl_t *cmdtp, int flag, int argc, |
| char * const argv[]) |
| { |
| u8 mode; |
| |
| if (argc != cmdtp->maxargs) |
| return CMD_RET_USAGE; |
| |
| mode = simple_strtoul(argv[2], NULL, 16); |
| if (mode != TCM_LOCK && mode != TCM_SPLIT) { |
| printf("Mode should be either 0(lock)/1(split)\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| dcache_disable(); |
| tcm_init(mode); |
| dcache_enable(); |
| |
| return CMD_RET_SUCCESS; |
| } |
| #endif |
| |
| static cmd_tbl_t cmd_zynqmp_sub[] = { |
| U_BOOT_CMD_MKENT(secure, 5, 0, do_zynqmp_verify_secure, "", ""), |
| U_BOOT_CMD_MKENT(mmio_read, 3, 0, do_zynqmp_mmio_read, "", ""), |
| U_BOOT_CMD_MKENT(mmio_write, 5, 0, do_zynqmp_mmio_write, "", ""), |
| #ifdef CONFIG_DEFINE_TCM_OCM_MMAP |
| U_BOOT_CMD_MKENT(tcminit, 3, 0, do_zynqmp_tcm_init, "", ""), |
| #endif |
| }; |
| |
| /** |
| * do_zynqmp - Handle the "zynqmp" command-line command |
| * @cmdtp: Command data struct pointer |
| * @flag: Command flag |
| * @argc: Command-line argument count |
| * @argv: Array of command-line arguments |
| * |
| * Processes the zynqmp specific commands |
| * |
| * Return: return 0 on success and CMD_RET_USAGE incase of misuse and error |
| */ |
| static int do_zynqmp(cmd_tbl_t *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| cmd_tbl_t *c; |
| |
| if (argc < 2) |
| return CMD_RET_USAGE; |
| |
| c = find_cmd_tbl(argv[1], &cmd_zynqmp_sub[0], |
| ARRAY_SIZE(cmd_zynqmp_sub)); |
| |
| if (c) |
| return c->cmd(c, flag, argc, argv); |
| else |
| return CMD_RET_USAGE; |
| } |
| |
| /***************************************************/ |
| #ifdef CONFIG_SYS_LONGHELP |
| static char zynqmp_help_text[] = |
| "secure src len [key_addr] - verifies secure images of $len bytes\n" |
| " long at address $src. Optional key_addr\n" |
| " can be specified if user key needs to\n" |
| " be used for decryption\n" |
| "zynqmp mmio_read address - read from address\n" |
| "zynqmp mmio_write address mask value - write value after masking to\n" |
| " address\n" |
| #ifdef CONFIG_DEFINE_TCM_OCM_MMAP |
| "zynqmp tcminit mode - Initialize the TCM with zeros. TCM needs to be\n" |
| " initialized before accessing to avoid ECC\n" |
| " errors. mode specifies in which mode TCM has\n" |
| " to be initialized. Supported modes will be\n" |
| " lock(0)/split(1)\n" |
| #endif |
| ; |
| #endif |
| |
| U_BOOT_CMD( |
| zynqmp, 5, 1, do_zynqmp, |
| "ZynqMP sub-system", |
| zynqmp_help_text |
| ) |