| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. |
| */ |
| |
| #include <elf.h> |
| #include <log.h> |
| #include <asm/sections.h> |
| #include <asm/global_data.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| int copy_uboot_to_ram(void) |
| { |
| size_t len = (size_t)__image_copy_end - (size_t)__image_copy_start; |
| |
| if (gd->flags & GD_FLG_SKIP_RELOC) |
| return 0; |
| |
| memcpy((void *)gd->relocaddr, (void *)__image_copy_start, len); |
| |
| return 0; |
| } |
| |
| int clear_bss(void) |
| { |
| ulong dst_addr = (ulong)__bss_start + gd->reloc_off; |
| size_t len = (size_t)__bss_end - (size_t)__bss_start; |
| |
| memset((void *)dst_addr, 0x00, len); |
| |
| return 0; |
| } |
| |
| /* |
| * Base functionality is taken from x86 version with added ARC-specifics |
| */ |
| int do_elf_reloc_fixups(void) |
| { |
| Elf32_Rela *re_src = (Elf32_Rela *)__rel_dyn_start; |
| Elf32_Rela *re_end = (Elf32_Rela *)__rel_dyn_end; |
| |
| if (gd->flags & GD_FLG_SKIP_RELOC) |
| return 0; |
| |
| debug("Section .rela.dyn is located at %08x-%08x\n", |
| (unsigned int)re_src, (unsigned int)re_end); |
| |
| Elf32_Addr *offset_ptr_rom; |
| Elf32_Addr *offset_ptr_ram; |
| |
| do { |
| /* Get the location from the relocation entry */ |
| offset_ptr_rom = (Elf32_Addr *)re_src->r_offset; |
| |
| /* Check that the location of the relocation is in .text */ |
| if (offset_ptr_rom >= (Elf32_Addr *)__image_copy_start && |
| offset_ptr_rom < (Elf32_Addr *)__image_copy_end) { |
| unsigned int val, do_swap = 0; |
| /* Switch to the in-RAM version */ |
| offset_ptr_ram = (Elf32_Addr *)((ulong)offset_ptr_rom + |
| gd->reloc_off); |
| |
| #ifdef __LITTLE_ENDIAN__ |
| /* If location in ".text" section swap value */ |
| if (((u32)offset_ptr_rom >= (u32)__text_start && |
| (u32)offset_ptr_rom <= (u32)__text_end) |
| #if defined(__ARC700__) || defined(__ARC600__) |
| || ((u32)offset_ptr_rom >= (u32)__ivt_start && |
| (u32)offset_ptr_rom <= (u32)__ivt_end) |
| #endif |
| ) |
| do_swap = 1; |
| #endif |
| |
| debug("Patching value @ %08x (relocated to %08x)%s\n", |
| (unsigned int)offset_ptr_rom, |
| (unsigned int)offset_ptr_ram, |
| do_swap ? ", middle-endian encoded" : ""); |
| |
| /* |
| * Use "memcpy" because target location might be |
| * 16-bit aligned on ARC so we may need to read |
| * byte-by-byte. On attempt to read entire word by |
| * CPU throws an exception |
| */ |
| memcpy(&val, offset_ptr_ram, sizeof(int)); |
| |
| if (do_swap) |
| val = (val << 16) | (val >> 16); |
| |
| /* Check that the target points into executable */ |
| if (val < (unsigned int)__image_copy_start || |
| val > (unsigned int)__image_copy_end) { |
| /* TODO: Use panic() instead of debug() |
| * |
| * For some reason GCC might generate |
| * fake relocation even for LD/SC of constant |
| * inderectly. See an example below: |
| * ----------------------->8-------------------- |
| * static int setup_mon_len(void) |
| * { |
| * gd->mon_len = (ulong)__bss_end - CONFIG_SYS_MONITOR_BASE; |
| * return 0; |
| * } |
| * ----------------------->8-------------------- |
| * |
| * And that's what we get in the binary: |
| * ----------------------->8-------------------- |
| * 10005cb4 <setup_mon_len>: |
| * 10005cb4: 193c 3f80 0003 2f80 st 0x32f80,[r25,60] |
| * 10005cb8: R_ARC_RELATIVE *ABS*-0x10000000 |
| * 10005cbc: 7fe0 j_s.d [blink] |
| * 10005cbe: 700c mov_s r0,0 |
| * ----------------------->8-------------------- |
| */ |
| debug("Relocation target %08x points outside of image\n", |
| val); |
| } |
| |
| val += gd->reloc_off; |
| |
| if (do_swap) |
| val = (val << 16) | (val >> 16); |
| |
| memcpy(offset_ptr_ram, &val, sizeof(int)); |
| } |
| } while (++re_src < re_end); |
| |
| return 0; |
| } |