| CONFIG_ARM=y |
| CONFIG_SKIP_LOWLEVEL_INIT=y |
| CONFIG_SYS_DCACHE_OFF=y |
| CONFIG_ARCH_CPU_INIT=y |
| CONFIG_ARCH_KIRKWOOD=y |
| CONFIG_SYS_KWD_CONFIG="board/Seagate/nas220/kwbimage.cfg" |
| CONFIG_TEXT_BASE=0x600000 |
| CONFIG_NR_DRAM_BANKS=2 |
| CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 |
| CONFIG_TARGET_NAS220=y |
| CONFIG_ENV_SIZE=0x10000 |
| CONFIG_ENV_OFFSET=0xA0000 |
| CONFIG_DEFAULT_DEVICE_TREE="kirkwood-blackarmor-nas220" |
| CONFIG_IDENT_STRING="\nNAS 220" |
| CONFIG_SYS_LOAD_ADDR=0x800000 |
| # CONFIG_SYS_MALLOC_F is not set |
| CONFIG_BOOTDELAY=3 |
| CONFIG_USE_BOOTCOMMAND=y |
| CONFIG_USE_PREBOOT=y |
| # CONFIG_DISPLAY_BOARDINFO is not set |
| CONFIG_RESET_PHY_R=y |
| CONFIG_HUSH_PARSER=y |
| CONFIG_SYS_PROMPT="nas220> " |
| CONFIG_SYS_MAXARGS=32 |
| CONFIG_SYS_PBSIZE=1049 |
| # CONFIG_CMD_FLASH is not set |
| CONFIG_CMD_IDE=y |
| CONFIG_CMD_NAND=y |
| CONFIG_CMD_USB=y |
| # CONFIG_CMD_SETEXPR is not set |
| CONFIG_CMD_DHCP=y |
| CONFIG_SYS_DISABLE_AUTOLOAD=y |
| CONFIG_CMD_MII=y |
| CONFIG_CMD_PING=y |
| CONFIG_CMD_EXT2=y |
| CONFIG_CMD_EXT4=y |
| CONFIG_CMD_FAT=y |
| CONFIG_CMD_JFFS2=y |
| CONFIG_CMD_MTDPARTS=y |
| CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" |
| CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0xa0000@0x0(uboot),0x010000@0xa0000(env),0x500000@0xc0000(uimage),0x1a40000@0x5c0000(rootfs)" |
| CONFIG_CMD_UBI=y |
| CONFIG_ISO_PARTITION=y |
| CONFIG_EFI_PARTITION=y |
| # CONFIG_PARTITION_UUIDS is not set |
| CONFIG_OF_CONTROL=y |
| CONFIG_ENV_OVERWRITE=y |
| CONFIG_ENV_IS_IN_NAND=y |
| CONFIG_SYS_RELOC_GD_ENV_ADDR=y |
| CONFIG_NETCONSOLE=y |
| CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y |
| CONFIG_SYS_ATA_STRIDE=4 |
| CONFIG_SYS_ATA_DATA_OFFSET=0x100 |
| CONFIG_SYS_ATA_REG_OFFSET=0x100 |
| CONFIG_SYS_ATA_ALT_OFFSET=0x100 |
| CONFIG_LBA48=y |
| CONFIG_KIRKWOOD_GPIO=y |
| # CONFIG_MMC is not set |
| CONFIG_MTD=y |
| CONFIG_MTD_RAW_NAND=y |
| CONFIG_MVGBE=y |
| CONFIG_MII=y |
| CONFIG_DM_RTC=y |
| CONFIG_RTC_MV=y |
| CONFIG_SYS_NS16550_SERIAL=y |
| CONFIG_SYS_NS16550_REG_SIZE=-4 |
| CONFIG_USB=y |
| CONFIG_USB_EHCI_HCD=y |
| CONFIG_USB_STORAGE=y |
| CONFIG_JFFS2_LZO=y |
| CONFIG_JFFS2_NAND=y |