| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2012 Michal Simek <monstr@monstr.eu> |
| * (C) Copyright 2013 - 2018 Xilinx, Inc. |
| */ |
| |
| #include <common.h> |
| #include <init.h> |
| #include <dm/uclass.h> |
| #include <env.h> |
| #include <fdtdec.h> |
| #include <fpga.h> |
| #include <malloc.h> |
| #include <mmc.h> |
| #include <watchdog.h> |
| #include <wdt.h> |
| #include <zynqpl.h> |
| #include <asm/arch/hardware.h> |
| #include <asm/arch/sys_proto.h> |
| #include "../common/board.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| int board_init(void) |
| { |
| return 0; |
| } |
| |
| int board_late_init(void) |
| { |
| int env_targets_len = 0; |
| const char *mode; |
| char *new_targets; |
| char *env_targets; |
| |
| switch ((zynq_slcr_get_boot_mode()) & ZYNQ_BM_MASK) { |
| case ZYNQ_BM_QSPI: |
| mode = "qspi"; |
| env_set("modeboot", "qspiboot"); |
| break; |
| case ZYNQ_BM_NAND: |
| mode = "nand"; |
| env_set("modeboot", "nandboot"); |
| break; |
| case ZYNQ_BM_NOR: |
| mode = "nor"; |
| env_set("modeboot", "norboot"); |
| break; |
| case ZYNQ_BM_SD: |
| mode = "mmc0"; |
| env_set("modeboot", "sdboot"); |
| break; |
| case ZYNQ_BM_JTAG: |
| mode = "jtag pxe dhcp"; |
| env_set("modeboot", "jtagboot"); |
| break; |
| default: |
| mode = ""; |
| env_set("modeboot", ""); |
| break; |
| } |
| |
| /* |
| * One terminating char + one byte for space between mode |
| * and default boot_targets |
| */ |
| env_targets = env_get("boot_targets"); |
| if (env_targets) |
| env_targets_len = strlen(env_targets); |
| |
| new_targets = calloc(1, strlen(mode) + env_targets_len + 2); |
| if (!new_targets) |
| return -ENOMEM; |
| |
| sprintf(new_targets, "%s %s", mode, |
| env_targets ? env_targets : ""); |
| |
| env_set("boot_targets", new_targets); |
| |
| return board_late_init_xilinx(); |
| } |
| |
| #if !defined(CONFIG_SYS_SDRAM_BASE) && !defined(CONFIG_SYS_SDRAM_SIZE) |
| int dram_init_banksize(void) |
| { |
| return fdtdec_setup_memory_banksize(); |
| } |
| |
| int dram_init(void) |
| { |
| if (fdtdec_setup_mem_size_base() != 0) |
| return -EINVAL; |
| |
| zynq_ddrc_init(); |
| |
| return 0; |
| } |
| #else |
| int dram_init(void) |
| { |
| gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, |
| CONFIG_SYS_SDRAM_SIZE); |
| |
| zynq_ddrc_init(); |
| |
| return 0; |
| } |
| #endif |