include/configs/lwmon.h - platform/external/u-boot - Gitiles

 /*
  * (C) Copyright 2001
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 /*
  * board/config.h - configuration options, board specific
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 /* External logbuffer support */
 #define CONFIG_LOGBUFFER

 /*
  * High Level Configuration Options
  * (easy to change)
  */

 #define CONFIG_MPC823		1	/* This is a MPC823E CPU	*/
 #define CONFIG_LWMON		1	/* ...on a LWMON board		*/

 #define CONFIG_BOARD_PRE_INIT	1	/* Call board_pre_init		*/

 #define CONFIG_LCD		1	/* use LCD controller ...	*/
 #define CONFIG_HLD1045		1	/* ... with a HLD1045 display	*/

 #if 1
 #define CONFIG_8xx_CONS_SMC2	1	/* Console is on SMC2		*/
 #else
 #define CONFIG_8xx_CONS_SCC2
 #endif

 #define CONFIG_BAUDRATE		115200	/* with watchdog >= 38400 needed */

 #define CONFIG_BOOTDELAY	1	/* autoboot after 1 second	*/

 #define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */

 /* pre-boot commands */
 #define	CONFIG_PREBOOT		"setenv bootdelay 15"

 #undef	CONFIG_BOOTARGS

 /* POST support */
 #define CONFIG_POST		(CFG_POST_CACHE	   | \
 				 CFG_POST_WATCHDOG | \
 				 CFG_POST_RTC	   | \
 				 CFG_POST_MEMORY   | \
 				 CFG_POST_CPU	   | \
 				 CFG_POST_UART	   | \
 				 CFG_POST_ETHER    | \
 				 CFG_POST_I2C	   | \
 				 CFG_POST_SPI	   | \
 				 CFG_POST_USB	   | \
 				 CFG_POST_SPR)

 #define CONFIG_BOOTCOMMAND	"run flash_self"

 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	"kernel_addr=40080000\0"					\
 	"ramdisk_addr=40280000\0"					\
 	"magic_keys=#3\0"						\
 	"key_magic#=28\0"						\
 	"key_cmd#=setenv addfb setenv 'bootargs $bootargs console=tty0'\0" \
 	"key_magic3=3C+3F\0"						\
 	"key_cmd3=echo *** Entering Test Mode ***;"			\
 		"setenv add_misc 'setenv bootargs $bootargs testmode'\0" \
 	"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath\0" \
 	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
 	"addfb=setenv bootargs $bootargs console=ttyS1,$baudrate\0"	\
 	"addip=setenv bootargs $bootargs "				\
 		"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \
 		"panic=1\0"						\
 	"add_wdt=setenv bootargs $bootargs $wdt_args\0"			\
 	"add_misc=setenv bootargs $bootargs runmode\0"			\
 	"flash_nfs=run nfsargs addip add_wdt addfb add_misc;"		\
 		"bootm $kernel_addr\0"					\
 	"flash_self=run ramargs addip add_wdt addfb add_misc;"		\
 		"bootm $kernel_addr $ramdisk_addr\0"			\
 	"net_nfs=tftp 100000 /tftpboot/uImage.lwmon;"			\
 		"run nfsargs addip add_wdt addfb;bootm\0"		\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
 	"load=tftp 100000 /tftpboot/u-boot.bin\0"			\
 	"update=protect off 1:0;era 1:0;cp.b 100000 40000000 $filesize\0" \
 	"wdt_args=wdt_8xx=off\0"					\
 	"verify=no"

 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/

 #define	CONFIG_WATCHDOG		1	/* watchdog enabled		*/

 #undef	CONFIG_STATUS_LED		/* Status LED disabled		*/

 /* enable I2C and select the hardware/software driver */
 #undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
 #define	CONFIG_SOFT_I2C         1	/* I2C bit-banged		*/

 #define CFG_I2C_SPEED		93000	/* 93 kHz is supposed to work	*/
 #define CFG_I2C_SLAVE		0xFE

 #ifdef CONFIG_SOFT_I2C
 /*
  * Software (bit-bang) I2C driver configuration
  */
 #define PB_SCL		0x00000020	/* PB 26 */
 #define PB_SDA		0x00000010	/* PB 27 */

 #define I2C_INIT	(immr->im_cpm.cp_pbdir |=  PB_SCL)
 #define I2C_ACTIVE	(immr->im_cpm.cp_pbdir |=  PB_SDA)
 #define I2C_TRISTATE	(immr->im_cpm.cp_pbdir &= ~PB_SDA)
 #define I2C_READ	((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
 #define I2C_SDA(bit)	if(bit) immr->im_cpm.cp_pbdat |=  PB_SDA; \
 			else    immr->im_cpm.cp_pbdat &= ~PB_SDA
 #define I2C_SCL(bit)	if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
 			else    immr->im_cpm.cp_pbdat &= ~PB_SCL
 #define I2C_DELAY	udelay(1)	/* 1/4 I2C clock duration */
 #endif	/* CONFIG_SOFT_I2C */


 #define CONFIG_RTC_PCF8563		/* use Philips PCF8563 RTC	*/

 #ifdef CONFIG_POST
 #define CFG_CMD_POST_DIAG CFG_CMD_DIAG
 #else
 #define CFG_CMD_POST_DIAG 0
 #endif

 #ifdef CONFIG_8xx_CONS_SCC2	/* Can't use ethernet, then */
 #define CONFIG_COMMANDS	     ( (CONFIG_CMD_DFL & ~CFG_CMD_NET) | \
 				CFG_CMD_DATE	| \
 				CFG_CMD_I2C	| \
 				CFG_CMD_EEPROM	| \
 				CFG_CMD_IDE	| \
 				CFG_CMD_BSP	| \
 				CFG_CMD_BMP	| \
 				CFG_CMD_POST_DIAG )
 #else
 #define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
 				CFG_CMD_DHCP	| \
 				CFG_CMD_DATE	| \
 				CFG_CMD_I2C	| \
 				CFG_CMD_EEPROM	| \
 				CFG_CMD_IDE	| \
 				CFG_CMD_BSP	| \
 				CFG_CMD_BMP	| \
 				CFG_CMD_POST_DIAG )
 #endif
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION

 #define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)

 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>

 /*----------------------------------------------------------------------*/

 /*
  * Miscellaneous configurable options
  */
 #define CFG_LONGHELP			/* undef to save memory		*/
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/

 #define	CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
 #endif
 #ifdef	CFG_HUSH_PARSER
 #define	CFG_PROMPT_HUSH_PS2	"> "

 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
 #define CFG_MAXARGS	16		/* max number of command args	*/
 #define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/

 #define CFG_MEMTEST_START	0x00100000	/* memtest works on	*/
 #define CFG_MEMTEST_END		0x00F00000	/* 1 ... 15MB in DRAM	*/

 #define CFG_LOAD_ADDR		0x00100000	/* default load address */

 #define CFG_PIO_MODE		0	/* IDE interface in PIO Mode 0	*/

 #define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */

 /*
  * When the watchdog is enabled, output must be fast enough in Linux.
  */
 #ifdef CONFIG_WATCHDOG
 #define CFG_BAUDRATE_TABLE	{		38400, 57600, 115200 }
 #else
 #define CFG_BAUDRATE_TABLE	{  9600, 19200, 38400, 57600, 115200 }
 #endif

 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
  * You should know what you are doing if you make changes here.
  */
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
 #define CFG_IMMR		0xFFF00000

 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CFG_INIT_RAM_ADDR	CFG_IMMR
 #define CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
 #define CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET

 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
  * Please note that CFG_SDRAM_BASE _must_ start at 0
  */
 #define CFG_SDRAM_BASE		0x00000000
 #define CFG_FLASH_BASE		0x40000000
 #if defined(DEBUG) || (CONFIG_COMMANDS & CFG_CMD_IDE)
 #define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #else
 #define CFG_MONITOR_LEN		(128 << 10)	/* Reserve 128 kB for Monitor	*/
 #endif
 #define CFG_MONITOR_BASE	CFG_FLASH_BASE
 #define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/

 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 #define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
 #define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip	*/

 #define CFG_FLASH_ERASE_TOUT	180000	/* Timeout for Flash Erase (in ms)	*/
 #define CFG_FLASH_WRITE_TOUT	600	/* Timeout for Flash Write (in ms)	*/

 #if 1
 /* Put environment in flash which is much faster to boot */
 #define CFG_ENV_IS_IN_FLASH	1
 #define CFG_ENV_ADDR	    0x40040000	/* Address    of Environment Sector	*/
 #define CFG_ENV_SIZE		0x2000	/* Total Size of Environment		*/
 #define CFG_ENV_SECT_SIZE	0x40000 /* we have BIG sectors only :-(		*/
 #else
 /* Environment in EEPROM */
 #define CFG_ENV_IS_IN_EEPROM	1
 #define CFG_ENV_OFFSET		0
 #define CFG_ENV_SIZE		2048
 #endif
 /*-----------------------------------------------------------------------
  * I2C/EEPROM Configuration
  */

 #define CFG_I2C_AUDIO_ADDR	0x28	/* Audio volume control			*/
 #define CFG_I2C_SYSMON_ADDR	0x2E	/* LM87 System Monitor			*/
 #define CFG_I2C_RTC_ADDR	0x51	/* PCF8563 RTC				*/
 #define CFG_I2C_POWER_A_ADDR	0x52	/* PCMCIA/USB power switch, channel A	*/
 #define CFG_I2C_POWER_B_ADDR	0x53	/* PCMCIA/USB power switch, channel B	*/
 #define CFG_I2C_KEYBD_ADDR	0x56	/* PIC LWE keyboard			*/
 #define CFG_I2C_PICIO_ADDR	0x57	/* PIC IO Expander			*/

 #undef	CONFIG_USE_FRAM			/* Use FRAM instead of EEPROM	*/

 #ifdef CONFIG_USE_FRAM	/* use FRAM */
 #define CFG_I2C_EEPROM_ADDR	0x55	/* FRAM FM24CL64		*/
 #define CFG_I2C_EEPROM_ADDR_LEN	2
 #else			/* use EEPROM */
 #define CFG_I2C_EEPROM_ADDR	0x58	/* EEPROM AT24C164		*/
 #define CFG_I2C_EEPROM_ADDR_LEN	1
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* takes up to 10 msec	*/
 #endif	/* CONFIG_USE_FRAM */
 #define CFG_EEPROM_PAGE_WRITE_BITS	4

 /* List of I2C addresses to be verified by POST */
 #ifdef CONFIG_USE_FRAM
 #define I2C_ADDR_LIST	{  /*	CFG_I2C_AUDIO_ADDR, */	\
 				CFG_I2C_SYSMON_ADDR,	\
 				CFG_I2C_RTC_ADDR,	\
 				CFG_I2C_POWER_A_ADDR,	\
 				CFG_I2C_POWER_B_ADDR,	\
 				CFG_I2C_KEYBD_ADDR,	\
 				CFG_I2C_PICIO_ADDR,	\
 				CFG_I2C_EEPROM_ADDR,	\
 			}
 #else	/* Use EEPROM - which show up on 8 consequtive addresses */
 #define I2C_ADDR_LIST	{  /*	CFG_I2C_AUDIO_ADDR, */	\
 				CFG_I2C_SYSMON_ADDR,	\
 				CFG_I2C_RTC_ADDR,	\
 				CFG_I2C_POWER_A_ADDR,	\
 				CFG_I2C_POWER_B_ADDR,	\
 				CFG_I2C_KEYBD_ADDR,	\
 				CFG_I2C_PICIO_ADDR,	\
 				CFG_I2C_EEPROM_ADDR+0,	\
 				CFG_I2C_EEPROM_ADDR+1,	\
 				CFG_I2C_EEPROM_ADDR+2,	\
 				CFG_I2C_EEPROM_ADDR+3,	\
 				CFG_I2C_EEPROM_ADDR+4,	\
 				CFG_I2C_EEPROM_ADDR+5,	\
 				CFG_I2C_EEPROM_ADDR+6,	\
 				CFG_I2C_EEPROM_ADDR+7,	\
 			}
 #endif	/* CONFIG_USE_FRAM */

 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif

 /*-----------------------------------------------------------------------
  * SYPCR - System Protection Control				11-9
  * SYPCR can only be written once after reset!
  *-----------------------------------------------------------------------
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if 0 && defined(CONFIG_WATCHDOG)	/* LWMON uses external MAX706TESA WD */
 #define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
 #define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif

 /*-----------------------------------------------------------------------
  * SIUMCR - SIU Module Configuration				11-6
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
 /* EARB, DBGC and DBPC are initialised by the HCW */
 /* => 0x000000C0 */
 #define CFG_SIUMCR	(SIUMCR_GB5E)
 /*#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) */

 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
 #define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)

 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
 #define CFG_PISCR	(PISCR_PS | PISCR_PITF)

 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
  *-----------------------------------------------------------------------
  * Reset PLL lock status sticky bit, timer expired status bit and timer
  * interrupt status bit, set PLL multiplication factor !
  */
 /* 0x00405000 */
 #define CFG_PLPRCR_MF	4	/* (4+1) * 13.2 = 66 MHz Clock */
 #define CFG_PLPRCR							\
 		(	(CFG_PLPRCR_MF << PLPRCR_MF_SHIFT) |		\
 			PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST |	\
 			/*PLPRCR_CSRC|*/ PLPRCR_LPM_NORMAL |		\
 			PLPRCR_CSR    /*| PLPRCR_LOLRE|PLPRCR_FIOPD*/	\
 		)

 #define CONFIG_8xx_GCLK_FREQ	((CFG_PLPRCR_MF+1)*13200000)

 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
  *-----------------------------------------------------------------------
  * Set clock output, timebase and RTC source and divider,
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
 /* 0x01800000 */
 #define CFG_SCCR	(SCCR_COM00	| /*SCCR_TBS|*/		\
 			 SCCR_RTDIV	|   SCCR_RTSEL	  |	\
 			 /*SCCR_CRQEN|*/  /*SCCR_PRQEN|*/	\
 			 SCCR_EBDF00 |	 SCCR_DFSYNC00 |	\
 			 SCCR_DFBRG00	|   SCCR_DFNL000  |	\
 			 SCCR_DFNH000	|   SCCR_DFLCD100 |	\
 			 SCCR_DFALCD01)

 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
 /* 0x00C3 => 0x0003 */
 #define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)


 /*-----------------------------------------------------------------------
  * RCCR - RISC Controller Configuration Register		19-4
  *-----------------------------------------------------------------------
  */
 #define CFG_RCCR 0x0000

 /*-----------------------------------------------------------------------
  * RMDS - RISC Microcode Development Support Control Register
  *-----------------------------------------------------------------------
  */
 #define CFG_RMDS 0

 /*-----------------------------------------------------------------------
  *
  * Interrupt Levels
  *-----------------------------------------------------------------------
  */
 #define CFG_CPM_INTERRUPT	13	/* SIU_LEVEL6	*/

 /*-----------------------------------------------------------------------
  * PCMCIA stuff
  *-----------------------------------------------------------------------
  *
  */
 #define CFG_PCMCIA_MEM_ADDR	(0x50000000)
 #define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
 #define CFG_PCMCIA_DMA_ADDR	(0x54000000)
 #define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
 #define CFG_PCMCIA_ATTRB_ADDR	(0x58000000)
 #define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
 #define CFG_PCMCIA_IO_ADDR	(0x5C000000)
 #define CFG_PCMCIA_IO_SIZE	( 64 << 20 )

 /*-----------------------------------------------------------------------
  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
  *-----------------------------------------------------------------------
  */

 #define CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card Adapter */

 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
 #undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/

 #define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
 #define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/

 #define CFG_ATA_IDE0_OFFSET	0x0000

 #define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR

 /* Offset for data I/O			*/
 #define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)

 /* Offset for normal register accesses	*/
 #define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)

 /* Offset for alternate registers	*/
 #define CFG_ATA_ALT_OFFSET	0x0100

 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
 /*#define	CFG_DER 0x2002000F*/
 #define CFG_DER 0

 /*
  * Init Memory Controller:
  *
  * BR0/1 and OR0/1 (FLASH) - second Flash bank optional
  */

 #define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
 #define FLASH_BASE1_PRELIM	0x41000000	/* FLASH bank #1	*/

 /* used to re-map FLASH:
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
 #define CFG_REMAP_OR_AM		0xFF000000	/* OR addr mask */
 #define CFG_PRELIM_OR_AM	0xFF000000	/* OR addr mask */

 /* FLASH timing: ACS = 00, TRLX = 0, CSNT = 1, SCY = 8, EHTR = 0	*/
 #define CFG_OR_TIMING_FLASH	(OR_SCY_8_CLK)

 #define CFG_OR0_REMAP	( CFG_REMAP_OR_AM | OR_CSNT_SAM | OR_ACS_DIV1 | OR_BI | \
 				CFG_OR_TIMING_FLASH)
 #define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | OR_ACS_DIV1 | OR_BI | \
 				CFG_OR_TIMING_FLASH)
 /* 16 bit, bank valid */
 #define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_32 | BR_V )

 #define CFG_OR1_REMAP	CFG_OR0_REMAP
 #define CFG_OR1_PRELIM	CFG_OR0_PRELIM
 #define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_PS_32 | BR_V )

 /*
  * BR3/OR3: SDRAM
  *
  * Multiplexed addresses, GPL5 output to GPL5_A (don't care)
  */
 #define SDRAM_BASE3_PRELIM	0x00000000	/* SDRAM bank */
 #define SDRAM_PRELIM_OR_AM	0xF0000000	/* map 256 MB (>SDRAM_MAX_SIZE!) */
 #define SDRAM_TIMING		OR_SCY_0_CLK	/* SDRAM-Timing */

 #define SDRAM_MAX_SIZE		0x08000000	/* max 128 MB SDRAM */

 #define CFG_OR3_PRELIM	(SDRAM_PRELIM_OR_AM | OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING )
 #define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )

 /*
  * BR5/OR5: Touch Panel
  *
  * AM=0xFFC00 ATM=0 CSNT/SAM=0 ACS/G5LA/G5LS=3 BIH=1 SCY=0 SETA=0 TRLX=0 EHTR=0
  */
 #define TOUCHPNL_BASE		0x20000000
 #define TOUCHPNL_OR_AM		0xFFFF8000
 #define TOUCHPNL_TIMING		OR_SCY_0_CLK

 #define CFG_OR5_PRELIM	(TOUCHPNL_OR_AM | OR_CSNT_SAM | OR_ACS_DIV1 | OR_BI | \
 			 TOUCHPNL_TIMING )
 #define CFG_BR5_PRELIM	((TOUCHPNL_BASE & BR_BA_MSK) | BR_PS_32 | BR_V )

 #define	CFG_MEMORY_75
 #undef	CFG_MEMORY_7E
 #undef	CFG_MEMORY_8E

 /*
  * Memory Periodic Timer Prescaler
  */

 /* periodic timer for refresh */
 #define CFG_MPTPR	0x200

 /*
  * MAMR settings for SDRAM
  */

 #define CFG_MAMR_8COL	0x80802114
 #define CFG_MAMR_9COL	0x80904114

 /*
  * MAR setting for SDRAM
  */
 #define CFG_MAR		0x00000088

 /*
  * Internal Definitions
  *
  * Boot Flags
  */
 #define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/

 #endif	/* __CONFIG_H */
	/*
	* (C) Copyright 2001
	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	/*
	* board/config.h - configuration options, board specific
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	/* External logbuffer support */
	#define CONFIG_LOGBUFFER

	/*
	* High Level Configuration Options
	* (easy to change)
	*/

	#define CONFIG_MPC823 1 /* This is a MPC823E CPU */
	#define CONFIG_LWMON 1 /* ...on a LWMON board */

	#define CONFIG_BOARD_PRE_INIT 1 /* Call board_pre_init */

	#define CONFIG_LCD 1 /* use LCD controller ... */
	#define CONFIG_HLD1045 1 /* ... with a HLD1045 display */

	#if 1
	#define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */
	#else
	#define CONFIG_8xx_CONS_SCC2
	#endif

	#define CONFIG_BAUDRATE 115200 /* with watchdog >= 38400 needed */

	#define CONFIG_BOOTDELAY 1 /* autoboot after 1 second */

	#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */

	/* pre-boot commands */
	#define CONFIG_PREBOOT "setenv bootdelay 15"

	#undef CONFIG_BOOTARGS

	/* POST support */
	#define CONFIG_POST (CFG_POST_CACHE \| \
	CFG_POST_WATCHDOG \| \
	CFG_POST_RTC \| \
	CFG_POST_MEMORY \| \
	CFG_POST_CPU \| \
	CFG_POST_UART \| \
	CFG_POST_ETHER \| \
	CFG_POST_I2C \| \
	CFG_POST_SPI \| \
	CFG_POST_USB \| \
	CFG_POST_SPR)

	#define CONFIG_BOOTCOMMAND "run flash_self"

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"kernel_addr=40080000\0" \
	"ramdisk_addr=40280000\0" \
	"magic_keys=#3\0" \
	"key_magic#=28\0" \
	"key_cmd#=setenv addfb setenv 'bootargs $bootargs console=tty0'\0" \
	"key_magic3=3C+3F\0" \
	"key_cmd3=echo * Entering Test Mode *;" \
	"setenv add_misc 'setenv bootargs $bootargs testmode'\0" \
	"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath\0" \
	"ramargs=setenv bootargs root=/dev/ram rw\0" \
	"addfb=setenv bootargs $bootargs console=ttyS1,$baudrate\0" \
	"addip=setenv bootargs $bootargs " \
	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \
	"panic=1\0" \
	"add_wdt=setenv bootargs $bootargs $wdt_args\0" \
	"add_misc=setenv bootargs $bootargs runmode\0" \
	"flash_nfs=run nfsargs addip add_wdt addfb add_misc;" \
	"bootm $kernel_addr\0" \
	"flash_self=run ramargs addip add_wdt addfb add_misc;" \
	"bootm $kernel_addr $ramdisk_addr\0" \
	"net_nfs=tftp 100000 /tftpboot/uImage.lwmon;" \
	"run nfsargs addip add_wdt addfb;bootm\0" \
	"rootpath=/opt/eldk/ppc_8xx\0" \
	"load=tftp 100000 /tftpboot/u-boot.bin\0" \
	"update=protect off 1:0;era 1:0;cp.b 100000 40000000 $filesize\0" \
	"wdt_args=wdt_8xx=off\0" \
	"verify=no"

	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
	#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */

	#define CONFIG_WATCHDOG 1 /* watchdog enabled */

	#undef CONFIG_STATUS_LED /* Status LED disabled */

	/* enable I2C and select the hardware/software driver */
	#undef CONFIG_HARD_I2C /* I2C with hardware support */
	#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */

	#define CFG_I2C_SPEED 93000 /* 93 kHz is supposed to work */
	#define CFG_I2C_SLAVE 0xFE

	#ifdef CONFIG_SOFT_I2C
	/*
	* Software (bit-bang) I2C driver configuration
	*/
	#define PB_SCL 0x00000020 /* PB 26 */
	#define PB_SDA 0x00000010 /* PB 27 */

	#define I2C_INIT (immr->im_cpm.cp_pbdir \|= PB_SCL)
	#define I2C_ACTIVE (immr->im_cpm.cp_pbdir \|= PB_SDA)
	#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA)
	#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
	#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat \|= PB_SDA; \
	else immr->im_cpm.cp_pbdat &= ~PB_SDA
	#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat \|= PB_SCL; \
	else immr->im_cpm.cp_pbdat &= ~PB_SCL
	#define I2C_DELAY udelay(1) /* 1/4 I2C clock duration */
	#endif /* CONFIG_SOFT_I2C */


	#define CONFIG_RTC_PCF8563 /* use Philips PCF8563 RTC */

	#ifdef CONFIG_POST
	#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
	#else
	#define CFG_CMD_POST_DIAG 0
	#endif

	#ifdef CONFIG_8xx_CONS_SCC2 /* Can't use ethernet, then */
	#define CONFIG_COMMANDS ( (CONFIG_CMD_DFL & ~CFG_CMD_NET) \| \
	CFG_CMD_DATE \| \
	CFG_CMD_I2C \| \
	CFG_CMD_EEPROM \| \
	CFG_CMD_IDE \| \
	CFG_CMD_BSP \| \
	CFG_CMD_BMP \| \
	CFG_CMD_POST_DIAG )
	#else
	#define CONFIG_COMMANDS ( CONFIG_CMD_DFL \| \
	CFG_CMD_DHCP \| \
	CFG_CMD_DATE \| \
	CFG_CMD_I2C \| \
	CFG_CMD_EEPROM \| \
	CFG_CMD_IDE \| \
	CFG_CMD_BSP \| \
	CFG_CMD_BMP \| \
	CFG_CMD_POST_DIAG )
	#endif
	#define CONFIG_MAC_PARTITION
	#define CONFIG_DOS_PARTITION

	#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT \| CONFIG_BOOTP_BOOTFILESIZE)

	/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
	#include <cmd_confdefs.h>

	/----------------------------------------------------------------------/

	/*
	* Miscellaneous configurable options
	*/
	#define CFG_LONGHELP /* undef to save memory */
	#define CFG_PROMPT "=> " /* Monitor Command Prompt */

	#define CFG_HUSH_PARSER 1 /* use "hush" command parser */
	#endif
	#ifdef CFG_HUSH_PARSER
	#define CFG_PROMPT_HUSH_PS2 "> "

	#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
	#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
	#else
	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
	#endif
	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
	#define CFG_MAXARGS 16 /* max number of command args */
	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */

	#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
	#define CFG_MEMTEST_END 0x00F00000 /* 1 ... 15MB in DRAM */

	#define CFG_LOAD_ADDR 0x00100000 /* default load address */

	#define CFG_PIO_MODE 0 /* IDE interface in PIO Mode 0 */

	#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */

	/*
	* When the watchdog is enabled, output must be fast enough in Linux.
	*/
	#ifdef CONFIG_WATCHDOG
	#define CFG_BAUDRATE_TABLE { 38400, 57600, 115200 }
	#else
	#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
	#endif

	/*
	* Low Level Configuration Settings
	* (address mappings, register initial values, etc.)
	* You should know what you are doing if you make changes here.
	*/
	/*-----------------------------------------------------------------------
	* Internal Memory Mapped Register
	*/
	#define CFG_IMMR 0xFFF00000

	/*-----------------------------------------------------------------------
	* Definitions for initial stack pointer and data area (in DPRAM)
	*/
	#define CFG_INIT_RAM_ADDR CFG_IMMR
	#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
	#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
	#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET

	/*-----------------------------------------------------------------------
	* Start addresses for the final memory configuration
	* (Set up by the startup code)
	* Please note that CFG_SDRAM_BASE _must_ start at 0
	*/
	#define CFG_SDRAM_BASE 0x00000000
	#define CFG_FLASH_BASE 0x40000000
	#if defined(DEBUG) \|\| (CONFIG_COMMANDS & CFG_CMD_IDE)
	#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
	#else
	#define CFG_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */
	#endif
	#define CFG_MONITOR_BASE CFG_FLASH_BASE
	#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */

	/*
	* For booting Linux, the board info and command line data
	* have to be in the first 8 MB of memory, since this is
	* the maximum mapped by the Linux kernel during initialization.
	*/
	#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
	/*-----------------------------------------------------------------------
	* FLASH organization
	*/
	#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
	#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */

	#define CFG_FLASH_ERASE_TOUT 180000 /* Timeout for Flash Erase (in ms) */
	#define CFG_FLASH_WRITE_TOUT 600 /* Timeout for Flash Write (in ms) */

	#if 1
	/* Put environment in flash which is much faster to boot */
	#define CFG_ENV_IS_IN_FLASH 1
	#define CFG_ENV_ADDR 0x40040000 /* Address of Environment Sector */
	#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment */
	#define CFG_ENV_SECT_SIZE 0x40000 /* we have BIG sectors only :-( */
	#else
	/* Environment in EEPROM */
	#define CFG_ENV_IS_IN_EEPROM 1
	#define CFG_ENV_OFFSET 0
	#define CFG_ENV_SIZE 2048
	#endif
	/*-----------------------------------------------------------------------
	* I2C/EEPROM Configuration
	*/

	#define CFG_I2C_AUDIO_ADDR 0x28 /* Audio volume control */
	#define CFG_I2C_SYSMON_ADDR 0x2E /* LM87 System Monitor */
	#define CFG_I2C_RTC_ADDR 0x51 /* PCF8563 RTC */
	#define CFG_I2C_POWER_A_ADDR 0x52 /* PCMCIA/USB power switch, channel A */
	#define CFG_I2C_POWER_B_ADDR 0x53 /* PCMCIA/USB power switch, channel B */
	#define CFG_I2C_KEYBD_ADDR 0x56 /* PIC LWE keyboard */
	#define CFG_I2C_PICIO_ADDR 0x57 /* PIC IO Expander */

	#undef CONFIG_USE_FRAM /* Use FRAM instead of EEPROM */

	#ifdef CONFIG_USE_FRAM /* use FRAM */
	#define CFG_I2C_EEPROM_ADDR 0x55 /* FRAM FM24CL64 */
	#define CFG_I2C_EEPROM_ADDR_LEN 2
	#else /* use EEPROM */
	#define CFG_I2C_EEPROM_ADDR 0x58 /* EEPROM AT24C164 */
	#define CFG_I2C_EEPROM_ADDR_LEN 1
	#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* takes up to 10 msec */
	#endif /* CONFIG_USE_FRAM */
	#define CFG_EEPROM_PAGE_WRITE_BITS 4

	/* List of I2C addresses to be verified by POST */
	#ifdef CONFIG_USE_FRAM
	#define I2C_ADDR_LIST { /* CFG_I2C_AUDIO_ADDR, */ \
	CFG_I2C_SYSMON_ADDR, \
	CFG_I2C_RTC_ADDR, \
	CFG_I2C_POWER_A_ADDR, \
	CFG_I2C_POWER_B_ADDR, \
	CFG_I2C_KEYBD_ADDR, \
	CFG_I2C_PICIO_ADDR, \
	CFG_I2C_EEPROM_ADDR, \
	}
	#else /* Use EEPROM - which show up on 8 consequtive addresses */
	#define I2C_ADDR_LIST { /* CFG_I2C_AUDIO_ADDR, */ \
	CFG_I2C_SYSMON_ADDR, \
	CFG_I2C_RTC_ADDR, \
	CFG_I2C_POWER_A_ADDR, \
	CFG_I2C_POWER_B_ADDR, \
	CFG_I2C_KEYBD_ADDR, \
	CFG_I2C_PICIO_ADDR, \
	CFG_I2C_EEPROM_ADDR+0, \
	CFG_I2C_EEPROM_ADDR+1, \
	CFG_I2C_EEPROM_ADDR+2, \
	CFG_I2C_EEPROM_ADDR+3, \
	CFG_I2C_EEPROM_ADDR+4, \
	CFG_I2C_EEPROM_ADDR+5, \
	CFG_I2C_EEPROM_ADDR+6, \
	CFG_I2C_EEPROM_ADDR+7, \
	}
	#endif /* CONFIG_USE_FRAM */

	/*-----------------------------------------------------------------------
	* Cache Configuration
	*/
	#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
	#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
	#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
	#endif

	/*-----------------------------------------------------------------------
	* SYPCR - System Protection Control 11-9
	* SYPCR can only be written once after reset!
	*-----------------------------------------------------------------------
	* Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
	*/
	#if 0 && defined(CONFIG_WATCHDOG) /* LWMON uses external MAX706TESA WD */
	#define CFG_SYPCR (SYPCR_SWTC \| SYPCR_BMT \| SYPCR_BME \| SYPCR_SWF \| \
	SYPCR_SWE \| SYPCR_SWRI\| SYPCR_SWP)
	#else
	#define CFG_SYPCR (SYPCR_SWTC \| SYPCR_BMT \| SYPCR_BME \| SYPCR_SWF \| SYPCR_SWP)
	#endif

	/*-----------------------------------------------------------------------
	* SIUMCR - SIU Module Configuration 11-6
	*-----------------------------------------------------------------------
	* PCMCIA config., multi-function pin tri-state
	*/
	/* EARB, DBGC and DBPC are initialised by the HCW */
	/* => 0x000000C0 */
	#define CFG_SIUMCR (SIUMCR_GB5E)
	/#define CFG_SIUMCR (SIUMCR_DBGC00 \| SIUMCR_DBPC00 \| SIUMCR_MLRC01) /

	/*-----------------------------------------------------------------------
	* TBSCR - Time Base Status and Control 11-26
	*-----------------------------------------------------------------------
	* Clear Reference Interrupt Status, Timebase freezing enabled
	*/
	#define CFG_TBSCR (TBSCR_REFA \| TBSCR_REFB \| TBSCR_TBF)

	/*-----------------------------------------------------------------------
	* PISCR - Periodic Interrupt Status and Control 11-31
	*-----------------------------------------------------------------------
	* Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
	*/
	#define CFG_PISCR (PISCR_PS \| PISCR_PITF)

	/*-----------------------------------------------------------------------
	* PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
	*-----------------------------------------------------------------------
	* Reset PLL lock status sticky bit, timer expired status bit and timer
	* interrupt status bit, set PLL multiplication factor !
	*/
	/* 0x00405000 */
	#define CFG_PLPRCR_MF 4 /* (4+1) * 13.2 = 66 MHz Clock */
	#define CFG_PLPRCR \
	( (CFG_PLPRCR_MF << PLPRCR_MF_SHIFT) \| \
	PLPRCR_SPLSS \| PLPRCR_TEXPS \| PLPRCR_TMIST \| \
	/PLPRCR_CSRC\|/ PLPRCR_LPM_NORMAL \| \
	PLPRCR_CSR /\| PLPRCR_LOLRE\|PLPRCR_FIOPD/ \
	)

	#define CONFIG_8xx_GCLK_FREQ ((CFG_PLPRCR_MF+1)*13200000)

	/*-----------------------------------------------------------------------
	* SCCR - System Clock and reset Control Register 15-27
	*-----------------------------------------------------------------------
	* Set clock output, timebase and RTC source and divider,
	* power management and some other internal clocks
	*/
	#define SCCR_MASK SCCR_EBDF11
	/* 0x01800000 */
	#define CFG_SCCR (SCCR_COM00 \| /SCCR_TBS\|/ \
	SCCR_RTDIV \| SCCR_RTSEL \| \
	/SCCR_CRQEN\|/ /SCCR_PRQEN\|/ \
	SCCR_EBDF00 \| SCCR_DFSYNC00 \| \
	SCCR_DFBRG00 \| SCCR_DFNL000 \| \
	SCCR_DFNH000 \| SCCR_DFLCD100 \| \
	SCCR_DFALCD01)

	/*-----------------------------------------------------------------------
	* RTCSC - Real-Time Clock Status and Control Register 11-27
	*-----------------------------------------------------------------------
	*/
	/* 0x00C3 => 0x0003 */
	#define CFG_RTCSC (RTCSC_SEC \| RTCSC_ALR \| RTCSC_RTF\| RTCSC_RTE)


	/*-----------------------------------------------------------------------
	* RCCR - RISC Controller Configuration Register 19-4
	*-----------------------------------------------------------------------
	*/
	#define CFG_RCCR 0x0000

	/*-----------------------------------------------------------------------
	* RMDS - RISC Microcode Development Support Control Register
	*-----------------------------------------------------------------------
	*/
	#define CFG_RMDS 0

	/*-----------------------------------------------------------------------
	*
	* Interrupt Levels
	*-----------------------------------------------------------------------
	*/
	#define CFG_CPM_INTERRUPT 13 /* SIU_LEVEL6 */

	/*-----------------------------------------------------------------------
	* PCMCIA stuff
	*-----------------------------------------------------------------------
	*
	*/
	#define CFG_PCMCIA_MEM_ADDR (0x50000000)
	#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 )
	#define CFG_PCMCIA_DMA_ADDR (0x54000000)
	#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 )
	#define CFG_PCMCIA_ATTRB_ADDR (0x58000000)
	#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 )
	#define CFG_PCMCIA_IO_ADDR (0x5C000000)
	#define CFG_PCMCIA_IO_SIZE ( 64 << 20 )

	/*-----------------------------------------------------------------------
	* IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
	*-----------------------------------------------------------------------
	*/

	#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */

	#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
	#undef CONFIG_IDE_LED /* LED for ide not supported */
	#undef CONFIG_IDE_RESET /* reset for ide not supported */

	#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
	#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */

	#define CFG_ATA_IDE0_OFFSET 0x0000

	#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR

	/* Offset for data I/O */
	#define CFG_ATA_DATA_OFFSET (CFG_PCMCIA_MEM_SIZE + 0x320)

	/* Offset for normal register accesses */
	#define CFG_ATA_REG_OFFSET (2 * CFG_PCMCIA_MEM_SIZE + 0x320)

	/* Offset for alternate registers */
	#define CFG_ATA_ALT_OFFSET 0x0100

	/*-----------------------------------------------------------------------
	*
	*-----------------------------------------------------------------------
	*
	*/
	/#define CFG_DER 0x2002000F/
	#define CFG_DER 0

	/*
	* Init Memory Controller:
	*
	* BR0/1 and OR0/1 (FLASH) - second Flash bank optional
	*/

	#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
	#define FLASH_BASE1_PRELIM 0x41000000 /* FLASH bank #1 */

	/* used to re-map FLASH:
	* restrict access enough to keep SRAM working (if any)
	* but not too much to meddle with FLASH accesses
	*/
	#define CFG_REMAP_OR_AM 0xFF000000 /* OR addr mask */
	#define CFG_PRELIM_OR_AM 0xFF000000 /* OR addr mask */

	/* FLASH timing: ACS = 00, TRLX = 0, CSNT = 1, SCY = 8, EHTR = 0 */
	#define CFG_OR_TIMING_FLASH (OR_SCY_8_CLK)

	#define CFG_OR0_REMAP ( CFG_REMAP_OR_AM \| OR_CSNT_SAM \| OR_ACS_DIV1 \| OR_BI \| \
	CFG_OR_TIMING_FLASH)
	#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM \| OR_ACS_DIV1 \| OR_BI \| \
	CFG_OR_TIMING_FLASH)
	/* 16 bit, bank valid */
	#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) \| BR_PS_32 \| BR_V )

	#define CFG_OR1_REMAP CFG_OR0_REMAP
	#define CFG_OR1_PRELIM CFG_OR0_PRELIM
	#define CFG_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) \| BR_PS_32 \| BR_V )

	/*
	* BR3/OR3: SDRAM
	*
	* Multiplexed addresses, GPL5 output to GPL5_A (don't care)
	*/
	#define SDRAM_BASE3_PRELIM 0x00000000 /* SDRAM bank */
	#define SDRAM_PRELIM_OR_AM 0xF0000000 /* map 256 MB (>SDRAM_MAX_SIZE!) */
	#define SDRAM_TIMING OR_SCY_0_CLK /* SDRAM-Timing */

	#define SDRAM_MAX_SIZE 0x08000000 /* max 128 MB SDRAM */

	#define CFG_OR3_PRELIM (SDRAM_PRELIM_OR_AM \| OR_CSNT_SAM \| OR_G5LS \| SDRAM_TIMING )
	#define CFG_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) \| BR_MS_UPMA \| BR_V )

	/*
	* BR5/OR5: Touch Panel
	*
	* AM=0xFFC00 ATM=0 CSNT/SAM=0 ACS/G5LA/G5LS=3 BIH=1 SCY=0 SETA=0 TRLX=0 EHTR=0
	*/
	#define TOUCHPNL_BASE 0x20000000
	#define TOUCHPNL_OR_AM 0xFFFF8000
	#define TOUCHPNL_TIMING OR_SCY_0_CLK

	#define CFG_OR5_PRELIM (TOUCHPNL_OR_AM \| OR_CSNT_SAM \| OR_ACS_DIV1 \| OR_BI \| \
	TOUCHPNL_TIMING )
	#define CFG_BR5_PRELIM ((TOUCHPNL_BASE & BR_BA_MSK) \| BR_PS_32 \| BR_V )

	#define CFG_MEMORY_75
	#undef CFG_MEMORY_7E
	#undef CFG_MEMORY_8E

	/*
	* Memory Periodic Timer Prescaler
	*/

	/* periodic timer for refresh */
	#define CFG_MPTPR 0x200

	/*
	* MAMR settings for SDRAM
	*/

	#define CFG_MAMR_8COL 0x80802114
	#define CFG_MAMR_9COL 0x80904114

	/*
	* MAR setting for SDRAM
	*/
	#define CFG_MAR 0x00000088

	/*
	* Internal Definitions
	*
	* Boot Flags
	*/
	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	#define BOOTFLAG_WARM 0x02 /* Software reboot */

	#endif /* __CONFIG_H */