| /* |
| * (C) Copyright 2002 |
| * Daniel Engström, Omicron Ceti AB, daniel@omicron.se |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <pci.h> |
| #include <asm/io.h> |
| #include <asm/pci.h> |
| |
| #ifdef CONFIG_PCI |
| #undef PCI_ROM_SCAN_VERBOSE |
| |
| int pci_shadow_rom(pci_dev_t dev, unsigned char *dest) |
| { |
| struct pci_controller *hose; |
| int res = -1; |
| int i; |
| |
| u32 rom_addr; |
| u32 addr_reg; |
| u32 size; |
| |
| u16 vendor; |
| u16 device; |
| u32 class_code; |
| |
| hose = pci_bus_to_hose(PCI_BUS(dev)); |
| #if 0 |
| printf("pci_shadow_rom() asked to shadow device %x to %x\n", |
| dev, (u32)dest); |
| #endif |
| pci_read_config_word(dev, PCI_VENDOR_ID, &vendor); |
| pci_read_config_word(dev, PCI_DEVICE_ID, &device); |
| pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_code); |
| |
| class_code &= 0xffffff00; |
| class_code >>= 8; |
| |
| #if 0 |
| printf("PCI Header Vendor %04x device %04x class %06x\n", |
| vendor, device, class_code); |
| #endif |
| /* Enable the rom addess decoder */ |
| pci_write_config_dword(dev, PCI_ROM_ADDRESS, PCI_ROM_ADDRESS_MASK); |
| pci_read_config_dword(dev, PCI_ROM_ADDRESS, &addr_reg); |
| |
| if (!addr_reg) { |
| /* register unimplemented */ |
| printf("pci_chadow_rom: device do not seem to have a rom\n"); |
| return -1; |
| } |
| |
| size = (~(addr_reg&PCI_ROM_ADDRESS_MASK))+1; |
| |
| #if 0 |
| printf("ROM is %d bytes\n", size); |
| #endif |
| rom_addr = pci_get_rom_window(hose, size); |
| #if 0 |
| printf("ROM mapped at %x \n", rom_addr); |
| #endif |
| pci_write_config_dword(dev, PCI_ROM_ADDRESS, |
| pci_phys_to_mem(dev, rom_addr) |
| |PCI_ROM_ADDRESS_ENABLE); |
| |
| |
| |
| for (i=rom_addr;i<rom_addr+size; i+=512) { |
| |
| |
| if (readw(i) == 0xaa55) { |
| u32 pci_data; |
| #ifdef PCI_ROM_SCAN_VERBOSE |
| printf("ROM signature found\n"); |
| #endif |
| pci_data = readw(0x18+i); |
| pci_data += i; |
| |
| if (0==memcmp((void*)pci_data, "PCIR", 4)) { |
| #ifdef PCI_ROM_SCAN_VERBOSE |
| printf("Fount PCI rom image at offset %d\n", i-rom_addr); |
| printf("Vendor %04x device %04x class %06x\n", |
| readw(pci_data+4), readw(pci_data+6), |
| readl(pci_data+0x0d)&0xffffff); |
| printf("%s\n", |
| (readw(pci_data+0x15) &0x80)? |
| "Last image":"More images follow"); |
| switch (readb(pci_data+0x14)) { |
| case 0: |
| printf("X86 code\n"); |
| break; |
| case 1: |
| printf("Openfirmware code\n"); |
| break; |
| case 2: |
| printf("PARISC code\n"); |
| break; |
| } |
| printf("Image size %d\n", readw(pci_data+0x10) * 512); |
| #endif |
| /* FixMe: I think we should compare the class code |
| * bytes as well but I have no reference on the |
| * exact order of these bytes in the PCI ROM header */ |
| if (readw(pci_data+4) == vendor && |
| readw(pci_data+6) == device && |
| /* (readl(pci_data+0x0d)&0xffffff) == class_code && */ |
| readb(pci_data+0x14) == 0 /* x86 code image */ ) { |
| #ifdef PCI_ROM_SCAN_VERBOSE |
| printf("Suitable ROM image found, copying\n"); |
| #endif |
| memmove(dest, (void*)rom_addr, readw(pci_data+0x10) * 512); |
| res = 0; |
| break; |
| |
| } |
| if (readw(pci_data+0x15) &0x80) { |
| break; |
| } |
| } |
| } |
| |
| } |
| |
| #ifdef PCI_ROM_SCAN_VERBOSE |
| if (res) { |
| printf("No suitable image found\n"); |
| } |
| #endif |
| /* disable PAR register and PCI device ROM address devocer */ |
| pci_remove_rom_window(hose, rom_addr); |
| |
| pci_write_config_dword(dev, PCI_ROM_ADDRESS, 0); |
| |
| return res; |
| } |
| |
| #endif |