| /** |
| * \file cmac.h |
| * |
| * \brief This file contains CMAC definitions and functions. |
| * |
| * The Cipher-based Message Authentication Code (CMAC) Mode for |
| * Authentication is defined in <em>RFC-4493: The AES-CMAC Algorithm</em>. |
| * It is supported with AES and DES. |
| */ |
| /* |
| * Copyright The Mbed TLS Contributors |
| * SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later |
| */ |
| |
| #ifndef MBEDTLS_CMAC_H |
| #define MBEDTLS_CMAC_H |
| #include "mbedtls/private_access.h" |
| |
| #include "mbedtls/build_info.h" |
| |
| #include "mbedtls/cipher.h" |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| #define MBEDTLS_AES_BLOCK_SIZE 16 |
| #define MBEDTLS_DES3_BLOCK_SIZE 8 |
| |
| /* We don't support Camellia or ARIA in this module */ |
| #if defined(MBEDTLS_AES_C) |
| #define MBEDTLS_CMAC_MAX_BLOCK_SIZE 16 /**< The longest block used by CMAC is that of AES. */ |
| #else |
| #define MBEDTLS_CMAC_MAX_BLOCK_SIZE 8 /**< The longest block used by CMAC is that of 3DES. */ |
| #endif |
| |
| #if !defined(MBEDTLS_DEPRECATED_REMOVED) |
| /** The longest block supported by the cipher module. |
| * |
| * \deprecated |
| * For the maximum block size of a cipher supported by the CMAC module, |
| * use #MBEDTLS_CMAC_MAX_BLOCK_SIZE. |
| * For the maximum block size of a cipher supported by the cipher module, |
| * use #MBEDTLS_MAX_BLOCK_LENGTH. |
| */ |
| /* Before Mbed TLS 3.5, this was the maximum block size supported by the CMAC |
| * module, so it didn't take Camellia or ARIA into account. Since the name |
| * of the macro doesn't even convey "CMAC", this was misleading. Now the size |
| * is sufficient for any cipher, but the name is defined in cmac.h for |
| * backward compatibility. */ |
| #define MBEDTLS_CIPHER_BLKSIZE_MAX MBEDTLS_MAX_BLOCK_LENGTH |
| #endif /* MBEDTLS_DEPRECATED_REMOVED */ |
| |
| #if !defined(MBEDTLS_CMAC_ALT) |
| |
| /** |
| * The CMAC context structure. |
| */ |
| struct mbedtls_cmac_context_t { |
| /** The internal state of the CMAC algorithm. */ |
| unsigned char MBEDTLS_PRIVATE(state)[MBEDTLS_CMAC_MAX_BLOCK_SIZE]; |
| |
| /** Unprocessed data - either data that was not block aligned and is still |
| * pending processing, or the final block. */ |
| unsigned char MBEDTLS_PRIVATE(unprocessed_block)[MBEDTLS_CMAC_MAX_BLOCK_SIZE]; |
| |
| /** The length of data pending processing. */ |
| size_t MBEDTLS_PRIVATE(unprocessed_len); |
| }; |
| |
| #else /* !MBEDTLS_CMAC_ALT */ |
| #include "cmac_alt.h" |
| #endif /* !MBEDTLS_CMAC_ALT */ |
| |
| /** |
| * \brief This function starts a new CMAC computation |
| * by setting the CMAC key, and preparing to authenticate |
| * the input data. |
| * It must be called with an initialized cipher context. |
| * |
| * Once this function has completed, data can be supplied |
| * to the CMAC computation by calling |
| * mbedtls_cipher_cmac_update(). |
| * |
| * To start a CMAC computation using the same key as a previous |
| * CMAC computation, use mbedtls_cipher_cmac_finish(). |
| * |
| * \note When the CMAC implementation is supplied by an alternate |
| * implementation (through #MBEDTLS_CMAC_ALT), some ciphers |
| * may not be supported by that implementation, and thus |
| * return an error. Alternate implementations must support |
| * AES-128 and AES-256, and may support AES-192 and 3DES. |
| * |
| * \param ctx The cipher context used for the CMAC operation, initialized |
| * as one of the following types: MBEDTLS_CIPHER_AES_128_ECB, |
| * MBEDTLS_CIPHER_AES_192_ECB, MBEDTLS_CIPHER_AES_256_ECB, |
| * or MBEDTLS_CIPHER_DES_EDE3_ECB. |
| * \param key The CMAC key. |
| * \param keybits The length of the CMAC key in bits. |
| * Must be supported by the cipher. |
| * |
| * \return \c 0 on success. |
| * \return A cipher-specific error code on failure. |
| */ |
| int mbedtls_cipher_cmac_starts(mbedtls_cipher_context_t *ctx, |
| const unsigned char *key, size_t keybits); |
| |
| /** |
| * \brief This function feeds an input buffer into an ongoing CMAC |
| * computation. |
| * |
| * The CMAC computation must have previously been started |
| * by calling mbedtls_cipher_cmac_starts() or |
| * mbedtls_cipher_cmac_reset(). |
| * |
| * Call this function as many times as needed to input the |
| * data to be authenticated. |
| * Once all of the required data has been input, |
| * call mbedtls_cipher_cmac_finish() to obtain the result |
| * of the CMAC operation. |
| * |
| * \param ctx The cipher context used for the CMAC operation. |
| * \param input The buffer holding the input data. |
| * \param ilen The length of the input data. |
| * |
| * \return \c 0 on success. |
| * \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA |
| * if parameter verification fails. |
| */ |
| int mbedtls_cipher_cmac_update(mbedtls_cipher_context_t *ctx, |
| const unsigned char *input, size_t ilen); |
| |
| /** |
| * \brief This function finishes an ongoing CMAC operation, and |
| * writes the result to the output buffer. |
| * |
| * It should be followed either by |
| * mbedtls_cipher_cmac_reset(), which starts another CMAC |
| * operation with the same key, or mbedtls_cipher_free(), |
| * which clears the cipher context. |
| * |
| * \param ctx The cipher context used for the CMAC operation. |
| * \param output The output buffer for the CMAC checksum result. |
| * |
| * \return \c 0 on success. |
| * \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA |
| * if parameter verification fails. |
| */ |
| int mbedtls_cipher_cmac_finish(mbedtls_cipher_context_t *ctx, |
| unsigned char *output); |
| |
| /** |
| * \brief This function starts a new CMAC operation with the same |
| * key as the previous one. |
| * |
| * It should be called after finishing the previous CMAC |
| * operation with mbedtls_cipher_cmac_finish(). |
| * After calling this function, |
| * call mbedtls_cipher_cmac_update() to supply the new |
| * CMAC operation with data. |
| * |
| * \param ctx The cipher context used for the CMAC operation. |
| * |
| * \return \c 0 on success. |
| * \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA |
| * if parameter verification fails. |
| */ |
| int mbedtls_cipher_cmac_reset(mbedtls_cipher_context_t *ctx); |
| |
| /** |
| * \brief This function calculates the full generic CMAC |
| * on the input buffer with the provided key. |
| * |
| * The function allocates the context, performs the |
| * calculation, and frees the context. |
| * |
| * The CMAC result is calculated as |
| * output = generic CMAC(cmac key, input buffer). |
| * |
| * \note When the CMAC implementation is supplied by an alternate |
| * implementation (through #MBEDTLS_CMAC_ALT), some ciphers |
| * may not be supported by that implementation, and thus |
| * return an error. Alternate implementations must support |
| * AES-128 and AES-256, and may support AES-192 and 3DES. |
| * |
| * \param cipher_info The cipher information. |
| * \param key The CMAC key. |
| * \param keylen The length of the CMAC key in bits. |
| * \param input The buffer holding the input data. |
| * \param ilen The length of the input data. |
| * \param output The buffer for the generic CMAC result. |
| * |
| * \return \c 0 on success. |
| * \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA |
| * if parameter verification fails. |
| */ |
| int mbedtls_cipher_cmac(const mbedtls_cipher_info_t *cipher_info, |
| const unsigned char *key, size_t keylen, |
| const unsigned char *input, size_t ilen, |
| unsigned char *output); |
| |
| #if defined(MBEDTLS_AES_C) |
| /** |
| * \brief This function implements the AES-CMAC-PRF-128 pseudorandom |
| * function, as defined in |
| * <em>RFC-4615: The Advanced Encryption Standard-Cipher-based |
| * Message Authentication Code-Pseudo-Random Function-128 |
| * (AES-CMAC-PRF-128) Algorithm for the Internet Key |
| * Exchange Protocol (IKE).</em> |
| * |
| * \param key The key to use. |
| * \param key_len The key length in Bytes. |
| * \param input The buffer holding the input data. |
| * \param in_len The length of the input data in Bytes. |
| * \param output The buffer holding the generated 16 Bytes of |
| * pseudorandom output. |
| * |
| * \return \c 0 on success. |
| */ |
| int mbedtls_aes_cmac_prf_128(const unsigned char *key, size_t key_len, |
| const unsigned char *input, size_t in_len, |
| unsigned char output[16]); |
| #endif /* MBEDTLS_AES_C */ |
| |
| #if defined(MBEDTLS_SELF_TEST) && (defined(MBEDTLS_AES_C) || defined(MBEDTLS_DES_C)) |
| /** |
| * \brief The CMAC checkup routine. |
| * |
| * \note In case the CMAC routines are provided by an alternative |
| * implementation (i.e. #MBEDTLS_CMAC_ALT is defined), the |
| * checkup routine will succeed even if the implementation does |
| * not support the less widely used AES-192 or 3DES primitives. |
| * The self-test requires at least AES-128 and AES-256 to be |
| * supported by the underlying implementation. |
| * |
| * \return \c 0 on success. |
| * \return \c 1 on failure. |
| */ |
| int mbedtls_cmac_self_test(int verbose); |
| #endif /* MBEDTLS_SELF_TEST && ( MBEDTLS_AES_C || MBEDTLS_DES_C ) */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* MBEDTLS_CMAC_H */ |