| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved. |
| */ |
| |
| #include <common.h> |
| #include <errno.h> |
| |
| #include <asm/io.h> |
| #include <asm/types.h> |
| #include <asm/arch/flow.h> |
| #include <asm/arch/powergate.h> |
| #include <asm/arch/tegra.h> |
| |
| #define PWRGATE_TOGGLE 0x30 |
| #define PWRGATE_TOGGLE_START (1 << 8) |
| |
| #define REMOVE_CLAMPING 0x34 |
| |
| #define PWRGATE_STATUS 0x38 |
| |
| static int tegra_powergate_set(enum tegra_powergate id, bool state) |
| { |
| u32 value, mask = state ? (1 << id) : 0, old_mask; |
| unsigned long start, timeout = 25; |
| |
| value = readl(NV_PA_PMC_BASE + PWRGATE_STATUS); |
| old_mask = value & (1 << id); |
| |
| if (mask == old_mask) |
| return 0; |
| |
| writel(PWRGATE_TOGGLE_START | id, NV_PA_PMC_BASE + PWRGATE_TOGGLE); |
| |
| start = get_timer(0); |
| |
| while (get_timer(start) < timeout) { |
| value = readl(NV_PA_PMC_BASE + PWRGATE_STATUS); |
| if ((value & (1 << id)) == mask) |
| return 0; |
| } |
| |
| return -ETIMEDOUT; |
| } |
| |
| int tegra_powergate_power_on(enum tegra_powergate id) |
| { |
| return tegra_powergate_set(id, true); |
| } |
| |
| int tegra_powergate_power_off(enum tegra_powergate id) |
| { |
| return tegra_powergate_set(id, false); |
| } |
| |
| static int tegra_powergate_remove_clamping(enum tegra_powergate id) |
| { |
| unsigned long value; |
| |
| /* |
| * The REMOVE_CLAMPING register has the bits for the PCIE and VDEC |
| * partitions reversed. This was originally introduced on Tegra20 but |
| * has since been carried forward for backwards-compatibility. |
| */ |
| if (id == TEGRA_POWERGATE_VDEC) |
| value = 1 << TEGRA_POWERGATE_PCIE; |
| else if (id == TEGRA_POWERGATE_PCIE) |
| value = 1 << TEGRA_POWERGATE_VDEC; |
| else |
| value = 1 << id; |
| |
| writel(value, NV_PA_PMC_BASE + REMOVE_CLAMPING); |
| |
| return 0; |
| } |
| |
| static void tegra_powergate_ram_repair(void) |
| { |
| #ifdef CONFIG_TEGRA124 |
| struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE; |
| |
| /* Request RAM repair for cluster 0 and wait until complete */ |
| setbits_le32(&flow->ram_repair, RAM_REPAIR_REQ); |
| while (!(readl(&flow->ram_repair) & RAM_REPAIR_STS)) |
| ; |
| |
| /* Same for cluster 1 */ |
| setbits_le32(&flow->ram_repair_cluster1, RAM_REPAIR_REQ); |
| while (!(readl(&flow->ram_repair_cluster1) & RAM_REPAIR_STS)) |
| ; |
| #endif |
| } |
| |
| int tegra_powergate_sequence_power_up(enum tegra_powergate id, |
| enum periph_id periph) |
| { |
| int err; |
| |
| tegra_powergate_ram_repair(); |
| reset_set_enable(periph, 1); |
| |
| err = tegra_powergate_power_on(id); |
| if (err < 0) |
| return err; |
| |
| clock_enable(periph); |
| |
| udelay(10); |
| |
| err = tegra_powergate_remove_clamping(id); |
| if (err < 0) |
| return err; |
| |
| udelay(10); |
| |
| reset_set_enable(periph, 0); |
| |
| return 0; |
| } |