| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com> |
| */ |
| |
| #include <dt-bindings/clock/bcm6368-clock.h> |
| #include <dt-bindings/dma/bcm6368-dma.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/reset/bcm6368-reset.h> |
| #include "skeleton.dtsi" |
| |
| / { |
| compatible = "brcm,bcm6368"; |
| |
| aliases { |
| spi0 = &spi; |
| }; |
| |
| cpus { |
| reg = <0x10000000 0x4>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| u-boot,dm-pre-reloc; |
| |
| cpu@0 { |
| compatible = "brcm,bcm6368-cpu", "mips,mips4Kc"; |
| device_type = "cpu"; |
| reg = <0>; |
| u-boot,dm-pre-reloc; |
| }; |
| |
| cpu@1 { |
| compatible = "brcm,bcm6368-cpu", "mips,mips4Kc"; |
| device_type = "cpu"; |
| reg = <1>; |
| u-boot,dm-pre-reloc; |
| }; |
| }; |
| |
| clocks { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| u-boot,dm-pre-reloc; |
| |
| periph_osc: periph-osc { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <50000000>; |
| u-boot,dm-pre-reloc; |
| }; |
| |
| periph_clk: periph-clk { |
| compatible = "brcm,bcm6345-clk"; |
| reg = <0x10000004 0x4>; |
| #clock-cells = <1>; |
| }; |
| }; |
| |
| pflash: nor@18000000 { |
| compatible = "cfi-flash"; |
| reg = <0x18000000 0x2000000>; |
| bank-width = <2>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| status = "disabled"; |
| }; |
| |
| ubus { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| u-boot,dm-pre-reloc; |
| |
| pll_cntl: syscon@10000008 { |
| compatible = "syscon"; |
| reg = <0x10000008 0x4>; |
| }; |
| |
| syscon-reboot { |
| compatible = "syscon-reboot"; |
| regmap = <&pll_cntl>; |
| offset = <0x0>; |
| mask = <0x1>; |
| }; |
| |
| periph_rst: reset-controller@10000010 { |
| compatible = "brcm,bcm6345-reset"; |
| reg = <0x10000010 0x4>; |
| #reset-cells = <1>; |
| }; |
| |
| wdt: watchdog@1000005c { |
| compatible = "brcm,bcm6345-wdt"; |
| reg = <0x1000005c 0xc>; |
| clocks = <&periph_osc>; |
| }; |
| |
| wdt-reboot { |
| compatible = "wdt-reboot"; |
| wdt = <&wdt>; |
| }; |
| |
| gpio1: gpio-controller@10000080 { |
| compatible = "brcm,bcm6345-gpio"; |
| reg = <0x10000080 0x4>, <0x10000088 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <6>; |
| |
| status = "disabled"; |
| }; |
| |
| gpio0: gpio-controller@10000084 { |
| compatible = "brcm,bcm6345-gpio"; |
| reg = <0x10000084 0x4>, <0x1000008c 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| status = "disabled"; |
| }; |
| |
| leds: led-controller@100000d0 { |
| compatible = "brcm,bcm6358-leds"; |
| reg = <0x100000d0 0x8>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| uart0: serial@10000100 { |
| compatible = "brcm,bcm6345-uart"; |
| reg = <0x10000100 0x18>; |
| clocks = <&periph_osc>; |
| |
| status = "disabled"; |
| }; |
| |
| uart1: serial@10000120 { |
| compatible = "brcm,bcm6345-uart"; |
| reg = <0x10000120 0x18>; |
| clocks = <&periph_osc>; |
| |
| status = "disabled"; |
| }; |
| |
| spi: spi@10000800 { |
| compatible = "brcm,bcm6358-spi"; |
| reg = <0x10000800 0x70c>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&periph_clk BCM6368_CLK_SPI>; |
| resets = <&periph_rst BCM6368_RST_SPI>; |
| spi-max-frequency = <20000000>; |
| num-cs = <6>; |
| |
| status = "disabled"; |
| }; |
| |
| memory-controller@10001200 { |
| compatible = "brcm,bcm6358-mc"; |
| reg = <0x10001200 0x4c>; |
| u-boot,dm-pre-reloc; |
| }; |
| |
| ehci: usb-controller@10001500 { |
| compatible = "brcm,bcm6368-ehci", "generic-ehci"; |
| reg = <0x10001500 0x100>; |
| phys = <&usbh>; |
| big-endian; |
| |
| status = "disabled"; |
| }; |
| |
| ohci: usb-controller@10001600 { |
| compatible = "brcm,bcm6368-ohci", "generic-ohci"; |
| reg = <0x10001600 0x100>; |
| phys = <&usbh>; |
| big-endian; |
| |
| status = "disabled"; |
| }; |
| |
| usbh: usb-phy@10001700 { |
| compatible = "brcm,bcm6368-usbh"; |
| reg = <0x10001700 0x38>; |
| #phy-cells = <0>; |
| clocks = <&periph_clk BCM6368_CLK_USBH>; |
| clock-names = "usbh"; |
| resets = <&periph_rst BCM6368_RST_USBH>; |
| |
| status = "disabled"; |
| }; |
| |
| iudma: dma-controller@10006800 { |
| compatible = "brcm,bcm6368-iudma"; |
| reg = <0x10006800 0x80>, |
| <0x10006a00 0x80>, |
| <0x10006c00 0x80>; |
| reg-names = "dma", |
| "dma-channels", |
| "dma-sram"; |
| #dma-cells = <1>; |
| dma-channels = <8>; |
| }; |
| }; |
| }; |