arch/arm/mach-stm32mp/bsec.c - platform/external/u-boot - Gitiles

 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
  */

 #define LOG_CATEGORY UCLASS_MISC

 #include <common.h>
 #include <clk.h>
 #include <dm.h>
 #include <log.h>
 #include <misc.h>
 #include <tee.h>
 #include <asm/io.h>
 #include <asm/arch/bsec.h>
 #include <asm/arch/stm32mp1_smc.h>
 #include <dm/device.h>
 #include <dm/device_compat.h>
 #include <linux/arm-smccc.h>
 #include <linux/iopoll.h>
 #include <linux/printk.h>

 #define BSEC_OTP_MAX_VALUE		95
 #define BSEC_OTP_UPPER_START		32
 #define BSEC_TIMEOUT_US			10000

 /* BSEC REGISTER OFFSET (base relative) */
 #define BSEC_OTP_CONF_OFF		0x000
 #define BSEC_OTP_CTRL_OFF		0x004
 #define BSEC_OTP_WRDATA_OFF		0x008
 #define BSEC_OTP_STATUS_OFF		0x00C
 #define BSEC_OTP_LOCK_OFF		0x010
 #define BSEC_DENABLE_OFF		0x014
 #define BSEC_DISTURBED_OFF		0x01C
 #define BSEC_ERROR_OFF			0x034
 #define BSEC_WRLOCK_OFF			0x04C /* OTP write permananet lock */
 #define BSEC_SPLOCK_OFF			0x064 /* OTP write sticky lock */
 #define BSEC_SWLOCK_OFF			0x07C /* shadow write sticky lock */
 #define BSEC_SRLOCK_OFF			0x094 /* shadow read sticky lock */
 #define BSEC_OTP_DATA_OFF		0x200

 /* BSEC_CONFIGURATION Register MASK */
 #define BSEC_CONF_POWER_UP		0x001

 /* BSEC_CONTROL Register */
 #define BSEC_READ			0x000
 #define BSEC_WRITE			0x100
 #define BSEC_LOCK			0x200

 /* LOCK Register */
 #define OTP_LOCK_MASK			0x1F
 #define OTP_LOCK_BANK_SHIFT		0x05
 #define OTP_LOCK_BIT_MASK		0x01

 /* STATUS Register */
 #define BSEC_MODE_BUSY_MASK		0x08
 #define BSEC_MODE_PROGFAIL_MASK		0x10
 #define BSEC_MODE_PWR_MASK		0x20

 /* DENABLE Register */
 #define BSEC_DENABLE_DBGSWENABLE	BIT(10)

 /*
  * OTP Lock services definition
  * Value must corresponding to the bit number in the register
  */
 #define BSEC_LOCK_PROGRAM		0x04

 #define PTA_BSEC_UUID { 0x94cf71ad, 0x80e6, 0x40b5, \
 	{ 0xa7, 0xc6, 0x3d, 0xc5, 0x01, 0xeb, 0x28, 0x03 } }

 /*
  * Read OTP memory
  *
  * [in]		value[0].a		OTP start offset in byte
  * [in]		value[0].b		Access type (0:shadow, 1:fuse, 2:lock)
  * [out]	memref[1].buffer	Output buffer to store read values
  * [out]	memref[1].size		Size of OTP to be read
  *
  * Return codes:
  * TEE_SUCCESS - Invoke command success
  * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
  * TEE_ERROR_ACCESS_DENIED - OTP not accessible by caller
  */
 #define PTA_BSEC_READ_MEM		0x0

 /*
  * Write OTP memory
  *
  * [in]		value[0].a		OTP start offset in byte
  * [in]		value[0].b		Access type (0:shadow, 1:fuse, 2:lock)
  * [in]		memref[1].buffer	Input buffer to read values
  * [in]		memref[1].size		Size of OTP to be written
  *
  * Return codes:
  * TEE_SUCCESS - Invoke command success
  * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
  * TEE_ERROR_ACCESS_DENIED - OTP not accessible by caller
  */
 #define PTA_BSEC_WRITE_MEM		0x1

 /* value of PTA_BSEC access type = value[in] b */
 #define SHADOW_ACCESS			0
 #define FUSE_ACCESS			1
 #define LOCK_ACCESS			2

 /**
  * bsec_lock() - manage lock for each type SR/SP/SW
  * @address: address of bsec IP register
  * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
  * Return: true if locked else false
  */
 static bool bsec_read_lock(void __iomem *address, u32 otp)
 {
 	u32 bit;
 	u32 bank;

 	bit = 1 << (otp & OTP_LOCK_MASK);
 	bank = ((otp >> OTP_LOCK_BANK_SHIFT) & OTP_LOCK_MASK) * sizeof(u32);

 	return !!(readl((address + bank)) & bit);
 }

 /**
  * bsec_check_error() - Check status of one otp
  * @base: base address of bsec IP
  * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
  * Return: 0 if no error, -EAGAIN or -ENOTSUPP
  */
 static u32 bsec_check_error(void __iomem *base, u32 otp)
 {
 	u32 bit;
 	u32 bank;

 	bit = 1 << (otp & OTP_LOCK_MASK);
 	bank = ((otp >> OTP_LOCK_BANK_SHIFT) & OTP_LOCK_MASK) * sizeof(u32);

 	if (readl(base + BSEC_DISTURBED_OFF + bank) & bit)
 		return -EAGAIN;
 	else if (readl(base + BSEC_ERROR_OFF + bank) & bit)
 		return -ENOTSUPP;

 	return 0;
 }

 /**
  * bsec_read_SR_lock() - read SR lock (Shadowing)
  * @base: base address of bsec IP
  * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
  * Return: true if locked else false
  */
 static bool bsec_read_SR_lock(void __iomem *base, u32 otp)
 {
 	return bsec_read_lock(base + BSEC_SRLOCK_OFF, otp);
 }

 /**
  * bsec_read_SP_lock() - read SP lock (program Lock)
  * @base: base address of bsec IP
  * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
  * Return: true if locked else false
  */
 static bool bsec_read_SP_lock(void __iomem *base, u32 otp)
 {
 	return bsec_read_lock(base + BSEC_SPLOCK_OFF, otp);
 }

 /**
  * bsec_SW_lock() - manage SW lock (Write in Shadow)
  * @base: base address of bsec IP
  * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
  * Return: true if locked else false
  */
 static bool bsec_read_SW_lock(void __iomem *base, u32 otp)
 {
 	return bsec_read_lock(base + BSEC_SWLOCK_OFF, otp);
 }

 /**
  * bsec_power_safmem() - Activate or deactivate safmem power
  * @base: base address of bsec IP
  * @power: true to power up , false to power down
  * Return: 0 if succeed
  */
 static int bsec_power_safmem(void __iomem *base, bool power)
 {
 	u32 val;
 	u32 mask;

 	if (power) {
 		setbits_le32(base + BSEC_OTP_CONF_OFF, BSEC_CONF_POWER_UP);
 		mask = BSEC_MODE_PWR_MASK;
 	} else {
 		clrbits_le32(base + BSEC_OTP_CONF_OFF, BSEC_CONF_POWER_UP);
 		mask = 0;
 	}

 	/* waiting loop */
 	return readl_poll_timeout(base + BSEC_OTP_STATUS_OFF,
 				  val, (val & BSEC_MODE_PWR_MASK) == mask,
 				  BSEC_TIMEOUT_US);
 }

 /**
  * bsec_shadow_register() - copy safmen otp to bsec data
  * @dev: bsec IP device
  * @base: base address of bsec IP
  * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
  * Return: 0 if no error
  */
 static int bsec_shadow_register(struct udevice *dev, void __iomem *base, u32 otp)
 {
 	u32 val;
 	int ret;
 	bool power_up = false;

 	/* check if shadowing of otp is locked */
 	if (bsec_read_SR_lock(base, otp))
 		dev_dbg(dev, "OTP %d is locked and refreshed with 0\n",
 			otp);

 	/* check if safemem is power up */
 	val = readl(base + BSEC_OTP_STATUS_OFF);
 	if (!(val & BSEC_MODE_PWR_MASK)) {
 		ret = bsec_power_safmem(base, true);
 		if (ret)
 			return ret;
 		power_up = true;
 	}
 	/* set BSEC_OTP_CTRL_OFF with the otp value*/
 	writel(otp | BSEC_READ, base + BSEC_OTP_CTRL_OFF);

 	/* check otp status*/
 	ret = readl_poll_timeout(base + BSEC_OTP_STATUS_OFF,
 				 val, (val & BSEC_MODE_BUSY_MASK) == 0,
 				 BSEC_TIMEOUT_US);
 	if (ret)
 		return ret;

 	ret = bsec_check_error(base, otp);

 	if (power_up)
 		bsec_power_safmem(base, false);

 	return ret;
 }

 /**
  * bsec_read_shadow() - read an otp data value from shadow
  * @dev: bsec IP device
  * @base: base address of bsec IP
  * @val: read value
  * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
  * Return: 0 if no error
  */
 static int bsec_read_shadow(struct udevice *dev, void __iomem *base, u32 *val,
 			    u32 otp)
 {
 	*val = readl(base + BSEC_OTP_DATA_OFF + otp * sizeof(u32));

 	return bsec_check_error(base, otp);
 }

 /**
  * bsec_write_shadow() - write value in BSEC data register in shadow
  * @dev: bsec IP device
  * @base: base address of bsec IP
  * @val: value to write
  * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
  * Return: 0 if no error
  */
 static int bsec_write_shadow(struct udevice *dev, void __iomem *base, u32 val, u32 otp)
 {
 	/* check if programming of otp is locked */
 	if (bsec_read_SW_lock(base, otp))
 		dev_dbg(dev, "OTP %d is lock, write will be ignore\n", otp);

 	writel(val, base + BSEC_OTP_DATA_OFF + otp * sizeof(u32));

 	return bsec_check_error(base, otp);
 }

 /**
  * bsec_program_otp() - program a bit in SAFMEM
  * @dev: bsec IP device
  * @base: base address of bsec IP
  * @val: value to program
  * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
  * after the function the otp data is not refreshed in shadow
  * Return: 0 if no error
  */
 static int bsec_program_otp(struct udevice *dev, void __iomem *base, u32 val, u32 otp)
 {
 	u32 ret;
 	bool power_up = false;

 	if (bsec_read_SP_lock(base, otp))
 		dev_dbg(dev, "OTP %d locked, prog will be ignore\n", otp);

 	if (readl(base + BSEC_OTP_LOCK_OFF) & (1 << BSEC_LOCK_PROGRAM))
 		dev_dbg(dev, "Global lock, prog will be ignore\n");

 	/* check if safemem is power up */
 	if (!(readl(base + BSEC_OTP_STATUS_OFF) & BSEC_MODE_PWR_MASK)) {
 		ret = bsec_power_safmem(base, true);
 		if (ret)
 			return ret;

 		power_up = true;
 	}
 	/* set value in write register*/
 	writel(val, base + BSEC_OTP_WRDATA_OFF);

 	/* set BSEC_OTP_CTRL_OFF with the otp value */
 	writel(otp | BSEC_WRITE, base + BSEC_OTP_CTRL_OFF);

 	/* check otp status*/
 	ret = readl_poll_timeout(base + BSEC_OTP_STATUS_OFF,
 				 val, (val & BSEC_MODE_BUSY_MASK) == 0,
 				 BSEC_TIMEOUT_US);
 	if (ret)
 		return ret;

 	if (val & BSEC_MODE_PROGFAIL_MASK)
 		ret = -EACCES;
 	else
 		ret = bsec_check_error(base, otp);

 	if (power_up)
 		bsec_power_safmem(base, false);

 	return ret;
 }

 /**
  * bsec_permanent_lock_otp() - permanent lock of OTP in SAFMEM
  * @dev: bsec IP device
  * @base: base address of bsec IP
  * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
  * Return: 0 if no error
  */
 static int bsec_permanent_lock_otp(struct udevice *dev, void __iomem *base, uint32_t otp)
 {
 	int ret;
 	bool power_up = false;
 	u32 val, addr;

 	/* check if safemem is power up */
 	if (!(readl(base + BSEC_OTP_STATUS_OFF) & BSEC_MODE_PWR_MASK)) {
 		ret = bsec_power_safmem(base, true);
 		if (ret)
 			return ret;

 		power_up = true;
 	}

 	/*
 	 * low OTPs = 2 bits word for low OTPs, 1 bits per word for upper OTP
 	 * and only 16 bits used in WRDATA
 	 */
 	if (otp < BSEC_OTP_UPPER_START) {
 		addr = otp / 8;
 		val = 0x03 << ((otp * 2) & 0xF);
 	} else {
 		addr = BSEC_OTP_UPPER_START / 8 +
 		       ((otp - BSEC_OTP_UPPER_START) / 16);
 		val = 0x01 << (otp & 0xF);
 	}

 	/* set value in write register*/
 	writel(val, base + BSEC_OTP_WRDATA_OFF);

 	/* set BSEC_OTP_CTRL_OFF with the otp addr and lock request*/
 	writel(addr | BSEC_WRITE | BSEC_LOCK, base + BSEC_OTP_CTRL_OFF);

 	/* check otp status*/
 	ret = readl_poll_timeout(base + BSEC_OTP_STATUS_OFF,
 				 val, (val & BSEC_MODE_BUSY_MASK) == 0,
 				 BSEC_TIMEOUT_US);
 	if (ret)
 		return ret;

 	if (val & BSEC_MODE_PROGFAIL_MASK)
 		ret = -EACCES;
 	else
 		ret = bsec_check_error(base, otp);

 	if (power_up)
 		bsec_power_safmem(base, false);

 	return ret;
 }

 /* BSEC MISC driver *******************************************************/
 struct stm32mp_bsec_plat {
 	void __iomem *base;
 };

 struct stm32mp_bsec_priv {
 	struct udevice *tee;
 };

 static int stm32mp_bsec_read_otp(struct udevice *dev, u32 *val, u32 otp)
 {
 	struct stm32mp_bsec_plat *plat;
 	u32 tmp_data = 0;
 	int ret;

 	if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_SPL_BUILD))
 		return stm32_smc(STM32_SMC_BSEC,
 				 STM32_SMC_READ_OTP,
 				 otp, 0, val);

 	plat = dev_get_plat(dev);

 	/* read current shadow value */
 	ret = bsec_read_shadow(dev, plat->base, &tmp_data, otp);
 	if (ret)
 		return ret;

 	/* copy otp in shadow */
 	ret = bsec_shadow_register(dev, plat->base, otp);
 	if (ret)
 		return ret;

 	ret = bsec_read_shadow(dev, plat->base, val, otp);
 	if (ret)
 		return ret;

 	/* restore shadow value */
 	ret = bsec_write_shadow(dev, plat->base, tmp_data, otp);

 	return ret;
 }

 static int stm32mp_bsec_read_shadow(struct udevice *dev, u32 *val, u32 otp)
 {
 	struct stm32mp_bsec_plat *plat;

 	if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_SPL_BUILD))
 		return stm32_smc(STM32_SMC_BSEC,
 				 STM32_SMC_READ_SHADOW,
 				 otp, 0, val);

 	plat = dev_get_plat(dev);

 	return bsec_read_shadow(dev, plat->base, val, otp);
 }

 static int stm32mp_bsec_read_lock(struct udevice *dev, u32 *val, u32 otp)
 {
 	struct stm32mp_bsec_plat *plat = dev_get_plat(dev);
 	u32 wrlock;

 	/* return OTP permanent write lock status */
 	wrlock = bsec_read_lock(plat->base + BSEC_WRLOCK_OFF, otp);

 	*val = 0;
 	if (wrlock)
 		*val = BSEC_LOCK_PERM;

 	return 0;
 }

 static int stm32mp_bsec_write_otp(struct udevice *dev, u32 val, u32 otp)
 {
 	struct stm32mp_bsec_plat *plat;

 	if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_SPL_BUILD))
 		return stm32_smc_exec(STM32_SMC_BSEC,
 				      STM32_SMC_PROG_OTP,
 				      otp, val);

 	plat = dev_get_plat(dev);

 	return bsec_program_otp(dev, plat->base, val, otp);

 }

 static int stm32mp_bsec_write_shadow(struct udevice *dev, u32 val, u32 otp)
 {
 	struct stm32mp_bsec_plat *plat;

 	if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_SPL_BUILD))
 		return stm32_smc_exec(STM32_SMC_BSEC,
 				      STM32_SMC_WRITE_SHADOW,
 				      otp, val);

 	plat = dev_get_plat(dev);

 	return bsec_write_shadow(dev, plat->base, val, otp);
 }

 static int stm32mp_bsec_write_lock(struct udevice *dev, u32 val, u32 otp)
 {
 	struct stm32mp_bsec_plat *plat;

 	/* only permanent write lock is supported in U-Boot */
 	if (!(val & BSEC_LOCK_PERM)) {
 		dev_dbg(dev, "lock option without BSEC_LOCK_PERM: %x\n", val);
 		return 0; /* nothing to do */
 	}

 	if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_SPL_BUILD))
 		return stm32_smc_exec(STM32_SMC_BSEC,
 				      STM32_SMC_WRLOCK_OTP,
 				      otp, 0);

 	plat = dev_get_plat(dev);

 	return bsec_permanent_lock_otp(dev, plat->base, otp);
 }

 static int bsec_pta_open_session(struct udevice *tee, u32 *tee_session)
 {
 	const struct tee_optee_ta_uuid uuid = PTA_BSEC_UUID;
 	struct tee_open_session_arg arg;
 	int rc;

 	memset(&arg, 0, sizeof(arg));
 	tee_optee_ta_uuid_to_octets(arg.uuid, &uuid);
 	arg.clnt_login = TEE_LOGIN_REE_KERNEL;
 	rc = tee_open_session(tee, &arg, 0, NULL);
 	if (rc < 0)
 		return -ENODEV;

 	*tee_session = arg.session;

 	return 0;
 }

 static int bsec_optee_open(struct udevice *dev)
 {
 	struct stm32mp_bsec_priv *priv = dev_get_priv(dev);
 	struct udevice *tee;
 	u32 tee_session;
 	int rc;

 	tee = tee_find_device(NULL, NULL, NULL, NULL);
 	if (!tee)
 		return -ENODEV;

 	/* try to open the STM32 BSEC TA */
 	rc = bsec_pta_open_session(tee, &tee_session);
 	if (rc)
 		return rc;

 	tee_close_session(tee, tee_session);

 	priv->tee = tee;

 	return 0;
 }

 static int bsec_optee_pta(struct udevice *dev, int cmd, int type, int offset,
 			  void *buff, ulong size)
 {
 	struct stm32mp_bsec_priv *priv = dev_get_priv(dev);
 	u32 tee_session;
 	struct tee_invoke_arg arg;
 	struct tee_param param[2];
 	struct tee_shm *fw_shm;
 	int rc;

 	rc = bsec_pta_open_session(priv->tee, &tee_session);
 	if (rc)
 		return rc;

 	rc = tee_shm_register(priv->tee, buff, size, 0, &fw_shm);
 	if (rc)
 		goto close_session;

 	memset(&arg, 0, sizeof(arg));
 	arg.func = cmd;
 	arg.session = tee_session;

 	memset(param, 0, sizeof(param));

 	param[0].attr = TEE_PARAM_ATTR_TYPE_VALUE_INPUT;
 	param[0].u.value.a = offset;
 	param[0].u.value.b = type;

 	if (cmd == PTA_BSEC_WRITE_MEM)
 		param[1].attr = TEE_PARAM_ATTR_TYPE_MEMREF_INPUT;
 	else
 		param[1].attr = TEE_PARAM_ATTR_TYPE_MEMREF_OUTPUT;

 	param[1].u.memref.shm = fw_shm;
 	param[1].u.memref.size = size;

 	rc = tee_invoke_func(priv->tee, &arg, 2, param);
 	if (rc < 0 || arg.ret != 0) {
 		dev_err(priv->tee,
 			"PTA_BSEC invoke failed TEE err: %x, err:%x\n",
 			arg.ret, rc);
 		if (!rc)
 			rc = -EIO;
 	}

 	tee_shm_free(fw_shm);

 close_session:
 	tee_close_session(priv->tee, tee_session);

 	return rc;
 }

 static int stm32mp_bsec_read(struct udevice *dev, int offset,
 			     void *buf, int size)
 {
 	struct stm32mp_bsec_priv *priv = dev_get_priv(dev);
 	int ret;
 	int i;
 	bool shadow = true, lock = false;
 	int nb_otp = size / sizeof(u32);
 	int otp, cmd;
 	unsigned int offs = offset;

 	if (offs >= STM32_BSEC_LOCK_OFFSET) {
 		offs -= STM32_BSEC_LOCK_OFFSET;
 		lock = true;
 	} else if (offs >= STM32_BSEC_OTP_OFFSET) {
 		offs -= STM32_BSEC_OTP_OFFSET;
 		shadow = false;
 	}

 	if ((offs % 4) || (size % 4) || !size)
 		return -EINVAL;

 	if (IS_ENABLED(CONFIG_OPTEE) && priv->tee) {
 		cmd = FUSE_ACCESS;
 		if (shadow)
 			cmd = SHADOW_ACCESS;
 		if (lock)
 			cmd = LOCK_ACCESS;
 		ret = bsec_optee_pta(dev, PTA_BSEC_READ_MEM, cmd, offs, buf, size);
 		if (ret)
 			return ret;

 		return size;
 	}

 	otp = offs / sizeof(u32);

 	for (i = otp; i < (otp + nb_otp) && i <= BSEC_OTP_MAX_VALUE; i++) {
 		u32 *addr = &((u32 *)buf)[i - otp];

 		if (lock)
 			ret = stm32mp_bsec_read_lock(dev, addr, i);
 		else if (shadow)
 			ret = stm32mp_bsec_read_shadow(dev, addr, i);
 		else
 			ret = stm32mp_bsec_read_otp(dev, addr, i);

 		if (ret)
 			break;
 	}
 	if (ret)
 		return ret;
 	else
 		return (i - otp) * 4;
 }

 static int stm32mp_bsec_write(struct udevice *dev, int offset,
 			      const void *buf, int size)
 {
 	struct stm32mp_bsec_priv *priv = dev_get_priv(dev);
 	int ret = 0;
 	int i;
 	bool shadow = true, lock = false;
 	int nb_otp = size / sizeof(u32);
 	int otp, cmd;
 	unsigned int offs = offset;

 	if (offs >= STM32_BSEC_LOCK_OFFSET) {
 		offs -= STM32_BSEC_LOCK_OFFSET;
 		lock = true;
 	} else if (offs >= STM32_BSEC_OTP_OFFSET) {
 		offs -= STM32_BSEC_OTP_OFFSET;
 		shadow = false;
 	}

 	if ((offs % 4) || (size % 4) || !size)
 		return -EINVAL;

 	if (IS_ENABLED(CONFIG_OPTEE) && priv->tee) {
 		cmd = FUSE_ACCESS;
 		if (shadow)
 			cmd = SHADOW_ACCESS;
 		if (lock)
 			cmd = LOCK_ACCESS;
 		ret = bsec_optee_pta(dev, PTA_BSEC_WRITE_MEM, cmd, offs, (void *)buf, size);
 		if (ret)
 			return ret;

 		return size;
 	}

 	otp = offs / sizeof(u32);

 	for (i = otp; i < otp + nb_otp && i <= BSEC_OTP_MAX_VALUE; i++) {
 		u32 *val = &((u32 *)buf)[i - otp];

 		if (lock)
 			ret = stm32mp_bsec_write_lock(dev, *val, i);
 		else if (shadow)
 			ret = stm32mp_bsec_write_shadow(dev, *val, i);
 		else
 			ret = stm32mp_bsec_write_otp(dev, *val, i);
 		if (ret)
 			break;
 	}
 	if (ret)
 		return ret;
 	else
 		return (i - otp) * 4;
 }

 static const struct misc_ops stm32mp_bsec_ops = {
 	.read = stm32mp_bsec_read,
 	.write = stm32mp_bsec_write,
 };

 static int stm32mp_bsec_of_to_plat(struct udevice *dev)
 {
 	struct stm32mp_bsec_plat *plat = dev_get_plat(dev);

 	plat->base = dev_read_addr_ptr(dev);

 	return 0;
 }

 static int stm32mp_bsec_probe(struct udevice *dev)
 {
 	int otp;
 	struct stm32mp_bsec_plat *plat;
 	struct clk_bulk clk_bulk;
 	int ret;

 	ret = clk_get_bulk(dev, &clk_bulk);
 	if (!ret) {
 		ret = clk_enable_bulk(&clk_bulk);
 		if (ret)
 			return ret;
 	}

 	if (IS_ENABLED(CONFIG_OPTEE))
 		bsec_optee_open(dev);

 	/*
 	 * update unlocked shadow for OTP cleared by the rom code
 	 * only executed in SPL, it is done in TF-A for TFABOOT
 	 */
 	if (IS_ENABLED(CONFIG_SPL_BUILD)) {
 		plat = dev_get_plat(dev);

 		for (otp = 57; otp <= BSEC_OTP_MAX_VALUE; otp++)
 			if (!bsec_read_SR_lock(plat->base, otp))
 				bsec_shadow_register(dev, plat->base, otp);
 	}

 	return 0;
 }

 static const struct udevice_id stm32mp_bsec_ids[] = {
 	{ .compatible = "st,stm32mp13-bsec" },
 	{ .compatible = "st,stm32mp15-bsec" },
 	{}
 };

 U_BOOT_DRIVER(stm32mp_bsec) = {
 	.name = "stm32mp_bsec",
 	.id = UCLASS_MISC,
 	.of_match = stm32mp_bsec_ids,
 	.of_to_plat = stm32mp_bsec_of_to_plat,
 	.plat_auto = sizeof(struct stm32mp_bsec_plat),
 	.priv_auto = sizeof(struct stm32mp_bsec_priv),
 	.ops = &stm32mp_bsec_ops,
 	.probe = stm32mp_bsec_probe,
 };

 bool bsec_dbgswenable(void)
 {
 	struct udevice *dev;
 	struct stm32mp_bsec_plat *plat;
 	int ret;

 	ret = uclass_get_device_by_driver(UCLASS_MISC,
 					  DM_DRIVER_GET(stm32mp_bsec), &dev);
 	if (ret || !dev) {
 		log_debug("bsec driver not available\n");
 		return false;
 	}

 	plat = dev_get_plat(dev);
 	if (readl(plat->base + BSEC_DENABLE_OFF) & BSEC_DENABLE_DBGSWENABLE)
 		return true;

 	return false;
 }

 u32 get_otp(int index, int shift, int mask)
 {
 	int ret;
 	struct udevice *dev;
 	u32 otp = 0;

 	ret = uclass_get_device_by_driver(UCLASS_MISC,
 					  DM_DRIVER_GET(stm32mp_bsec),
 					  &dev);

 	if (!ret)
 		ret = misc_read(dev, STM32_BSEC_SHADOW(index),
 				&otp, sizeof(otp));

 	return (otp >> shift) & mask;
 }
	// SPDX-License-Identifier: GPL-2.0+
	/*
	* Copyright (C) 2018, STMicroelectronics - All Rights Reserved
	*/

	#define LOG_CATEGORY UCLASS_MISC

	#include <common.h>
	#include <clk.h>
	#include <dm.h>
	#include <log.h>
	#include <misc.h>
	#include <tee.h>
	#include <asm/io.h>
	#include <asm/arch/bsec.h>
	#include <asm/arch/stm32mp1_smc.h>
	#include <dm/device.h>
	#include <dm/device_compat.h>
	#include <linux/arm-smccc.h>
	#include <linux/iopoll.h>
	#include <linux/printk.h>

	#define BSEC_OTP_MAX_VALUE 95
	#define BSEC_OTP_UPPER_START 32
	#define BSEC_TIMEOUT_US 10000

	/* BSEC REGISTER OFFSET (base relative) */
	#define BSEC_OTP_CONF_OFF 0x000
	#define BSEC_OTP_CTRL_OFF 0x004
	#define BSEC_OTP_WRDATA_OFF 0x008
	#define BSEC_OTP_STATUS_OFF 0x00C
	#define BSEC_OTP_LOCK_OFF 0x010
	#define BSEC_DENABLE_OFF 0x014
	#define BSEC_DISTURBED_OFF 0x01C
	#define BSEC_ERROR_OFF 0x034
	#define BSEC_WRLOCK_OFF 0x04C /* OTP write permananet lock */
	#define BSEC_SPLOCK_OFF 0x064 /* OTP write sticky lock */
	#define BSEC_SWLOCK_OFF 0x07C /* shadow write sticky lock */
	#define BSEC_SRLOCK_OFF 0x094 /* shadow read sticky lock */
	#define BSEC_OTP_DATA_OFF 0x200

	/* BSEC_CONFIGURATION Register MASK */
	#define BSEC_CONF_POWER_UP 0x001

	/* BSEC_CONTROL Register */
	#define BSEC_READ 0x000
	#define BSEC_WRITE 0x100
	#define BSEC_LOCK 0x200

	/* LOCK Register */
	#define OTP_LOCK_MASK 0x1F
	#define OTP_LOCK_BANK_SHIFT 0x05
	#define OTP_LOCK_BIT_MASK 0x01

	/* STATUS Register */
	#define BSEC_MODE_BUSY_MASK 0x08
	#define BSEC_MODE_PROGFAIL_MASK 0x10
	#define BSEC_MODE_PWR_MASK 0x20

	/* DENABLE Register */
	#define BSEC_DENABLE_DBGSWENABLE BIT(10)

	/*
	* OTP Lock services definition
	* Value must corresponding to the bit number in the register
	*/
	#define BSEC_LOCK_PROGRAM 0x04

	#define PTA_BSEC_UUID { 0x94cf71ad, 0x80e6, 0x40b5, \
	{ 0xa7, 0xc6, 0x3d, 0xc5, 0x01, 0xeb, 0x28, 0x03 } }

	/*
	* Read OTP memory
	*
	* [in] value[0].a OTP start offset in byte
	* [in] value[0].b Access type (0:shadow, 1:fuse, 2:lock)
	* [out] memref[1].buffer Output buffer to store read values
	* [out] memref[1].size Size of OTP to be read
	*
	* Return codes:
	* TEE_SUCCESS - Invoke command success
	* TEE_ERROR_BAD_PARAMETERS - Incorrect input param
	* TEE_ERROR_ACCESS_DENIED - OTP not accessible by caller
	*/
	#define PTA_BSEC_READ_MEM 0x0

	/*
	* Write OTP memory
	*
	* [in] value[0].a OTP start offset in byte
	* [in] value[0].b Access type (0:shadow, 1:fuse, 2:lock)
	* [in] memref[1].buffer Input buffer to read values
	* [in] memref[1].size Size of OTP to be written
	*
	* Return codes:
	* TEE_SUCCESS - Invoke command success
	* TEE_ERROR_BAD_PARAMETERS - Incorrect input param
	* TEE_ERROR_ACCESS_DENIED - OTP not accessible by caller
	*/
	#define PTA_BSEC_WRITE_MEM 0x1

	/* value of PTA_BSEC access type = value[in] b */
	#define SHADOW_ACCESS 0
	#define FUSE_ACCESS 1
	#define LOCK_ACCESS 2

	/**
	* bsec_lock() - manage lock for each type SR/SP/SW
	* @address: address of bsec IP register
	* @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
	* Return: true if locked else false
	*/
	static bool bsec_read_lock(void __iomem *address, u32 otp)
	{
	u32 bit;
	u32 bank;

	bit = 1 << (otp & OTP_LOCK_MASK);
	bank = ((otp >> OTP_LOCK_BANK_SHIFT) & OTP_LOCK_MASK) * sizeof(u32);

	return !!(readl((address + bank)) & bit);
	}

	/**
	* bsec_check_error() - Check status of one otp
	* @base: base address of bsec IP
	* @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
	* Return: 0 if no error, -EAGAIN or -ENOTSUPP
	*/
	static u32 bsec_check_error(void __iomem *base, u32 otp)
	{
	u32 bit;
	u32 bank;

	bit = 1 << (otp & OTP_LOCK_MASK);
	bank = ((otp >> OTP_LOCK_BANK_SHIFT) & OTP_LOCK_MASK) * sizeof(u32);

	if (readl(base + BSEC_DISTURBED_OFF + bank) & bit)
	return -EAGAIN;
	else if (readl(base + BSEC_ERROR_OFF + bank) & bit)
	return -ENOTSUPP;

	return 0;
	}

	/**
	* bsec_read_SR_lock() - read SR lock (Shadowing)
	* @base: base address of bsec IP
	* @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
	* Return: true if locked else false
	*/
	static bool bsec_read_SR_lock(void __iomem *base, u32 otp)
	{
	return bsec_read_lock(base + BSEC_SRLOCK_OFF, otp);
	}

	/**
	* bsec_read_SP_lock() - read SP lock (program Lock)
	* @base: base address of bsec IP
	* @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
	* Return: true if locked else false
	*/
	static bool bsec_read_SP_lock(void __iomem *base, u32 otp)
	{
	return bsec_read_lock(base + BSEC_SPLOCK_OFF, otp);
	}

	/**
	* bsec_SW_lock() - manage SW lock (Write in Shadow)
	* @base: base address of bsec IP
	* @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
	* Return: true if locked else false
	*/
	static bool bsec_read_SW_lock(void __iomem *base, u32 otp)
	{
	return bsec_read_lock(base + BSEC_SWLOCK_OFF, otp);
	}

	/**
	* bsec_power_safmem() - Activate or deactivate safmem power
	* @base: base address of bsec IP
	* @power: true to power up , false to power down
	* Return: 0 if succeed
	*/
	static int bsec_power_safmem(void __iomem *base, bool power)
	{
	u32 val;
	u32 mask;

	if (power) {
	setbits_le32(base + BSEC_OTP_CONF_OFF, BSEC_CONF_POWER_UP);
	mask = BSEC_MODE_PWR_MASK;
	} else {
	clrbits_le32(base + BSEC_OTP_CONF_OFF, BSEC_CONF_POWER_UP);
	mask = 0;
	}

	/* waiting loop */
	return readl_poll_timeout(base + BSEC_OTP_STATUS_OFF,
	val, (val & BSEC_MODE_PWR_MASK) == mask,
	BSEC_TIMEOUT_US);
	}

	/**
	* bsec_shadow_register() - copy safmen otp to bsec data
	* @dev: bsec IP device
	* @base: base address of bsec IP
	* @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
	* Return: 0 if no error
	*/
	static int bsec_shadow_register(struct udevice dev, void __iomem base, u32 otp)
	{
	u32 val;
	int ret;
	bool power_up = false;

	/* check if shadowing of otp is locked */
	if (bsec_read_SR_lock(base, otp))
	dev_dbg(dev, "OTP %d is locked and refreshed with 0\n",
	otp);

	/* check if safemem is power up */
	val = readl(base + BSEC_OTP_STATUS_OFF);
	if (!(val & BSEC_MODE_PWR_MASK)) {
	ret = bsec_power_safmem(base, true);
	if (ret)
	return ret;
	power_up = true;
	}
	/* set BSEC_OTP_CTRL_OFF with the otp value*/
	writel(otp \| BSEC_READ, base + BSEC_OTP_CTRL_OFF);

	/* check otp status*/
	ret = readl_poll_timeout(base + BSEC_OTP_STATUS_OFF,
	val, (val & BSEC_MODE_BUSY_MASK) == 0,
	BSEC_TIMEOUT_US);
	if (ret)
	return ret;

	ret = bsec_check_error(base, otp);

	if (power_up)
	bsec_power_safmem(base, false);

	return ret;
	}

	/**
	* bsec_read_shadow() - read an otp data value from shadow
	* @dev: bsec IP device
	* @base: base address of bsec IP
	* @val: read value
	* @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
	* Return: 0 if no error
	*/
	static int bsec_read_shadow(struct udevice dev, void __iomem base, u32 *val,
	u32 otp)
	{
	val = readl(base + BSEC_OTP_DATA_OFF + otp sizeof(u32));

	return bsec_check_error(base, otp);
	}

	/**
	* bsec_write_shadow() - write value in BSEC data register in shadow
	* @dev: bsec IP device
	* @base: base address of bsec IP
	* @val: value to write
	* @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
	* Return: 0 if no error
	*/
	static int bsec_write_shadow(struct udevice dev, void __iomem base, u32 val, u32 otp)
	{
	/* check if programming of otp is locked */
	if (bsec_read_SW_lock(base, otp))
	dev_dbg(dev, "OTP %d is lock, write will be ignore\n", otp);

	writel(val, base + BSEC_OTP_DATA_OFF + otp * sizeof(u32));

	return bsec_check_error(base, otp);
	}

	/**
	* bsec_program_otp() - program a bit in SAFMEM
	* @dev: bsec IP device
	* @base: base address of bsec IP
	* @val: value to program
	* @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
	* after the function the otp data is not refreshed in shadow
	* Return: 0 if no error
	*/
	static int bsec_program_otp(struct udevice dev, void __iomem base, u32 val, u32 otp)
	{
	u32 ret;
	bool power_up = false;

	if (bsec_read_SP_lock(base, otp))
	dev_dbg(dev, "OTP %d locked, prog will be ignore\n", otp);

	if (readl(base + BSEC_OTP_LOCK_OFF) & (1 << BSEC_LOCK_PROGRAM))
	dev_dbg(dev, "Global lock, prog will be ignore\n");

	/* check if safemem is power up */
	if (!(readl(base + BSEC_OTP_STATUS_OFF) & BSEC_MODE_PWR_MASK)) {
	ret = bsec_power_safmem(base, true);
	if (ret)
	return ret;

	power_up = true;
	}
	/* set value in write register*/
	writel(val, base + BSEC_OTP_WRDATA_OFF);

	/* set BSEC_OTP_CTRL_OFF with the otp value */
	writel(otp \| BSEC_WRITE, base + BSEC_OTP_CTRL_OFF);

	/* check otp status*/
	ret = readl_poll_timeout(base + BSEC_OTP_STATUS_OFF,
	val, (val & BSEC_MODE_BUSY_MASK) == 0,
	BSEC_TIMEOUT_US);
	if (ret)
	return ret;

	if (val & BSEC_MODE_PROGFAIL_MASK)
	ret = -EACCES;
	else
	ret = bsec_check_error(base, otp);

	if (power_up)
	bsec_power_safmem(base, false);

	return ret;
	}

	/**
	* bsec_permanent_lock_otp() - permanent lock of OTP in SAFMEM
	* @dev: bsec IP device
	* @base: base address of bsec IP
	* @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
	* Return: 0 if no error
	*/
	static int bsec_permanent_lock_otp(struct udevice dev, void __iomem base, uint32_t otp)
	{
	int ret;
	bool power_up = false;
	u32 val, addr;

	/* check if safemem is power up */
	if (!(readl(base + BSEC_OTP_STATUS_OFF) & BSEC_MODE_PWR_MASK)) {
	ret = bsec_power_safmem(base, true);
	if (ret)
	return ret;

	power_up = true;
	}

	/*
	* low OTPs = 2 bits word for low OTPs, 1 bits per word for upper OTP
	* and only 16 bits used in WRDATA
	*/
	if (otp < BSEC_OTP_UPPER_START) {
	addr = otp / 8;
	val = 0x03 << ((otp * 2) & 0xF);
	} else {
	addr = BSEC_OTP_UPPER_START / 8 +
	((otp - BSEC_OTP_UPPER_START) / 16);
	val = 0x01 << (otp & 0xF);
	}

	/* set value in write register*/
	writel(val, base + BSEC_OTP_WRDATA_OFF);

	/* set BSEC_OTP_CTRL_OFF with the otp addr and lock request*/
	writel(addr \| BSEC_WRITE \| BSEC_LOCK, base + BSEC_OTP_CTRL_OFF);

	/* check otp status*/
	ret = readl_poll_timeout(base + BSEC_OTP_STATUS_OFF,
	val, (val & BSEC_MODE_BUSY_MASK) == 0,
	BSEC_TIMEOUT_US);
	if (ret)
	return ret;

	if (val & BSEC_MODE_PROGFAIL_MASK)
	ret = -EACCES;
	else
	ret = bsec_check_error(base, otp);

	if (power_up)
	bsec_power_safmem(base, false);

	return ret;
	}

	/* BSEC MISC driver *******************************************************/
	struct stm32mp_bsec_plat {
	void __iomem *base;
	};

	struct stm32mp_bsec_priv {
	struct udevice *tee;
	};

	static int stm32mp_bsec_read_otp(struct udevice dev, u32 val, u32 otp)
	{
	struct stm32mp_bsec_plat *plat;
	u32 tmp_data = 0;
	int ret;

	if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_SPL_BUILD))
	return stm32_smc(STM32_SMC_BSEC,
	STM32_SMC_READ_OTP,
	otp, 0, val);

	plat = dev_get_plat(dev);

	/* read current shadow value */
	ret = bsec_read_shadow(dev, plat->base, &tmp_data, otp);
	if (ret)
	return ret;

	/* copy otp in shadow */
	ret = bsec_shadow_register(dev, plat->base, otp);
	if (ret)
	return ret;

	ret = bsec_read_shadow(dev, plat->base, val, otp);
	if (ret)
	return ret;

	/* restore shadow value */
	ret = bsec_write_shadow(dev, plat->base, tmp_data, otp);

	return ret;
	}

	static int stm32mp_bsec_read_shadow(struct udevice dev, u32 val, u32 otp)
	{
	struct stm32mp_bsec_plat *plat;

	if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_SPL_BUILD))
	return stm32_smc(STM32_SMC_BSEC,
	STM32_SMC_READ_SHADOW,
	otp, 0, val);

	plat = dev_get_plat(dev);

	return bsec_read_shadow(dev, plat->base, val, otp);
	}

	static int stm32mp_bsec_read_lock(struct udevice dev, u32 val, u32 otp)
	{
	struct stm32mp_bsec_plat *plat = dev_get_plat(dev);
	u32 wrlock;

	/* return OTP permanent write lock status */
	wrlock = bsec_read_lock(plat->base + BSEC_WRLOCK_OFF, otp);

	*val = 0;
	if (wrlock)
	*val = BSEC_LOCK_PERM;

	return 0;
	}

	static int stm32mp_bsec_write_otp(struct udevice *dev, u32 val, u32 otp)
	{
	struct stm32mp_bsec_plat *plat;

	if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_SPL_BUILD))
	return stm32_smc_exec(STM32_SMC_BSEC,
	STM32_SMC_PROG_OTP,
	otp, val);

	plat = dev_get_plat(dev);

	return bsec_program_otp(dev, plat->base, val, otp);

	}

	static int stm32mp_bsec_write_shadow(struct udevice *dev, u32 val, u32 otp)
	{
	struct stm32mp_bsec_plat *plat;

	if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_SPL_BUILD))
	return stm32_smc_exec(STM32_SMC_BSEC,
	STM32_SMC_WRITE_SHADOW,
	otp, val);

	plat = dev_get_plat(dev);

	return bsec_write_shadow(dev, plat->base, val, otp);
	}

	static int stm32mp_bsec_write_lock(struct udevice *dev, u32 val, u32 otp)
	{
	struct stm32mp_bsec_plat *plat;

	/* only permanent write lock is supported in U-Boot */
	if (!(val & BSEC_LOCK_PERM)) {
	dev_dbg(dev, "lock option without BSEC_LOCK_PERM: %x\n", val);
	return 0; /* nothing to do */
	}

	if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_SPL_BUILD))
	return stm32_smc_exec(STM32_SMC_BSEC,
	STM32_SMC_WRLOCK_OTP,
	otp, 0);

	plat = dev_get_plat(dev);

	return bsec_permanent_lock_otp(dev, plat->base, otp);
	}

	static int bsec_pta_open_session(struct udevice tee, u32 tee_session)
	{
	const struct tee_optee_ta_uuid uuid = PTA_BSEC_UUID;
	struct tee_open_session_arg arg;
	int rc;

	memset(&arg, 0, sizeof(arg));
	tee_optee_ta_uuid_to_octets(arg.uuid, &uuid);
	arg.clnt_login = TEE_LOGIN_REE_KERNEL;
	rc = tee_open_session(tee, &arg, 0, NULL);
	if (rc < 0)
	return -ENODEV;

	*tee_session = arg.session;

	return 0;
	}

	static int bsec_optee_open(struct udevice *dev)
	{
	struct stm32mp_bsec_priv *priv = dev_get_priv(dev);
	struct udevice *tee;
	u32 tee_session;
	int rc;

	tee = tee_find_device(NULL, NULL, NULL, NULL);
	if (!tee)
	return -ENODEV;

	/* try to open the STM32 BSEC TA */
	rc = bsec_pta_open_session(tee, &tee_session);
	if (rc)
	return rc;

	tee_close_session(tee, tee_session);

	priv->tee = tee;

	return 0;
	}

	static int bsec_optee_pta(struct udevice *dev, int cmd, int type, int offset,
	void *buff, ulong size)
	{
	struct stm32mp_bsec_priv *priv = dev_get_priv(dev);
	u32 tee_session;
	struct tee_invoke_arg arg;
	struct tee_param param[2];
	struct tee_shm *fw_shm;
	int rc;

	rc = bsec_pta_open_session(priv->tee, &tee_session);
	if (rc)
	return rc;

	rc = tee_shm_register(priv->tee, buff, size, 0, &fw_shm);
	if (rc)
	goto close_session;

	memset(&arg, 0, sizeof(arg));
	arg.func = cmd;
	arg.session = tee_session;

	memset(param, 0, sizeof(param));

	param[0].attr = TEE_PARAM_ATTR_TYPE_VALUE_INPUT;
	param[0].u.value.a = offset;
	param[0].u.value.b = type;

	if (cmd == PTA_BSEC_WRITE_MEM)
	param[1].attr = TEE_PARAM_ATTR_TYPE_MEMREF_INPUT;
	else
	param[1].attr = TEE_PARAM_ATTR_TYPE_MEMREF_OUTPUT;

	param[1].u.memref.shm = fw_shm;
	param[1].u.memref.size = size;

	rc = tee_invoke_func(priv->tee, &arg, 2, param);
	if (rc < 0 \|\| arg.ret != 0) {
	dev_err(priv->tee,
	"PTA_BSEC invoke failed TEE err: %x, err:%x\n",
	arg.ret, rc);
	if (!rc)
	rc = -EIO;
	}

	tee_shm_free(fw_shm);

	close_session:
	tee_close_session(priv->tee, tee_session);

	return rc;
	}

	static int stm32mp_bsec_read(struct udevice *dev, int offset,
	void *buf, int size)
	{
	struct stm32mp_bsec_priv *priv = dev_get_priv(dev);
	int ret;
	int i;
	bool shadow = true, lock = false;
	int nb_otp = size / sizeof(u32);
	int otp, cmd;
	unsigned int offs = offset;

	if (offs >= STM32_BSEC_LOCK_OFFSET) {
	offs -= STM32_BSEC_LOCK_OFFSET;
	lock = true;
	} else if (offs >= STM32_BSEC_OTP_OFFSET) {
	offs -= STM32_BSEC_OTP_OFFSET;
	shadow = false;
	}

	if ((offs % 4) \|\| (size % 4) \|\| !size)
	return -EINVAL;

	if (IS_ENABLED(CONFIG_OPTEE) && priv->tee) {
	cmd = FUSE_ACCESS;
	if (shadow)
	cmd = SHADOW_ACCESS;
	if (lock)
	cmd = LOCK_ACCESS;
	ret = bsec_optee_pta(dev, PTA_BSEC_READ_MEM, cmd, offs, buf, size);
	if (ret)
	return ret;

	return size;
	}

	otp = offs / sizeof(u32);

	for (i = otp; i < (otp + nb_otp) && i <= BSEC_OTP_MAX_VALUE; i++) {
	u32 addr = &((u32 )buf)[i - otp];

	if (lock)
	ret = stm32mp_bsec_read_lock(dev, addr, i);
	else if (shadow)
	ret = stm32mp_bsec_read_shadow(dev, addr, i);
	else
	ret = stm32mp_bsec_read_otp(dev, addr, i);

	if (ret)
	break;
	}
	if (ret)
	return ret;
	else
	return (i - otp) * 4;
	}

	static int stm32mp_bsec_write(struct udevice *dev, int offset,
	const void *buf, int size)
	{
	struct stm32mp_bsec_priv *priv = dev_get_priv(dev);
	int ret = 0;
	int i;
	bool shadow = true, lock = false;
	int nb_otp = size / sizeof(u32);
	int otp, cmd;
	unsigned int offs = offset;

	if (offs >= STM32_BSEC_LOCK_OFFSET) {
	offs -= STM32_BSEC_LOCK_OFFSET;
	lock = true;
	} else if (offs >= STM32_BSEC_OTP_OFFSET) {
	offs -= STM32_BSEC_OTP_OFFSET;
	shadow = false;
	}

	if ((offs % 4) \|\| (size % 4) \|\| !size)
	return -EINVAL;

	if (IS_ENABLED(CONFIG_OPTEE) && priv->tee) {
	cmd = FUSE_ACCESS;
	if (shadow)
	cmd = SHADOW_ACCESS;
	if (lock)
	cmd = LOCK_ACCESS;
	ret = bsec_optee_pta(dev, PTA_BSEC_WRITE_MEM, cmd, offs, (void *)buf, size);
	if (ret)
	return ret;

	return size;
	}

	otp = offs / sizeof(u32);

	for (i = otp; i < otp + nb_otp && i <= BSEC_OTP_MAX_VALUE; i++) {
	u32 val = &((u32 )buf)[i - otp];

	if (lock)
	ret = stm32mp_bsec_write_lock(dev, *val, i);
	else if (shadow)
	ret = stm32mp_bsec_write_shadow(dev, *val, i);
	else
	ret = stm32mp_bsec_write_otp(dev, *val, i);
	if (ret)
	break;
	}
	if (ret)
	return ret;
	else
	return (i - otp) * 4;
	}

	static const struct misc_ops stm32mp_bsec_ops = {
	.read = stm32mp_bsec_read,
	.write = stm32mp_bsec_write,
	};

	static int stm32mp_bsec_of_to_plat(struct udevice *dev)
	{
	struct stm32mp_bsec_plat *plat = dev_get_plat(dev);

	plat->base = dev_read_addr_ptr(dev);

	return 0;
	}

	static int stm32mp_bsec_probe(struct udevice *dev)
	{
	int otp;
	struct stm32mp_bsec_plat *plat;
	struct clk_bulk clk_bulk;
	int ret;

	ret = clk_get_bulk(dev, &clk_bulk);
	if (!ret) {
	ret = clk_enable_bulk(&clk_bulk);
	if (ret)
	return ret;
	}

	if (IS_ENABLED(CONFIG_OPTEE))
	bsec_optee_open(dev);

	/*
	* update unlocked shadow for OTP cleared by the rom code
	* only executed in SPL, it is done in TF-A for TFABOOT
	*/
	if (IS_ENABLED(CONFIG_SPL_BUILD)) {
	plat = dev_get_plat(dev);

	for (otp = 57; otp <= BSEC_OTP_MAX_VALUE; otp++)
	if (!bsec_read_SR_lock(plat->base, otp))
	bsec_shadow_register(dev, plat->base, otp);
	}

	return 0;
	}

	static const struct udevice_id stm32mp_bsec_ids[] = {
	{ .compatible = "st,stm32mp13-bsec" },
	{ .compatible = "st,stm32mp15-bsec" },
	{}
	};

	U_BOOT_DRIVER(stm32mp_bsec) = {
	.name = "stm32mp_bsec",
	.id = UCLASS_MISC,
	.of_match = stm32mp_bsec_ids,
	.of_to_plat = stm32mp_bsec_of_to_plat,
	.plat_auto = sizeof(struct stm32mp_bsec_plat),
	.priv_auto = sizeof(struct stm32mp_bsec_priv),
	.ops = &stm32mp_bsec_ops,
	.probe = stm32mp_bsec_probe,
	};

	bool bsec_dbgswenable(void)
	{
	struct udevice *dev;
	struct stm32mp_bsec_plat *plat;
	int ret;

	ret = uclass_get_device_by_driver(UCLASS_MISC,
	DM_DRIVER_GET(stm32mp_bsec), &dev);
	if (ret \|\| !dev) {
	log_debug("bsec driver not available\n");
	return false;
	}

	plat = dev_get_plat(dev);
	if (readl(plat->base + BSEC_DENABLE_OFF) & BSEC_DENABLE_DBGSWENABLE)
	return true;

	return false;
	}

	u32 get_otp(int index, int shift, int mask)
	{
	int ret;
	struct udevice *dev;
	u32 otp = 0;

	ret = uclass_get_device_by_driver(UCLASS_MISC,
	DM_DRIVER_GET(stm32mp_bsec),
	&dev);

	if (!ret)
	ret = misc_read(dev, STM32_BSEC_SHADOW(index),
	&otp, sizeof(otp));

	return (otp >> shift) & mask;
	}