include/configs/mgcoge.h - platform/external/u-boot - Gitiles

 /*
  * (C) Copyright 2007
  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 /*
  * High Level Configuration Options
  * (easy to change)
  */

 #define CONFIG_MPC8247		1
 #define CONFIG_MPC8272_FAMILY   1
 #define CONFIG_MGCOGE		1

 #define CONFIG_CPM2		1	/* Has a CPM2 */

 /*
  * Select serial console configuration
  *
  * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
  * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
  * for SCC).
  */
 #define	CONFIG_CONS_ON_SMC		/* Console is on SMC         */
 #undef  CONFIG_CONS_ON_SCC		/* It's not on SCC           */
 #undef	CONFIG_CONS_NONE		/* It's not on external UART */
 #define CONFIG_CONS_INDEX	2	/* SMC2 is used for console  */

 /*
  * Select ethernet configuration
  *
  * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected,
  * then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for
  * SCC, 1-3 for FCC)
  *
  * If CONFIG_ETHER_NONE is defined, then either the ethernet routines
  * must be defined elsewhere (as for the console), or CONFIG_CMD_NET
  * must be unset.
  */
 #define	CONFIG_ETHER_ON_SCC		/* Ethernet is on SCC */
 #undef	CONFIG_ETHER_ON_FCC		/* Ethernet is not on FCC     */
 #undef	CONFIG_ETHER_NONE		/* No external Ethernet   */

 #define CONFIG_ETHER_INDEX	4
 #define CFG_SCC_TOUT_LOOP	10000000

 # define CFG_CMXSCR_VALUE	(CMXSCR_RS4CS_CLK7 | CMXSCR_TS4CS_CLK8)

 #ifndef CONFIG_8260_CLKIN
 #define CONFIG_8260_CLKIN	66000000	/* in Hz */
 #endif

 #define CONFIG_BAUDRATE		115200

 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

 #define CONFIG_CMD_ECHO
 #define CONFIG_CMD_IMMAP
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_PING

 /*
  * Default environment settings
  */
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
 	"u-boot_addr=100000\0"						\
 	"kernel_addr=200000\0"						\
 	"fdt_addr=400000\0"						\
 	"rootpath=/opt/eldk-4.2/ppc_82xx\0"				\
 	"u-boot=/tftpboot/mgcoge/u-boot.bin\0"				\
 	"bootfile=/tftpboot/mgcoge/uImage\0"				\
 	"fdt_file=/tftpboot/mgcoge/mgcoge.dtb\0"			\
 	"load=tftp ${u-boot_addr} ${u-boot}\0"				\
 	"update=prot off fe000000 fe03ffff; era fe000000 fe03ffff; "	\
 		"cp.b ${u-boot_addr} fe000000 ${filesize};"		\
 		"prot on fe000000 fe03ffff\0"				\
 	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=${serverip}:${rootpath}\0"			\
 	"addcon=setenv bootargs ${bootargs} console=ttyCPM0,,${baudrate}\0"	\
 	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
 	"addip=setenv bootargs ${bootargs} "				\
 		"ip=${ipaddr}:${serverip}:${gatewayip}:"		\
 		"${netmask}:${hostname}:${netdev}:off panic=1 "		\
 		"console=${console}\0"					\
 	"net_nfs=tftp ${kernel_addr} ${bootfile}; "			\
 		"tftp ${fdt_addr} ${fdt_file}; run nfsargs addip addcon;"\
 		"bootm ${kernel_addr} - ${fdt_addr}\0"			\
 	"net_self=tftp ${kernel_addr} ${bootfile}; "			\
 		"tftp ${fdt_addr} ${fdt_file}; "			\
 		"tftp ${ramdisk_addr} ${ramdisk_file}; "		\
 		"run ramargs addip; "					\
 		"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
 	""
 #define CONFIG_BOOTCOMMAND	"run net_nfs"
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */

 #undef	CONFIG_WATCHDOG			/* disable platform specific watchdog */

 /*
  * Miscellaneous configurable options
  */
 #define CFG_HUSH_PARSER
 #define CFG_PROMPT_HUSH_PS2	"> "
 #define CFG_LONGHELP			/* undef to save memory	    */
 #define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size  */
 #define CFG_MAXARGS		16		/* max number of command args */
 #define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size  */

 #define CFG_MEMTEST_START	0x00100000	/* memtest works on */
 #define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/

 #define CFG_LOAD_ADDR		0x100000	/* default load address */

 #define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */

 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }

 #define CFG_SDRAM_BASE		0x00000000
 #define CFG_FLASH_BASE		0xFE000000
 #define CFG_FLASH_SIZE		32
 #define CFG_FLASH_CFI
 #define CFG_FLASH_CFI_DRIVER
 #define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks	*/
 #define CFG_MAX_FLASH_SECT	256	/* max num of sects on one chip */

 #define CFG_MONITOR_BASE	TEXT_BASE
 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
 #define CFG_RAMBOOT
 #endif

 #define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256KB for Monitor */

 #define CFG_ENV_IS_IN_FLASH

 #ifdef CFG_ENV_IS_IN_FLASH
 #define CFG_ENV_SECT_SIZE	0x20000
 #define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
 #endif /* CFG_ENV_IS_IN_FLASH */

 #define CFG_IMMR		0xF0000000

 #define CFG_INIT_RAM_ADDR	CFG_IMMR
 #define CFG_INIT_RAM_END	0x2000	/* End of used area in DPRAM	*/
 #define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET

 /* Hard reset configuration word */
 #define CFG_HRCW_MASTER		0x0604b211

 /* No slaves */
 #define CFG_HRCW_SLAVE1 	0
 #define CFG_HRCW_SLAVE2 	0
 #define CFG_HRCW_SLAVE3 	0
 #define CFG_HRCW_SLAVE4 	0
 #define CFG_HRCW_SLAVE5 	0
 #define CFG_HRCW_SLAVE6 	0
 #define CFG_HRCW_SLAVE7 	0

 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM		0x02	/* Software reboot                  */

 #define CFG_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()	*/
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */

 #define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPUs */
 #if defined(CONFIG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif

 #define CFG_HID0_INIT		0
 #define CFG_HID0_FINAL		(HID0_ICE | HID0_IFEM | HID0_ABE)

 #define CFG_HID2		0

 #define CFG_SIUMCR		0x4020c200
 #define CFG_SYPCR		0xFFFFFFC3
 #define CFG_BCR			0x10000000
 #define CFG_SCCR		(SCCR_PCI_MODE | SCCR_PCI_MODCK)

 /*-----------------------------------------------------------------------
  * RMR - Reset Mode Register                                     5-5
  *-----------------------------------------------------------------------
  * turn on Checkstop Reset Enable
  */
 #define CFG_RMR         0

 /*-----------------------------------------------------------------------
  * TMCNTSC - Time Counter Status and Control                     4-40
  *-----------------------------------------------------------------------
  * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
  * and enable Time Counter
  */
 #define CFG_TMCNTSC     (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)

 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control                 4-42
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
  * Periodic timer
  */
 #define CFG_PISCR       (PISCR_PS|PISCR_PTF|PISCR_PTE)

 /*-----------------------------------------------------------------------
  * RCCR - RISC Controller Configuration                         13-7
  *-----------------------------------------------------------------------
  */
 #define CFG_RCCR        0

 /*
  * Init Memory Controller:
  *
  * Bank Bus     Machine PortSz  Device
  * ---- ---     ------- ------  ------
  *  0   60x     GPCM     8 bit  FLASH
  *  1   60x     SDRAM   32 bit  SDRAM
  *
  */
 /* Bank 0 - FLASH
  */
 #define CFG_BR0_PRELIM  ((CFG_FLASH_BASE & BRx_BA_MSK)	|\
 			 BRx_PS_8			|\
 			 BRx_MS_GPCM_P			|\
 			 BRx_V)

 #define CFG_OR0_PRELIM  (MEG_TO_AM(CFG_FLASH_SIZE)	|\
 			 ORxG_CSNT			|\
 			 ORxG_ACS_DIV2			|\
 			 ORxG_SCY_5_CLK			|\
 			 ORxG_TRLX )


 /* Bank 1 - 60x bus SDRAM
  */
 #define SDRAM_MAX_SIZE	0x08000000	/* max. 128 MB		*/
 #define CFG_GLOBAL_SDRAM_LIMIT	(256 << 20)	/* less than 256 MB */

 #define CFG_MPTPR       0x1800

 /*-----------------------------------------------------------------------------
  * Address for Mode Register Set (MRS) command
  *-----------------------------------------------------------------------------
  */
 #define CFG_MRS_OFFS	0x00000110
 #define CFG_PSRT        0x0e

 #define CFG_BR1_PRELIM  ((CFG_SDRAM_BASE & BRx_BA_MSK)  |\
 			 BRx_PS_64                      |\
 			 BRx_MS_SDRAM_P                 |\
 			 BRx_V)

 #define CFG_OR1_PRELIM	CFG_OR1

 /* SDRAM initialization values
 */

 #define CFG_OR1    ((~(CFG_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
 			 ORxS_BPD_8                     |\
 			 ORxS_ROWST_PBI0_A7		|\
 			 ORxS_NUMR_13)

 #define CFG_PSDMR  (PSDMR_SDAM_A14_IS_A5 |\
 			 PSDMR_BSMA_A14_A16           |\
 			 PSDMR_SDA10_PBI0_A9		|\
 			 PSDMR_RFRC_5_CLK               |\
 			 PSDMR_PRETOACT_2W              |\
 			 PSDMR_ACTTORW_2W               |\
 			 PSDMR_LDOTOPRE_1C              |\
 			 PSDMR_WRC_1C                   |\
 			 PSDMR_CL_2)

 #define	CFG_RESET_ADDRESS 0xFDFFFFFC	/* "bad" address		*/

 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1

 #define OF_CPU			"PowerPC,8247@0"
 #define OF_SOC			"soc@f0000000"
 #define OF_TBCLK		(bd->bi_busfreq / 4)
 #define OF_STDOUT_PATH		"/soc/cpm/serial@11a90"

 #endif /* __CONFIG_H */
	/*
	* (C) Copyright 2007
	* Heiko Schocher, DENX Software Engineering, hs@denx.de.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	/*
	* High Level Configuration Options
	* (easy to change)
	*/

	#define CONFIG_MPC8247 1
	#define CONFIG_MPC8272_FAMILY 1
	#define CONFIG_MGCOGE 1

	#define CONFIG_CPM2 1 /* Has a CPM2 */

	/*
	* Select serial console configuration
	*
	* If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
	* CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
	* for SCC).
	*/
	#define CONFIG_CONS_ON_SMC /* Console is on SMC */
	#undef CONFIG_CONS_ON_SCC /* It's not on SCC */
	#undef CONFIG_CONS_NONE /* It's not on external UART */
	#define CONFIG_CONS_INDEX 2 /* SMC2 is used for console */

	/*
	* Select ethernet configuration
	*
	* If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected,
	* then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for
	* SCC, 1-3 for FCC)
	*
	* If CONFIG_ETHER_NONE is defined, then either the ethernet routines
	* must be defined elsewhere (as for the console), or CONFIG_CMD_NET
	* must be unset.
	*/
	#define CONFIG_ETHER_ON_SCC /* Ethernet is on SCC */
	#undef CONFIG_ETHER_ON_FCC /* Ethernet is not on FCC */
	#undef CONFIG_ETHER_NONE /* No external Ethernet */

	#define CONFIG_ETHER_INDEX 4
	#define CFG_SCC_TOUT_LOOP 10000000

	# define CFG_CMXSCR_VALUE (CMXSCR_RS4CS_CLK7 \| CMXSCR_TS4CS_CLK8)

	#ifndef CONFIG_8260_CLKIN
	#define CONFIG_8260_CLKIN 66000000 /* in Hz */
	#endif

	#define CONFIG_BAUDRATE 115200

	/*
	* Command line configuration.
	*/
	#include <config_cmd_default.h>

	#define CONFIG_CMD_ECHO
	#define CONFIG_CMD_IMMAP
	#define CONFIG_CMD_MII
	#define CONFIG_CMD_PING

	/*
	* Default environment settings
	*/
	#define CONFIG_EXTRA_ENV_SETTINGS \
	"netdev=eth0\0" \
	"u-boot_addr=100000\0" \
	"kernel_addr=200000\0" \
	"fdt_addr=400000\0" \
	"rootpath=/opt/eldk-4.2/ppc_82xx\0" \
	"u-boot=/tftpboot/mgcoge/u-boot.bin\0" \
	"bootfile=/tftpboot/mgcoge/uImage\0" \
	"fdt_file=/tftpboot/mgcoge/mgcoge.dtb\0" \
	"load=tftp ${u-boot_addr} ${u-boot}\0" \
	"update=prot off fe000000 fe03ffff; era fe000000 fe03ffff; " \
	"cp.b ${u-boot_addr} fe000000 ${filesize};" \
	"prot on fe000000 fe03ffff\0" \
	"ramargs=setenv bootargs root=/dev/ram rw\0" \
	"nfsargs=setenv bootargs root=/dev/nfs rw " \
	"nfsroot=${serverip}:${rootpath}\0" \
	"addcon=setenv bootargs ${bootargs} console=ttyCPM0,,${baudrate}\0" \
	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
	"addip=setenv bootargs ${bootargs} " \
	"ip=${ipaddr}:${serverip}:${gatewayip}:" \
	"${netmask}:${hostname}:${netdev}:off panic=1 " \
	"console=${console}\0" \
	"net_nfs=tftp ${kernel_addr} ${bootfile}; " \
	"tftp ${fdt_addr} ${fdt_file}; run nfsargs addip addcon;"\
	"bootm ${kernel_addr} - ${fdt_addr}\0" \
	"net_self=tftp ${kernel_addr} ${bootfile}; " \
	"tftp ${fdt_addr} ${fdt_file}; " \
	"tftp ${ramdisk_addr} ${ramdisk_file}; " \
	"run ramargs addip; " \
	"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
	""
	#define CONFIG_BOOTCOMMAND "run net_nfs"
	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */

	#undef CONFIG_WATCHDOG /* disable platform specific watchdog */

	/*
	* Miscellaneous configurable options
	*/
	#define CFG_HUSH_PARSER
	#define CFG_PROMPT_HUSH_PS2 "> "
	#define CFG_LONGHELP /* undef to save memory */
	#define CFG_PROMPT "=> " /* Monitor Command Prompt */
	#if defined(CONFIG_CMD_KGDB)
	#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
	#else
	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
	#endif
	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
	#define CFG_MAXARGS 16 /* max number of command args */
	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */

	#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
	#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */

	#define CFG_LOAD_ADDR 0x100000 /* default load address */

	#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */

	#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }

	#define CFG_SDRAM_BASE 0x00000000
	#define CFG_FLASH_BASE 0xFE000000
	#define CFG_FLASH_SIZE 32
	#define CFG_FLASH_CFI
	#define CFG_FLASH_CFI_DRIVER
	#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */
	#define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */

	#define CFG_MONITOR_BASE TEXT_BASE
	#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
	#define CFG_RAMBOOT
	#endif

	#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256KB for Monitor */

	#define CFG_ENV_IS_IN_FLASH

	#ifdef CFG_ENV_IS_IN_FLASH
	#define CFG_ENV_SECT_SIZE 0x20000
	#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
	#endif /* CFG_ENV_IS_IN_FLASH */

	#define CFG_IMMR 0xF0000000

	#define CFG_INIT_RAM_ADDR CFG_IMMR
	#define CFG_INIT_RAM_END 0x2000 /* End of used area in DPRAM */
	#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
	#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET

	/* Hard reset configuration word */
	#define CFG_HRCW_MASTER 0x0604b211

	/* No slaves */
	#define CFG_HRCW_SLAVE1 0
	#define CFG_HRCW_SLAVE2 0
	#define CFG_HRCW_SLAVE3 0
	#define CFG_HRCW_SLAVE4 0
	#define CFG_HRCW_SLAVE5 0
	#define CFG_HRCW_SLAVE6 0
	#define CFG_HRCW_SLAVE7 0

	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	#define BOOTFLAG_WARM 0x02 /* Software reboot */

	#define CFG_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */
	#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */

	#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPUs */
	#if defined(CONFIG_CMD_KGDB)
	# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
	#endif

	#define CFG_HID0_INIT 0
	#define CFG_HID0_FINAL (HID0_ICE \| HID0_IFEM \| HID0_ABE)

	#define CFG_HID2 0

	#define CFG_SIUMCR 0x4020c200
	#define CFG_SYPCR 0xFFFFFFC3
	#define CFG_BCR 0x10000000
	#define CFG_SCCR (SCCR_PCI_MODE \| SCCR_PCI_MODCK)

	/*-----------------------------------------------------------------------
	* RMR - Reset Mode Register 5-5
	*-----------------------------------------------------------------------
	* turn on Checkstop Reset Enable
	*/
	#define CFG_RMR 0

	/*-----------------------------------------------------------------------
	* TMCNTSC - Time Counter Status and Control 4-40
	*-----------------------------------------------------------------------
	* Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
	* and enable Time Counter
	*/
	#define CFG_TMCNTSC (TMCNTSC_SEC\|TMCNTSC_ALR\|TMCNTSC_TCF\|TMCNTSC_TCE)

	/*-----------------------------------------------------------------------
	* PISCR - Periodic Interrupt Status and Control 4-42
	*-----------------------------------------------------------------------
	* Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
	* Periodic timer
	*/
	#define CFG_PISCR (PISCR_PS\|PISCR_PTF\|PISCR_PTE)

	/*-----------------------------------------------------------------------
	* RCCR - RISC Controller Configuration 13-7
	*-----------------------------------------------------------------------
	*/
	#define CFG_RCCR 0

	/*
	* Init Memory Controller:
	*
	* Bank Bus Machine PortSz Device
	* ---- --- ------- ------ ------
	* 0 60x GPCM 8 bit FLASH
	* 1 60x SDRAM 32 bit SDRAM
	*
	*/
	/* Bank 0 - FLASH
	*/
	#define CFG_BR0_PRELIM ((CFG_FLASH_BASE & BRx_BA_MSK) \|\
	BRx_PS_8 \|\
	BRx_MS_GPCM_P \|\
	BRx_V)

	#define CFG_OR0_PRELIM (MEG_TO_AM(CFG_FLASH_SIZE) \|\
	ORxG_CSNT \|\
	ORxG_ACS_DIV2 \|\
	ORxG_SCY_5_CLK \|\
	ORxG_TRLX )


	/* Bank 1 - 60x bus SDRAM
	*/
	#define SDRAM_MAX_SIZE 0x08000000 /* max. 128 MB */
	#define CFG_GLOBAL_SDRAM_LIMIT (256 << 20) /* less than 256 MB */

	#define CFG_MPTPR 0x1800

	/*-----------------------------------------------------------------------------
	* Address for Mode Register Set (MRS) command
	*-----------------------------------------------------------------------------
	*/
	#define CFG_MRS_OFFS 0x00000110
	#define CFG_PSRT 0x0e

	#define CFG_BR1_PRELIM ((CFG_SDRAM_BASE & BRx_BA_MSK) \|\
	BRx_PS_64 \|\
	BRx_MS_SDRAM_P \|\
	BRx_V)

	#define CFG_OR1_PRELIM CFG_OR1

	/* SDRAM initialization values
	*/

	#define CFG_OR1 ((~(CFG_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) \|\
	ORxS_BPD_8 \|\
	ORxS_ROWST_PBI0_A7 \|\
	ORxS_NUMR_13)

	#define CFG_PSDMR (PSDMR_SDAM_A14_IS_A5 \|\
	PSDMR_BSMA_A14_A16 \|\
	PSDMR_SDA10_PBI0_A9 \|\
	PSDMR_RFRC_5_CLK \|\
	PSDMR_PRETOACT_2W \|\
	PSDMR_ACTTORW_2W \|\
	PSDMR_LDOTOPRE_1C \|\
	PSDMR_WRC_1C \|\
	PSDMR_CL_2)

	#define CFG_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */

	/* pass open firmware flat tree */
	#define CONFIG_OF_LIBFDT 1
	#define CONFIG_OF_BOARD_SETUP 1

	#define OF_CPU "PowerPC,8247@0"
	#define OF_SOC "soc@f0000000"
	#define OF_TBCLK (bd->bi_busfreq / 4)
	#define OF_STDOUT_PATH "/soc/cpm/serial@11a90"

	#endif /* __CONFIG_H */