| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2016 Google, Inc |
| * |
| * Based on code from coreboot src/soc/intel/broadwell/cpu.c |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <cpu.h> |
| #include <init.h> |
| #include <log.h> |
| #include <asm/cpu.h> |
| #include <asm/cpu_x86.h> |
| #include <asm/cpu_common.h> |
| #include <asm/intel_regs.h> |
| #include <asm/lpc_common.h> |
| #include <asm/msr.h> |
| #include <asm/pci.h> |
| #include <asm/post.h> |
| #include <asm/turbo.h> |
| #include <asm/arch/cpu.h> |
| #include <asm/arch/pch.h> |
| #include <asm/arch/rcb.h> |
| |
| int arch_cpu_init_dm(void) |
| { |
| struct udevice *dev; |
| int ret; |
| |
| /* Start up the LPC so we have serial */ |
| ret = uclass_first_device(UCLASS_LPC, &dev); |
| if (ret) |
| return ret; |
| if (!dev) |
| return -ENODEV; |
| ret = cpu_set_flex_ratio_to_tdp_nominal(); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| void set_max_freq(void) |
| { |
| msr_t msr, perf_ctl; |
| |
| if (cpu_config_tdp_levels()) { |
| /* Set to nominal TDP ratio */ |
| msr = msr_read(MSR_CONFIG_TDP_NOMINAL); |
| perf_ctl.lo = (msr.lo & 0xff) << 8; |
| } else { |
| /* Platform Info bits 15:8 give max ratio */ |
| msr = msr_read(MSR_PLATFORM_INFO); |
| perf_ctl.lo = msr.lo & 0xff00; |
| } |
| |
| perf_ctl.hi = 0; |
| msr_write(MSR_IA32_PERF_CTL, perf_ctl); |
| |
| debug("CPU: frequency set to %d MHz\n", |
| ((perf_ctl.lo >> 8) & 0xff) * INTEL_BCLK_MHZ); |
| } |
| |
| int arch_cpu_init(void) |
| { |
| post_code(POST_CPU_INIT); |
| |
| #ifdef CONFIG_TPL |
| /* Do a mini-init if TPL has already done the full init */ |
| return x86_cpu_reinit_f(); |
| #else |
| return x86_cpu_init_f(); |
| #endif |
| } |
| |
| int checkcpu(void) |
| { |
| int ret; |
| |
| set_max_freq(); |
| |
| ret = cpu_common_init(); |
| if (ret) |
| return ret; |
| gd->arch.pei_boot_mode = PEI_BOOT_NONE; |
| |
| return 0; |
| } |
| |
| int print_cpuinfo(void) |
| { |
| char processor_name[CPU_MAX_NAME_LEN]; |
| const char *name; |
| |
| /* Print processor name */ |
| name = cpu_get_name(processor_name); |
| printf("CPU: %s\n", name); |
| |
| return 0; |
| } |
| |
| void board_debug_uart_init(void) |
| { |
| /* com1 / com2 decode range */ |
| pci_x86_write_config(PCH_DEV_LPC, LPC_IO_DEC, 1 << 4, PCI_SIZE_16); |
| |
| pci_x86_write_config(PCH_DEV_LPC, LPC_EN, COMA_LPC_EN, PCI_SIZE_16); |
| } |