| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Motorcomm 8531 PHY driver. |
| * |
| * Copyright (C) 2023 StarFive Technology Co., Ltd. |
| */ |
| |
| #include <config.h> |
| #include <malloc.h> |
| #include <phy.h> |
| #include <linux/bitfield.h> |
| |
| #define PHY_ID_YT8511 0x0000010a |
| #define PHY_ID_YT8531 0x4f51e91b |
| #define PHY_ID_YT8821 0x4f51ea19 |
| #define PHY_ID_MASK GENMASK(31, 0) |
| |
| /* Extended Register's Address Offset Register */ |
| #define YTPHY_PAGE_SELECT 0x1E |
| |
| /* Extended Register's Data Register */ |
| #define YTPHY_PAGE_DATA 0x1F |
| |
| #define YTPHY_SYNCE_CFG_REG 0xA012 |
| |
| #define YT8531_PAD_DRIVE_STRENGTH_CFG_REG 0xA010 |
| #define YT8531_RGMII_RXC_DS_MASK GENMASK(15, 13) |
| #define YT8531_RGMII_RXD_DS_HI_MASK BIT(12) /* Bit 2 of rxd_ds */ |
| #define YT8531_RGMII_RXD_DS_LOW_MASK GENMASK(5, 4) /* Bit 1/0 of rxd_ds */ |
| #define YT8531_RGMII_RX_DS_DEFAULT 0x3 |
| |
| #define YTPHY_DTS_OUTPUT_CLK_DIS 0 |
| #define YTPHY_DTS_OUTPUT_CLK_25M 25000000 |
| #define YTPHY_DTS_OUTPUT_CLK_125M 125000000 |
| |
| #define YT8511_EXT_CLK_GATE 0x0c |
| #define YT8511_EXT_DELAY_DRIVE 0x0d |
| #define YT8511_EXT_SLEEP_CTRL 0x27 |
| |
| /* 2b00 25m from pll |
| * 2b01 25m from xtl *default* |
| * 2b10 62.m from pll |
| * 2b11 125m from pll |
| */ |
| #define YT8511_CLK_125M (BIT(2) | BIT(1)) |
| #define YT8511_PLLON_SLP BIT(14) |
| |
| /* RX Delay enabled = 1.8ns 1000T, 8ns 10/100T */ |
| #define YT8511_DELAY_RX BIT(0) |
| |
| /* TX Gig-E Delay is bits 7:4, default 0x5 |
| * TX Fast-E Delay is bits 15:12, default 0xf |
| * Delay = 150ps * N - 250ps |
| * On = 2000ps, off = 50ps |
| */ |
| #define YT8511_DELAY_GE_TX_EN (0xf << 4) |
| #define YT8511_DELAY_GE_TX_DIS (0x2 << 4) |
| #define YT8511_DELAY_FE_TX_EN (0xf << 12) |
| #define YT8511_DELAY_FE_TX_DIS (0x2 << 12) |
| |
| #define YT8531_SCR_SYNCE_ENABLE BIT(6) |
| /* 1b0 output 25m clock *default* |
| * 1b1 output 125m clock |
| */ |
| #define YT8531_SCR_CLK_FRE_SEL_125M BIT(4) |
| #define YT8531_SCR_CLK_SRC_MASK GENMASK(3, 1) |
| #define YT8531_SCR_CLK_SRC_PLL_125M 0 |
| #define YT8531_SCR_CLK_SRC_UTP_RX 1 |
| #define YT8531_SCR_CLK_SRC_SDS_RX 2 |
| #define YT8531_SCR_CLK_SRC_CLOCK_FROM_DIGITAL 3 |
| #define YT8531_SCR_CLK_SRC_REF_25M 4 |
| #define YT8531_SCR_CLK_SRC_SSC_25M 5 |
| |
| /* 1b0 use original tx_clk_rgmii *default* |
| * 1b1 use inverted tx_clk_rgmii. |
| */ |
| #define YT8531_RC1R_TX_CLK_SEL_INVERTED BIT(14) |
| #define YT8531_RC1R_RX_DELAY_MASK GENMASK(13, 10) |
| #define YT8531_RC1R_FE_TX_DELAY_MASK GENMASK(7, 4) |
| #define YT8531_RC1R_GE_TX_DELAY_MASK GENMASK(3, 0) |
| #define YT8531_RC1R_RGMII_0_000_NS 0 |
| #define YT8531_RC1R_RGMII_0_150_NS 1 |
| #define YT8531_RC1R_RGMII_0_300_NS 2 |
| #define YT8531_RC1R_RGMII_0_450_NS 3 |
| #define YT8531_RC1R_RGMII_0_600_NS 4 |
| #define YT8531_RC1R_RGMII_0_750_NS 5 |
| #define YT8531_RC1R_RGMII_0_900_NS 6 |
| #define YT8531_RC1R_RGMII_1_050_NS 7 |
| #define YT8531_RC1R_RGMII_1_200_NS 8 |
| #define YT8531_RC1R_RGMII_1_350_NS 9 |
| #define YT8531_RC1R_RGMII_1_500_NS 10 |
| #define YT8531_RC1R_RGMII_1_650_NS 11 |
| #define YT8531_RC1R_RGMII_1_800_NS 12 |
| #define YT8531_RC1R_RGMII_1_950_NS 13 |
| #define YT8531_RC1R_RGMII_2_100_NS 14 |
| #define YT8531_RC1R_RGMII_2_250_NS 15 |
| |
| /* Phy gmii clock gating Register */ |
| #define YT8531_CLOCK_GATING_REG 0xC |
| #define YT8531_CGR_RX_CLK_EN BIT(12) |
| |
| /* Specific Status Register */ |
| #define YTPHY_SPECIFIC_STATUS_REG 0x11 |
| #define YTPHY_DUPLEX_MASK BIT(13) |
| #define YTPHY_DUPLEX_SHIFT 13 |
| #define YTPHY_SPEED_MASK ((0x3 << 14) | BIT(9)) |
| #define YTPHY_SPEED_10M ((0x0 << 14)) |
| #define YTPHY_SPEED_100M ((0x1 << 14)) |
| #define YTPHY_SPEED_1000M ((0x2 << 14)) |
| #define YTPHY_SPEED_10G ((0x3 << 14)) |
| #define YTPHY_SPEED_2500M ((0x0 << 14) | BIT(9)) |
| |
| #define YT8531_EXTREG_SLEEP_CONTROL1_REG 0x27 |
| #define YT8531_ESC1R_SLEEP_SW BIT(15) |
| #define YT8531_ESC1R_PLLON_SLP BIT(14) |
| |
| #define YT8531_RGMII_CONFIG1_REG 0xA003 |
| |
| #define YT8531_CHIP_CONFIG_REG 0xA001 |
| #define YT8531_CCR_SW_RST BIT(15) |
| /* 1b0 disable 1.9ns rxc clock delay *default* |
| * 1b1 enable 1.9ns rxc clock delay |
| */ |
| #define YT8531_CCR_RXC_DLY_EN BIT(8) |
| #define YT8531_CCR_RXC_DLY_1_900_NS 1900 |
| |
| #define YT8531_CCR_CFG_LDO_MASK GENMASK(5, 4) |
| #define YT8531_CCR_CFG_LDO_3V3 0x0 |
| #define YT8531_CCR_CFG_LDO_1V8 0x2 |
| |
| /* bits in struct ytphy_plat_priv->flag */ |
| #define TX_CLK_ADJ_ENABLED BIT(0) |
| #define AUTO_SLEEP_DISABLED BIT(1) |
| #define KEEP_PLL_ENABLED BIT(2) |
| #define TX_CLK_10_INVERTED BIT(3) |
| #define TX_CLK_100_INVERTED BIT(4) |
| #define TX_CLK_1000_INVERTED BIT(5) |
| |
| #define YT8821_SDS_EXT_CSR_CTRL_REG 0x23 |
| #define YT8821_SDS_EXT_CSR_VCO_LDO_EN BIT(15) |
| #define YT8821_SDS_EXT_CSR_VCO_BIAS_LPF_EN BIT(8) |
| |
| #define YT8821_UTP_EXT_PI_CTRL_REG 0x56 |
| #define YT8821_UTP_EXT_PI_RST_N_FIFO BIT(5) |
| #define YT8821_UTP_EXT_PI_TX_CLK_SEL_AFE BIT(4) |
| #define YT8821_UTP_EXT_PI_RX_CLK_3_SEL_AFE BIT(3) |
| #define YT8821_UTP_EXT_PI_RX_CLK_2_SEL_AFE BIT(2) |
| #define YT8821_UTP_EXT_PI_RX_CLK_1_SEL_AFE BIT(1) |
| #define YT8821_UTP_EXT_PI_RX_CLK_0_SEL_AFE BIT(0) |
| |
| #define YT8821_UTP_EXT_VCT_CFG6_CTRL_REG 0x97 |
| #define YT8821_UTP_EXT_FECHO_AMP_TH_HUGE GENMASK(15, 8) |
| |
| #define YT8821_UTP_EXT_ECHO_CTRL_REG 0x336 |
| #define YT8821_UTP_EXT_TRACE_LNG_GAIN_THR_1000 GENMASK(14, 8) |
| |
| #define YT8821_UTP_EXT_GAIN_CTRL_REG 0x340 |
| #define YT8821_UTP_EXT_TRACE_MED_GAIN_THR_1000 GENMASK(6, 0) |
| |
| #define YT8821_UTP_EXT_RPDN_CTRL_REG 0x34E |
| #define YT8821_UTP_EXT_RPDN_BP_FFE_LNG_2500 BIT(15) |
| #define YT8821_UTP_EXT_RPDN_BP_FFE_SHT_2500 BIT(7) |
| #define YT8821_UTP_EXT_RPDN_IPR_SHT_2500 GENMASK(6, 0) |
| |
| #define YT8821_UTP_EXT_TH_20DB_2500_CTRL_REG 0x36A |
| #define YT8821_UTP_EXT_TH_20DB_2500 GENMASK(15, 0) |
| |
| #define YT8821_UTP_EXT_TRACE_CTRL_REG 0x372 |
| #define YT8821_UTP_EXT_TRACE_LNG_GAIN_THE_2500 GENMASK(14, 8) |
| #define YT8821_UTP_EXT_TRACE_MED_GAIN_THE_2500 GENMASK(6, 0) |
| |
| #define YT8821_UTP_EXT_ALPHA_IPR_CTRL_REG 0x374 |
| #define YT8821_UTP_EXT_ALPHA_SHT_2500 GENMASK(14, 8) |
| #define YT8821_UTP_EXT_IPR_LNG_2500 GENMASK(6, 0) |
| |
| #define YT8821_UTP_EXT_PLL_CTRL_REG 0x450 |
| #define YT8821_UTP_EXT_PLL_SPARE_CFG GENMASK(7, 0) |
| |
| #define YT8821_UTP_EXT_DAC_IMID_CH_2_3_CTRL_REG 0x466 |
| #define YT8821_UTP_EXT_DAC_IMID_CH_3_10_ORG GENMASK(14, 8) |
| #define YT8821_UTP_EXT_DAC_IMID_CH_2_10_ORG GENMASK(6, 0) |
| |
| #define YT8821_UTP_EXT_DAC_IMID_CH_0_1_CTRL_REG 0x467 |
| #define YT8821_UTP_EXT_DAC_IMID_CH_1_10_ORG GENMASK(14, 8) |
| #define YT8821_UTP_EXT_DAC_IMID_CH_0_10_ORG GENMASK(6, 0) |
| |
| #define YT8821_UTP_EXT_DAC_IMSB_CH_2_3_CTRL_REG 0x468 |
| #define YT8821_UTP_EXT_DAC_IMSB_CH_3_10_ORG GENMASK(14, 8) |
| #define YT8821_UTP_EXT_DAC_IMSB_CH_2_10_ORG GENMASK(6, 0) |
| |
| #define YT8821_UTP_EXT_DAC_IMSB_CH_0_1_CTRL_REG 0x469 |
| #define YT8821_UTP_EXT_DAC_IMSB_CH_1_10_ORG GENMASK(14, 8) |
| #define YT8821_UTP_EXT_DAC_IMSB_CH_0_10_ORG GENMASK(6, 0) |
| |
| #define YT8821_UTP_EXT_MU_COARSE_FR_CTRL_REG 0x4B3 |
| #define YT8821_UTP_EXT_MU_COARSE_FR_F_FFE GENMASK(14, 12) |
| #define YT8821_UTP_EXT_MU_COARSE_FR_F_FBE GENMASK(10, 8) |
| |
| #define YT8821_UTP_EXT_MU_FINE_FR_CTRL_REG 0x4B5 |
| #define YT8821_UTP_EXT_MU_FINE_FR_F_FFE GENMASK(14, 12) |
| #define YT8821_UTP_EXT_MU_FINE_FR_F_FBE GENMASK(10, 8) |
| |
| #define YT8821_UTP_EXT_VGA_LPF1_CAP_CTRL_REG 0x4D2 |
| #define YT8821_UTP_EXT_VGA_LPF1_CAP_OTHER GENMASK(7, 4) |
| #define YT8821_UTP_EXT_VGA_LPF1_CAP_2500 GENMASK(3, 0) |
| |
| #define YT8821_UTP_EXT_VGA_LPF2_CAP_CTRL_REG 0x4D3 |
| #define YT8821_UTP_EXT_VGA_LPF2_CAP_OTHER GENMASK(7, 4) |
| #define YT8821_UTP_EXT_VGA_LPF2_CAP_2500 GENMASK(3, 0) |
| |
| #define YT8821_UTP_EXT_TXGE_NFR_FR_THP_CTRL_REG 0x660 |
| #define YT8821_UTP_EXT_NFR_TX_ABILITY BIT(3) |
| |
| #define YT8821_CHIP_MODE_FORCE_BX2500 1 |
| |
| /* chip config register */ |
| #define YTPHY_CCR_MODE_SEL_MASK GENMASK(2, 0) |
| |
| #define YTPHY_REG_SPACE_SELECT_REG 0xA000 |
| #define YTPHY_RSSR_SPACE_MASK BIT(1) |
| #define YTPHY_RSSR_FIBER_SPACE (0x1 << 1) |
| #define YTPHY_RSSR_UTP_SPACE (0x0 << 1) |
| |
| struct ytphy_plat_priv { |
| u32 rx_delay_ps; |
| u32 tx_delay_ps; |
| u32 clk_out_frequency; |
| u32 flag; |
| }; |
| |
| /** |
| * struct ytphy_cfg_reg_map - map a config value to a register value |
| * @cfg: value in device configuration |
| * @reg: value in the register |
| */ |
| struct ytphy_cfg_reg_map { |
| u32 cfg; |
| u32 reg; |
| }; |
| |
| static const struct ytphy_cfg_reg_map ytphy_rgmii_delays[] = { |
| /* for tx delay / rx delay with YT8531_CCR_RXC_DLY_EN is not set. */ |
| { 0, YT8531_RC1R_RGMII_0_000_NS }, |
| { 150, YT8531_RC1R_RGMII_0_150_NS }, |
| { 300, YT8531_RC1R_RGMII_0_300_NS }, |
| { 450, YT8531_RC1R_RGMII_0_450_NS }, |
| { 600, YT8531_RC1R_RGMII_0_600_NS }, |
| { 750, YT8531_RC1R_RGMII_0_750_NS }, |
| { 900, YT8531_RC1R_RGMII_0_900_NS }, |
| { 1050, YT8531_RC1R_RGMII_1_050_NS }, |
| { 1200, YT8531_RC1R_RGMII_1_200_NS }, |
| { 1350, YT8531_RC1R_RGMII_1_350_NS }, |
| { 1500, YT8531_RC1R_RGMII_1_500_NS }, |
| { 1650, YT8531_RC1R_RGMII_1_650_NS }, |
| { 1800, YT8531_RC1R_RGMII_1_800_NS }, |
| { 1950, YT8531_RC1R_RGMII_1_950_NS }, /* default tx/rx delay */ |
| { 2100, YT8531_RC1R_RGMII_2_100_NS }, |
| { 2250, YT8531_RC1R_RGMII_2_250_NS }, |
| |
| /* only for rx delay with YT8531_CCR_RXC_DLY_EN is set. */ |
| { 0 + YT8531_CCR_RXC_DLY_1_900_NS, YT8531_RC1R_RGMII_0_000_NS }, |
| { 150 + YT8531_CCR_RXC_DLY_1_900_NS, YT8531_RC1R_RGMII_0_150_NS }, |
| { 300 + YT8531_CCR_RXC_DLY_1_900_NS, YT8531_RC1R_RGMII_0_300_NS }, |
| { 450 + YT8531_CCR_RXC_DLY_1_900_NS, YT8531_RC1R_RGMII_0_450_NS }, |
| { 600 + YT8531_CCR_RXC_DLY_1_900_NS, YT8531_RC1R_RGMII_0_600_NS }, |
| { 750 + YT8531_CCR_RXC_DLY_1_900_NS, YT8531_RC1R_RGMII_0_750_NS }, |
| { 900 + YT8531_CCR_RXC_DLY_1_900_NS, YT8531_RC1R_RGMII_0_900_NS }, |
| { 1050 + YT8531_CCR_RXC_DLY_1_900_NS, YT8531_RC1R_RGMII_1_050_NS }, |
| { 1200 + YT8531_CCR_RXC_DLY_1_900_NS, YT8531_RC1R_RGMII_1_200_NS }, |
| { 1350 + YT8531_CCR_RXC_DLY_1_900_NS, YT8531_RC1R_RGMII_1_350_NS }, |
| { 1500 + YT8531_CCR_RXC_DLY_1_900_NS, YT8531_RC1R_RGMII_1_500_NS }, |
| { 1650 + YT8531_CCR_RXC_DLY_1_900_NS, YT8531_RC1R_RGMII_1_650_NS }, |
| { 1800 + YT8531_CCR_RXC_DLY_1_900_NS, YT8531_RC1R_RGMII_1_800_NS }, |
| { 1950 + YT8531_CCR_RXC_DLY_1_900_NS, YT8531_RC1R_RGMII_1_950_NS }, |
| { 2100 + YT8531_CCR_RXC_DLY_1_900_NS, YT8531_RC1R_RGMII_2_100_NS }, |
| { 2250 + YT8531_CCR_RXC_DLY_1_900_NS, YT8531_RC1R_RGMII_2_250_NS } |
| }; |
| |
| static u32 ytphy_get_delay_reg_value(struct phy_device *phydev, |
| u32 val, |
| u16 *rxc_dly_en) |
| { |
| int tb_size = ARRAY_SIZE(ytphy_rgmii_delays); |
| int tb_size_half = tb_size / 2; |
| int i; |
| |
| /* when rxc_dly_en is NULL, it is get the delay for tx, only half of |
| * tb_size is valid. |
| */ |
| if (!rxc_dly_en) |
| tb_size = tb_size_half; |
| |
| for (i = 0; i < tb_size; i++) { |
| if (ytphy_rgmii_delays[i].cfg == val) { |
| if (rxc_dly_en && i < tb_size_half) |
| *rxc_dly_en = 0; |
| return ytphy_rgmii_delays[i].reg; |
| } |
| } |
| |
| pr_warn("Unsupported value %d, using default (%u)\n", |
| val, YT8531_RC1R_RGMII_1_950_NS); |
| |
| /* when rxc_dly_en is not NULL, it is get the delay for rx. |
| * The rx default in dts and ytphy_rgmii_clk_delay_config is 1950 ps, |
| * so YT8531_CCR_RXC_DLY_EN should not be set. |
| */ |
| if (rxc_dly_en) |
| *rxc_dly_en = 0; |
| |
| return YT8531_RC1R_RGMII_1_950_NS; |
| } |
| |
| static int ytphy_modify_ext(struct phy_device *phydev, u16 regnum, u16 mask, |
| u16 set) |
| { |
| int ret; |
| |
| ret = phy_write(phydev, MDIO_DEVAD_NONE, YTPHY_PAGE_SELECT, regnum); |
| if (ret < 0) |
| return ret; |
| |
| return phy_modify(phydev, MDIO_DEVAD_NONE, YTPHY_PAGE_DATA, mask, set); |
| } |
| |
| static int ytphy_read_ext(struct phy_device *phydev, u16 regnum) |
| { |
| int ret; |
| |
| ret = phy_write(phydev, MDIO_DEVAD_NONE, YTPHY_PAGE_SELECT, regnum); |
| if (ret < 0) |
| return ret; |
| |
| return phy_read(phydev, MDIO_DEVAD_NONE, YTPHY_PAGE_DATA); |
| } |
| |
| static int ytphy_rgmii_clk_delay_config(struct phy_device *phydev) |
| { |
| struct ytphy_plat_priv *priv = phydev->priv; |
| u16 rxc_dly_en = YT8531_CCR_RXC_DLY_EN; |
| u32 rx_reg, tx_reg; |
| u16 mask, val = 0; |
| int ret; |
| |
| rx_reg = ytphy_get_delay_reg_value(phydev, priv->rx_delay_ps, |
| &rxc_dly_en); |
| tx_reg = ytphy_get_delay_reg_value(phydev, priv->tx_delay_ps, |
| NULL); |
| |
| switch (phydev->interface) { |
| case PHY_INTERFACE_MODE_RGMII: |
| rxc_dly_en = 0; |
| break; |
| case PHY_INTERFACE_MODE_RGMII_RXID: |
| val |= FIELD_PREP(YT8531_RC1R_RX_DELAY_MASK, rx_reg); |
| break; |
| case PHY_INTERFACE_MODE_RGMII_TXID: |
| rxc_dly_en = 0; |
| val |= FIELD_PREP(YT8531_RC1R_GE_TX_DELAY_MASK, tx_reg); |
| break; |
| case PHY_INTERFACE_MODE_RGMII_ID: |
| val |= FIELD_PREP(YT8531_RC1R_RX_DELAY_MASK, rx_reg) | |
| FIELD_PREP(YT8531_RC1R_GE_TX_DELAY_MASK, tx_reg); |
| break; |
| default: /* do not support other modes */ |
| return -EOPNOTSUPP; |
| } |
| |
| ret = ytphy_modify_ext(phydev, YT8531_CHIP_CONFIG_REG, |
| YT8531_CCR_RXC_DLY_EN, rxc_dly_en); |
| if (ret < 0) |
| return ret; |
| |
| /* Generally, it is not necessary to adjust YT8531_RC1R_FE_TX_DELAY */ |
| mask = YT8531_RC1R_RX_DELAY_MASK | YT8531_RC1R_GE_TX_DELAY_MASK; |
| return ytphy_modify_ext(phydev, YT8531_RGMII_CONFIG1_REG, mask, val); |
| } |
| |
| static int yt8531_parse_status(struct phy_device *phydev) |
| { |
| int val; |
| int speed, speed_mode; |
| |
| val = phy_read(phydev, MDIO_DEVAD_NONE, YTPHY_SPECIFIC_STATUS_REG); |
| if (val < 0) |
| return val; |
| |
| speed_mode = (val & YTPHY_SPEED_MASK); |
| switch (speed_mode) { |
| case YTPHY_SPEED_1000M: |
| speed = SPEED_1000; |
| break; |
| case YTPHY_SPEED_100M: |
| speed = SPEED_100; |
| break; |
| case YTPHY_SPEED_10M: |
| speed = SPEED_10; |
| break; |
| } |
| |
| phydev->speed = speed; |
| phydev->duplex = (val & YTPHY_DUPLEX_MASK) >> YTPHY_DUPLEX_SHIFT; |
| |
| return 0; |
| } |
| |
| static int yt8531_startup(struct phy_device *phydev) |
| { |
| struct ytphy_plat_priv *priv = phydev->priv; |
| u16 val = 0; |
| int ret; |
| |
| ret = genphy_update_link(phydev); |
| if (ret) |
| return ret; |
| |
| ret = yt8531_parse_status(phydev); |
| if (ret) |
| return ret; |
| |
| if (phydev->speed < 0) |
| return -EINVAL; |
| |
| if (!(priv->flag & TX_CLK_ADJ_ENABLED)) |
| return 0; |
| |
| switch (phydev->speed) { |
| case SPEED_1000: |
| if (priv->flag & TX_CLK_1000_INVERTED) |
| val = YT8531_RC1R_TX_CLK_SEL_INVERTED; |
| break; |
| case SPEED_100: |
| if (priv->flag & TX_CLK_100_INVERTED) |
| val = YT8531_RC1R_TX_CLK_SEL_INVERTED; |
| break; |
| case SPEED_10: |
| if (priv->flag & TX_CLK_10_INVERTED) |
| val = YT8531_RC1R_TX_CLK_SEL_INVERTED; |
| break; |
| default: |
| printf("UNKNOWN SPEED\n"); |
| return -EINVAL; |
| } |
| |
| ret = ytphy_modify_ext(phydev, YT8531_RGMII_CONFIG1_REG, |
| YT8531_RC1R_TX_CLK_SEL_INVERTED, val); |
| if (ret < 0) |
| pr_warn("Modify TX_CLK_SEL err:%d\n", ret); |
| |
| return 0; |
| } |
| |
| static void ytphy_dt_parse(struct phy_device *phydev) |
| { |
| struct ytphy_plat_priv *priv = phydev->priv; |
| |
| priv->clk_out_frequency = ofnode_read_u32_default(phydev->node, |
| "motorcomm,clk-out-frequency-hz", |
| YTPHY_DTS_OUTPUT_CLK_DIS); |
| priv->rx_delay_ps = ofnode_read_u32_default(phydev->node, |
| "rx-internal-delay-ps", |
| YT8531_RC1R_RGMII_1_950_NS); |
| priv->tx_delay_ps = ofnode_read_u32_default(phydev->node, |
| "tx-internal-delay-ps", |
| YT8531_RC1R_RGMII_1_950_NS); |
| |
| if (ofnode_read_bool(phydev->node, "motorcomm,auto-sleep-disabled")) |
| priv->flag |= AUTO_SLEEP_DISABLED; |
| |
| if (ofnode_read_bool(phydev->node, "motorcomm,keep-pll-enabled")) |
| priv->flag |= KEEP_PLL_ENABLED; |
| |
| if (ofnode_read_bool(phydev->node, "motorcomm,tx-clk-adj-enabled")) |
| priv->flag |= TX_CLK_ADJ_ENABLED; |
| |
| if (ofnode_read_bool(phydev->node, "motorcomm,tx-clk-10-inverted")) |
| priv->flag |= TX_CLK_10_INVERTED; |
| |
| if (ofnode_read_bool(phydev->node, "motorcomm,tx-clk-100-inverted")) |
| priv->flag |= TX_CLK_100_INVERTED; |
| |
| if (ofnode_read_bool(phydev->node, "motorcomm,tx-clk-1000-inverted")) |
| priv->flag |= TX_CLK_1000_INVERTED; |
| } |
| |
| static int yt8511_config(struct phy_device *phydev) |
| { |
| u32 ge, fe; |
| int ret; |
| |
| ret = genphy_config_aneg(phydev); |
| if (ret < 0) |
| return ret; |
| |
| switch (phydev->interface) { |
| case PHY_INTERFACE_MODE_RGMII: |
| ge = YT8511_DELAY_GE_TX_DIS; |
| fe = YT8511_DELAY_FE_TX_DIS; |
| break; |
| case PHY_INTERFACE_MODE_RGMII_RXID: |
| ge = YT8511_DELAY_RX | YT8511_DELAY_GE_TX_DIS; |
| fe = YT8511_DELAY_FE_TX_DIS; |
| break; |
| case PHY_INTERFACE_MODE_RGMII_TXID: |
| ge = YT8511_DELAY_GE_TX_EN; |
| fe = YT8511_DELAY_FE_TX_EN; |
| break; |
| case PHY_INTERFACE_MODE_RGMII_ID: |
| ge = YT8511_DELAY_RX | YT8511_DELAY_GE_TX_EN; |
| fe = YT8511_DELAY_FE_TX_EN; |
| break; |
| default: /* do not support other modes */ |
| return -EOPNOTSUPP; |
| } |
| |
| ret = ytphy_modify_ext(phydev, YT8511_EXT_CLK_GATE, |
| (YT8511_DELAY_RX | YT8511_DELAY_GE_TX_EN), ge); |
| if (ret < 0) |
| return ret; |
| /* set clock mode to 125m */ |
| ret = ytphy_modify_ext(phydev, YT8511_EXT_CLK_GATE, |
| YT8511_CLK_125M, YT8511_CLK_125M); |
| if (ret < 0) |
| return ret; |
| ret = ytphy_modify_ext(phydev, YT8511_EXT_DELAY_DRIVE, |
| YT8511_DELAY_FE_TX_EN, fe); |
| if (ret < 0) |
| return ret; |
| /* sleep control, disable PLL in sleep for now */ |
| ret = ytphy_modify_ext(phydev, YT8511_EXT_SLEEP_CTRL, YT8511_PLLON_SLP, |
| 0); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| /** |
| * struct ytphy_ldo_vol_map - map a current value to a register value |
| * @vol: ldo voltage |
| * @ds: value in the register |
| * @cur: value in device configuration |
| */ |
| struct ytphy_ldo_vol_map { |
| u32 vol; |
| u32 ds; |
| u32 cur; |
| }; |
| |
| static const struct ytphy_ldo_vol_map yt8531_ldo_vol[] = { |
| {.vol = YT8531_CCR_CFG_LDO_1V8, .ds = 0, .cur = 1200}, |
| {.vol = YT8531_CCR_CFG_LDO_1V8, .ds = 1, .cur = 2100}, |
| {.vol = YT8531_CCR_CFG_LDO_1V8, .ds = 2, .cur = 2700}, |
| {.vol = YT8531_CCR_CFG_LDO_1V8, .ds = 3, .cur = 2910}, |
| {.vol = YT8531_CCR_CFG_LDO_1V8, .ds = 4, .cur = 3110}, |
| {.vol = YT8531_CCR_CFG_LDO_1V8, .ds = 5, .cur = 3600}, |
| {.vol = YT8531_CCR_CFG_LDO_1V8, .ds = 6, .cur = 3970}, |
| {.vol = YT8531_CCR_CFG_LDO_1V8, .ds = 7, .cur = 4350}, |
| {.vol = YT8531_CCR_CFG_LDO_3V3, .ds = 0, .cur = 3070}, |
| {.vol = YT8531_CCR_CFG_LDO_3V3, .ds = 1, .cur = 4080}, |
| {.vol = YT8531_CCR_CFG_LDO_3V3, .ds = 2, .cur = 4370}, |
| {.vol = YT8531_CCR_CFG_LDO_3V3, .ds = 3, .cur = 4680}, |
| {.vol = YT8531_CCR_CFG_LDO_3V3, .ds = 4, .cur = 5020}, |
| {.vol = YT8531_CCR_CFG_LDO_3V3, .ds = 5, .cur = 5450}, |
| {.vol = YT8531_CCR_CFG_LDO_3V3, .ds = 6, .cur = 5740}, |
| {.vol = YT8531_CCR_CFG_LDO_3V3, .ds = 7, .cur = 6140}, |
| }; |
| |
| static u32 yt8531_get_ldo_vol(struct phy_device *phydev) |
| { |
| u32 val; |
| |
| val = ytphy_read_ext(phydev, YT8531_CHIP_CONFIG_REG); |
| val = FIELD_GET(YT8531_CCR_CFG_LDO_MASK, val); |
| |
| return val <= YT8531_CCR_CFG_LDO_1V8 ? val : YT8531_CCR_CFG_LDO_1V8; |
| } |
| |
| static int yt8531_get_ds_map(struct phy_device *phydev, u32 cur) |
| { |
| u32 vol; |
| int i; |
| |
| vol = yt8531_get_ldo_vol(phydev); |
| for (i = 0; i < ARRAY_SIZE(yt8531_ldo_vol); i++) { |
| if (yt8531_ldo_vol[i].vol == vol && yt8531_ldo_vol[i].cur == cur) |
| return yt8531_ldo_vol[i].ds; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int yt8531_set_ds(struct phy_device *phydev) |
| { |
| u32 ds_field_low, ds_field_hi, val; |
| int ret, ds; |
| |
| /* set rgmii rx clk driver strength */ |
| if (!ofnode_read_u32(phydev->node, "motorcomm,rx-clk-drv-microamp", &val)) { |
| ds = yt8531_get_ds_map(phydev, val); |
| if (ds < 0) { |
| pr_warn("No matching current value was found."); |
| return -EINVAL; |
| } |
| } else { |
| ds = YT8531_RGMII_RX_DS_DEFAULT; |
| } |
| |
| ret = ytphy_modify_ext(phydev, |
| YT8531_PAD_DRIVE_STRENGTH_CFG_REG, |
| YT8531_RGMII_RXC_DS_MASK, |
| FIELD_PREP(YT8531_RGMII_RXC_DS_MASK, ds)); |
| if (ret < 0) |
| return ret; |
| |
| /* set rgmii rx data driver strength */ |
| if (!ofnode_read_u32(phydev->node, "motorcomm,rx-data-drv-microamp", &val)) { |
| ds = yt8531_get_ds_map(phydev, val); |
| if (ds < 0) { |
| pr_warn("No matching current value was found."); |
| return -EINVAL; |
| } |
| } else { |
| ds = YT8531_RGMII_RX_DS_DEFAULT; |
| } |
| |
| ds_field_hi = FIELD_GET(BIT(2), ds); |
| ds_field_hi = FIELD_PREP(YT8531_RGMII_RXD_DS_HI_MASK, ds_field_hi); |
| |
| ds_field_low = FIELD_GET(GENMASK(1, 0), ds); |
| ds_field_low = FIELD_PREP(YT8531_RGMII_RXD_DS_LOW_MASK, ds_field_low); |
| |
| ret = ytphy_modify_ext(phydev, |
| YT8531_PAD_DRIVE_STRENGTH_CFG_REG, |
| YT8531_RGMII_RXD_DS_LOW_MASK | YT8531_RGMII_RXD_DS_HI_MASK, |
| ds_field_low | ds_field_hi); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int yt8531_config(struct phy_device *phydev) |
| { |
| struct ytphy_plat_priv *priv = phydev->priv; |
| u16 mask, val; |
| int ret; |
| |
| ret = genphy_config_aneg(phydev); |
| if (ret < 0) |
| return ret; |
| |
| ytphy_dt_parse(phydev); |
| switch (priv->clk_out_frequency) { |
| case YTPHY_DTS_OUTPUT_CLK_DIS: |
| mask = YT8531_SCR_SYNCE_ENABLE; |
| val = 0; |
| break; |
| case YTPHY_DTS_OUTPUT_CLK_25M: |
| mask = YT8531_SCR_SYNCE_ENABLE | YT8531_SCR_CLK_SRC_MASK | |
| YT8531_SCR_CLK_FRE_SEL_125M; |
| val = YT8531_SCR_SYNCE_ENABLE | |
| FIELD_PREP(YT8531_SCR_CLK_SRC_MASK, |
| YT8531_SCR_CLK_SRC_REF_25M); |
| break; |
| case YTPHY_DTS_OUTPUT_CLK_125M: |
| mask = YT8531_SCR_SYNCE_ENABLE | YT8531_SCR_CLK_SRC_MASK | |
| YT8531_SCR_CLK_FRE_SEL_125M; |
| val = YT8531_SCR_SYNCE_ENABLE | YT8531_SCR_CLK_FRE_SEL_125M | |
| FIELD_PREP(YT8531_SCR_CLK_SRC_MASK, |
| YT8531_SCR_CLK_SRC_PLL_125M); |
| break; |
| default: |
| pr_warn("Freq err:%u\n", priv->clk_out_frequency); |
| return -EINVAL; |
| } |
| |
| ret = ytphy_modify_ext(phydev, YTPHY_SYNCE_CFG_REG, mask, |
| val); |
| if (ret < 0) |
| return ret; |
| |
| ret = ytphy_rgmii_clk_delay_config(phydev); |
| if (ret < 0) |
| return ret; |
| |
| if (priv->flag & AUTO_SLEEP_DISABLED) { |
| /* disable auto sleep */ |
| ret = ytphy_modify_ext(phydev, |
| YT8531_EXTREG_SLEEP_CONTROL1_REG, |
| YT8531_ESC1R_SLEEP_SW, 0); |
| if (ret < 0) |
| return ret; |
| } |
| |
| if (priv->flag & KEEP_PLL_ENABLED) { |
| /* enable RXC clock when no wire plug */ |
| ret = ytphy_modify_ext(phydev, |
| YT8531_CLOCK_GATING_REG, |
| YT8531_CGR_RX_CLK_EN, 0); |
| if (ret < 0) |
| return ret; |
| } |
| |
| ret = yt8531_set_ds(phydev); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int yt8531_probe(struct phy_device *phydev) |
| { |
| struct ytphy_plat_priv *priv; |
| |
| priv = calloc(1, sizeof(struct ytphy_plat_priv)); |
| if (!priv) |
| return -ENOMEM; |
| |
| phydev->priv = priv; |
| |
| return 0; |
| } |
| |
| static int ytphy_save_page(struct phy_device *phydev) |
| { |
| int old_page; |
| |
| old_page = ytphy_read_ext(phydev, YTPHY_REG_SPACE_SELECT_REG); |
| if (old_page < 0) |
| return old_page; |
| |
| if ((old_page & YTPHY_RSSR_SPACE_MASK) == YTPHY_RSSR_FIBER_SPACE) |
| return YTPHY_RSSR_FIBER_SPACE; |
| |
| return YTPHY_RSSR_UTP_SPACE; |
| }; |
| |
| static int ytphy_restore_page(struct phy_device *phydev, int page, |
| int ret) |
| { |
| int mask = YTPHY_RSSR_SPACE_MASK; |
| int set; |
| int r; |
| |
| if ((page & YTPHY_RSSR_SPACE_MASK) == YTPHY_RSSR_FIBER_SPACE) |
| set = YTPHY_RSSR_FIBER_SPACE; |
| else |
| set = YTPHY_RSSR_UTP_SPACE; |
| |
| r = ytphy_modify_ext(phydev, YTPHY_REG_SPACE_SELECT_REG, mask, |
| set); |
| if (ret >= 0 && r < 0) |
| ret = r; |
| |
| return ret; |
| }; |
| |
| static int ytphy_write_ext(struct phy_device *phydev, u16 regnum, |
| u16 val) |
| { |
| int ret; |
| |
| ret = phy_write(phydev, MDIO_DEVAD_NONE, |
| YTPHY_PAGE_SELECT, regnum); |
| if (ret < 0) |
| return ret; |
| |
| return phy_write(phydev, MDIO_DEVAD_NONE, YTPHY_PAGE_DATA, val); |
| } |
| |
| static int yt8821_probe(struct phy_device *phydev) |
| { |
| phydev->advertising = PHY_GBIT_FEATURES | |
| SUPPORTED_2500baseX_Full | |
| SUPPORTED_Pause | |
| SUPPORTED_Asym_Pause; |
| phydev->supported = phydev->advertising; |
| |
| return 0; |
| } |
| |
| static int yt8821_serdes_init(struct phy_device *phydev) |
| { |
| int old_page; |
| u16 mask; |
| u16 set; |
| int ret; |
| |
| old_page = ytphy_save_page(phydev); |
| if (old_page < 0) |
| return old_page; |
| |
| ret = ytphy_modify_ext(phydev, YTPHY_REG_SPACE_SELECT_REG, |
| YTPHY_RSSR_SPACE_MASK, |
| YTPHY_RSSR_FIBER_SPACE); |
| if (ret < 0) |
| goto err_restore_page; |
| |
| ret = phy_modify(phydev, MDIO_DEVAD_NONE, MII_BMCR, |
| BMCR_ANENABLE, 0); |
| if (ret < 0) |
| goto err_restore_page; |
| |
| mask = YT8821_SDS_EXT_CSR_VCO_LDO_EN | |
| YT8821_SDS_EXT_CSR_VCO_BIAS_LPF_EN; |
| set = YT8821_SDS_EXT_CSR_VCO_LDO_EN; |
| ret = ytphy_modify_ext(phydev, YT8821_SDS_EXT_CSR_CTRL_REG, mask, |
| set); |
| |
| err_restore_page: |
| return ytphy_restore_page(phydev, old_page, ret); |
| } |
| |
| static int yt8821_utp_init(struct phy_device *phydev) |
| { |
| int old_page; |
| u16 mask; |
| u16 save; |
| u16 set; |
| int ret; |
| |
| old_page = ytphy_save_page(phydev); |
| if (old_page < 0) |
| return old_page; |
| |
| ret = ytphy_modify_ext(phydev, YTPHY_REG_SPACE_SELECT_REG, |
| YTPHY_RSSR_SPACE_MASK, |
| YTPHY_RSSR_UTP_SPACE); |
| if (ret < 0) |
| goto err_restore_page; |
| |
| mask = YT8821_UTP_EXT_RPDN_BP_FFE_LNG_2500 | |
| YT8821_UTP_EXT_RPDN_BP_FFE_SHT_2500 | |
| YT8821_UTP_EXT_RPDN_IPR_SHT_2500; |
| set = YT8821_UTP_EXT_RPDN_BP_FFE_LNG_2500 | |
| YT8821_UTP_EXT_RPDN_BP_FFE_SHT_2500; |
| ret = ytphy_modify_ext(phydev, YT8821_UTP_EXT_RPDN_CTRL_REG, |
| mask, set); |
| if (ret < 0) |
| goto err_restore_page; |
| |
| mask = YT8821_UTP_EXT_VGA_LPF1_CAP_OTHER | |
| YT8821_UTP_EXT_VGA_LPF1_CAP_2500; |
| ret = ytphy_modify_ext(phydev, |
| YT8821_UTP_EXT_VGA_LPF1_CAP_CTRL_REG, |
| mask, 0); |
| if (ret < 0) |
| goto err_restore_page; |
| |
| mask = YT8821_UTP_EXT_VGA_LPF2_CAP_OTHER | |
| YT8821_UTP_EXT_VGA_LPF2_CAP_2500; |
| ret = ytphy_modify_ext(phydev, |
| YT8821_UTP_EXT_VGA_LPF2_CAP_CTRL_REG, |
| mask, 0); |
| if (ret < 0) |
| goto err_restore_page; |
| |
| mask = YT8821_UTP_EXT_TRACE_LNG_GAIN_THE_2500 | |
| YT8821_UTP_EXT_TRACE_MED_GAIN_THE_2500; |
| set = FIELD_PREP(YT8821_UTP_EXT_TRACE_LNG_GAIN_THE_2500, 0x5a) | |
| FIELD_PREP(YT8821_UTP_EXT_TRACE_MED_GAIN_THE_2500, 0x3c); |
| ret = ytphy_modify_ext(phydev, YT8821_UTP_EXT_TRACE_CTRL_REG, |
| mask, set); |
| if (ret < 0) |
| goto err_restore_page; |
| |
| mask = YT8821_UTP_EXT_IPR_LNG_2500; |
| set = FIELD_PREP(YT8821_UTP_EXT_IPR_LNG_2500, 0x6c); |
| ret = ytphy_modify_ext(phydev, |
| YT8821_UTP_EXT_ALPHA_IPR_CTRL_REG, |
| mask, set); |
| if (ret < 0) |
| goto err_restore_page; |
| |
| mask = YT8821_UTP_EXT_TRACE_LNG_GAIN_THR_1000; |
| set = FIELD_PREP(YT8821_UTP_EXT_TRACE_LNG_GAIN_THR_1000, 0x2a); |
| ret = ytphy_modify_ext(phydev, YT8821_UTP_EXT_ECHO_CTRL_REG, |
| mask, set); |
| if (ret < 0) |
| goto err_restore_page; |
| |
| mask = YT8821_UTP_EXT_TRACE_MED_GAIN_THR_1000; |
| set = FIELD_PREP(YT8821_UTP_EXT_TRACE_MED_GAIN_THR_1000, 0x22); |
| ret = ytphy_modify_ext(phydev, YT8821_UTP_EXT_GAIN_CTRL_REG, |
| mask, set); |
| if (ret < 0) |
| goto err_restore_page; |
| |
| mask = YT8821_UTP_EXT_TH_20DB_2500; |
| set = FIELD_PREP(YT8821_UTP_EXT_TH_20DB_2500, 0x8000); |
| ret = ytphy_modify_ext(phydev, |
| YT8821_UTP_EXT_TH_20DB_2500_CTRL_REG, |
| mask, set); |
| if (ret < 0) |
| goto err_restore_page; |
| |
| mask = YT8821_UTP_EXT_MU_COARSE_FR_F_FFE | |
| YT8821_UTP_EXT_MU_COARSE_FR_F_FBE; |
| set = FIELD_PREP(YT8821_UTP_EXT_MU_COARSE_FR_F_FFE, 0x7) | |
| FIELD_PREP(YT8821_UTP_EXT_MU_COARSE_FR_F_FBE, 0x7); |
| ret = ytphy_modify_ext(phydev, |
| YT8821_UTP_EXT_MU_COARSE_FR_CTRL_REG, |
| mask, set); |
| if (ret < 0) |
| goto err_restore_page; |
| |
| mask = YT8821_UTP_EXT_MU_FINE_FR_F_FFE | |
| YT8821_UTP_EXT_MU_FINE_FR_F_FBE; |
| set = FIELD_PREP(YT8821_UTP_EXT_MU_FINE_FR_F_FFE, 0x2) | |
| FIELD_PREP(YT8821_UTP_EXT_MU_FINE_FR_F_FBE, 0x2); |
| ret = ytphy_modify_ext(phydev, |
| YT8821_UTP_EXT_MU_FINE_FR_CTRL_REG, |
| mask, set); |
| if (ret < 0) |
| goto err_restore_page; |
| |
| /* save YT8821_UTP_EXT_PI_CTRL_REG's val for use later */ |
| ret = ytphy_read_ext(phydev, YT8821_UTP_EXT_PI_CTRL_REG); |
| if (ret < 0) |
| goto err_restore_page; |
| |
| save = ret; |
| |
| mask = YT8821_UTP_EXT_PI_TX_CLK_SEL_AFE | |
| YT8821_UTP_EXT_PI_RX_CLK_3_SEL_AFE | |
| YT8821_UTP_EXT_PI_RX_CLK_2_SEL_AFE | |
| YT8821_UTP_EXT_PI_RX_CLK_1_SEL_AFE | |
| YT8821_UTP_EXT_PI_RX_CLK_0_SEL_AFE; |
| ret = ytphy_modify_ext(phydev, YT8821_UTP_EXT_PI_CTRL_REG, |
| mask, 0); |
| if (ret < 0) |
| goto err_restore_page; |
| |
| /* restore YT8821_UTP_EXT_PI_CTRL_REG's val */ |
| ret = ytphy_write_ext(phydev, YT8821_UTP_EXT_PI_CTRL_REG, save); |
| if (ret < 0) |
| goto err_restore_page; |
| |
| mask = YT8821_UTP_EXT_FECHO_AMP_TH_HUGE; |
| set = FIELD_PREP(YT8821_UTP_EXT_FECHO_AMP_TH_HUGE, 0x38); |
| ret = ytphy_modify_ext(phydev, YT8821_UTP_EXT_VCT_CFG6_CTRL_REG, |
| mask, set); |
| if (ret < 0) |
| goto err_restore_page; |
| |
| mask = YT8821_UTP_EXT_NFR_TX_ABILITY; |
| set = YT8821_UTP_EXT_NFR_TX_ABILITY; |
| ret = ytphy_modify_ext(phydev, |
| YT8821_UTP_EXT_TXGE_NFR_FR_THP_CTRL_REG, |
| mask, set); |
| if (ret < 0) |
| goto err_restore_page; |
| |
| mask = YT8821_UTP_EXT_PLL_SPARE_CFG; |
| set = FIELD_PREP(YT8821_UTP_EXT_PLL_SPARE_CFG, 0xe9); |
| ret = ytphy_modify_ext(phydev, YT8821_UTP_EXT_PLL_CTRL_REG, |
| mask, set); |
| if (ret < 0) |
| goto err_restore_page; |
| |
| mask = YT8821_UTP_EXT_DAC_IMID_CH_3_10_ORG | |
| YT8821_UTP_EXT_DAC_IMID_CH_2_10_ORG; |
| set = FIELD_PREP(YT8821_UTP_EXT_DAC_IMID_CH_3_10_ORG, 0x64) | |
| FIELD_PREP(YT8821_UTP_EXT_DAC_IMID_CH_2_10_ORG, 0x64); |
| ret = ytphy_modify_ext(phydev, |
| YT8821_UTP_EXT_DAC_IMID_CH_2_3_CTRL_REG, |
| mask, set); |
| if (ret < 0) |
| goto err_restore_page; |
| |
| mask = YT8821_UTP_EXT_DAC_IMID_CH_1_10_ORG | |
| YT8821_UTP_EXT_DAC_IMID_CH_0_10_ORG; |
| set = FIELD_PREP(YT8821_UTP_EXT_DAC_IMID_CH_1_10_ORG, 0x64) | |
| FIELD_PREP(YT8821_UTP_EXT_DAC_IMID_CH_0_10_ORG, 0x64); |
| ret = ytphy_modify_ext(phydev, |
| YT8821_UTP_EXT_DAC_IMID_CH_0_1_CTRL_REG, |
| mask, set); |
| if (ret < 0) |
| goto err_restore_page; |
| |
| mask = YT8821_UTP_EXT_DAC_IMSB_CH_3_10_ORG | |
| YT8821_UTP_EXT_DAC_IMSB_CH_2_10_ORG; |
| set = FIELD_PREP(YT8821_UTP_EXT_DAC_IMSB_CH_3_10_ORG, 0x64) | |
| FIELD_PREP(YT8821_UTP_EXT_DAC_IMSB_CH_2_10_ORG, 0x64); |
| ret = ytphy_modify_ext(phydev, |
| YT8821_UTP_EXT_DAC_IMSB_CH_2_3_CTRL_REG, |
| mask, set); |
| if (ret < 0) |
| goto err_restore_page; |
| |
| mask = YT8821_UTP_EXT_DAC_IMSB_CH_1_10_ORG | |
| YT8821_UTP_EXT_DAC_IMSB_CH_0_10_ORG; |
| set = FIELD_PREP(YT8821_UTP_EXT_DAC_IMSB_CH_1_10_ORG, 0x64) | |
| FIELD_PREP(YT8821_UTP_EXT_DAC_IMSB_CH_0_10_ORG, 0x64); |
| ret = ytphy_modify_ext(phydev, |
| YT8821_UTP_EXT_DAC_IMSB_CH_0_1_CTRL_REG, |
| mask, set); |
| |
| err_restore_page: |
| return ytphy_restore_page(phydev, old_page, ret); |
| } |
| |
| static int yt8821_auto_sleep_config(struct phy_device *phydev, |
| bool enable) |
| { |
| int old_page; |
| int ret; |
| |
| old_page = ytphy_save_page(phydev); |
| if (old_page < 0) |
| return old_page; |
| |
| ret = ytphy_modify_ext(phydev, YTPHY_REG_SPACE_SELECT_REG, |
| YTPHY_RSSR_SPACE_MASK, |
| YTPHY_RSSR_UTP_SPACE); |
| if (ret < 0) |
| goto err_restore_page; |
| |
| ret = ytphy_modify_ext(phydev, |
| YT8531_EXTREG_SLEEP_CONTROL1_REG, |
| YT8531_ESC1R_SLEEP_SW, |
| enable ? 1 : 0); |
| |
| err_restore_page: |
| return ytphy_restore_page(phydev, old_page, ret); |
| } |
| |
| static int yt8821_soft_reset(struct phy_device *phydev) |
| { |
| return ytphy_modify_ext(phydev, YT8531_CHIP_CONFIG_REG, |
| YT8531_CCR_SW_RST, 0); |
| } |
| |
| static int yt8821_config(struct phy_device *phydev) |
| { |
| u8 mode = YT8821_CHIP_MODE_FORCE_BX2500; |
| int ret; |
| u16 set; |
| |
| set = FIELD_PREP(YTPHY_CCR_MODE_SEL_MASK, mode); |
| ret = ytphy_modify_ext(phydev, |
| YT8531_CHIP_CONFIG_REG, |
| YTPHY_CCR_MODE_SEL_MASK, |
| set); |
| if (ret < 0) |
| return ret; |
| |
| ret = yt8821_serdes_init(phydev); |
| if (ret < 0) |
| return ret; |
| |
| ret = yt8821_utp_init(phydev); |
| if (ret < 0) |
| return ret; |
| |
| ret = yt8821_auto_sleep_config(phydev, false); |
| if (ret < 0) |
| return ret; |
| |
| return yt8821_soft_reset(phydev); |
| } |
| |
| static void yt8821_parse_status(struct phy_device *phydev, int val) |
| { |
| int speed_mode; |
| int speed; |
| |
| speed_mode = val & YTPHY_SPEED_MASK; |
| switch (speed_mode) { |
| case YTPHY_SPEED_2500M: |
| speed = SPEED_2500; |
| break; |
| case YTPHY_SPEED_1000M: |
| speed = SPEED_1000; |
| break; |
| case YTPHY_SPEED_100M: |
| speed = SPEED_100; |
| break; |
| case YTPHY_SPEED_10M: |
| speed = SPEED_10; |
| break; |
| } |
| |
| phydev->speed = speed; |
| phydev->duplex = FIELD_GET(YTPHY_DUPLEX_MASK, val); |
| } |
| |
| static int yt8821_startup(struct phy_device *phydev) |
| { |
| u16 val; |
| int ret; |
| |
| ret = ytphy_modify_ext(phydev, YTPHY_REG_SPACE_SELECT_REG, |
| YTPHY_RSSR_SPACE_MASK, |
| YTPHY_RSSR_UTP_SPACE); |
| if (ret) |
| return ret; |
| |
| ret = genphy_update_link(phydev); |
| if (ret) |
| return ret; |
| |
| ret = phy_read(phydev, MDIO_DEVAD_NONE, |
| YTPHY_SPECIFIC_STATUS_REG); |
| if (ret < 0) |
| return ret; |
| |
| val = ret; |
| |
| if (phydev->link) |
| yt8821_parse_status(phydev, val); |
| |
| return 0; |
| } |
| |
| U_BOOT_PHY_DRIVER(motorcomm8511) = { |
| .name = "YT8511 Gigabit Ethernet", |
| .uid = PHY_ID_YT8511, |
| .mask = PHY_ID_MASK, |
| .features = PHY_GBIT_FEATURES, |
| .config = &yt8511_config, |
| .startup = &genphy_startup, |
| .shutdown = &genphy_shutdown, |
| }; |
| |
| U_BOOT_PHY_DRIVER(motorcomm8531) = { |
| .name = "YT8531 Gigabit Ethernet", |
| .uid = PHY_ID_YT8531, |
| .mask = PHY_ID_MASK, |
| .features = PHY_GBIT_FEATURES, |
| .probe = &yt8531_probe, |
| .config = &yt8531_config, |
| .startup = &yt8531_startup, |
| .shutdown = &genphy_shutdown, |
| }; |
| |
| U_BOOT_PHY_DRIVER(motorcomm8821) = { |
| .name = "YT8821 2.5G Ethernet", |
| .uid = PHY_ID_YT8821, |
| .mask = PHY_ID_MASK, |
| .mmds = (MDIO_MMD_PMAPMD | MDIO_MMD_PCS | MDIO_MMD_AN), |
| .probe = &yt8821_probe, |
| .config = &yt8821_config, |
| .startup = &yt8821_startup, |
| .shutdown = &genphy_shutdown, |
| }; |