blob: f76fee3ea0f568082e5543eb07675464a45c23e0 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2009 SAMSUNG Electronics
* Minkyu Kang <mk7.kang@samsung.com>
* Jaehoon Chung <jh80.chung@samsung.com>
* Portions Copyright 2011-2019 NVIDIA Corporation
*/
#include <bouncebuf.h>
#include <common.h>
#include <dm.h>
#include <errno.h>
#include <log.h>
#include <mmc.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/arch-tegra/tegra_mmc.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/err.h>
#if defined(CONFIG_TEGRA30) || defined(CONFIG_TEGRA210)
#include <asm/arch/clock.h>
#endif
struct tegra_mmc_plat {
struct mmc_config cfg;
struct mmc mmc;
};
struct tegra_mmc_priv {
struct tegra_mmc *reg;
struct reset_ctl reset_ctl;
struct clk clk;
struct gpio_desc cd_gpio; /* Change Detect GPIO */
struct gpio_desc pwr_gpio; /* Power GPIO */
struct gpio_desc wp_gpio; /* Write Protect GPIO */
unsigned int version; /* SDHCI spec. version */
unsigned int clock; /* Current clock (MHz) */
int mmc_id; /* peripheral id */
};
static void tegra_mmc_set_power(struct tegra_mmc_priv *priv,
unsigned short power)
{
u8 pwr = 0;
debug("%s: power = %x\n", __func__, power);
if (power != (unsigned short)-1) {
switch (1 << power) {
case MMC_VDD_165_195:
pwr = TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V1_8;
break;
case MMC_VDD_29_30:
case MMC_VDD_30_31:
pwr = TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V3_0;
break;
case MMC_VDD_32_33:
case MMC_VDD_33_34:
pwr = TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V3_3;
break;
}
}
debug("%s: pwr = %X\n", __func__, pwr);
/* Set the bus voltage first (if any) */
writeb(pwr, &priv->reg->pwrcon);
if (pwr == 0)
return;
/* Now enable bus power */
pwr |= TEGRA_MMC_PWRCTL_SD_BUS_POWER;
writeb(pwr, &priv->reg->pwrcon);
}
static void tegra_mmc_prepare_data(struct tegra_mmc_priv *priv,
struct mmc_data *data,
struct bounce_buffer *bbstate)
{
unsigned char ctrl;
debug("buf: %p (%p), data->blocks: %u, data->blocksize: %u\n",
bbstate->bounce_buffer, bbstate->user_buffer, data->blocks,
data->blocksize);
writel((u32)(unsigned long)bbstate->bounce_buffer, &priv->reg->sysad);
/*
* DMASEL[4:3]
* 00 = Selects SDMA
* 01 = Reserved
* 10 = Selects 32-bit Address ADMA2
* 11 = Selects 64-bit Address ADMA2
*/
ctrl = readb(&priv->reg->hostctl);
ctrl &= ~TEGRA_MMC_HOSTCTL_DMASEL_MASK;
ctrl |= TEGRA_MMC_HOSTCTL_DMASEL_SDMA;
writeb(ctrl, &priv->reg->hostctl);
/* We do not handle DMA boundaries, so set it to max (512 KiB) */
writew((7 << 12) | (data->blocksize & 0xFFF), &priv->reg->blksize);
writew(data->blocks, &priv->reg->blkcnt);
}
static void tegra_mmc_set_transfer_mode(struct tegra_mmc_priv *priv,
struct mmc_data *data)
{
unsigned short mode;
debug(" mmc_set_transfer_mode called\n");
/*
* TRNMOD
* MUL1SIN0[5] : Multi/Single Block Select
* RD1WT0[4] : Data Transfer Direction Select
* 1 = read
* 0 = write
* ENACMD12[2] : Auto CMD12 Enable
* ENBLKCNT[1] : Block Count Enable
* ENDMA[0] : DMA Enable
*/
mode = (TEGRA_MMC_TRNMOD_DMA_ENABLE |
TEGRA_MMC_TRNMOD_BLOCK_COUNT_ENABLE);
if (data->blocks > 1)
mode |= TEGRA_MMC_TRNMOD_MULTI_BLOCK_SELECT;
if (data->flags & MMC_DATA_READ)
mode |= TEGRA_MMC_TRNMOD_DATA_XFER_DIR_SEL_READ;
writew(mode, &priv->reg->trnmod);
}
static int tegra_mmc_wait_inhibit(struct tegra_mmc_priv *priv,
struct mmc_cmd *cmd,
struct mmc_data *data,
unsigned int timeout)
{
/*
* PRNSTS
* CMDINHDAT[1] : Command Inhibit (DAT)
* CMDINHCMD[0] : Command Inhibit (CMD)
*/
unsigned int mask = TEGRA_MMC_PRNSTS_CMD_INHIBIT_CMD;
/*
* We shouldn't wait for data inhibit for stop commands, even
* though they might use busy signaling
*/
if ((data == NULL) && (cmd->resp_type & MMC_RSP_BUSY))
mask |= TEGRA_MMC_PRNSTS_CMD_INHIBIT_DAT;
while (readl(&priv->reg->prnsts) & mask) {
if (timeout == 0) {
printf("%s: timeout error\n", __func__);
return -1;
}
timeout--;
udelay(1000);
}
return 0;
}
static int tegra_mmc_send_cmd_bounced(struct udevice *dev, struct mmc_cmd *cmd,
struct mmc_data *data,
struct bounce_buffer *bbstate)
{
struct tegra_mmc_priv *priv = dev_get_priv(dev);
int flags, i;
int result;
unsigned int mask = 0;
unsigned int retry = 0x100000;
debug(" mmc_send_cmd called\n");
result = tegra_mmc_wait_inhibit(priv, cmd, data, 10 /* ms */);
if (result < 0)
return result;
if (data)
tegra_mmc_prepare_data(priv, data, bbstate);
debug("cmd->arg: %08x\n", cmd->cmdarg);
writel(cmd->cmdarg, &priv->reg->argument);
if (data)
tegra_mmc_set_transfer_mode(priv, data);
if ((cmd->resp_type & MMC_RSP_136) && (cmd->resp_type & MMC_RSP_BUSY))
return -1;
/*
* CMDREG
* CMDIDX[13:8] : Command index
* DATAPRNT[5] : Data Present Select
* ENCMDIDX[4] : Command Index Check Enable
* ENCMDCRC[3] : Command CRC Check Enable
* RSPTYP[1:0]
* 00 = No Response
* 01 = Length 136
* 10 = Length 48
* 11 = Length 48 Check busy after response
*/
if (!(cmd->resp_type & MMC_RSP_PRESENT))
flags = TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_NO_RESPONSE;
else if (cmd->resp_type & MMC_RSP_136)
flags = TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_LENGTH_136;
else if (cmd->resp_type & MMC_RSP_BUSY)
flags = TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_LENGTH_48_BUSY;
else
flags = TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_LENGTH_48;
if (cmd->resp_type & MMC_RSP_CRC)
flags |= TEGRA_MMC_TRNMOD_CMD_CRC_CHECK;
if (cmd->resp_type & MMC_RSP_OPCODE)
flags |= TEGRA_MMC_TRNMOD_CMD_INDEX_CHECK;
if (data)
flags |= TEGRA_MMC_TRNMOD_DATA_PRESENT_SELECT_DATA_TRANSFER;
debug("cmd: %d\n", cmd->cmdidx);
writew((cmd->cmdidx << 8) | flags, &priv->reg->cmdreg);
for (i = 0; i < retry; i++) {
mask = readl(&priv->reg->norintsts);
/* Command Complete */
if (mask & TEGRA_MMC_NORINTSTS_CMD_COMPLETE) {
if (!data)
writel(mask, &priv->reg->norintsts);
break;
}
}
if (i == retry) {
printf("%s: waiting for status update\n", __func__);
writel(mask, &priv->reg->norintsts);
return -ETIMEDOUT;
}
if (mask & TEGRA_MMC_NORINTSTS_CMD_TIMEOUT) {
/* Timeout Error */
debug("timeout: %08x cmd %d\n", mask, cmd->cmdidx);
writel(mask, &priv->reg->norintsts);
return -ETIMEDOUT;
} else if (mask & TEGRA_MMC_NORINTSTS_ERR_INTERRUPT) {
/* Error Interrupt */
debug("error: %08x cmd %d\n", mask, cmd->cmdidx);
writel(mask, &priv->reg->norintsts);
return -1;
}
if (cmd->resp_type & MMC_RSP_PRESENT) {
if (cmd->resp_type & MMC_RSP_136) {
/* CRC is stripped so we need to do some shifting. */
for (i = 0; i < 4; i++) {
unsigned long offset = (unsigned long)
(&priv->reg->rspreg3 - i);
cmd->response[i] = readl(offset) << 8;
if (i != 3) {
cmd->response[i] |=
readb(offset - 1);
}
debug("cmd->resp[%d]: %08x\n",
i, cmd->response[i]);
}
} else if (cmd->resp_type & MMC_RSP_BUSY) {
for (i = 0; i < retry; i++) {
/* PRNTDATA[23:20] : DAT[3:0] Line Signal */
if (readl(&priv->reg->prnsts)
& (1 << 20)) /* DAT[0] */
break;
}
if (i == retry) {
printf("%s: card is still busy\n", __func__);
writel(mask, &priv->reg->norintsts);
return -ETIMEDOUT;
}
cmd->response[0] = readl(&priv->reg->rspreg0);
debug("cmd->resp[0]: %08x\n", cmd->response[0]);
} else {
cmd->response[0] = readl(&priv->reg->rspreg0);
debug("cmd->resp[0]: %08x\n", cmd->response[0]);
}
}
if (data) {
unsigned long start = get_timer(0);
while (1) {
mask = readl(&priv->reg->norintsts);
if (mask & TEGRA_MMC_NORINTSTS_ERR_INTERRUPT) {
/* Error Interrupt */
writel(mask, &priv->reg->norintsts);
printf("%s: error during transfer: 0x%08x\n",
__func__, mask);
return -1;
} else if (mask & TEGRA_MMC_NORINTSTS_DMA_INTERRUPT) {
/*
* DMA Interrupt, restart the transfer where
* it was interrupted.
*/
unsigned int address = readl(&priv->reg->sysad);
debug("DMA end\n");
writel(TEGRA_MMC_NORINTSTS_DMA_INTERRUPT,
&priv->reg->norintsts);
writel(address, &priv->reg->sysad);
} else if (mask & TEGRA_MMC_NORINTSTS_XFER_COMPLETE) {
/* Transfer Complete */
debug("r/w is done\n");
break;
} else if (get_timer(start) > 8000UL) {
writel(mask, &priv->reg->norintsts);
printf("%s: MMC Timeout\n"
" Interrupt status 0x%08x\n"
" Interrupt status enable 0x%08x\n"
" Interrupt signal enable 0x%08x\n"
" Present status 0x%08x\n",
__func__, mask,
readl(&priv->reg->norintstsen),
readl(&priv->reg->norintsigen),
readl(&priv->reg->prnsts));
return -1;
}
}
writel(mask, &priv->reg->norintsts);
}
udelay(1000);
return 0;
}
static int tegra_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
struct mmc_data *data)
{
void *buf;
unsigned int bbflags;
size_t len;
struct bounce_buffer bbstate;
int ret;
if (data) {
if (data->flags & MMC_DATA_READ) {
buf = data->dest;
bbflags = GEN_BB_WRITE;
} else {
buf = (void *)data->src;
bbflags = GEN_BB_READ;
}
len = data->blocks * data->blocksize;
bounce_buffer_start(&bbstate, buf, len, bbflags);
}
ret = tegra_mmc_send_cmd_bounced(dev, cmd, data, &bbstate);
if (data)
bounce_buffer_stop(&bbstate);
return ret;
}
static void tegra_mmc_change_clock(struct tegra_mmc_priv *priv, uint clock)
{
ulong rate;
int div;
unsigned short clk;
unsigned long timeout;
debug(" mmc_change_clock called\n");
/*
* Change Tegra SDMMCx clock divisor here. Source is PLLP_OUT0
*/
if (clock == 0)
goto out;
rate = clk_set_rate(&priv->clk, clock);
div = (rate + clock - 1) / clock;
#if defined(CONFIG_TEGRA210)
if (priv->mmc_id == PERIPH_ID_SDMMC1 && clock <= 400000) {
/* clock_adjust_periph_pll_div() chooses a 'bad' clock
* on SDMMC1 T210, so skip it here and force a clock
* that's been spec'd in the table in the TRM for
* card-detect (400KHz).
*/
uint effective_rate = clock_adjust_periph_pll_div(priv->mmc_id,
CLOCK_ID_PERIPH, 24727273, NULL);
div = 62;
debug("%s: WAR: Using SDMMC1 clock of %u, div %d to achieve %dHz card clock ...\n",
__func__, effective_rate, div, clock);
} else {
clock_adjust_periph_pll_div(priv->mmc_id, CLOCK_ID_PERIPH,
clock, &div);
}
#endif
debug("div = %d\n", div);
writew(0, &priv->reg->clkcon);
/*
* CLKCON
* SELFREQ[15:8] : base clock divided by value
* ENSDCLK[2] : SD Clock Enable
* STBLINTCLK[1] : Internal Clock Stable
* ENINTCLK[0] : Internal Clock Enable
*/
div >>= 1;
clk = ((div << TEGRA_MMC_CLKCON_SDCLK_FREQ_SEL_SHIFT) |
TEGRA_MMC_CLKCON_INTERNAL_CLOCK_ENABLE);
writew(clk, &priv->reg->clkcon);
/* Wait max 10 ms */
timeout = 10;
while (!(readw(&priv->reg->clkcon) &
TEGRA_MMC_CLKCON_INTERNAL_CLOCK_STABLE)) {
if (timeout == 0) {
printf("%s: timeout error\n", __func__);
return;
}
timeout--;
udelay(1000);
}
clk |= TEGRA_MMC_CLKCON_SD_CLOCK_ENABLE;
writew(clk, &priv->reg->clkcon);
debug("mmc_change_clock: clkcon = %08X\n", clk);
out:
priv->clock = clock;
}
static int tegra_mmc_set_ios(struct udevice *dev)
{
struct tegra_mmc_priv *priv = dev_get_priv(dev);
struct mmc *mmc = mmc_get_mmc_dev(dev);
unsigned char ctrl;
debug(" mmc_set_ios called\n");
debug("bus_width: %x, clock: %d\n", mmc->bus_width, mmc->clock);
/* Change clock first */
tegra_mmc_change_clock(priv, mmc->clock);
ctrl = readb(&priv->reg->hostctl);
/*
* WIDE8[5]
* 0 = Depend on WIDE4
* 1 = 8-bit mode
* WIDE4[1]
* 1 = 4-bit mode
* 0 = 1-bit mode
*/
if (mmc->bus_width == 8)
ctrl |= (1 << 5);
else if (mmc->bus_width == 4)
ctrl |= (1 << 1);
else
ctrl &= ~(1 << 1 | 1 << 5);
writeb(ctrl, &priv->reg->hostctl);
debug("mmc_set_ios: hostctl = %08X\n", ctrl);
return 0;
}
static void tegra_mmc_pad_init(struct tegra_mmc_priv *priv)
{
#if defined(CONFIG_TEGRA30) || defined(CONFIG_TEGRA210)
u32 val;
u16 clk_con;
int timeout;
int id = priv->mmc_id;
debug("%s: sdmmc address = %p, id = %d\n", __func__,
priv->reg, id);
/* Set the pad drive strength for SDMMC1 or 3 only */
if (id != PERIPH_ID_SDMMC1 && id != PERIPH_ID_SDMMC3) {
debug("%s: settings are only valid for SDMMC1/SDMMC3!\n",
__func__);
return;
}
val = readl(&priv->reg->sdmemcmppadctl);
val &= 0xFFFFFFF0;
val |= MEMCOMP_PADCTRL_VREF;
writel(val, &priv->reg->sdmemcmppadctl);
/* Disable SD Clock Enable before running auto-cal as per TRM */
clk_con = readw(&priv->reg->clkcon);
debug("%s: CLOCK_CONTROL = 0x%04X\n", __func__, clk_con);
clk_con &= ~TEGRA_MMC_CLKCON_SD_CLOCK_ENABLE;
writew(clk_con, &priv->reg->clkcon);
val = readl(&priv->reg->autocalcfg);
val &= 0xFFFF0000;
val |= AUTO_CAL_PU_OFFSET | AUTO_CAL_PD_OFFSET;
writel(val, &priv->reg->autocalcfg);
val |= AUTO_CAL_START | AUTO_CAL_ENABLE;
writel(val, &priv->reg->autocalcfg);
debug("%s: AUTO_CAL_CFG = 0x%08X\n", __func__, val);
udelay(1);
timeout = 100; /* 10 mSec max (100*100uS) */
do {
val = readl(&priv->reg->autocalsts);
udelay(100);
} while ((val & AUTO_CAL_ACTIVE) && --timeout);
val = readl(&priv->reg->autocalsts);
debug("%s: Final AUTO_CAL_STATUS = 0x%08X, timeout = %d\n",
__func__, val, timeout);
/* Re-enable SD Clock Enable when auto-cal is done */
clk_con |= TEGRA_MMC_CLKCON_SD_CLOCK_ENABLE;
writew(clk_con, &priv->reg->clkcon);
clk_con = readw(&priv->reg->clkcon);
debug("%s: final CLOCK_CONTROL = 0x%04X\n", __func__, clk_con);
if (timeout == 0) {
printf("%s: Warning: Autocal timed out!\n", __func__);
/* TBD: Set CFG2TMC_SDMMC1_PAD_CAL_DRV* regs here */
}
#if defined(CONFIG_TEGRA210)
u32 tap_value, trim_value;
/* Set tap/trim values for SDMMC1/3 @ <48MHz here */
val = readl(&priv->reg->venspictl); /* aka VENDOR_SYS_SW_CNTL */
val &= IO_TRIM_BYPASS_MASK;
if (id == PERIPH_ID_SDMMC1) {
tap_value = 4; /* default */
if (val)
tap_value = 3;
trim_value = 2;
} else { /* SDMMC3 */
tap_value = 3;
trim_value = 3;
}
val = readl(&priv->reg->venclkctl);
val &= ~TRIM_VAL_MASK;
val |= (trim_value << TRIM_VAL_SHIFT);
val &= ~TAP_VAL_MASK;
val |= (tap_value << TAP_VAL_SHIFT);
writel(val, &priv->reg->venclkctl);
debug("%s: VENDOR_CLOCK_CNTRL = 0x%08X\n", __func__, val);
#endif /* T210 */
#endif /* T30/T210 */
}
static void tegra_mmc_reset(struct tegra_mmc_priv *priv, struct mmc *mmc)
{
unsigned int timeout;
debug(" mmc_reset called\n");
/*
* RSTALL[0] : Software reset for all
* 1 = reset
* 0 = work
*/
writeb(TEGRA_MMC_SWRST_SW_RESET_FOR_ALL, &priv->reg->swrst);
priv->clock = 0;
/* Wait max 100 ms */
timeout = 100;
/* hw clears the bit when it's done */
while (readb(&priv->reg->swrst) & TEGRA_MMC_SWRST_SW_RESET_FOR_ALL) {
if (timeout == 0) {
printf("%s: timeout error\n", __func__);
return;
}
timeout--;
udelay(1000);
}
/* Set SD bus voltage & enable bus power */
tegra_mmc_set_power(priv, fls(mmc->cfg->voltages) - 1);
debug("%s: power control = %02X, host control = %02X\n", __func__,
readb(&priv->reg->pwrcon), readb(&priv->reg->hostctl));
/* Make sure SDIO pads are set up */
tegra_mmc_pad_init(priv);
}
static int tegra_mmc_init(struct udevice *dev)
{
struct tegra_mmc_priv *priv = dev_get_priv(dev);
struct mmc *mmc = mmc_get_mmc_dev(dev);
unsigned int mask;
debug(" tegra_mmc_init called\n");
#if defined(CONFIG_TEGRA210)
priv->mmc_id = clock_decode_periph_id(dev);
if (priv->mmc_id == PERIPH_ID_NONE) {
printf("%s: Missing/invalid peripheral ID\n", __func__);
return -EINVAL;
}
#endif
tegra_mmc_reset(priv, mmc);
#if defined(CONFIG_TEGRA124_MMC_DISABLE_EXT_LOOPBACK)
/*
* Disable the external clock loopback and use the internal one on
* SDMMC3 as per the SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1
* bits being set to 0xfffd according to the TRM.
*
* TODO(marcel.ziswiler@toradex.com): Move to device tree controlled
* approach once proper kernel integration made it mainline.
*/
if (priv->reg == (void *)0x700b0400) {
mask = readl(&priv->reg->venmiscctl);
mask &= ~TEGRA_MMC_MISCON_ENABLE_EXT_LOOPBACK;
writel(mask, &priv->reg->venmiscctl);
}
#endif
priv->version = readw(&priv->reg->hcver);
debug("host version = %x\n", priv->version);
/* mask all */
writel(0xffffffff, &priv->reg->norintstsen);
writel(0xffffffff, &priv->reg->norintsigen);
writeb(0xe, &priv->reg->timeoutcon); /* TMCLK * 2^27 */
/*
* NORMAL Interrupt Status Enable Register init
* [5] ENSTABUFRDRDY : Buffer Read Ready Status Enable
* [4] ENSTABUFWTRDY : Buffer write Ready Status Enable
* [3] ENSTADMAINT : DMA boundary interrupt
* [1] ENSTASTANSCMPLT : Transfre Complete Status Enable
* [0] ENSTACMDCMPLT : Command Complete Status Enable
*/
mask = readl(&priv->reg->norintstsen);
mask &= ~(0xffff);
mask |= (TEGRA_MMC_NORINTSTSEN_CMD_COMPLETE |
TEGRA_MMC_NORINTSTSEN_XFER_COMPLETE |
TEGRA_MMC_NORINTSTSEN_DMA_INTERRUPT |
TEGRA_MMC_NORINTSTSEN_BUFFER_WRITE_READY |
TEGRA_MMC_NORINTSTSEN_BUFFER_READ_READY);
writel(mask, &priv->reg->norintstsen);
/*
* NORMAL Interrupt Signal Enable Register init
* [1] ENSTACMDCMPLT : Transfer Complete Signal Enable
*/
mask = readl(&priv->reg->norintsigen);
mask &= ~(0xffff);
mask |= TEGRA_MMC_NORINTSIGEN_XFER_COMPLETE;
writel(mask, &priv->reg->norintsigen);
return 0;
}
static int tegra_mmc_getcd(struct udevice *dev)
{
struct tegra_mmc_priv *priv = dev_get_priv(dev);
debug("tegra_mmc_getcd called\n");
if (dm_gpio_is_valid(&priv->cd_gpio))
return dm_gpio_get_value(&priv->cd_gpio);
return 1;
}
static const struct dm_mmc_ops tegra_mmc_ops = {
.send_cmd = tegra_mmc_send_cmd,
.set_ios = tegra_mmc_set_ios,
.get_cd = tegra_mmc_getcd,
};
static int tegra_mmc_probe(struct udevice *dev)
{
struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
struct tegra_mmc_plat *plat = dev_get_plat(dev);
struct tegra_mmc_priv *priv = dev_get_priv(dev);
struct mmc_config *cfg = &plat->cfg;
int bus_width, ret;
cfg->name = dev->name;
bus_width = dev_read_u32_default(dev, "bus-width", 1);
cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
cfg->host_caps = 0;
if (bus_width == 8)
cfg->host_caps |= MMC_MODE_8BIT;
if (bus_width >= 4)
cfg->host_caps |= MMC_MODE_4BIT;
cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
/*
* min freq is for card identification, and is the highest
* low-speed SDIO card frequency (actually 400KHz)
* max freq is highest HS eMMC clock as per the SD/MMC spec
* (actually 52MHz)
*/
cfg->f_min = 375000;
cfg->f_max = 48000000;
cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
priv->reg = dev_read_addr_ptr(dev);
ret = reset_get_by_name(dev, "sdhci", &priv->reset_ctl);
if (ret) {
debug("reset_get_by_name() failed: %d\n", ret);
return ret;
}
ret = clk_get_by_index(dev, 0, &priv->clk);
if (ret) {
debug("clk_get_by_index() failed: %d\n", ret);
return ret;
}
ret = reset_assert(&priv->reset_ctl);
if (ret)
return ret;
ret = clk_enable(&priv->clk);
if (ret)
return ret;
ret = clk_set_rate(&priv->clk, 20000000);
if (IS_ERR_VALUE(ret))
return ret;
ret = reset_deassert(&priv->reset_ctl);
if (ret)
return ret;
/* These GPIOs are optional */
gpio_request_by_name(dev, "cd-gpios", 0, &priv->cd_gpio, GPIOD_IS_IN);
gpio_request_by_name(dev, "wp-gpios", 0, &priv->wp_gpio, GPIOD_IS_IN);
gpio_request_by_name(dev, "power-gpios", 0, &priv->pwr_gpio,
GPIOD_IS_OUT);
if (dm_gpio_is_valid(&priv->pwr_gpio))
dm_gpio_set_value(&priv->pwr_gpio, 1);
upriv->mmc = &plat->mmc;
return tegra_mmc_init(dev);
}
static int tegra_mmc_bind(struct udevice *dev)
{
struct tegra_mmc_plat *plat = dev_get_plat(dev);
return mmc_bind(dev, &plat->mmc, &plat->cfg);
}
static const struct udevice_id tegra_mmc_ids[] = {
{ .compatible = "nvidia,tegra20-sdhci" },
{ .compatible = "nvidia,tegra30-sdhci" },
{ .compatible = "nvidia,tegra114-sdhci" },
{ .compatible = "nvidia,tegra124-sdhci" },
{ .compatible = "nvidia,tegra210-sdhci" },
{ .compatible = "nvidia,tegra186-sdhci" },
{ }
};
U_BOOT_DRIVER(tegra_mmc_drv) = {
.name = "tegra_mmc",
.id = UCLASS_MMC,
.of_match = tegra_mmc_ids,
.bind = tegra_mmc_bind,
.probe = tegra_mmc_probe,
.ops = &tegra_mmc_ops,
.plat_auto = sizeof(struct tegra_mmc_plat),
.priv_auto = sizeof(struct tegra_mmc_priv),
};