blob: 1f309bbc61fc6b00a3fb56e0d820bb9b37e311ce [file] [log] [blame]
/*
* (C) Copyright 2008 Wolfgang Grandegger <wg@denx.de>
*
* (C) Copyright 2006
* Thomas Waehner, TQ-Systems GmbH, thomas.waehner@tqs.de.
*
* (C) Copyright 2005
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* Copyright 2004 Freescale Semiconductor.
* (C) Copyright 2002,2003, Motorola Inc.
* Xianghua Xiao, (X.Xiao@motorola.com)
*
* (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <pci.h>
#include <asm/processor.h>
#include <asm/immap_85xx.h>
#include <asm/immap_fsl_pci.h>
#include <asm/io.h>
#include <ioports.h>
#include <flash.h>
#include <libfdt.h>
#include <fdt_support.h>
#include <netdev.h>
DECLARE_GLOBAL_DATA_PTR;
extern flash_info_t flash_info[]; /* FLASH chips info */
void local_bus_init (void);
ulong flash_get_size (ulong base, int banknum);
#ifdef CONFIG_PS2MULT
void ps2mult_early_init (void);
#endif
#ifdef CONFIG_CPM2
/*
* I/O Port configuration table
*
* if conf is 1, then that port pin will be configured at boot time
* according to the five values podr/pdir/ppar/psor/pdat for that entry
*/
const iop_conf_t iop_conf_tab[4][32] = {
/* Port A: conf, ppar, psor, pdir, podr, pdat */
{
{1, 1, 1, 0, 0, 0}, /* PA31: FCC1 MII COL */
{1, 1, 1, 0, 0, 0}, /* PA30: FCC1 MII CRS */
{1, 1, 1, 1, 0, 0}, /* PA29: FCC1 MII TX_ER */
{1, 1, 1, 1, 0, 0}, /* PA28: FCC1 MII TX_EN */
{1, 1, 1, 0, 0, 0}, /* PA27: FCC1 MII RX_DV */
{1, 1, 1, 0, 0, 0}, /* PA26: FCC1 MII RX_ER */
{0, 1, 0, 1, 0, 0}, /* PA25: FCC1 ATMTXD[0] */
{0, 1, 0, 1, 0, 0}, /* PA24: FCC1 ATMTXD[1] */
{0, 1, 0, 1, 0, 0}, /* PA23: FCC1 ATMTXD[2] */
{0, 1, 0, 1, 0, 0}, /* PA22: FCC1 ATMTXD[3] */
{1, 1, 0, 1, 0, 0}, /* PA21: FCC1 MII TxD[3] */
{1, 1, 0, 1, 0, 0}, /* PA20: FCC1 MII TxD[2] */
{1, 1, 0, 1, 0, 0}, /* PA19: FCC1 MII TxD[1] */
{1, 1, 0, 1, 0, 0}, /* PA18: FCC1 MII TxD[0] */
{1, 1, 0, 0, 0, 0}, /* PA17: FCC1 MII RxD[0] */
{1, 1, 0, 0, 0, 0}, /* PA16: FCC1 MII RxD[1] */
{1, 1, 0, 0, 0, 0}, /* PA15: FCC1 MII RxD[2] */
{1, 1, 0, 0, 0, 0}, /* PA14: FCC1 MII RxD[3] */
{0, 1, 0, 0, 0, 0}, /* PA13: FCC1 ATMRXD[3] */
{0, 1, 0, 0, 0, 0}, /* PA12: FCC1 ATMRXD[2] */
{0, 1, 0, 0, 0, 0}, /* PA11: FCC1 ATMRXD[1] */
{0, 1, 0, 0, 0, 0}, /* PA10: FCC1 ATMRXD[0] */
{0, 1, 1, 1, 0, 0}, /* PA9 : FCC1 L1TXD */
{0, 1, 1, 0, 0, 0}, /* PA8 : FCC1 L1RXD */
{0, 0, 0, 1, 0, 0}, /* PA7 : PA7 */
{0, 1, 1, 1, 0, 0}, /* PA6 : TDM A1 L1RSYNC */
{0, 0, 0, 1, 0, 0}, /* PA5 : PA5 */
{0, 0, 0, 1, 0, 0}, /* PA4 : PA4 */
{0, 0, 0, 1, 0, 0}, /* PA3 : PA3 */
{0, 0, 0, 1, 0, 0}, /* PA2 : PA2 */
{0, 0, 0, 0, 0, 0}, /* PA1 : FREERUN */
{0, 0, 0, 1, 0, 0} /* PA0 : PA0 */
},
/* Port B: conf, ppar, psor, pdir, podr, pdat */
{
{1, 1, 0, 1, 0, 0}, /* PB31: FCC2 MII TX_ER */
{1, 1, 0, 0, 0, 0}, /* PB30: FCC2 MII RX_DV */
{1, 1, 1, 1, 0, 0}, /* PB29: FCC2 MII TX_EN */
{1, 1, 0, 0, 0, 0}, /* PB28: FCC2 MII RX_ER */
{1, 1, 0, 0, 0, 0}, /* PB27: FCC2 MII COL */
{1, 1, 0, 0, 0, 0}, /* PB26: FCC2 MII CRS */
{1, 1, 0, 1, 0, 0}, /* PB25: FCC2 MII TxD[3] */
{1, 1, 0, 1, 0, 0}, /* PB24: FCC2 MII TxD[2] */
{1, 1, 0, 1, 0, 0}, /* PB23: FCC2 MII TxD[1] */
{1, 1, 0, 1, 0, 0}, /* PB22: FCC2 MII TxD[0] */
{1, 1, 0, 0, 0, 0}, /* PB21: FCC2 MII RxD[0] */
{1, 1, 0, 0, 0, 0}, /* PB20: FCC2 MII RxD[1] */
{1, 1, 0, 0, 0, 0}, /* PB19: FCC2 MII RxD[2] */
{1, 1, 0, 0, 0, 0}, /* PB18: FCC2 MII RxD[3] */
{1, 1, 0, 0, 0, 0}, /* PB17: FCC3:RX_DIV */
{1, 1, 0, 0, 0, 0}, /* PB16: FCC3:RX_ERR */
{1, 1, 0, 1, 0, 0}, /* PB15: FCC3:TX_ERR */
{1, 1, 0, 1, 0, 0}, /* PB14: FCC3:TX_EN */
{1, 1, 0, 0, 0, 0}, /* PB13: FCC3:COL */
{1, 1, 0, 0, 0, 0}, /* PB12: FCC3:CRS */
{1, 1, 0, 0, 0, 0}, /* PB11: FCC3:RXD */
{1, 1, 0, 0, 0, 0}, /* PB10: FCC3:RXD */
{1, 1, 0, 0, 0, 0}, /* PB9 : FCC3:RXD */
{1, 1, 0, 0, 0, 0}, /* PB8 : FCC3:RXD */
{1, 1, 0, 1, 0, 0}, /* PB7 : FCC3:TXD */
{1, 1, 0, 1, 0, 0}, /* PB6 : FCC3:TXD */
{1, 1, 0, 1, 0, 0}, /* PB5 : FCC3:TXD */
{1, 1, 0, 1, 0, 0}, /* PB4 : FCC3:TXD */
{0, 0, 0, 0, 0, 0}, /* PB3 : pin doesn't exist */
{0, 0, 0, 0, 0, 0}, /* PB2 : pin doesn't exist */
{0, 0, 0, 0, 0, 0}, /* PB1 : pin doesn't exist */
{0, 0, 0, 0, 0, 0} /* PB0 : pin doesn't exist */
},
/* Port C: conf, ppar, psor, pdir, podr, pdat */
{
{0, 0, 0, 1, 0, 0}, /* PC31: PC31 */
{0, 0, 0, 1, 0, 0}, /* PC30: PC30 */
{0, 1, 1, 0, 0, 0}, /* PC29: SCC1 EN *CLSN */
{0, 0, 0, 1, 0, 0}, /* PC28: PC28 */
{0, 0, 0, 1, 0, 0}, /* PC27: UART Clock in */
{0, 0, 0, 1, 0, 0}, /* PC26: PC26 */
{0, 0, 0, 1, 0, 0}, /* PC25: PC25 */
{0, 0, 0, 1, 0, 0}, /* PC24: PC24 */
{0, 1, 0, 1, 0, 0}, /* PC23: ATMTFCLK */
{0, 1, 0, 0, 0, 0}, /* PC22: ATMRFCLK */
{1, 1, 0, 0, 0, 0}, /* PC21: SCC1 EN RXCLK */
{1, 1, 0, 0, 0, 0}, /* PC20: SCC1 EN TXCLK */
{1, 1, 0, 0, 0, 0}, /* PC19: FCC2 MII RX_CLK CLK13 */
{1, 1, 0, 0, 0, 0}, /* PC18: FCC Tx Clock (CLK14) */
{1, 1, 0, 0, 0, 0}, /* PC17: PC17 */
{1, 1, 0, 0, 0, 0}, /* PC16: FCC Tx Clock (CLK16) */
{0, 1, 0, 0, 0, 0}, /* PC15: PC15 */
{0, 1, 0, 0, 0, 0}, /* PC14: SCC1 EN *CD */
{0, 1, 0, 0, 0, 0}, /* PC13: PC13 */
{0, 1, 0, 1, 0, 0}, /* PC12: PC12 */
{0, 0, 0, 1, 0, 0}, /* PC11: LXT971 transmit control */
{0, 0, 0, 1, 0, 0}, /* PC10: FETHMDC */
{0, 0, 0, 0, 0, 0}, /* PC9 : FETHMDIO */
{0, 0, 0, 1, 0, 0}, /* PC8 : PC8 */
{0, 0, 0, 1, 0, 0}, /* PC7 : PC7 */
{0, 0, 0, 1, 0, 0}, /* PC6 : PC6 */
{0, 0, 0, 1, 0, 0}, /* PC5 : PC5 */
{0, 0, 0, 1, 0, 0}, /* PC4 : PC4 */
{0, 0, 0, 1, 0, 0}, /* PC3 : PC3 */
{0, 0, 0, 1, 0, 1}, /* PC2 : ENET FDE */
{0, 0, 0, 1, 0, 0}, /* PC1 : ENET DSQE */
{0, 0, 0, 1, 0, 0}, /* PC0 : ENET LBK */
},
/* Port D: conf, ppar, psor, pdir, podr, pdat */
{
#ifdef CONFIG_TQM8560
{1, 1, 0, 0, 0, 0}, /* PD31: SCC1 EN RxD */
{1, 1, 1, 1, 0, 0}, /* PD30: SCC1 EN TxD */
{1, 1, 0, 1, 0, 0}, /* PD29: SCC1 EN TENA */
#else /* !CONFIG_TQM8560 */
{0, 0, 0, 0, 0, 0}, /* PD31: PD31 */
{0, 0, 0, 0, 0, 0}, /* PD30: PD30 */
{0, 0, 0, 0, 0, 0}, /* PD29: PD29 */
#endif /* CONFIG_TQM8560 */
{1, 1, 0, 0, 0, 0}, /* PD28: PD28 */
{1, 1, 0, 1, 0, 0}, /* PD27: PD27 */
{1, 1, 0, 1, 0, 0}, /* PD26: PD26 */
{0, 0, 0, 1, 0, 0}, /* PD25: PD25 */
{0, 0, 0, 1, 0, 0}, /* PD24: PD24 */
{0, 0, 0, 1, 0, 0}, /* PD23: PD23 */
{0, 0, 0, 1, 0, 0}, /* PD22: PD22 */
{0, 0, 0, 1, 0, 0}, /* PD21: PD21 */
{0, 0, 0, 1, 0, 0}, /* PD20: PD20 */
{0, 0, 0, 1, 0, 0}, /* PD19: PD19 */
{0, 0, 0, 1, 0, 0}, /* PD18: PD18 */
{0, 1, 0, 0, 0, 0}, /* PD17: FCC1 ATMRXPRTY */
{0, 1, 0, 1, 0, 0}, /* PD16: FCC1 ATMTXPRTY */
{0, 1, 1, 0, 1, 0}, /* PD15: I2C SDA */
{0, 0, 0, 1, 0, 0}, /* PD14: LED */
{0, 0, 0, 0, 0, 0}, /* PD13: PD13 */
{0, 0, 0, 0, 0, 0}, /* PD12: PD12 */
{0, 0, 0, 0, 0, 0}, /* PD11: PD11 */
{0, 0, 0, 0, 0, 0}, /* PD10: PD10 */
{0, 1, 0, 1, 0, 0}, /* PD9 : SMC1 TXD */
{0, 1, 0, 0, 0, 0}, /* PD8 : SMC1 RXD */
{0, 0, 0, 1, 0, 1}, /* PD7 : PD7 */
{0, 0, 0, 1, 0, 1}, /* PD6 : PD6 */
{0, 0, 0, 1, 0, 1}, /* PD5 : PD5 */
{0, 0, 0, 1, 0, 1}, /* PD4 : PD4 */
{0, 0, 0, 0, 0, 0}, /* PD3 : pin doesn't exist */
{0, 0, 0, 0, 0, 0}, /* PD2 : pin doesn't exist */
{0, 0, 0, 0, 0, 0}, /* PD1 : pin doesn't exist */
{0, 0, 0, 0, 0, 0} /* PD0 : pin doesn't exist */
}
};
#endif /* CONFIG_CPM2 */
#define CASL_STRING1 "casl=xx"
#define CASL_STRING2 "casl="
static const int casl_table[] = { 20, 25, 30 };
#define N_CASL (sizeof(casl_table) / sizeof(casl_table[0]))
int cas_latency (void)
{
char *s = getenv ("serial#");
int casl;
int val;
int i;
casl = CONFIG_DDR_DEFAULT_CL;
if (s != NULL) {
if (strncmp(s + strlen (s) - strlen (CASL_STRING1),
CASL_STRING2, strlen (CASL_STRING2)) == 0) {
val = simple_strtoul (s + strlen (s) - 2, NULL, 10);
for (i = 0; i < N_CASL; ++i) {
if (val == casl_table[i]) {
return val;
}
}
}
}
return casl;
}
int checkboard (void)
{
char *s = getenv ("serial#");
printf ("Board: %s", CONFIG_BOARDNAME);
if (s != NULL) {
puts (", serial# ");
puts (s);
}
putc ('\n');
/*
* Initialize local bus.
*/
local_bus_init ();
return 0;
}
int misc_init_r (void)
{
volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
/*
* Adjust flash start and offset to detected values
*/
gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
gd->bd->bi_flashoffset = 0;
/*
* Recalculate CS configuration if second FLASH bank is available
*/
if (flash_info[0].size > 0) {
memctl->or1 = ((-flash_info[0].size) & 0xffff8000) |
(CONFIG_SYS_OR1_PRELIM & 0x00007fff);
memctl->br1 = gd->bd->bi_flashstart |
(CONFIG_SYS_BR1_PRELIM & 0x00007fff);
/*
* Re-check to get correct base address for bank 1
*/
flash_get_size (gd->bd->bi_flashstart, 0);
} else {
memctl->or1 = 0;
memctl->br1 = 0;
}
/*
* If bank 1 is equipped, bank 0 is mapped after bank 1
*/
memctl->or0 = ((-flash_info[1].size) & 0xffff8000) |
(CONFIG_SYS_OR0_PRELIM & 0x00007fff);
memctl->br0 = (gd->bd->bi_flashstart + flash_info[0].size) |
(CONFIG_SYS_BR0_PRELIM & 0x00007fff);
/*
* Re-check to get correct base address for bank 0
*/
flash_get_size (gd->bd->bi_flashstart + flash_info[0].size, 1);
/*
* Re-do flash protection upon new addresses
*/
flash_protect (FLAG_PROTECT_CLEAR,
gd->bd->bi_flashstart, 0xffffffff,
&flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
/* Monitor protection ON by default */
flash_protect (FLAG_PROTECT_SET,
CONFIG_SYS_MONITOR_BASE,
CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
&flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
/* Environment protection ON by default */
flash_protect (FLAG_PROTECT_SET,
CONFIG_ENV_ADDR,
CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
&flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
#ifdef CONFIG_ENV_ADDR_REDUND
/* Redundant environment protection ON by default */
flash_protect (FLAG_PROTECT_SET,
CONFIG_ENV_ADDR_REDUND,
CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SIZE_REDUND - 1,
&flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
#endif
return 0;
}
#ifdef CONFIG_CAN_DRIVER
/*
* Initialize UPMC RAM
*/
static void upmc_write (u_char addr, uint val)
{
volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
out_be32 (&lbc->mdr, val);
clrsetbits_be32(&lbc->mcmr, MxMR_MAD_MSK,
MxMR_OP_WARR | (addr & MxMR_MAD_MSK));
/* dummy access to perform write */
out_8 ((void __iomem *)CONFIG_SYS_CAN_BASE, 0);
/* normal operation */
clrbits_be32(&lbc->mcmr, MxMR_OP_WARR);
}
#endif /* CONFIG_CAN_DRIVER */
uint get_lbc_clock (void)
{
volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
sys_info_t sys_info;
ulong clkdiv = lbc->lcrr & 0x0f;
get_sys_info (&sys_info);
if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) {
#ifdef CONFIG_MPC8548
/*
* Yes, the entire PQ38 family use the same
* bit-representation for twice the clock divider value.
*/
clkdiv *= 2;
#endif
return sys_info.freqSystemBus / clkdiv;
}
puts("Invalid clock divider value in CONFIG_SYS_LBC_LCRR\n");
return 0;
}
/*
* Initialize Local Bus
*/
void local_bus_init (void)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
uint lbc_mhz = get_lbc_clock () / 1000000;
#ifdef CONFIG_MPC8548
uint svr = get_svr ();
uint lcrr;
/*
* MPC revision < 2.0
* According to MPC8548E_Device_Errata Rev. L, Erratum LBIU1:
* Modify engineering use only register at address 0xE_0F20.
* "1. Read register at offset 0xE_0F20
* 2. And value with 0x0000_FFFF
* 3. OR result with 0x0000_0004
* 4. Write result back to offset 0xE_0F20."
*
* According to MPC8548E_Device_Errata Rev. L, Erratum LBIU2:
* Modify engineering use only register at address 0xE_0F20.
* "1. Read register at offset 0xE_0F20
* 2. And value with 0xFFFF_FFDF
* 3. Write result back to offset 0xE_0F20."
*
* Since it is the same register, we do the modification in one step.
*/
if (SVR_MAJ (svr) < 2) {
uint dummy = gur->lbiuiplldcr1;
dummy &= 0x0000FFDF;
dummy |= 0x00000004;
gur->lbiuiplldcr1 = dummy;
}
lcrr = CONFIG_SYS_LBC_LCRR;
/*
* Local Bus Clock > 83.3 MHz. According to timing
* specifications set LCRR[EADC] to 2 delay cycles.
*/
if (lbc_mhz > 83) {
lcrr &= ~LCRR_EADC;
lcrr |= LCRR_EADC_2;
}
/*
* According to MPC8548ERMAD Rev. 1.3, 13.3.1.16, 13-30
* disable PLL bypass for Local Bus Clock > 83 MHz.
*/
if (lbc_mhz >= 66)
lcrr &= (~LCRR_DBYP); /* DLL Enabled */
else
lcrr |= LCRR_DBYP; /* DLL Bypass */
lbc->lcrr = lcrr;
asm ("sync;isync;msync");
/*
* According to MPC8548ERMAD Rev.1.3 read back LCRR
* and terminate with isync
*/
lcrr = lbc->lcrr;
asm ("isync;");
/* let DLL stabilize */
udelay (500);
#else /* !CONFIG_MPC8548 */
/*
* Errata LBC11.
* Fix Local Bus clock glitch when DLL is enabled.
*
* If localbus freq is < 66MHz, DLL bypass mode must be used.
* If localbus freq is > 133MHz, DLL can be safely enabled.
* Between 66 and 133, the DLL is enabled with an override workaround.
*/
if (lbc_mhz < 66) {
lbc->lcrr = CONFIG_SYS_LBC_LCRR | LCRR_DBYP; /* DLL Bypass */
lbc->ltedr = LTEDR_BMD | LTEDR_PARD | LTEDR_WPD | LTEDR_WARA |
LTEDR_RAWA | LTEDR_CSD; /* Disable all error checking */
} else if (lbc_mhz >= 133) {
lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~LCRR_DBYP); /* DLL Enabled */
} else {
/*
* On REV1 boards, need to change CLKDIV before enable DLL.
* Default CLKDIV is 8, change it to 4 temporarily.
*/
uint pvr = get_pvr ();
uint temp_lbcdll = 0;
if (pvr == PVR_85xx_REV1) {
/* FIXME: Justify the high bit here. */
lbc->lcrr = 0x10000004;
}
lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~LCRR_DBYP); /* DLL Enabled */
udelay (200);
/*
* Sample LBC DLL ctrl reg, upshift it to set the
* override bits.
*/
temp_lbcdll = gur->lbcdllcr;
gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000);
asm ("sync;isync;msync");
}
#endif /* !CONFIG_MPC8548 */
#ifdef CONFIG_CAN_DRIVER
/*
* According to timing specifications EAD must be
* set if Local Bus Clock is > 83 MHz.
*/
if (lbc_mhz > 83)
out_be32 (&lbc->or2, CONFIG_SYS_OR2_CAN | OR_UPM_EAD);
else
out_be32 (&lbc->or2, CONFIG_SYS_OR2_CAN);
out_be32 (&lbc->br2, CONFIG_SYS_BR2_CAN);
/* LGPL4 is UPWAIT */
out_be32(&lbc->mcmr, MxMR_DSx_3_CYCL | MxMR_GPL_x4DIS | MxMR_WLFx_3X);
/* Initialize UPMC for CAN: single read */
upmc_write (0x00, 0xFFFFED00);
upmc_write (0x01, 0xCCFFCC00);
upmc_write (0x02, 0x00FFCF00);
upmc_write (0x03, 0x00FFCF00);
upmc_write (0x04, 0x00FFDC00);
upmc_write (0x05, 0x00FFCF00);
upmc_write (0x06, 0x00FFED00);
upmc_write (0x07, 0x3FFFCC07);
/* Initialize UPMC for CAN: single write */
upmc_write (0x18, 0xFFFFED00);
upmc_write (0x19, 0xCCFFEC00);
upmc_write (0x1A, 0x00FFED80);
upmc_write (0x1B, 0x00FFED80);
upmc_write (0x1C, 0x00FFFC00);
upmc_write (0x1D, 0x0FFFEC00);
upmc_write (0x1E, 0x0FFFEF00);
upmc_write (0x1F, 0x3FFFEC05);
#endif /* CONFIG_CAN_DRIVER */
}
/*
* Initialize PCI Devices, report devices found.
*/
static int first_free_busno;
#if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
static struct pci_controller pci1_hose;
#endif /* CONFIG_PCI || CONFIG_PCI1 */
#ifdef CONFIG_PCIE1
static struct pci_controller pcie1_hose;
#endif /* CONFIG_PCIE1 */
static inline void init_pci1(void)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
#if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)CONFIG_SYS_PCI1_ADDR;
extern void fsl_pci_init(struct pci_controller *hose);
struct pci_controller *hose = &pci1_hose;
/* PORDEVSR[15] */
uint pci_32 = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32;
/* PORDEVSR[14] */
uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
/* PORPLLSR[16] */
uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
uint pci_agent = (host_agent == 3) || (host_agent == 4 ) ||
(host_agent == 6);
uint pci_speed = CONFIG_SYS_CLK_FREQ; /* PCI PSPEED in [4:5] */
if (!(gur->devdisr & MPC85xx_DEVDISR_PCI1)) {
printf ("PCI1: %d bit, %s MHz, %s, %s, %s\n",
(pci_32) ? 32 : 64,
(pci_speed == 33333333) ? "33" :
(pci_speed == 66666666) ? "66" : "unknown",
pci_clk_sel ? "sync" : "async",
pci_agent ? "agent" : "host",
pci_arb ? "arbiter" : "external-arbiter");
/* inbound */
pci_set_region (hose->regions + 0,
CONFIG_SYS_PCI_MEMORY_BUS,
CONFIG_SYS_PCI_MEMORY_PHYS,
CONFIG_SYS_PCI_MEMORY_SIZE,
PCI_REGION_MEM | PCI_REGION_MEMORY);
/* outbound memory */
pci_set_region (hose->regions + 1,
CONFIG_SYS_PCI1_MEM_BASE,
CONFIG_SYS_PCI1_MEM_PHYS,
CONFIG_SYS_PCI1_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
pci_set_region (hose->regions + 2,
CONFIG_SYS_PCI1_IO_BASE,
CONFIG_SYS_PCI1_IO_PHYS,
CONFIG_SYS_PCI1_IO_SIZE,
PCI_REGION_IO);
hose->region_count = 3;
hose->first_busno = first_free_busno;
pci_setup_indirect (hose, (int)&pci->cfg_addr,
(int)&pci->cfg_data);
fsl_pci_init (hose);
printf (" PCI on bus %02x..%02x\n",
hose->first_busno, hose->last_busno);
first_free_busno = hose->last_busno + 1;
#ifdef CONFIG_PCIX_CHECK
if (!(gur->pordevsr & PORDEVSR_PCI)) {
ushort reg16 =
PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ |
PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
uint dev = PCI_BDF(hose->first_busno, 0, 0);
/* PCI-X init */
if (CONFIG_SYS_CLK_FREQ < 66000000)
puts ("PCI-X will only work at 66 MHz\n");
pci_hose_write_config_word (hose, dev, PCIX_COMMAND,
reg16);
}
#endif
} else {
puts ("PCI1: disabled\n");
}
#else /* !(CONFIG_PCI || CONFIG_PCI1) */
gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */
#endif /* CONFIG_PCI || CONFIG_PCI1) */
}
static inline void init_pcie1(void)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
#ifdef CONFIG_PCIE1
uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)CONFIG_SYS_PCIE1_ADDR;
extern void fsl_pci_init(struct pci_controller *hose);
struct pci_controller *hose = &pcie1_hose;
int pcie_ep = (host_agent == 0) || (host_agent == 2 ) ||
(host_agent == 3);
int pcie_configured = io_sel >= 1;
if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){
printf ("PCIe: %s, base address %x",
pcie_ep ? "End point" : "Root complex", (uint)pci);
if (pci->pme_msg_det) {
pci->pme_msg_det = 0xffffffff;
debug (", with errors. Clearing. Now 0x%08x",
pci->pme_msg_det);
}
puts ("\n");
/* inbound */
pci_set_region (hose->regions + 0,
CONFIG_SYS_PCI_MEMORY_BUS,
CONFIG_SYS_PCI_MEMORY_PHYS,
CONFIG_SYS_PCI_MEMORY_SIZE,
PCI_REGION_MEM | PCI_REGION_MEMORY);
/* outbound memory */
pci_set_region (hose->regions + 1,
CONFIG_SYS_PCIE1_MEM_BASE,
CONFIG_SYS_PCIE1_MEM_PHYS,
CONFIG_SYS_PCIE1_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
pci_set_region (hose->regions + 2,
CONFIG_SYS_PCIE1_IO_BASE,
CONFIG_SYS_PCIE1_IO_PHYS,
CONFIG_SYS_PCIE1_IO_SIZE,
PCI_REGION_IO);
hose->region_count = 3;
hose->first_busno = first_free_busno;
pci_setup_indirect(hose, (int)&pci->cfg_addr,
(int)&pci->cfg_data);
fsl_pci_init (hose);
printf (" PCIe on bus %02x..%02x\n",
hose->first_busno, hose->last_busno);
first_free_busno = hose->last_busno + 1;
} else {
printf ("PCIe: disabled\n");
}
#else /* !CONFIG_PCIE1 */
gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
#endif /* CONFIG_PCIE1 */
}
void pci_init_board (void)
{
init_pci1();
init_pcie1();
}
#ifdef CONFIG_OF_BOARD_SETUP
void ft_board_setup (void *blob, bd_t *bd)
{
int node, tmp[2];
const char *path;
ft_cpu_setup (blob, bd);
node = fdt_path_offset (blob, "/aliases");
tmp[0] = 0;
if (node >= 0) {
#if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
path = fdt_getprop (blob, node, "pci0", NULL);
if (path) {
tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
do_fixup_by_path (blob, path, "bus-range", &tmp, 8, 1);
}
#endif /* CONFIG_PCI || CONFIG_PCI1 */
#ifdef CONFIG_PCIE1
path = fdt_getprop (blob, node, "pci1", NULL);
if (path) {
tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
do_fixup_by_path (blob, path, "bus-range", &tmp, 8, 1);
}
#endif /* CONFIG_PCIE1 */
}
}
#endif /* CONFIG_OF_BOARD_SETUP */
#ifdef CONFIG_BOARD_EARLY_INIT_R
int board_early_init_r (void)
{
#ifdef CONFIG_PS2MULT
ps2mult_early_init ();
#endif /* CONFIG_PS2MULT */
return (0);
}
#endif /* CONFIG_BOARD_EARLY_INIT_R */
int board_eth_init(bd_t *bis)
{
cpu_eth_init(bis); /* Intialize TSECs first */
return pci_eth_init(bis);
}