| /* |
| * cmd_otp.c - interface to Blackfin on-chip One-Time-Programmable memory |
| * |
| * Copyright (c) 2007-2008 Analog Devices Inc. |
| * |
| * Licensed under the GPL-2 or later. |
| */ |
| |
| /* There are 512 128-bit "pages" (0x000 to 0x1FF). |
| * The pages are accessable as 64-bit "halfpages" (an upper and lower half). |
| * The pages are not part of the memory map. There is an OTP controller which |
| * handles scanning in/out of bits. While access is done through OTP MMRs, |
| * the bootrom provides C-callable helper functions to handle the interaction. |
| */ |
| |
| #include <config.h> |
| #include <common.h> |
| #include <command.h> |
| |
| #ifdef CONFIG_CMD_OTP |
| |
| #include <asm/blackfin.h> |
| #include <asm/mach-common/bits/otp.h> |
| |
| static const char *otp_strerror(uint32_t err) |
| { |
| switch (err) { |
| case 0: return "no error"; |
| case OTP_WRITE_ERROR: return "OTP fuse write error"; |
| case OTP_READ_ERROR: return "OTP fuse read error"; |
| case OTP_ACC_VIO_ERROR: return "invalid OTP address"; |
| case OTP_DATA_MULT_ERROR: return "multiple bad bits detected"; |
| case OTP_ECC_MULT_ERROR: return "error in ECC bits"; |
| case OTP_PREV_WR_ERROR: return "space already written"; |
| case OTP_DATA_SB_WARN: return "single bad bit in half page"; |
| case OTP_ECC_SB_WARN: return "single bad bit in ECC"; |
| default: return "unknown error"; |
| } |
| } |
| |
| #define lowup(x) ((x) % 2 ? "upper" : "lower") |
| |
| int do_otp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| { |
| bool force = false; |
| if (!strcmp(argv[1], "--force")) { |
| force = true; |
| argv[1] = argv[0]; |
| argv++; |
| --argc; |
| } |
| |
| uint32_t (*otp_func)(uint32_t page, uint32_t flags, uint64_t *page_content); |
| if (!strcmp(argv[1], "read")) |
| otp_func = otp_read; |
| else if (!strcmp(argv[1], "write")) |
| otp_func = otp_write; |
| else { |
| usage: |
| cmd_usage(cmdtp); |
| return 1; |
| } |
| |
| uint64_t *addr = (uint64_t *)simple_strtoul(argv[2], NULL, 16); |
| uint32_t page = simple_strtoul(argv[3], NULL, 16); |
| uint32_t flags, ret; |
| size_t i, count; |
| ulong half; |
| |
| if (argc > 4) |
| count = simple_strtoul(argv[4], NULL, 16); |
| else |
| count = 2; |
| |
| if (argc > 5) { |
| half = simple_strtoul(argv[5], NULL, 16); |
| if (half != 0 && half != 1) { |
| puts("Error: 'half' can only be '0' or '1'\n"); |
| goto usage; |
| } |
| } else |
| half = 0; |
| |
| /* do to the nature of OTP, make sure users are sure */ |
| if (!force && otp_func == otp_write) { |
| printf( |
| "Writing one time programmable memory\n" |
| "Make sure your operating voltages and temperature are within spec\n" |
| " source address: 0x%p\n" |
| " OTP destination: %s page 0x%03X - %s page 0x%03X\n" |
| " number to write: %ld halfpages\n" |
| " type \"YES\" (no quotes) to confirm: ", |
| addr, |
| lowup(half), page, |
| lowup(half + count - 1), page + (half + count - 1) / 2, |
| half + count |
| ); |
| |
| i = 0; |
| while (1) { |
| if (tstc()) { |
| const char exp_ans[] = "YES\r"; |
| char c; |
| putc(c = getc()); |
| if (exp_ans[i++] != c) { |
| printf(" Aborting\n"); |
| return 1; |
| } else if (!exp_ans[i]) { |
| puts("\n"); |
| break; |
| } |
| } |
| } |
| |
| /* Only supported in newer silicon ... enable writing */ |
| #if (0) |
| otp_command(OTP_INIT, ...); |
| #else |
| *pOTP_TIMING = 0x32149485; |
| #endif |
| } |
| |
| printf("OTP memory %s: addr 0x%08lx page 0x%03X count %ld ... ", |
| argv[1], addr, page, count); |
| |
| ret = 0; |
| for (i = half; i < count + half; ++i) { |
| flags = (i % 2) ? OTP_UPPER_HALF : OTP_LOWER_HALF; |
| ret = otp_func(page, flags, addr); |
| if (ret & 0x1) |
| break; |
| else if (ret) |
| puts("W"); |
| else |
| puts("."); |
| ++addr; |
| if (i % 2) |
| ++page; |
| } |
| if (ret & 0x1) |
| printf("\nERROR at page 0x%03X (%s-halfpage): 0x%03X: %s\n", |
| page, lowup(i), ret, otp_strerror(ret)); |
| else |
| puts(" done\n"); |
| |
| if (otp_func == otp_write) |
| /* Only supported in newer silicon ... disable writing */ |
| #if (0) |
| otp_command(OTP_INIT, ...); |
| #else |
| *pOTP_TIMING = 0x1485; |
| #endif |
| |
| return ret; |
| } |
| |
| U_BOOT_CMD(otp, 6, 0, do_otp, |
| "One-Time-Programmable sub-system", |
| "read <addr> <page> [count] [half]\n" |
| "otp write [--force] <addr> <page> [count] [half]\n" |
| " - read/write 'count' half-pages starting at page 'page' (offset 'half')\n"); |
| |
| #endif |