blob: 3f64cb3749b0f58b457a78a7f3398158eea68fe2 [file] [log] [blame]
/*
* (C) Copyright 2004
* DAVE Srl
*
* http://www.dave-tech.it
* http://www.wawnet.biz
* mailto:info@wawnet.biz
*
* memsetup-sa1110.S (blob): memory setup for various SA1110 architectures
* Modified By MATTO
*
* Copyright (C) 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
/*
* Documentation:
* Intel Corporation, "Intel StrongARM SA-1110 Microprocessor
* Advanced Developer's manual, December 1999
*
* Intel has a very hard to find SDRAM configurator on their web site:
* http://appzone.intel.com/hcd/sa1110/memory/index.asp
*
* NOTE: This code assumes that an SA1110 CPU *always* uses SDRAM. This
* appears to be true, but it might be possible that somebody designs a
* board with mixed EDODRAM/SDRAM memory (which is a bad idea). -- Erik
*
* 04-10-2001: SELETZ
* - separated memory config for multiple platform support
* - perform SA1110 Hardware Reset Procedure
*
*/
.equ B0_Tacs, 0x0 /* 0clk */
.equ B0_Tcos, 0x0 /* 0clk */
.equ B0_Tacc, 0x4 /* 6clk */
.equ B0_Tcoh, 0x0 /* 0clk */
.equ B0_Tah, 0x0 /* 0clk */
.equ B0_Tacp, 0x0 /* 0clk */
.equ B0_PMC, 0x0 /* normal(1data) */
/* Bank 1 parameter */
.equ B1_Tacs, 0x3 /* 4clk */
.equ B1_Tcos, 0x3 /* 4clk */
.equ B1_Tacc, 0x7 /* 14clkv */
.equ B1_Tcoh, 0x3 /* 4clk */
.equ B1_Tah, 0x3 /* 4clk */
.equ B1_Tacp, 0x3 /* 6clk */
.equ B1_PMC, 0x0 /* normal(1data) */
/* Bank 2 parameter - LAN91C96 */
.equ B2_Tacs, 0x3 /* 4clk */
.equ B2_Tcos, 0x3 /* 4clk */
.equ B2_Tacc, 0x7 /* 14clk */
.equ B2_Tcoh, 0x3 /* 4clk */
.equ B2_Tah, 0x3 /* 4clk */
.equ B2_Tacp, 0x3 /* 6clk */
.equ B2_PMC, 0x0 /* normal(1data) */
/* Bank 3 parameter */
.equ B3_Tacs, 0x3 /* 4clk */
.equ B3_Tcos, 0x3 /* 4clk */
.equ B3_Tacc, 0x7 /* 14clk */
.equ B3_Tcoh, 0x3 /* 4clk */
.equ B3_Tah, 0x3 /* 4clk */
.equ B3_Tacp, 0x3 /* 6clk */
.equ B3_PMC, 0x0 /* normal(1data) */
/* Bank 4 parameter */
.equ B4_Tacs, 0x3 /* 4clk */
.equ B4_Tcos, 0x3 /* 4clk */
.equ B4_Tacc, 0x7 /* 14clk */
.equ B4_Tcoh, 0x3 /* 4clk */
.equ B4_Tah, 0x3 /* 4clk */
.equ B4_Tacp, 0x3 /* 6clk */
.equ B4_PMC, 0x0 /* normal(1data) */
/* Bank 5 parameter */
.equ B5_Tacs, 0x3 /* 4clk */
.equ B5_Tcos, 0x3 /* 4clk */
.equ B5_Tacc, 0x7 /* 14clk */
.equ B5_Tcoh, 0x3 /* 4clk */
.equ B5_Tah, 0x3 /* 4clk */
.equ B5_Tacp, 0x3 /* 6clk */
.equ B5_PMC, 0x0 /* normal(1data) */
/* Bank 6(if SROM) parameter */
.equ B6_Tacs, 0x3 /* 4clk */
.equ B6_Tcos, 0x3 /* 4clk */
.equ B6_Tacc, 0x7 /* 14clk */
.equ B6_Tcoh, 0x3 /* 4clk */
.equ B6_Tah, 0x3 /* 4clk */
.equ B6_Tacp, 0x3 /* 6clk */
.equ B6_PMC, 0x0 /* normal(1data) */
/* Bank 7(if SROM) parameter */
.equ B7_Tacs, 0x3 /* 4clk */
.equ B7_Tcos, 0x3 /* 4clk */
.equ B7_Tacc, 0x7 /* 14clk */
.equ B7_Tcoh, 0x3 /* 4clk */
.equ B7_Tah, 0x3 /* 4clk */
.equ B7_Tacp, 0x3 /* 6clk */
.equ B7_PMC, 0x0 /* normal(1data) */
/* Bank 6 parameter */
.equ B6_MT, 0x3 /* SDRAM */
.equ B6_Trcd, 0x0 /* 2clk */
.equ B6_SCAN, 0x0 /* 10bit */
.equ B7_MT, 0x3 /* SDRAM */
.equ B7_Trcd, 0x0 /* 2clk */
.equ B7_SCAN, 0x0 /* 10bit */
/* REFRESH parameter */
.equ REFEN, 0x1 /* Refresh enable */
.equ TREFMD, 0x0 /* CBR(CAS before RAS)/Auto refresh */
.equ Trp, 0x0 /* 2clk */
.equ Trc, 0x3 /* 0x1=5clk 0x3=11clk*/
.equ Tchr, 0x0 /* 0x2=3clk 0x0=0clks */
.equ REFCNT, 879
MEMORY_CONFIG:
.long 0x12111900 /* Bank0 = OM[1:0] , Bank1-7 16bit, Bank2=Nowait,UB/LB*/
.word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) /*GCS0*/
.word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) /*GCS1*/
.word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) /*GCS2*/
.word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) /*GCS3*/
.word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) /*GCS4*/
.word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) /*GCS5*/
.word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) /*GCS6*/
.word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) /*GCS7*/
.word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) /*REFRESH RFEN=1, TREFMD=0, trp=3clk, trc=5clk, tchr=3clk,count=1019*/
.word 0x17 /*SCLK power down mode, BANKSIZE 16M/16M*/
.word 0x20 /*MRSR6 CL=2clk*/
.word 0x20 /*MRSR7*/
.globl memsetup
memsetup:
/*
the next instruction fail due memory relocation...
we'll find the right MEMORY_CONFIG address with the next 3 lines...
*/
/*ldr r0, =MEMORY_CONFIG*/
mov r0, pc
ldr r1, =(0x38+4)
sub r0, r0, r1
ldmia r0, {r1-r13}
ldr r0, =0x01c80000
stmia r0, {r1-r13}
mov pc, lr