| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2012-2019 Altera Corporation <www.altera.com> |
| */ |
| |
| #include <common.h> |
| #include <cpu_func.h> |
| #include <hang.h> |
| #include <init.h> |
| #include <asm/global_data.h> |
| #include <asm/io.h> |
| #include <asm/pl310.h> |
| #include <asm/u-boot.h> |
| #include <asm/utils.h> |
| #include <image.h> |
| #include <asm/arch/reset_manager.h> |
| #include <spl.h> |
| #include <asm/arch/system_manager.h> |
| #include <asm/arch/freeze_controller.h> |
| #include <asm/arch/clock_manager.h> |
| #include <asm/arch/scan_manager.h> |
| #include <asm/arch/sdram.h> |
| #include <asm/arch/scu.h> |
| #include <asm/arch/misc.h> |
| #include <asm/arch/nic301.h> |
| #include <asm/sections.h> |
| #include <fdtdec.h> |
| #include <watchdog.h> |
| #include <asm/arch/pinmux.h> |
| #include <asm/arch/fpga_manager.h> |
| #include <mmc.h> |
| #include <memalign.h> |
| |
| #define FPGA_BUFSIZ 16 * 1024 |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define BOOTROM_SHARED_MEM_SIZE 0x800 /* 2KB */ |
| #define BOOTROM_SHARED_MEM_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ |
| SOCFPGA_PHYS_OCRAM_SIZE - \ |
| BOOTROM_SHARED_MEM_SIZE) |
| #define RST_STATUS_SHARED_ADDR (BOOTROM_SHARED_MEM_ADDR + 0x438) |
| static u32 rst_mgr_status __section(".data"); |
| |
| /* |
| * Bootrom will clear the status register in reset manager and stores the |
| * reset status value in shared memory. Bootrom stores shared data at last |
| * 2KB of onchip RAM. |
| * This function save reset status provided by BootROM to rst_mgr_status. |
| * More information about reset status register value can be found in reset |
| * manager register description. |
| * When running in debugger without Bootrom, r0 to r3 are random values. |
| * So, skip save the value when r0 is not BootROM shared data address. |
| * |
| * r0 - Contains the pointer to the shared memory block. The shared |
| * memory block is located in the top 2 KB of on-chip RAM. |
| * r1 - contains the length of the shared memory. |
| * r2 - unused and set to 0x0. |
| * r3 - points to the version block. |
| */ |
| void save_boot_params(unsigned long r0, unsigned long r1, unsigned long r2, |
| unsigned long r3) |
| { |
| if (r0 == BOOTROM_SHARED_MEM_ADDR) |
| rst_mgr_status = readl(RST_STATUS_SHARED_ADDR); |
| |
| save_boot_params_ret(); |
| } |
| |
| u32 spl_boot_device(void) |
| { |
| const u32 bsel = readl(socfpga_get_sysmgr_addr() + SYSMGR_A10_BOOTINFO); |
| |
| switch (SYSMGR_GET_BOOTINFO_BSEL(bsel)) { |
| case 0x1: /* FPGA (HPS2FPGA Bridge) */ |
| return BOOT_DEVICE_RAM; |
| case 0x2: /* NAND Flash (1.8V) */ |
| case 0x3: /* NAND Flash (3.0V) */ |
| socfpga_per_reset(SOCFPGA_RESET(NAND), 0); |
| return BOOT_DEVICE_NAND; |
| case 0x4: /* SD/MMC External Transceiver (1.8V) */ |
| case 0x5: /* SD/MMC Internal Transceiver (3.0V) */ |
| socfpga_per_reset(SOCFPGA_RESET(SDMMC), 0); |
| socfpga_per_reset(SOCFPGA_RESET(DMA), 0); |
| return BOOT_DEVICE_MMC1; |
| case 0x6: /* QSPI Flash (1.8V) */ |
| case 0x7: /* QSPI Flash (3.0V) */ |
| socfpga_per_reset(SOCFPGA_RESET(QSPI), 0); |
| return BOOT_DEVICE_SPI; |
| default: |
| printf("Invalid boot device (bsel=%08x)!\n", bsel); |
| hang(); |
| } |
| } |
| |
| #ifdef CONFIG_SPL_MMC_SUPPORT |
| u32 spl_mmc_boot_mode(const u32 boot_device) |
| { |
| #if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4) |
| return MMCSD_MODE_FS; |
| #else |
| return MMCSD_MODE_RAW; |
| #endif |
| } |
| #endif |
| |
| void spl_board_init(void) |
| { |
| ALLOC_CACHE_ALIGN_BUFFER(char, buf, FPGA_BUFSIZ); |
| |
| /* enable console uart printing */ |
| preloader_console_init(); |
| WATCHDOG_RESET(); |
| |
| arch_early_init_r(); |
| |
| /* If the full FPGA is already loaded, ie.from EPCQ, config fpga pins */ |
| if (is_fpgamgr_user_mode()) { |
| int ret = config_pins(gd->fdt_blob, "shared"); |
| |
| if (ret) |
| return; |
| |
| ret = config_pins(gd->fdt_blob, "fpga"); |
| if (ret) |
| return; |
| } else if (!is_fpgamgr_early_user_mode()) { |
| /* Program IOSSM(early IO release) or full FPGA */ |
| fpgamgr_program(buf, FPGA_BUFSIZ, 0); |
| } |
| |
| /* If the IOSSM/full FPGA is already loaded, start DDR */ |
| if (is_fpgamgr_early_user_mode() || is_fpgamgr_user_mode()) |
| ddr_calibration_sequence(); |
| |
| if (!is_fpgamgr_user_mode()) |
| fpgamgr_program(buf, FPGA_BUFSIZ, 0); |
| } |
| |
| void board_init_f(ulong dummy) |
| { |
| if (spl_early_init()) |
| hang(); |
| |
| socfpga_get_managers_addr(); |
| |
| dcache_disable(); |
| |
| socfpga_init_security_policies(); |
| socfpga_sdram_remap_zero(); |
| socfpga_pl310_clear(); |
| |
| /* Assert reset to all except L4WD0 and L4TIMER0 */ |
| socfpga_per_reset_all(); |
| socfpga_watchdog_disable(); |
| |
| /* Configure the clock based on handoff */ |
| cm_basic_init(gd->fdt_blob); |
| |
| #ifdef CONFIG_HW_WATCHDOG |
| /* release osc1 watchdog timer 0 from reset */ |
| socfpga_reset_deassert_osc1wd0(); |
| |
| /* reconfigure and enable the watchdog */ |
| hw_watchdog_init(); |
| WATCHDOG_RESET(); |
| #endif /* CONFIG_HW_WATCHDOG */ |
| |
| config_dedicated_pins(gd->fdt_blob); |
| WATCHDOG_RESET(); |
| } |