| /* |
| * Copyright (C) 2004 Arabella Software Ltd. |
| * Yuli Barcohen <yuli@arabellasw.com> |
| * |
| * Support for Analogue&Micro Adder boards family. |
| * Tested on AdderII and Adder87x. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <mpc8xx.h> |
| |
| /* |
| * SDRAM is single Samsung K4S643232F-T70 chip. |
| * Minimal CPU frequency is 40MHz. |
| */ |
| static uint sdram_table[] = { |
| /* Single read (offset 0x00 in UPM RAM) */ |
| 0x1f07fc24, 0xe0aefc04, 0x10adfc04, 0xe0bbbc00, |
| 0x10f77c44, 0xf3fffc07, 0xfffffc04, 0xfffffc04, |
| |
| /* Burst read (offset 0x08 in UPM RAM) */ |
| 0x1f07fc24, 0xe0aefc04, 0x10adfc04, 0xf0affc00, |
| 0xf0affc00, 0xf0affc00, 0xf0affc00, 0x10a77c44, |
| 0xf7bffc47, 0xfffffc35, 0xfffffc34, 0xfffffc35, |
| 0xfffffc35, 0x1ff77c35, 0xfffffc34, 0x1fb57c35, |
| |
| /* Single write (offset 0x18 in UPM RAM) */ |
| 0x1f27fc24, 0xe0aebc04, 0x00b93c00, 0x13f77c47, |
| 0xfffdfc04, 0xfffffc04, 0xfffffc04, 0xfffffc04, |
| |
| /* Burst write (offset 0x20 in UPM RAM) */ |
| 0x1f07fc24, 0xeeaebc00, 0x10ad7c00, 0xf0affc00, |
| 0xf0affc00, 0xe0abbc00, 0x1fb77c47, 0xfffffc04, |
| 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04, |
| 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04, |
| |
| /* Refresh (offset 0x30 in UPM RAM) */ |
| 0x1ff5fca4, 0xfffffc04, 0xfffffc04, 0xfffffc04, |
| 0xfffffc84, 0xfffffc07, 0xfffffc04, 0xfffffc04, |
| 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04, |
| |
| /* Exception (offset 0x3C in UPM RAM) */ |
| 0xfffffc27, 0xfffffc04, 0xfffffc04, 0xfffffc04 |
| }; |
| |
| long int initdram (int board_type) |
| { |
| long int msize = CFG_SDRAM_SIZE; |
| volatile immap_t *immap = (volatile immap_t *)CFG_IMMR; |
| volatile memctl8xx_t *memctl = &immap->im_memctl; |
| |
| upmconfig(UPMA, sdram_table, sizeof(sdram_table) / sizeof(uint)); |
| |
| /* Configure SDRAM refresh */ |
| memctl->memc_mptpr = MPTPR_PTP_DIV32; /* BRGCLK/32 */ |
| |
| memctl->memc_mamr = (94 << 24) | CFG_MAMR; |
| memctl->memc_mar = 0x0; |
| udelay(200); |
| |
| /* Run precharge from location 0x15 */ |
| memctl->memc_mcr = 0x80002115; |
| udelay(200); |
| |
| /* Run 8 refresh cycles */ |
| memctl->memc_mcr = 0x80002830; |
| udelay(200); |
| |
| memctl->memc_mar = 0x88; |
| udelay(200); |
| |
| /* Run MRS pattern from location 0x16 */ |
| memctl->memc_mcr = 0x80002116; |
| udelay(200); |
| |
| return msize; |
| } |
| |
| int checkboard( void ) |
| { |
| puts("Board: Adder"); |
| #if defined(CONFIG_MPC885_FAMILY) |
| puts("87x\n"); |
| #elif defined(CONFIG_MPC866_FAMILY) |
| puts("II\n"); |
| #endif |
| |
| return 0; |
| } |