| /* |
| * (C) Copyright 2007 |
| * Stefan Roese, DENX Software Engineering, sr@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| |
| #if defined(CONFIG_440) |
| |
| #include <ppc440.h> |
| #include <asm/io.h> |
| #include <asm/mmu.h> |
| |
| typedef struct region { |
| unsigned long base; |
| unsigned long size; |
| unsigned long tlb_word2_i_value; |
| } region_t; |
| |
| void remove_tlb(u32 vaddr, u32 size) |
| { |
| int i; |
| u32 tlb_word0_value; |
| u32 tlb_vaddr; |
| u32 tlb_size = 0; |
| |
| /* First, find the index of a TLB entry not being used */ |
| for (i=0; i<PPC4XX_TLB_SIZE; i++) { |
| tlb_word0_value = mftlb1(i); |
| tlb_vaddr = TLB_WORD0_EPN_DECODE(tlb_word0_value); |
| if (((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_ENABLE) && |
| (tlb_vaddr >= vaddr)) { |
| /* |
| * TLB is enabled and start address is lower or equal |
| * than the area we are looking for. Now we only have |
| * to check the size/end address for a match. |
| */ |
| switch (tlb_word0_value & TLB_WORD0_SIZE_MASK) { |
| case TLB_WORD0_SIZE_1KB: |
| tlb_size = 1 << 10; |
| break; |
| case TLB_WORD0_SIZE_4KB: |
| tlb_size = 4 << 10; |
| break; |
| case TLB_WORD0_SIZE_16KB: |
| tlb_size = 16 << 10; |
| break; |
| case TLB_WORD0_SIZE_64KB: |
| tlb_size = 64 << 10; |
| break; |
| case TLB_WORD0_SIZE_256KB: |
| tlb_size = 256 << 10; |
| break; |
| case TLB_WORD0_SIZE_1MB: |
| tlb_size = 1 << 20; |
| break; |
| case TLB_WORD0_SIZE_16MB: |
| tlb_size = 16 << 20; |
| break; |
| case TLB_WORD0_SIZE_256MB: |
| tlb_size = 256 << 20; |
| break; |
| } |
| |
| /* |
| * Now check the end-address if it's in the range |
| */ |
| if ((tlb_vaddr + tlb_size - 1) <= (vaddr + size - 1)) |
| /* |
| * Found a TLB in the range. |
| * Disable it by writing 0 to tlb0 word. |
| */ |
| mttlb1(i, 0); |
| } |
| } |
| |
| /* Execute an ISYNC instruction so that the new TLB entry takes effect */ |
| asm("isync"); |
| } |
| |
| static int add_tlb_entry(unsigned long phys_addr, |
| unsigned long virt_addr, |
| unsigned long tlb_word0_size_value, |
| unsigned long tlb_word2_i_value) |
| { |
| int i; |
| unsigned long tlb_word0_value; |
| unsigned long tlb_word1_value; |
| unsigned long tlb_word2_value; |
| |
| /* First, find the index of a TLB entry not being used */ |
| for (i=0; i<PPC4XX_TLB_SIZE; i++) { |
| tlb_word0_value = mftlb1(i); |
| if ((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_DISABLE) |
| break; |
| } |
| if (i >= PPC4XX_TLB_SIZE) |
| return -1; |
| |
| /* Second, create the TLB entry */ |
| tlb_word0_value = TLB_WORD0_EPN_ENCODE(virt_addr) | TLB_WORD0_V_ENABLE | |
| TLB_WORD0_TS_0 | tlb_word0_size_value; |
| tlb_word1_value = TLB_WORD1_RPN_ENCODE(phys_addr) | TLB_WORD1_ERPN_ENCODE(0); |
| tlb_word2_value = TLB_WORD2_U0_DISABLE | TLB_WORD2_U1_DISABLE | |
| TLB_WORD2_U2_DISABLE | TLB_WORD2_U3_DISABLE | |
| TLB_WORD2_W_DISABLE | tlb_word2_i_value | |
| TLB_WORD2_M_DISABLE | TLB_WORD2_G_DISABLE | |
| TLB_WORD2_E_DISABLE | TLB_WORD2_UX_ENABLE | |
| TLB_WORD2_UW_ENABLE | TLB_WORD2_UR_ENABLE | |
| TLB_WORD2_SX_ENABLE | TLB_WORD2_SW_ENABLE | |
| TLB_WORD2_SR_ENABLE; |
| |
| /* Wait for all memory accesses to complete */ |
| sync(); |
| |
| /* Third, add the TLB entries */ |
| mttlb1(i, tlb_word0_value); |
| mttlb2(i, tlb_word1_value); |
| mttlb3(i, tlb_word2_value); |
| |
| /* Execute an ISYNC instruction so that the new TLB entry takes effect */ |
| asm("isync"); |
| |
| return 0; |
| } |
| |
| static void program_tlb_addr(unsigned long phys_addr, |
| unsigned long virt_addr, |
| unsigned long mem_size, |
| unsigned long tlb_word2_i_value) |
| { |
| int rc; |
| int tlb_i; |
| |
| tlb_i = tlb_word2_i_value; |
| while (mem_size != 0) { |
| rc = 0; |
| /* Add the TLB entries in to map the region. */ |
| if (((phys_addr & TLB_256MB_ALIGN_MASK) == phys_addr) && |
| (mem_size >= TLB_256MB_SIZE)) { |
| /* Add a 256MB TLB entry */ |
| if ((rc = add_tlb_entry(phys_addr, virt_addr, |
| TLB_WORD0_SIZE_256MB, tlb_i)) == 0) { |
| mem_size -= TLB_256MB_SIZE; |
| phys_addr += TLB_256MB_SIZE; |
| virt_addr += TLB_256MB_SIZE; |
| } |
| } else if (((phys_addr & TLB_16MB_ALIGN_MASK) == phys_addr) && |
| (mem_size >= TLB_16MB_SIZE)) { |
| /* Add a 16MB TLB entry */ |
| if ((rc = add_tlb_entry(phys_addr, virt_addr, |
| TLB_WORD0_SIZE_16MB, tlb_i)) == 0) { |
| mem_size -= TLB_16MB_SIZE; |
| phys_addr += TLB_16MB_SIZE; |
| virt_addr += TLB_16MB_SIZE; |
| } |
| } else if (((phys_addr & TLB_1MB_ALIGN_MASK) == phys_addr) && |
| (mem_size >= TLB_1MB_SIZE)) { |
| /* Add a 1MB TLB entry */ |
| if ((rc = add_tlb_entry(phys_addr, virt_addr, |
| TLB_WORD0_SIZE_1MB, tlb_i)) == 0) { |
| mem_size -= TLB_1MB_SIZE; |
| phys_addr += TLB_1MB_SIZE; |
| virt_addr += TLB_1MB_SIZE; |
| } |
| } else if (((phys_addr & TLB_256KB_ALIGN_MASK) == phys_addr) && |
| (mem_size >= TLB_256KB_SIZE)) { |
| /* Add a 256KB TLB entry */ |
| if ((rc = add_tlb_entry(phys_addr, virt_addr, |
| TLB_WORD0_SIZE_256KB, tlb_i)) == 0) { |
| mem_size -= TLB_256KB_SIZE; |
| phys_addr += TLB_256KB_SIZE; |
| virt_addr += TLB_256KB_SIZE; |
| } |
| } else if (((phys_addr & TLB_64KB_ALIGN_MASK) == phys_addr) && |
| (mem_size >= TLB_64KB_SIZE)) { |
| /* Add a 64KB TLB entry */ |
| if ((rc = add_tlb_entry(phys_addr, virt_addr, |
| TLB_WORD0_SIZE_64KB, tlb_i)) == 0) { |
| mem_size -= TLB_64KB_SIZE; |
| phys_addr += TLB_64KB_SIZE; |
| virt_addr += TLB_64KB_SIZE; |
| } |
| } else if (((phys_addr & TLB_16KB_ALIGN_MASK) == phys_addr) && |
| (mem_size >= TLB_16KB_SIZE)) { |
| /* Add a 16KB TLB entry */ |
| if ((rc = add_tlb_entry(phys_addr, virt_addr, |
| TLB_WORD0_SIZE_16KB, tlb_i)) == 0) { |
| mem_size -= TLB_16KB_SIZE; |
| phys_addr += TLB_16KB_SIZE; |
| virt_addr += TLB_16KB_SIZE; |
| } |
| } else if (((phys_addr & TLB_4KB_ALIGN_MASK) == phys_addr) && |
| (mem_size >= TLB_4KB_SIZE)) { |
| /* Add a 4KB TLB entry */ |
| if ((rc = add_tlb_entry(phys_addr, virt_addr, |
| TLB_WORD0_SIZE_4KB, tlb_i)) == 0) { |
| mem_size -= TLB_4KB_SIZE; |
| phys_addr += TLB_4KB_SIZE; |
| virt_addr += TLB_4KB_SIZE; |
| } |
| } else if (((phys_addr & TLB_1KB_ALIGN_MASK) == phys_addr) && |
| (mem_size >= TLB_1KB_SIZE)) { |
| /* Add a 1KB TLB entry */ |
| if ((rc = add_tlb_entry(phys_addr, virt_addr, |
| TLB_WORD0_SIZE_1KB, tlb_i)) == 0) { |
| mem_size -= TLB_1KB_SIZE; |
| phys_addr += TLB_1KB_SIZE; |
| virt_addr += TLB_1KB_SIZE; |
| } |
| } else { |
| printf("ERROR: no TLB size exists for the base address 0x%0X.\n", |
| phys_addr); |
| } |
| |
| if (rc != 0) |
| printf("ERROR: no TLB entries available for the base addr 0x%0X.\n", |
| phys_addr); |
| } |
| |
| return; |
| } |
| |
| /* |
| * Program one (or multiple) TLB entries for one memory region |
| * |
| * Common usage for boards with SDRAM DIMM modules to dynamically |
| * configure the TLB's for the SDRAM |
| */ |
| void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value) |
| { |
| region_t region_array; |
| |
| region_array.base = phys_addr; |
| region_array.size = size; |
| region_array.tlb_word2_i_value = tlb_word2_i_value; /* en-/disable cache */ |
| |
| /* Call the routine to add in the tlb entries for the memory regions */ |
| program_tlb_addr(region_array.base, virt_addr, region_array.size, |
| region_array.tlb_word2_i_value); |
| |
| return; |
| } |
| |
| #endif /* CONFIG_440 */ |