| /* |
| * (C) Copyright 2009, 2010 Wolfgang Denk <wd@denx.de> |
| * |
| * (C) Copyright 2009-2010 |
| * Michael Weiß, ifm ecomatic gmbh, michael.weiss@ifm.com |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <asm/bitops.h> |
| #include <command.h> |
| #include <asm/io.h> |
| #include <asm/processor.h> |
| #include <asm/mpc512x.h> |
| #include <fdt_support.h> |
| #include <flash.h> |
| #ifdef CONFIG_MISC_INIT_R |
| #include <i2c.h> |
| #endif |
| #include <serial.h> |
| #include <jffs2/load_kernel.h> |
| #include <mtd_node.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| extern flash_info_t flash_info[]; |
| ulong flash_get_size (phys_addr_t base, int banknum); |
| |
| sdram_conf_t mddrc_config[] = { |
| { |
| (512 << 20), /* 512 MB RAM configuration */ |
| { |
| CONFIG_SYS_MDDRC_SYS_CFG, |
| CONFIG_SYS_MDDRC_TIME_CFG0, |
| CONFIG_SYS_MDDRC_TIME_CFG1, |
| CONFIG_SYS_MDDRC_TIME_CFG2 |
| } |
| }, |
| { |
| (128 << 20), /* 128 MB RAM configuration */ |
| { |
| CONFIG_SYS_MDDRC_SYS_CFG_ALT1, |
| CONFIG_SYS_MDDRC_TIME_CFG0_ALT1, |
| CONFIG_SYS_MDDRC_TIME_CFG1_ALT1, |
| CONFIG_SYS_MDDRC_TIME_CFG2_ALT1 |
| } |
| }, |
| }; |
| |
| int initdram(void) |
| { |
| int i; |
| u32 msize = 0; |
| u32 pdm360ng_init_seq[] = { |
| CONFIG_SYS_DDRCMD_NOP, |
| CONFIG_SYS_DDRCMD_NOP, |
| CONFIG_SYS_DDRCMD_NOP, |
| CONFIG_SYS_DDRCMD_NOP, |
| CONFIG_SYS_DDRCMD_NOP, |
| CONFIG_SYS_DDRCMD_NOP, |
| CONFIG_SYS_DDRCMD_NOP, |
| CONFIG_SYS_DDRCMD_NOP, |
| CONFIG_SYS_DDRCMD_NOP, |
| CONFIG_SYS_DDRCMD_NOP, |
| CONFIG_SYS_DDRCMD_PCHG_ALL, |
| CONFIG_SYS_DDRCMD_NOP, |
| CONFIG_SYS_DDRCMD_RFSH, |
| CONFIG_SYS_DDRCMD_NOP, |
| CONFIG_SYS_DDRCMD_RFSH, |
| CONFIG_SYS_DDRCMD_NOP, |
| CONFIG_SYS_MICRON_INIT_DEV_OP, |
| CONFIG_SYS_DDRCMD_NOP, |
| CONFIG_SYS_DDRCMD_EM2, |
| CONFIG_SYS_DDRCMD_NOP, |
| CONFIG_SYS_DDRCMD_PCHG_ALL, |
| CONFIG_SYS_DDRCMD_EM2, |
| CONFIG_SYS_DDRCMD_EM3, |
| CONFIG_SYS_DDRCMD_EN_DLL, |
| CONFIG_SYS_DDRCMD_RES_DLL, |
| CONFIG_SYS_DDRCMD_PCHG_ALL, |
| CONFIG_SYS_DDRCMD_RFSH, |
| CONFIG_SYS_DDRCMD_RFSH, |
| CONFIG_SYS_MICRON_INIT_DEV_OP, |
| CONFIG_SYS_DDRCMD_OCD_DEFAULT, |
| CONFIG_SYS_DDRCMD_OCD_EXIT, |
| CONFIG_SYS_DDRCMD_PCHG_ALL, |
| CONFIG_SYS_DDRCMD_NOP |
| }; |
| |
| for (i = 0; i < ARRAY_SIZE(mddrc_config); i++) { |
| msize = fixed_sdram(&mddrc_config[i].cfg, pdm360ng_init_seq, |
| ARRAY_SIZE(pdm360ng_init_seq)); |
| if (msize == mddrc_config[i].size) |
| break; |
| } |
| |
| gd->ram_size = msize; |
| |
| return 0; |
| } |
| |
| static int set_lcd_brightness(char *); |
| |
| int misc_init_r(void) |
| { |
| volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; |
| |
| /* |
| * Re-configure flash setup using auto-detected info |
| */ |
| if (flash_info[1].size > 0) { |
| out_be32(&im->sysconf.lpcs1aw, |
| CSAW_START(gd->bd->bi_flashstart + flash_info[1].size) | |
| CSAW_STOP(gd->bd->bi_flashstart + flash_info[1].size, |
| flash_info[1].size)); |
| sync_law(&im->sysconf.lpcs1aw); |
| /* |
| * Re-check to get correct base address |
| */ |
| flash_get_size (gd->bd->bi_flashstart + flash_info[1].size, 1); |
| } else { |
| /* Disable Bank 1 */ |
| out_be32(&im->sysconf.lpcs1aw, 0x01000100); |
| sync_law(&im->sysconf.lpcs1aw); |
| } |
| |
| out_be32(&im->sysconf.lpcs0aw, |
| CSAW_START(gd->bd->bi_flashstart) | |
| CSAW_STOP(gd->bd->bi_flashstart, flash_info[0].size)); |
| sync_law(&im->sysconf.lpcs0aw); |
| |
| /* |
| * Re-check to get correct base address |
| */ |
| flash_get_size (gd->bd->bi_flashstart, 0); |
| |
| /* |
| * Re-do flash protection upon new addresses |
| */ |
| flash_protect (FLAG_PROTECT_CLEAR, |
| gd->bd->bi_flashstart, 0xffffffff, |
| &flash_info[0]); |
| |
| /* Monitor protection ON by default */ |
| flash_protect (FLAG_PROTECT_SET, |
| CONFIG_SYS_MONITOR_BASE, |
| CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1, |
| &flash_info[0]); |
| |
| /* Environment protection ON by default */ |
| flash_protect (FLAG_PROTECT_SET, |
| CONFIG_ENV_ADDR, |
| CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, |
| &flash_info[0]); |
| |
| #ifdef CONFIG_ENV_ADDR_REDUND |
| /* Redundant environment protection ON by default */ |
| flash_protect (FLAG_PROTECT_SET, |
| CONFIG_ENV_ADDR_REDUND, |
| CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1, |
| &flash_info[0]); |
| #endif |
| |
| #ifdef CONFIG_FSL_DIU_FB |
| set_lcd_brightness(0); |
| /* Switch LCD-Backlight and LVDS-Interface on */ |
| setbits_be32(&im->gpio.gpdir, 0x01040000); |
| clrsetbits_be32(&im->gpio.gpdat, 0x01000000, 0x00040000); |
| #endif |
| |
| #if defined(CONFIG_HARD_I2C) |
| if (!getenv("ethaddr")) { |
| uchar buf[6]; |
| uchar ifm_oui[3] = { 0, 2, 1, }; |
| int ret; |
| |
| /* I2C-0 for on-board eeprom */ |
| i2c_set_bus_num(CONFIG_SYS_I2C_EEPROM_BUS_NUM); |
| |
| /* Read ethaddr from EEPROM */ |
| ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, |
| CONFIG_SYS_I2C_EEPROM_MAC_OFFSET, 1, buf, 6); |
| if (ret != 0) { |
| printf("Error: Unable to read MAC from I2C" |
| " EEPROM at address %02X:%02X\n", |
| CONFIG_SYS_I2C_EEPROM_ADDR, |
| CONFIG_SYS_I2C_EEPROM_MAC_OFFSET); |
| return 1; |
| } |
| |
| /* Owned by IFM ? */ |
| if (memcmp(buf, ifm_oui, sizeof(ifm_oui))) { |
| printf("Illegal MAC address in EEPROM: %pM\n", buf); |
| return 1; |
| } |
| |
| eth_setenv_enetaddr("ethaddr", buf); |
| } |
| #endif /* defined(CONFIG_HARD_I2C) */ |
| |
| return 0; |
| } |
| |
| static iopin_t ioregs_init[] = { |
| /* FUNC1=LPC_CS4 */ |
| { |
| offsetof(struct ioctrl512x, io_control_pata_ce1), 1, 0, |
| IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(1) | |
| IO_PIN_PUE(1) | IO_PIN_ST(0) | IO_PIN_DS(3) |
| }, |
| /* FUNC3=GPIO10 */ |
| { |
| offsetof(struct ioctrl512x, io_control_pata_ce2), 1, 0, |
| IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | |
| IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0) |
| }, |
| /* FUNC1=CAN3_TX */ |
| { |
| offsetof(struct ioctrl512x, io_control_pata_isolate), 1, 0, |
| IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | |
| IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0) |
| }, |
| /* FUNC3=GPIO14 */ |
| { |
| offsetof(struct ioctrl512x, io_control_pata_iochrdy), 1, 0, |
| IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | |
| IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0) |
| }, |
| /* FUNC2=DIU_LD22 Sets Next 2 to DIU_LD pads */ |
| /* DIU_LD22-DIU_LD23 */ |
| { |
| offsetof(struct ioctrl512x, io_control_pci_ad31), 2, 0, |
| IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | |
| IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1) |
| }, |
| /* FUNC2=USB1_DATA7 Sets Next 12 to USB1 pads */ |
| /* USB1_DATA7-USB1_DATA0, USB1_STOP, USB1_NEXT, USB1_CLK, USB1_DIR */ |
| { |
| offsetof(struct ioctrl512x, io_control_pci_ad29), 12, 0, |
| IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | |
| IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1) |
| }, |
| /* FUNC1=VIU_DATA0 Sets Next 3 to VIU_DATA pads */ |
| /* VIU_DATA0-VIU_DATA2 */ |
| { |
| offsetof(struct ioctrl512x, io_control_pci_ad17), 3, 0, |
| IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | |
| IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1) |
| }, |
| /* FUNC2=FEC_TXD_0 */ |
| { |
| offsetof(struct ioctrl512x, io_control_pci_ad14), 1, 0, |
| IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | |
| IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1) |
| }, |
| /* FUNC1=VIU_DATA3 Sets Next 2 to VIU_DATA pads */ |
| /* VIU_DATA3, VIU_DATA4 */ |
| { |
| offsetof(struct ioctrl512x, io_control_pci_ad13), 2, 0, |
| IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | |
| IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1) |
| }, |
| /* FUNC2=FEC_RXD_1 Sets Next 12 to FEC pads */ |
| /* FEC_RXD_1, FEC_RXD_0, FEC_RX_CLK, FEC_TX_CLK, FEC_RX_ER, FEC_RX_DV */ |
| /* FEC_TX_EN, FEC_TX_ER, FEC_CRS, FEC_MDC, FEC_MDIO, FEC_COL */ |
| { |
| offsetof(struct ioctrl512x, io_control_pci_ad11), 12, 0, |
| IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | |
| IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1) |
| }, |
| /* FUNC2=DIU_LD03 Sets Next 25 to DIU pads */ |
| /* DIU_LD00-DIU_LD21 */ |
| { |
| offsetof(struct ioctrl512x, io_control_pci_cbe0), 22, 0, |
| IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | |
| IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1) |
| }, |
| /* FUNC2=DIU_CLK Sets Next 3 to DIU pads */ |
| /* DIU_CLK, DIU_VSYNC, DIU_HSYNC */ |
| { |
| offsetof(struct ioctrl512x, io_control_spdif_txclk), 3, 0, |
| IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | |
| IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) |
| }, |
| /* FUNC2=CAN3_RX */ |
| { |
| offsetof(struct ioctrl512x, io_control_irq1), 1, 0, |
| IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | |
| IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0) |
| }, |
| /* Sets lowest slew on 2 CAN_TX Pins*/ |
| { |
| offsetof(struct ioctrl512x, io_control_can1_tx), 2, 0, |
| IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | |
| IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0) |
| }, |
| /* FUNC3=CAN4_TX Sets Next 2 to CAN4 pads */ |
| /* CAN4_TX, CAN4_RX */ |
| { |
| offsetof(struct ioctrl512x, io_control_j1850_tx), 2, 0, |
| IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | |
| IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0) |
| }, |
| /* FUNC3=GPIO8 Sets Next 2 to GPIO pads */ |
| /* GPIO8, GPIO9 */ |
| { |
| offsetof(struct ioctrl512x, io_control_psc0_0), 2, 0, |
| IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | |
| IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0) |
| }, |
| /* FUNC1=FEC_TXD_1 Sets Next 3 to FEC pads */ |
| /* FEC_TXD_1, FEC_TXD_2, FEC_TXD_3 */ |
| { |
| offsetof(struct ioctrl512x, io_control_psc0_4), 3, 0, |
| IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | |
| IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) |
| }, |
| /* FUNC1=FEC_RXD_3 Sets Next 2 to FEC pads */ |
| /* FEC_RXD_3, FEC_RXD_2 */ |
| { |
| offsetof(struct ioctrl512x, io_control_psc1_4), 2, 0, |
| IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | |
| IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) |
| }, |
| /* FUNC3=GPIO17 */ |
| { |
| offsetof(struct ioctrl512x, io_control_psc2_1), 1, 0, |
| IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | |
| IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0) |
| }, |
| /* FUNC3=GPIO2/GPT2 Sets Next 3 to GPIO pads */ |
| /* GPIO2, GPIO20, GPIO21 */ |
| { |
| offsetof(struct ioctrl512x, io_control_psc2_4), 3, 0, |
| IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | |
| IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0) |
| }, |
| /* FUNC2=VIU_PIX_CLK */ |
| { |
| offsetof(struct ioctrl512x, io_control_psc3_4), 1, 0, |
| IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | |
| IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) |
| }, |
| /* FUNC3=GPIO24 Sets Next 2 to GPIO pads */ |
| /* GPIO24, GPIO25 */ |
| { |
| offsetof(struct ioctrl512x, io_control_psc4_0), 2, 0, |
| IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | |
| IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0) |
| }, |
| /* FUNC1=NFC_CE2 */ |
| { |
| offsetof(struct ioctrl512x, io_control_psc4_4), 1, 0, |
| IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(1) | |
| IO_PIN_PUE(1) | IO_PIN_ST(0) | IO_PIN_DS(0) |
| }, |
| /* FUNC2=VIU_DATA5 Sets Next 5 to VIU_DATA pads */ |
| /* VIU_DATA5-VIU_DATA9 */ |
| { |
| offsetof(struct ioctrl512x, io_control_psc5_0), 5, 0, |
| IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | |
| IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) |
| }, |
| /* FUNC1=LPC_TSIZ1 Sets Next 2 to LPC_TSIZ pads */ |
| /* LPC_TSIZ1-LPC_TSIZ2 */ |
| { |
| offsetof(struct ioctrl512x, io_control_psc6_0), 2, 0, |
| IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | |
| IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) |
| }, |
| /* FUNC1=LPC_TS */ |
| { |
| offsetof(struct ioctrl512x, io_control_psc6_4), 1, 0, |
| IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | |
| IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) |
| }, |
| /* FUNC3=GPIO16 */ |
| { |
| offsetof(struct ioctrl512x, io_control_psc7_0), 1, 0, |
| IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | |
| IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0) |
| }, |
| /* FUNC3=GPIO18 Sets Next 3 to GPIO pads */ |
| /* GPIO18-GPIO19, GPT7/GPIO7 */ |
| { |
| offsetof(struct ioctrl512x, io_control_psc7_2), 3, 0, |
| IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | |
| IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0) |
| }, |
| /* FUNC3=GPIO0/GPT0 */ |
| { |
| offsetof(struct ioctrl512x, io_control_psc8_4), 1, 0, |
| IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | |
| IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0) |
| }, |
| /* FUNC3=GPIO11 Sets Next 4 to GPIO pads */ |
| /* GPIO11, GPIO2, GPIO12, GPIO13 */ |
| { |
| offsetof(struct ioctrl512x, io_control_psc10_3), 4, 0, |
| IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | |
| IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0) |
| }, |
| /* FUNC2=DIU_DE */ |
| { |
| offsetof(struct ioctrl512x, io_control_psc11_4), 1, 0, |
| IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | |
| IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) |
| } |
| }; |
| |
| int checkboard (void) |
| { |
| volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; |
| |
| puts("Board: PDM360NG\n"); |
| |
| /* initialize function mux & slew rate IO inter alia on IO Pins */ |
| |
| iopin_initialize(ioregs_init, ARRAY_SIZE(ioregs_init)); |
| |
| /* initialize IO_CONTROL_GP (GPIO/GPT-mux-register) */ |
| setbits_be32(&im->io_ctrl.io_control_gp, |
| (1 << 0) | /* GP_MUX7->GPIO7 */ |
| (1 << 5)); /* GP_MUX2->GPIO2 */ |
| |
| /* configure GPIO24 (VIU_CE), output/high */ |
| setbits_be32(&im->gpio.gpdir, 0x80); |
| setbits_be32(&im->gpio.gpdat, 0x80); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_OF_BOARD_SETUP |
| #ifdef CONFIG_FDT_FIXUP_PARTITIONS |
| struct node_info nodes[] = { |
| { "fsl,mpc5121-nfc", MTD_DEV_TYPE_NAND, }, |
| { "cfi-flash", MTD_DEV_TYPE_NOR, }, |
| }; |
| #endif |
| |
| #if defined(CONFIG_VIDEO) |
| /* |
| * EDID block has been generated using Phoenix EDID Designer 1.3. |
| * This tool creates a text file containing: |
| * |
| * EDID BYTES: |
| * 0x 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F |
| * ------------------------------------------------ |
| * 00 | 00 FF FF FF FF FF FF 00 42 C9 34 12 01 00 00 00 |
| * 10 | 0A 0C 01 03 80 98 5B 78 CA 7E 50 A0 58 4E 96 25 |
| * 20 | 1E 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 |
| * 30 | 01 01 01 01 01 01 80 0C 20 00 31 E0 2D 10 2A 80 |
| * 40 | 12 08 30 E4 10 00 00 18 00 00 00 FD 00 38 3C 1F |
| * 50 | 3C 04 0A 20 20 20 20 20 20 20 00 00 00 FF 00 50 |
| * 60 | 4D 30 37 30 57 4C 33 0A 0A 0A 0A 0A 00 00 00 FF |
| * 70 | 00 41 30 30 30 30 30 30 30 30 30 30 30 31 00 D4 |
| * |
| * Then this data has been manually converted to the char |
| * array below. |
| */ |
| static unsigned char edid_buf[128] = { |
| 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, |
| 0x42, 0xC9, 0x34, 0x12, 0x01, 0x00, 0x00, 0x00, |
| 0x0A, 0x0C, 0x01, 0x03, 0x80, 0x98, 0x5B, 0x78, |
| 0xCA, 0x7E, 0x50, 0xA0, 0x58, 0x4E, 0x96, 0x25, |
| 0x1E, 0x50, 0x54, 0x00, 0x00, 0x00, 0x01, 0x01, |
| 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, |
| 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x80, 0x0C, |
| 0x20, 0x00, 0x31, 0xE0, 0x2D, 0x10, 0x2A, 0x80, |
| 0x12, 0x08, 0x30, 0xE4, 0x10, 0x00, 0x00, 0x18, |
| 0x00, 0x00, 0x00, 0xFD, 0x00, 0x38, 0x3C, 0x1F, |
| 0x3C, 0x04, 0x0A, 0x20, 0x20, 0x20, 0x20, 0x20, |
| 0x20, 0x20, 0x00, 0x00, 0x00, 0xFF, 0x00, 0x50, |
| 0x4D, 0x30, 0x37, 0x30, 0x57, 0x4C, 0x33, 0x0A, |
| 0x0A, 0x0A, 0x0A, 0x0A, 0x00, 0x00, 0x00, 0xFF, |
| 0x00, 0x41, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, |
| 0x30, 0x30, 0x30, 0x30, 0x30, 0x31, 0x00, 0xD4, |
| }; |
| #endif |
| |
| int ft_board_setup(void *blob, bd_t *bd) |
| { |
| u32 val[8]; |
| int rc, i = 0; |
| |
| ft_cpu_setup(blob, bd); |
| #ifdef CONFIG_FDT_FIXUP_PARTITIONS |
| fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes)); |
| #endif |
| #if defined(CONFIG_VIDEO) |
| fdt_add_edid(blob, "fsl,mpc5121-diu", edid_buf); |
| #endif |
| |
| /* Fixup NOR FLASH mapping */ |
| val[i++] = 0; /* chip select number */ |
| val[i++] = 0; /* always 0 */ |
| val[i++] = gd->bd->bi_flashstart; |
| val[i++] = gd->bd->bi_flashsize; |
| |
| /* Fixup MRAM mapping */ |
| val[i++] = 2; /* chip select number */ |
| val[i++] = 0; /* always 0 */ |
| val[i++] = CONFIG_SYS_MRAM_BASE; |
| val[i++] = CONFIG_SYS_MRAM_SIZE; |
| |
| rc = fdt_find_and_setprop(blob, "/localbus", "ranges", |
| val, i * sizeof(u32), 1); |
| if (rc) |
| printf("Unable to update localbus ranges, err=%s\n", |
| fdt_strerror(rc)); |
| |
| /* Fixup reg property in NOR Flash node */ |
| i = 0; |
| val[i++] = 0; /* always 0 */ |
| val[i++] = 0; /* start at offset 0 */ |
| val[i++] = flash_info[0].size; /* size of Bank 0 */ |
| |
| /* Second Bank available? */ |
| if (flash_info[1].size > 0) { |
| val[i++] = 0; /* always 0 */ |
| val[i++] = flash_info[0].size; /* offset of Bank 1 */ |
| val[i++] = flash_info[1].size; /* size of Bank 1 */ |
| } |
| |
| rc = fdt_find_and_setprop(blob, "/localbus/flash", "reg", |
| val, i * sizeof(u32), 1); |
| if (rc) |
| printf("Unable to update flash reg property, err=%s\n", |
| fdt_strerror(rc)); |
| |
| return 0; |
| } |
| #endif /* CONFIG_OF_BOARD_SETUP */ |
| |
| /* |
| * If argument is NULL, set the LCD brightness to the |
| * value from "brightness" environment variable. Set |
| * the LCD brightness to the value specified by the |
| * argument otherwise. Default brightness is zero. |
| */ |
| #define MAX_BRIGHTNESS 99 |
| static int set_lcd_brightness(char *brightness) |
| { |
| struct stdio_dev *cop_port; |
| char *env; |
| char cmd_buf[20]; |
| int val = 0; |
| int cs = 0; |
| int len, i; |
| |
| if (brightness) { |
| val = simple_strtol(brightness, NULL, 10); |
| } else { |
| env = getenv("brightness"); |
| if (env) |
| val = simple_strtol(env, NULL, 10); |
| } |
| |
| if (val < 0) |
| val = 0; |
| |
| if (val > MAX_BRIGHTNESS) |
| val = MAX_BRIGHTNESS; |
| |
| sprintf(cmd_buf, "$SB;%04d;", val); |
| |
| len = strlen(cmd_buf); |
| for (i = 1; i <= len; i++) |
| cs += cmd_buf[i]; |
| |
| cs = (~cs + 1) & 0xff; |
| sprintf(cmd_buf + len, "%02X\n", cs); |
| |
| /* IO Coprocessor communication */ |
| cop_port = open_port(4, CONFIG_SYS_PDM360NG_COPROC_BAUDRATE); |
| if (!cop_port) { |
| printf("Error: Can't open IO Coprocessor port.\n"); |
| return -1; |
| } |
| |
| debug("%s: cmd: %s", __func__, cmd_buf); |
| write_port(cop_port, cmd_buf); |
| /* |
| * Wait for transmission and maybe response data |
| * before closing the port. |
| */ |
| udelay(CONFIG_SYS_PDM360NG_COPROC_READ_DELAY); |
| memset(cmd_buf, 0, sizeof(cmd_buf)); |
| len = read_port(cop_port, cmd_buf, sizeof(cmd_buf)); |
| if (len) |
| printf("Error: %s\n", cmd_buf); |
| |
| close_port(4); |
| |
| return 0; |
| } |
| |
| static int cmd_lcd_brightness(cmd_tbl_t *cmdtp, int flag, |
| int argc, char * const argv[]) |
| { |
| if (argc < 2) |
| return cmd_usage(cmdtp); |
| |
| return set_lcd_brightness(argv[1]); |
| } |
| |
| U_BOOT_CMD(lcdbr, 2, 1, cmd_lcd_brightness, |
| "set LCD brightness", |
| "<brightness> - set LCD backlight level to <brightness>.\n" |
| ); |