| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2019 DENX Software Engineering |
| * Lukasz Majewski, DENX Software Engineering, lukma@denx.de |
| */ |
| |
| #include <common.h> |
| #include <clk-uclass.h> |
| #include <dm.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/imx-regs.h> |
| #include <dt-bindings/clock/imx6qdl-clock.h> |
| |
| #include "clk.h" |
| |
| static int imx6q_check_id(ulong id) |
| { |
| if (id < IMX6QDL_CLK_DUMMY || id >= IMX6QDL_CLK_END) { |
| printf("%s: Invalid clk ID #%lu\n", __func__, id); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static ulong imx6q_clk_get_rate(struct clk *clk) |
| { |
| struct clk *c; |
| int ret; |
| |
| debug("%s(#%lu)\n", __func__, clk->id); |
| |
| ret = imx6q_check_id(clk->id); |
| if (ret) |
| return ret; |
| |
| ret = clk_get_by_id(clk->id, &c); |
| if (ret) |
| return ret; |
| |
| return clk_get_rate(c); |
| } |
| |
| static ulong imx6q_clk_set_rate(struct clk *clk, unsigned long rate) |
| { |
| debug("%s(#%lu), rate: %lu\n", __func__, clk->id, rate); |
| |
| return rate; |
| } |
| |
| static int __imx6q_clk_enable(struct clk *clk, bool enable) |
| { |
| struct clk *c; |
| int ret = 0; |
| |
| debug("%s(#%lu) en: %d\n", __func__, clk->id, enable); |
| |
| ret = imx6q_check_id(clk->id); |
| if (ret) |
| return ret; |
| |
| ret = clk_get_by_id(clk->id, &c); |
| if (ret) |
| return ret; |
| |
| if (enable) |
| ret = clk_enable(c); |
| else |
| ret = clk_disable(c); |
| |
| return ret; |
| } |
| |
| static int imx6q_clk_disable(struct clk *clk) |
| { |
| return __imx6q_clk_enable(clk, 0); |
| } |
| |
| static int imx6q_clk_enable(struct clk *clk) |
| { |
| return __imx6q_clk_enable(clk, 1); |
| } |
| |
| static struct clk_ops imx6q_clk_ops = { |
| .set_rate = imx6q_clk_set_rate, |
| .get_rate = imx6q_clk_get_rate, |
| .enable = imx6q_clk_enable, |
| .disable = imx6q_clk_disable, |
| }; |
| |
| static const char *const usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; |
| static const char *const periph_sels[] = { "periph_pre", "periph_clk2", }; |
| static const char *const periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", |
| "pll2_pfd0_352m", "pll2_198m", }; |
| |
| static int imx6q_clk_probe(struct udevice *dev) |
| { |
| void *base; |
| |
| /* Anatop clocks */ |
| base = (void *)ANATOP_BASE_ADDR; |
| |
| clk_dm(IMX6QDL_CLK_PLL2, |
| imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", |
| base + 0x30, 0x1)); |
| clk_dm(IMX6QDL_CLK_PLL3_USB_OTG, |
| imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", |
| base + 0x10, 0x3)); |
| clk_dm(IMX6QDL_CLK_PLL3_60M, |
| imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8)); |
| clk_dm(IMX6QDL_CLK_PLL2_PFD0_352M, |
| imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0)); |
| clk_dm(IMX6QDL_CLK_PLL2_PFD2_396M, |
| imx_clk_pfd("pll2_pfd2_396m", "pll2_bus", base + 0x100, 2)); |
| |
| /* CCM clocks */ |
| base = dev_read_addr_ptr(dev); |
| if (!base) |
| return -EINVAL; |
| |
| clk_dm(IMX6QDL_CLK_USDHC1_SEL, |
| imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1, |
| usdhc_sels, ARRAY_SIZE(usdhc_sels))); |
| clk_dm(IMX6QDL_CLK_USDHC2_SEL, |
| imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1, |
| usdhc_sels, ARRAY_SIZE(usdhc_sels))); |
| clk_dm(IMX6QDL_CLK_USDHC3_SEL, |
| imx_clk_mux("usdhc3_sel", base + 0x1c, 18, 1, |
| usdhc_sels, ARRAY_SIZE(usdhc_sels))); |
| clk_dm(IMX6QDL_CLK_USDHC4_SEL, |
| imx_clk_mux("usdhc4_sel", base + 0x1c, 19, 1, |
| usdhc_sels, ARRAY_SIZE(usdhc_sels))); |
| |
| clk_dm(IMX6QDL_CLK_USDHC1_PODF, |
| imx_clk_divider("usdhc1_podf", "usdhc1_sel", |
| base + 0x24, 11, 3)); |
| clk_dm(IMX6QDL_CLK_USDHC2_PODF, |
| imx_clk_divider("usdhc2_podf", "usdhc2_sel", |
| base + 0x24, 16, 3)); |
| clk_dm(IMX6QDL_CLK_USDHC3_PODF, |
| imx_clk_divider("usdhc3_podf", "usdhc3_sel", |
| base + 0x24, 19, 3)); |
| clk_dm(IMX6QDL_CLK_USDHC4_PODF, |
| imx_clk_divider("usdhc4_podf", "usdhc4_sel", |
| base + 0x24, 22, 3)); |
| |
| clk_dm(IMX6QDL_CLK_ECSPI_ROOT, |
| imx_clk_divider("ecspi_root", "pll3_60m", base + 0x38, 19, 6)); |
| |
| clk_dm(IMX6QDL_CLK_ECSPI1, |
| imx_clk_gate2("ecspi1", "ecspi_root", base + 0x6c, 0)); |
| clk_dm(IMX6QDL_CLK_ECSPI2, |
| imx_clk_gate2("ecspi2", "ecspi_root", base + 0x6c, 2)); |
| clk_dm(IMX6QDL_CLK_ECSPI3, |
| imx_clk_gate2("ecspi3", "ecspi_root", base + 0x6c, 4)); |
| clk_dm(IMX6QDL_CLK_ECSPI4, |
| imx_clk_gate2("ecspi4", "ecspi_root", base + 0x6c, 6)); |
| clk_dm(IMX6QDL_CLK_USDHC1, |
| imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2)); |
| clk_dm(IMX6QDL_CLK_USDHC2, |
| imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4)); |
| clk_dm(IMX6QDL_CLK_USDHC3, |
| imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6)); |
| clk_dm(IMX6QDL_CLK_USDHC4, |
| imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8)); |
| |
| clk_dm(IMX6QDL_CLK_PERIPH_PRE, |
| imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, |
| ARRAY_SIZE(periph_pre_sels))); |
| clk_dm(IMX6QDL_CLK_PERIPH, |
| imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, |
| 5, periph_sels, ARRAY_SIZE(periph_sels))); |
| clk_dm(IMX6QDL_CLK_AHB, |
| imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, |
| base + 0x48, 1)); |
| clk_dm(IMX6QDL_CLK_IPG, |
| imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2)); |
| clk_dm(IMX6QDL_CLK_IPG_PER, |
| imx_clk_divider("ipg_per", "ipg", base + 0x1c, 0, 6)); |
| clk_dm(IMX6QDL_CLK_I2C1, |
| imx_clk_gate2("i2c1", "ipg_per", base + 0x70, 6)); |
| clk_dm(IMX6QDL_CLK_I2C2, |
| imx_clk_gate2("i2c2", "ipg_per", base + 0x70, 8)); |
| |
| return 0; |
| } |
| |
| static const struct udevice_id imx6q_clk_ids[] = { |
| { .compatible = "fsl,imx6q-ccm" }, |
| { }, |
| }; |
| |
| U_BOOT_DRIVER(imx6q_clk) = { |
| .name = "clk_imx6q", |
| .id = UCLASS_CLK, |
| .of_match = imx6q_clk_ids, |
| .ops = &imx6q_clk_ops, |
| .probe = imx6q_clk_probe, |
| .flags = DM_FLAG_PRE_RELOC, |
| }; |