CONFIG_ARM=y | |
CONFIG_ARCH_AT91=y | |
CONFIG_SYS_TEXT_BASE=0x26f00000 | |
CONFIG_TARGET_AT91SAM9N12EK=y | |
CONFIG_SYS_MALLOC_F_LEN=0x2000 | |
CONFIG_ENV_SIZE=0x4000 | |
CONFIG_NR_DRAM_BANKS=1 | |
CONFIG_DEBUG_UART_BOARD_INIT=y | |
CONFIG_DEBUG_UART_BASE=0xfffff200 | |
CONFIG_DEBUG_UART_CLOCK=132000000 | |
CONFIG_DEBUG_UART=y | |
CONFIG_SD_BOOT=y | |
CONFIG_BOOTDELAY=3 | |
# CONFIG_CONSOLE_MUX is not set | |
CONFIG_SYS_CONSOLE_IS_IN_ENV=y | |
# CONFIG_DISPLAY_BOARDINFO is not set | |
CONFIG_HUSH_PARSER=y | |
CONFIG_SYS_PROMPT="U-Boot> " | |
CONFIG_CMD_BOOTZ=y | |
# CONFIG_CMD_FLASH is not set | |
CONFIG_CMD_MMC=y | |
CONFIG_CMD_NAND=y | |
CONFIG_CMD_NAND_TRIMFFS=y | |
CONFIG_CMD_SF=y | |
CONFIG_CMD_USB=y | |
# CONFIG_CMD_SETEXPR is not set | |
CONFIG_CMD_DHCP=y | |
CONFIG_CMD_PING=y | |
CONFIG_CMD_FAT=y | |
CONFIG_CMD_MTDPARTS=y | |
CONFIG_MTDIDS_DEFAULT="nand0=atmel_nand" | |
CONFIG_MTDPARTS_DEFAULT="mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs)" | |
CONFIG_OF_CONTROL=y | |
CONFIG_DEFAULT_DEVICE_TREE="at91sam9n12ek" | |
CONFIG_ENV_IS_IN_FAT=y | |
CONFIG_DM=y | |
CONFIG_CLK=y | |
CONFIG_CLK_AT91=y | |
CONFIG_DM_GPIO=y | |
CONFIG_AT91_GPIO=y | |
CONFIG_DM_MMC=y | |
CONFIG_GENERIC_ATMEL_MCI=y | |
CONFIG_NAND=y | |
# CONFIG_SYS_NAND_USE_FLASH_BBT is not set | |
CONFIG_NAND_ATMEL=y | |
CONFIG_DM_SPI_FLASH=y | |
CONFIG_SPI_FLASH=y | |
CONFIG_SF_DEFAULT_SPEED=30000000 | |
CONFIG_SPI_FLASH_ATMEL=y | |
CONFIG_PINCTRL=y | |
CONFIG_PINCTRL_AT91=y | |
CONFIG_DM_SERIAL=y | |
CONFIG_DEBUG_UART_ATMEL=y | |
CONFIG_DEBUG_UART_ANNOUNCE=y | |
CONFIG_ATMEL_USART=y | |
CONFIG_SPI=y | |
CONFIG_DM_SPI=y | |
CONFIG_TIMER=y | |
CONFIG_ATMEL_PIT_TIMER=y | |
CONFIG_USB=y | |
CONFIG_DM_USB=y | |
CONFIG_USB_STORAGE=y | |
CONFIG_LCD=y |