| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Copyright (c) 2017 Toradex, Inc. |
| * |
| * Configuration settings for the Toradex Apalis TK1 modules. |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| #include <linux/sizes.h> |
| |
| #include "tegra124-common.h" |
| |
| /* Board-specific serial config */ |
| #define CONFIG_TEGRA_ENABLE_UARTA |
| #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE |
| |
| #define FDT_MODULE "apalis-v1.2" |
| #define FDT_MODULE_V1_0 "apalis" |
| |
| /* |
| * Custom Distro Boot configuration: |
| * 1. 8bit SD port (MMC1) |
| * 2. 4bit SD port (MMC2) |
| * 3. eMMC (MMC0) |
| */ |
| #define BOOT_TARGET_DEVICES(func) \ |
| func(MMC, mmc, 1) \ |
| func(MMC, mmc, 2) \ |
| func(MMC, mmc, 0) \ |
| func(USB, usb, 0) \ |
| func(PXE, pxe, na) \ |
| func(DHCP, dhcp, na) |
| |
| #define DFU_ALT_EMMC_INFO "apalis-tk1.img raw 0x0 0x500 mmcpart 1; " \ |
| "boot part 0 1 mmcpart 0; " \ |
| "rootfs part 0 2 mmcpart 0; " \ |
| "zImage fat 0 1 mmcpart 0; " \ |
| "tegra124-apalis-eval.dtb fat 0 1 mmcpart 0" |
| |
| #define UBOOT_UPDATE \ |
| "uboot_hwpart=1\0" \ |
| "uboot_blk=0\0" \ |
| "set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \ |
| "setexpr blkcnt ${blkcnt} / 0x200\0" \ |
| "update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \ |
| "mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \ |
| |
| #define BOARD_EXTRA_ENV_SETTINGS \ |
| "boot_file=zImage\0" \ |
| "boot_script_dhcp=boot.scr\0" \ |
| "console=ttyS0\0" \ |
| "defargs=lp0_vec=2064@0xf46ff000 core_edp_mv=1150 core_edp_ma=4000 " \ |
| "usb_port_owner_info=2 lane_owner_info=6 emc_max_dvfs=0 " \ |
| "user_debug=30 pcie_aspm=off\0" \ |
| "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \ |
| "fdt_board=eval\0" \ |
| "fdt_fixup=;\0" \ |
| "fdt_module=" FDT_MODULE "\0" \ |
| UBOOT_UPDATE \ |
| "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \ |
| "00:14:2d:00:00:00; fi; pci enum && tftpboot ${loadaddr} " \ |
| "flash_eth.img && source ${loadaddr}\0" \ |
| "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; " \ |
| "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img " \ |
| "|| setenv drive 2; mmc rescan; load ${interface} ${drive}:1 " \ |
| "${loadaddr} flash_blk.img && " \ |
| "source ${loadaddr}\0" \ |
| "setup=setenv setupargs igb_mac=${ethaddr} " \ |
| "consoleblank=0 no_console_suspend=1 console=tty1 " \ |
| "console=${console},${baudrate}n8 debug_uartport=lsport,0 " \ |
| "${memargs}\0" \ |
| "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \ |
| "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \ |
| "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \ |
| "source ${loadaddr}\0" \ |
| "vidargs=fbcon=map:1\0" |
| |
| #include "tegra-common-post.h" |
| |
| #endif /* __CONFIG_H */ |