| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Board configuration file for Variscite DART-6UL Evaluation Kit |
| * Copyright (C) 2019 Parthiban Nallathambi <parthitce@gmail.com> |
| */ |
| #ifndef __DART_6UL_H |
| #define __DART_6UL_H |
| |
| #include <linux/sizes.h> |
| #include <linux/stringify.h> |
| #include "mx6_common.h" |
| |
| /* NAND pin conflicts with usdhc2 */ |
| #ifdef CONFIG_CMD_NAND |
| #define CFG_SYS_FSL_USDHC_NUM 1 |
| #else |
| #define CFG_SYS_FSL_USDHC_NUM 2 |
| #endif |
| |
| #ifdef CONFIG_CMD_NET |
| #define CONFIG_FEC_ENET_DEV 0 |
| #endif |
| |
| /* Environment settings */ |
| |
| /* Environment in SD */ |
| #define MMC_ROOTFS_DEV 0 |
| #define MMC_ROOTFS_PART 2 |
| |
| /* Console configs */ |
| #define CONFIG_MXC_UART_BASE UART1_BASE |
| |
| /* MMC Configs */ |
| |
| #define CFG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR |
| |
| /* I2C configs */ |
| |
| /* Miscellaneous configurable options */ |
| |
| /* Physical Memory Map */ |
| #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR |
| #define PHYS_SDRAM_SIZE SZ_512M |
| |
| #define CFG_SYS_SDRAM_BASE PHYS_SDRAM |
| #define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR |
| #define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE |
| |
| /* USB Configs */ |
| #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) |
| #define CONFIG_MXC_USB_FLAGS 0 |
| |
| #define ENV_MMC \ |
| "mmcdev=" __stringify(MMC_ROOTFS_DEV) "\0" \ |
| "mmcpart=" __stringify(MMC_ROOTFS_PART) "\0" \ |
| "fitpart=1\0" \ |
| "bootdelay=3\0" \ |
| "silent=1\0" \ |
| "optargs=rw rootwait\0" \ |
| "mmcautodetect=yes\0" \ |
| "mmcrootfstype=ext4\0" \ |
| "mmcfit_name=fitImage\0" \ |
| "mmcloadfit=fatload mmc ${mmcdev}:${fitpart} ${fit_addr} " \ |
| "${mmcfit_name}\0" \ |
| "mmcargs=setenv bootargs " \ |
| "root=/dev/mmcblk${mmcdev}p${mmcpart} ${optargs} " \ |
| "console=${console} rootfstype=${mmcrootfstype}\0" \ |
| "mmc_mmc_fit=run mmcloadfit;run mmcargs addcon; bootm ${fit_addr}\0" \ |
| |
| /* Default environment */ |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "fdt_high=0xffffffff\0" \ |
| "console=ttymxc0,115200n8\0" \ |
| "addcon=setenv bootargs ${bootargs} console=${console},${baudrate}\0" \ |
| "fit_addr=0x82000000\0" \ |
| ENV_MMC |
| |
| #define BOOT_TARGET_DEVICES(func) \ |
| func(MMC, mmc, 0) \ |
| func(MMC, mmc, 1) \ |
| func(DHCP, dhcp, na) |
| |
| #include <config_distro_bootcmd.h> |
| #endif /* __DART_6UL_H */ |